[PATCH 7/7] drm/bridge: tc358767: use DP connector if no panel set

From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Archit Taneja <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	dri-devel@lists.freedesktop.org,
	Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Subject: [PATCH 7/7] drm/bridge: tc358767: use DP connector if no panel set
Date: Mon, 29 Oct 2018 13:47:01 +0200	[thread overview]
Message-ID: <20181029114701.26409-8-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <20181029114701.26409-1-tomi.valkeinen@ti.com>

tc358767 driver sets the connector type always to eDP.

This patch sets the type to DP if there is no panel defined, which
implies that there's a DP connector on the board.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index be013bd7b30b..db93d927cb9a 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1207,7 +1207,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 	/* Create eDP connector */
 	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
 	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
-				 DRM_MODE_CONNECTOR_eDP);
+				 tc->panel ? DRM_MODE_CONNECTOR_eDP :
+				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret)
 		return ret;
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
