From: Maxime Ripard <maxime@cerno.tech>
To: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-i2c@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
linux@endlessm.com, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Date: Tue, 28 Apr 2020 18:21:52 +0200 [thread overview]
Message-ID: <20200428162152.ztsqp7nxqbwqrm6r@gilmour.lan> (raw)
In-Reply-To: <20200427072342.5499-1-jian-hong@endlessm.com>
[-- Attachment #1.1: Type: text/plain, Size: 5925 bytes --]
Hi,
On Mon, Apr 27, 2020 at 03:23:42PM +0800, Jian-Hong Pan wrote:
> Hi Maxime,
>
> Thanks for your V2 patch series! I'm testing it.
>
> This patch series is applied upon mainline kernel 5.7-rc2 cleanly and built.
> System can boot into console text mode, but no graphic UI.
>
> Get the error in vc5_hdmi_phy_init(), and full dmesg is at [1]:
>
> [ 5.587543] vc4_hdmi fef00700.hdmi: Unknown register ID 46
> [ 5.587700] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi' already present!
> [ 5.588070] vc4_hdmi fef00700.hdmi: vc4-hdmi-hifi <-> fef00700.hdmi mapping ok
> [ 5.588076] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name!
> [ 5.588263] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
> [ 5.588299] vc4_hdmi fef05700.hdmi: Unknown register ID 46
> [ 5.588373] debugfs: Directory 'vc4-hdmi' with parent 'asoc' already present!
> [ 5.588673] vc4_hdmi fef05700.hdmi: vc4-hdmi-hifi <-> fef05700.hdmi mapping ok
> [ 5.588677] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name!
> [ 5.588809] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
> [ 5.588854] vc4-drm gpu: bound fe806000.vec (ops vc4_vec_ops)
> [ 5.588897] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
> [ 5.588934] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
> [ 5.588990] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
> [ 5.589030] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
> [ 5.589074] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
> [ 5.589106] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
> [ 5.589145] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops)
> [ 5.589294] checking generic (3e513000 6d8c00) vs hw (0 ffffffffffffffff)
> [ 5.589297] fb0: switching to vc4drmfb from simple
> [ 5.589433] Console: switching to colour dummy device 80x25
> [ 5.589481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 5.589816] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
> [ 5.601079] ------------[ cut here ]------------
> [ 5.601095] WARNING: CPU: 2 PID: 127 at drivers/gpu/drm/vc4/vc4_hdmi_phy.c:413 vc5_hdmi_phy_init+0x7ac/0x2078
> [ 5.601097] Modules linked in:
> [ 5.601103] CPU: 2 PID: 127 Comm: kworker/2:1 Not tainted 5.7.0-rc2-00091-ga181df59a930 #7
> [ 5.601105] Hardware name: Raspberry Pi 4 Model B (DT)
> [ 5.601112] Workqueue: events deferred_probe_work_func
> [ 5.601116] pstate: 20000005 (nzCv daif -PAN -UAO)
> [ 5.601119] pc : vc5_hdmi_phy_init+0x7ac/0x2078
> [ 5.601123] lr : vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> [ 5.601124] sp : ffff80001217b410
> [ 5.601126] x29: ffff80001217b410 x28: ffff0000ec6370f0
> [ 5.601129] x27: ffff0000f650d400 x26: 000000008a500000
> [ 5.601132] x25: ffff8000113b4ac0 x24: 0000000000002060
> [ 5.601135] x23: 000000000a500000 x22: 0000000000000300
> [ 5.601137] x21: 0000000008d9ee20 x20: ffff0000ec535080
> [ 5.601140] x19: 000000010989e7c0 x18: 0000000000000000
> [ 5.601142] x17: 0000000000000001 x16: 0000000000005207
> [ 5.601145] x15: 00004932ad293c92 x14: 0000000000000137
> [ 5.601147] x13: ffff800010015000 x12: 0000000000000001
> [ 5.601150] x11: 0000000000000001 x10: 0000000000000000
> [ 5.601152] x9 : 0000000000000000 x8 : ffff800010015038
> [ 5.601154] x7 : 0000000000000001 x6 : ffff80001217b368
> [ 5.601157] x5 : 0000000000000000 x4 : 000000000000004c
> [ 5.601159] x3 : 0000000000000000 x2 : ffff8000113b4ac0
> [ 5.601162] x1 : ffff8000120c5f44 x0 : 00000000dc8984ff
> [ 5.601164] Call trace:
> [ 5.601169] vc5_hdmi_phy_init+0x7ac/0x2078
> [ 5.601172] vc4_hdmi_encoder_enable+0x1b8/0x1ac0
> [ 5.601176] drm_atomic_helper_commit_modeset_enables+0x224/0x248
> [ 5.601179] vc4_atomic_complete_commit+0x400/0x558
> [ 5.601182] vc4_atomic_commit+0x1e0/0x200
> [ 5.601185] drm_atomic_commit+0x4c/0x60
> [ 5.601190] drm_client_modeset_commit_atomic.isra.0+0x17c/0x238
> [ 5.601192] drm_client_modeset_commit_locked+0x5c/0x198
> [ 5.601195] drm_client_modeset_commit+0x30/0x58
> [ 5.601201] drm_fb_helper_restore_fbdev_mode_unlocked+0x78/0xe0
> [ 5.601204] drm_fb_helper_set_par+0x30/0x68
> [ 5.601208] fbcon_init+0x3d4/0x598
> [ 5.601212] visual_init+0xb0/0x108
> [ 5.601214] do_bind_con_driver+0x1d0/0x3a8
> [ 5.601217] do_take_over_console+0x144/0x208
> [ 5.601219] do_fbcon_takeover+0x68/0xd8
> [ 5.601222] fbcon_fb_registered+0x100/0x118
> [ 5.601226] register_framebuffer+0x1f4/0x338
> [ 5.601229] __drm_fb_helper_initial_config_and_unlock+0x2f8/0x4a0
> [ 5.601232] drm_fbdev_client_hotplug+0xd4/0x1b0
> [ 5.601235] drm_fbdev_generic_setup+0xb0/0x130
> [ 5.601238] vc4_drm_bind+0x184/0x1a0
> [ 5.601241] try_to_bring_up_master+0x168/0x1c8
> [ 5.601244] __component_add+0xa4/0x170
> [ 5.601246] component_add+0x14/0x20
> [ 5.601248] vc4_vec_dev_probe+0x20/0x30
> [ 5.601252] platform_drv_probe+0x54/0xa8
> [ 5.601254] really_probe+0xd8/0x320
> [ 5.601256] driver_probe_device+0x58/0xf0
> [ 5.601258] __device_attach_driver+0x84/0xc8
> [ 5.601263] bus_for_each_drv+0x78/0xc8
> [ 5.601265] __device_attach+0xe4/0x140
> [ 5.601267] device_initial_probe+0x14/0x20
> [ 5.601269] bus_probe_device+0x9c/0xa8
> [ 5.601271] deferred_probe_work_func+0x74/0xb0
> [ 5.601276] process_one_work+0x1bc/0x338
> [ 5.601279] worker_thread+0x1f8/0x428
> [ 5.601282] kthread+0x138/0x158
> [ 5.601286] ret_from_fork+0x10/0x1c
> [ 5.601288] ---[ end trace cfba0996218c3f3d ]---
Thanks for testing!
Do you have a bit more details regarding your setup? Was it connected to an
external display? If so, do you know the resolution it was trying to setup?
Thanks!
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-04-29 6:45 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 15:33 [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 01/91] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-04-24 16:13 ` Wolfram Sang
2020-04-24 17:07 ` Florian Fainelli
2020-04-24 19:04 ` Wolfram Sang
2020-04-26 7:44 ` Wolfram Sang
2020-04-24 15:33 ` [PATCH v2 02/91] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 03/91] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-05-11 21:47 ` Rob Herring
2020-05-13 8:13 ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 04/91] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-04-27 11:24 ` Nicolas Saenz Julienne
2020-04-28 13:50 ` Maxime Ripard
2020-04-30 16:27 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 05/91] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-04-30 16:19 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 06/91] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-05-27 6:47 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 07/91] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 08/91] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 09/91] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 10/91] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 11/91] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 12/91] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 13/91] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 14/91] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 15/91] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-05-27 6:49 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 16/91] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 17/91] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 18/91] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 19/91] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 20/91] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-05-04 12:05 ` Nicolas Saenz Julienne
2020-05-15 8:19 ` Maxime Ripard
2020-05-21 9:13 ` Nicolas Saenz Julienne
2020-05-27 7:03 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 21/91] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 22/91] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-05-13 11:52 ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 23/91] reset: simple: Add reset callback Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-04-24 15:34 ` [PATCH v2 24/91] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 25/91] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-05-27 7:06 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 26/91] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-04-27 21:32 ` Rob Herring
2020-04-24 15:34 ` [PATCH v2 28/91] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 29/91] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 30/91] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 31/91] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 32/91] drm/vc4: drv: Add include guards Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 33/91] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 34/91] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 35/91] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 36/91] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 37/91] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 38/91] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 39/91] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 40/91] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 41/91] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 42/91] drm/vc4: plane: Create more planes Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 43/91] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 44/91] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 45/91] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 46/91] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 47/91] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 48/91] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 49/91] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 50/91] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 51/91] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 52/91] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 53/91] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 54/91] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 55/91] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 56/91] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 57/91] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 58/91] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 59/91] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 60/91] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 61/91] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 62/91] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 63/91] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 64/91] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 65/91] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 66/91] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 67/91] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 68/91] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 69/91] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 70/91] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 71/91] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 72/91] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-04-25 21:06 ` Stefan Wahren
2020-04-24 15:34 ` [PATCH v2 73/91] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 74/91] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 76/91] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 77/91] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 78/91] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 79/91] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-04-25 21:26 ` Stefan Wahren
2020-04-28 15:57 ` Maxime Ripard
2020-04-28 16:19 ` Dave Stevenson
2020-04-24 15:35 ` [PATCH v2 80/91] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 81/91] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 82/91] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 83/91] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 84/91] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 85/91] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 86/91] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 87/91] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 88/91] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 89/91] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-07 17:36 ` Stefan Wahren
2020-04-24 15:35 ` [PATCH v2 90/91] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-11 21:50 ` Rob Herring
2020-05-13 8:16 ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 91/91] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-04-25 20:54 ` Stefan Wahren
2020-04-28 14:11 ` Maxime Ripard
2020-04-27 7:23 ` [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin Jian-Hong Pan
2020-04-28 16:21 ` Maxime Ripard [this message]
2020-05-04 6:35 ` Jian-Hong Pan
2020-05-07 17:21 ` Maxime Ripard
2020-05-08 6:20 ` Jian-Hong Pan
2020-05-11 3:12 ` Jian-Hong Pan
2020-05-25 11:11 ` Maxime Ripard
2020-05-26 10:20 ` Maxime Ripard
2020-05-27 3:49 ` Daniel Drake
2020-05-27 9:13 ` Maxime Ripard
2020-05-27 9:15 ` Daniel Drake
2020-05-28 7:30 ` Maxime Ripard
2020-06-01 7:58 ` Jian-Hong Pan
2020-06-02 11:04 ` Maxime Ripard
2020-06-05 8:44 ` Jian-Hong Pan
2020-06-29 14:21 ` Maxime Ripard
2020-06-30 8:26 ` Jian-Hong Pan
2020-07-03 12:56 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200428162152.ztsqp7nxqbwqrm6r@gilmour.lan \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jian-hong@endlessm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux@endlessm.com \
--cc=nsaenzjulienne@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).