From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: devicetree@vger.kernel.org, Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Kamal Dasu <kdasu.kdev@gmail.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-clk@vger.kernel.org, linux-i2c@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
Wolfram Sang <wsa@the-dreams.de>,
Phil Elwell <phil@raspberrypi.com>,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline
Date: Fri, 24 Apr 2020 17:33:41 +0200 [thread overview]
Message-ID: <cover.d1e741d37e43e1ba2d2ecd93fc81d42a6df99d14.1587742492.git-series.maxime@cerno.tech> (raw)
Hi everyone,
Here's a (pretty long) series to introduce support in the VC4 DRM driver
for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
The main differences are that there's two HDMI controllers and that there's
more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
have only 3 FIFOs. Both of those differences are breaking a bunch of
expectations in the driver, so we first need a good bunch of cleanup and
reworks to introduce support for the new controllers.
Similarly, the HDMI controller has all its registers shuffled and split in
multiple controllers now, so we need a bunch of changes to support this as
well.
Only the HDMI support is enabled for now (even though the DPI output has
been tested too). There's a couple of rough edges still that should be
addressed in the next versions:
- After a modeset, it's likely that the pixels will be shifted by one.
- Dual output doesn't work
- The transposer (and thus writeback) doesn't work either and conflicts
with the output mux too.
Let me know if you have any comments
Maxime
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: devicetree@vger.kernel.org
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Changes from v1:
- Rebased on top of 5.7-rc1
- Run checkpatch
- Added audio support
- Fixed some HDMI timeouts
- Swiched to clk_hw_register_gate_parent_data
- Reorder Kconfig symbols in drivers/i2c/busses
- Make the firmware clocks a child of the firmware node
- Switch DVP clock driver to clk_hw interface
- constify raspberrypi_clk_data in raspberrypi_clock_property
- Don't mark firmware clocks as IGNORE_UNUSED
- Change from reset_ms to reset_us in reset-simple, and add a bit more
comments
- Remove generic clk patch to test if a NULL pointer is returned
- Removed misleading message in the is_prepared renaming patch commit
message
- Constify HDMI controller variants
- Fix a bug in the allocation size of the clk data array
- Added a mention in the DT binding conversion patches about the breakage
- Merged a few fixes from kbuild
- Fixed a few bisection and CEC build issues
- Collected Acked-by and Reviewed-by
- Change Dave email address to raspberrypi.com
Dave Stevenson (6):
drm/vc4: Add support for the BCM2711 HVS5
drm/vc4: plane: Improve LBM usage
drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers
drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming
drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.
drm/vc4: hdmi: Add audio-related callbacks
Florian Fainelli (1):
dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML
Maxime Ripard (84):
i2c: brcmstb: Allow to compile it on BCM2835
dt-bindings: clock: Add a binding for the RPi Firmware clocks
firmware: rpi: Only create clocks device if we don't have a node for it
clk: bcm: rpi: Allow the driver to be probed by DT
clk: bcm: rpi: Statically init clk_init_data
clk: bcm: rpi: Use clk_hw_register for pllb_arm
clk: bcm: rpi: Remove global pllb_arm clock pointer
clk: bcm: rpi: Make sure pllb_arm is removed
clk: bcm: rpi: Remove pllb_arm_lookup global pointer
clk: bcm: rpi: Switch to clk_hw_register_clkdev
clk: bcm: rpi: Make sure the clkdev lookup is removed
clk: bcm: rpi: Create a data structure for the clocks
clk: bcm: rpi: Add clock id to data
clk: bcm: rpi: Pass the clocks data to the firmware function
clk: bcm: rpi: Rename is_prepared function
clk: bcm: rpi: Split pllb clock hooks
clk: bcm: rpi: Make the PLLB registration function return a clk_hw
clk: bcm: rpi: Add DT provider for the clocks
clk: bcm: rpi: Discover the firmware clocks
ARM: dts: bcm2711: Add firmware clocks node
reset: Move reset-simple header out of drivers/reset
reset: simple: Add reset callback
dt-bindings: clock: Add BCM2711 DVP binding
clk: bcm: Add BCM2711 DVP driver
ARM: dts: bcm2711: Add HDMI DVP
dt-bindings: display: Convert VC4 bindings to schemas
dt-bindings: display: vc4: dpi: Add missing clock-names property
dt-bindings: display: vc4: dsi: Add missing clock properties
dt-bindings: display: vc4: hdmi: Add missing clock-names property
dt-bindings: display: vc4: Document BCM2711 VC5
drm/vc4: drv: Add include guards
drm/vc4: drv: Support BCM2711
dt-bindings: display: Add support for the BCM2711 HVS
drm/vc4: hvs: Boost the core clock during modeset
drm/vc4: plane: Move planes creation to its own function
drm/vc4: plane: Move additional planes creation to driver
drm/vc4: plane: Register all the planes at once
drm/vc4: plane: Create overlays for any CRTC
drm/vc4: plane: Create more planes
drm/vc4: crtc: Rename SoC data structures
drm/vc4: crtc: Move crtc state to common header
drm/vc4: crtc: Deal with different number of pixel per clock
drm/vc4: crtc: Use a shared interrupt
drm/vc4: crtc: Turn static const variable into a define
drm/vc4: crtc: Move the cob allocation outside of bind
drm/vc4: crtc: Rename HVS channel to output
drm/vc4: crtc: Use local chan variable
drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
drm/vc4: crtc: Assign output to channel automatically
drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
drm/vc4: crtc: Add function to compute FIFO level bits
drm/vc4: crtc: Rename HDMI encoder type to HDMI0
drm/vc4: crtc: Add HDMI1 encoder type
drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt
drm/vc4: crtc: Disable color management for HVS5
dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
drm/vc4: crtc: Add BCM2711 pixelvalves
drm/vc4: hdmi: Use debugfs private field
drm/vc4: hdmi: Move structure to header
drm/vc4: hdmi: rework connectors and encoders
drm/vc4: hdmi: Remove DDC argument to connector_init
drm/vc4: hdmi: Rename hdmi to vc4_hdmi
drm/vc4: hdmi: Move accessors to vc4_hdmi
drm/vc4: hdmi: Use local vc4_hdmi directly
drm/vc4: hdmi: Add container_of macros for encoders and connectors
drm/vc4: hdmi: Pass vc4_hdmi to CEC code
drm/vc4: hdmi: Remove vc4_dev hdmi pointer
drm/vc4: hdmi: Remove vc4_hdmi_connector
drm/vc4: hdmi: Introduce resource init and variant
drm/vc4: hdmi: Implement a register layout abstraction
drm/vc4: hdmi: Add reset callback
drm/vc4: hdmi: Add PHY init and disable function
drm/vc4: hdmi: Add PHY RNG enable / disable function
drm/vc4: hdmi: Add a CSC setup callback
drm/vc4: hdmi: Store the encoder type in the variant structure
drm/vc4: hdmi: Deal with multiple debugfs files
drm/vc4: hdmi: Move CEC init to its own function
drm/vc4: hdmi: Add CEC support flag
drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
drm/vc4: hdmi: Support the BCM2711 HDMI controllers
dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
ARM: dts: bcm2711: Enable the display pipeline
Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt | 14 +-
Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 59 +++-
Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml | 47 ++-
Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +--------
Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 +++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 72 +++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 84 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 80 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 53 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 45 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 35 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++-
MAINTAINERS | 2 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 51 ++-
arch/arm/boot/dts/bcm2711.dtsi | 130 +++++-
drivers/clk/bcm/Kconfig | 1 +-
drivers/clk/bcm/Makefile | 1 +-
drivers/clk/bcm/clk-bcm2711-dvp.c | 127 ++++++-
drivers/clk/bcm/clk-raspberrypi.c | 280 +++++++++----
drivers/firmware/raspberrypi.c | 17 +-
drivers/gpu/drm/vc4/Makefile | 1 +-
drivers/gpu/drm/vc4/vc4_crtc.c | 328 +++++++++------
drivers/gpu/drm/vc4/vc4_drv.c | 5 +-
drivers/gpu/drm/vc4/vc4_drv.h | 58 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 1536 ++++++++++++++++++++++++++++++++++++++++++------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 179 ++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 508 ++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 451 +++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hvs.c | 25 +-
drivers/gpu/drm/vc4/vc4_kms.c | 181 +++++++-
drivers/gpu/drm/vc4/vc4_plane.c | 271 +++++++++----
drivers/gpu/drm/vc4/vc4_regs.h | 173 +++-----
drivers/i2c/busses/Kconfig | 4 +-
drivers/reset/reset-simple.c | 27 +-
drivers/reset/reset-simple.h | 41 +--
drivers/reset/reset-socfpga.c | 3 +-
drivers/reset/reset-sunxi.c | 3 +-
drivers/reset/reset-uniphier-glue.c | 3 +-
include/linux/reset/reset-simple.h | 47 ++-
include/soc/bcm2835/raspberrypi-firmware.h | 5 +-
42 files changed, 4109 insertions(+), 1244 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h
delete mode 100644 drivers/reset/reset-simple.h
create mode 100644 include/linux/reset/reset-simple.h
base-commit: cb3692197b5da2fb898335eec1640db14d92e52e
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-04-24 20:10 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 15:33 Maxime Ripard [this message]
2020-04-24 15:33 ` [PATCH v2 01/91] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-04-24 16:13 ` Wolfram Sang
2020-04-24 17:07 ` Florian Fainelli
2020-04-24 19:04 ` Wolfram Sang
2020-04-26 7:44 ` Wolfram Sang
2020-04-24 15:33 ` [PATCH v2 02/91] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 03/91] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-05-11 21:47 ` Rob Herring
2020-05-13 8:13 ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 04/91] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-04-27 11:24 ` Nicolas Saenz Julienne
2020-04-28 13:50 ` Maxime Ripard
2020-04-30 16:27 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 05/91] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-04-30 16:19 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 06/91] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-05-27 6:47 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 07/91] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 08/91] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 09/91] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 10/91] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 11/91] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 12/91] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 13/91] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 14/91] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 15/91] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-05-27 6:49 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 16/91] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 17/91] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 18/91] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 19/91] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 20/91] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-05-04 12:05 ` Nicolas Saenz Julienne
2020-05-15 8:19 ` Maxime Ripard
2020-05-21 9:13 ` Nicolas Saenz Julienne
2020-05-27 7:03 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 21/91] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 22/91] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-05-13 11:52 ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 23/91] reset: simple: Add reset callback Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-04-24 15:34 ` [PATCH v2 24/91] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 25/91] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-05-27 7:06 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 26/91] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-04-27 21:32 ` Rob Herring
2020-04-24 15:34 ` [PATCH v2 28/91] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 29/91] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 30/91] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 31/91] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 32/91] drm/vc4: drv: Add include guards Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 33/91] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 34/91] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 35/91] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 36/91] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 37/91] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 38/91] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 39/91] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 40/91] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 41/91] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 42/91] drm/vc4: plane: Create more planes Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 43/91] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 44/91] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 45/91] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 46/91] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 47/91] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 48/91] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 49/91] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 50/91] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 51/91] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 52/91] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 53/91] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 54/91] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 55/91] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 56/91] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 57/91] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 58/91] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 59/91] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 60/91] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 61/91] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 62/91] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 63/91] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 64/91] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 65/91] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 66/91] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 67/91] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 68/91] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 69/91] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 70/91] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 71/91] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 72/91] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-04-25 21:06 ` Stefan Wahren
2020-04-24 15:34 ` [PATCH v2 73/91] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 74/91] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 76/91] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 77/91] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 78/91] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 79/91] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-04-25 21:26 ` Stefan Wahren
2020-04-28 15:57 ` Maxime Ripard
2020-04-28 16:19 ` Dave Stevenson
2020-04-24 15:35 ` [PATCH v2 80/91] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 81/91] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 82/91] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 83/91] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 84/91] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 85/91] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 86/91] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 87/91] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 88/91] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 89/91] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-07 17:36 ` Stefan Wahren
2020-04-24 15:35 ` [PATCH v2 90/91] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-11 21:50 ` Rob Herring
2020-05-13 8:16 ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 91/91] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-04-25 20:54 ` Stefan Wahren
2020-04-28 14:11 ` Maxime Ripard
2020-04-27 7:23 ` [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin Jian-Hong Pan
2020-04-28 16:21 ` Maxime Ripard
2020-05-04 6:35 ` Jian-Hong Pan
2020-05-07 17:21 ` Maxime Ripard
2020-05-08 6:20 ` Jian-Hong Pan
2020-05-11 3:12 ` Jian-Hong Pan
2020-05-25 11:11 ` Maxime Ripard
2020-05-26 10:20 ` Maxime Ripard
2020-05-27 3:49 ` Daniel Drake
2020-05-27 9:13 ` Maxime Ripard
2020-05-27 9:15 ` Daniel Drake
2020-05-28 7:30 ` Maxime Ripard
2020-06-01 7:58 ` Jian-Hong Pan
2020-06-02 11:04 ` Maxime Ripard
2020-06-05 8:44 ` Jian-Hong Pan
2020-06-29 14:21 ` Maxime Ripard
2020-06-30 8:26 ` Jian-Hong Pan
2020-07-03 12:56 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.d1e741d37e43e1ba2d2ecd93fc81d42a6df99d14.1587742492.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=kdasu.kdev@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tim.gover@raspberrypi.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).