dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	Ryder Lee <ryder.lee@mediatek.com>,
	Frank Wunderlich <frank-w@public-files.de>,
	David Airlie <airlied@linux.ie>,
	chunhui dai <chunhui.dai@mediatek.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/6] arm: dts: mt7623: add display subsystem related device nodes
Date: Tue,  4 Aug 2020 18:55:55 +0200	[thread overview]
Message-ID: <20200804165555.75159-8-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>

From: Ryder Lee <ryder.lee@mediatek.com>

Add display subsystem related device nodes for MT7623.

Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
changed
v3->v4:
  drop display_components which is duplicate of existing mmsys
v2->v3:
  drop bls to dpi routing
---
 arch/arm/boot/dts/mt7623.dtsi                 | 170 ++++++++++++++++++
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  72 ++++++++
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts        |  72 ++++++++
 3 files changed, 314 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a106c0d90a52..f2cb44a69454 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -24,6 +24,11 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpu_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -321,6 +326,25 @@ pwrap: pwrap@1000d000 {
 		clock-names = "spi", "wrap";
 	};
 
+	mipi_tx0: mipi-dphy@10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+	};
+
+	cec: cec@10012000 {
+		compatible = "mediatek,mt7623-cec",
+			     "mediatek,mt8173-cec";
+		reg = <0 0x10012000 0 0xbc>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_CEC>;
+		status = "disabled";
+	};
+
 	cir: cir@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
@@ -369,6 +393,18 @@ apmixedsys: syscon@10209000 {
 		#clock-cells = <1>;
 	};
 
+	hdmi_phy: phy@10209100 {
+		compatible = "mediatek,mt7623-hdmi-phy",
+			     "mediatek,mt2701-hdmi-phy";
+		reg = <0 0x10209100 0 0x24>;
+		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+		clock-names = "pll_ref";
+		clock-output-names = "hdmitx_dig_cts";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	rng: rng@1020f000 {
 		compatible = "mediatek,mt7623-rng";
 		reg = <0 0x1020f000 0 0x1000>;
@@ -568,6 +604,16 @@ bch: ecc@1100e000 {
 		status = "disabled";
 	};
 
+	hdmiddc0: i2c@11013000 {
+		compatible = "mediatek,mt7623-hdmi-ddc",
+			     "mediatek,mt8173-hdmi-ddc";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0 0x11013000 0 0x1C>;
+		clocks = <&pericfg CLK_PERI_I2C3>;
+		clock-names = "ddc-i2c";
+		status = "disabled";
+	};
+
 	nor_flash: spi@11014000 {
 		compatible = "mediatek,mt7623-nor",
 			     "mediatek,mt8173-nor";
@@ -766,6 +812,77 @@ mmsys: syscon@14000000 {
 		#clock-cells = <1>;
 	};
 
+	ovl@14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	rdma0: rdma@14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	wdma@14009000 {
+		compatible = "mediatek,mt7623-disp-wdma",
+			     "mediatek,mt2701-disp-wdma";
+		reg = <0 0x14009000 0 0x1000>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_WDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color@1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi@1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex@1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
 	larb0: larb@14010000 {
 		compatible = "mediatek,mt7623-smi-larb",
 			     "mediatek,mt2701-smi-larb";
@@ -778,6 +895,44 @@ larb0: larb@14010000 {
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
 	};
 
+	rdma1: rdma@14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+		mediatek,larb = <&larb0>;
+	};
+
+	dpi0: dpi@14014000 {
+		compatible = "mediatek,mt7623-dpi",
+			     "mediatek,mt2701-dpi";
+		reg = <0 0x14014000 0 0x1000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+			 <&mmsys CLK_MM_DPI1_ENGINE>,
+			 <&apmixedsys CLK_APMIXED_TVDPLL>;
+		clock-names = "pixel", "engine", "pll";
+		status = "disabled";
+	};
+
+	hdmi0: hdmi@14015000 {
+		compatible = "mediatek,mt7623-hdmi",
+			     "mediatek,mt8173-hdmi";
+		reg = <0 0x14015000 0 0x400>;
+		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+			 <&mmsys CLK_MM_HDMI_PLL>,
+			 <&mmsys CLK_MM_HDMI_AUDIO>,
+			 <&mmsys CLK_MM_HDMI_SPDIF>;
+		clock-names = "pixel", "pll", "bclk", "spdif";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		mediatek,syscon-hdmi = <&mmsys 0x900>;
+		cec = <&cec>;
+		status = "disabled";
+	};
+
 	imgsys: syscon@15000000 {
 		compatible = "mediatek,mt7623-imgsys",
 			     "mediatek,mt2701-imgsys",
@@ -1102,6 +1257,21 @@ pins-cir {
 		};
 	};
 
+	hdmi_pins_a: hdmi-default {
+		pins-hdmi {
+			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	hdmi_ddc_pins_a: hdmi_ddc-default {
+		pins-hdmi-ddc {
+			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+		};
+	};
+
 	i2c0_pins_a: i2c0-default {
 		pins-i2c0 {
 			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f90f38c..b1c83e919015 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	cpus {
 		cpu@0 {
 			proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,18 @@ memory@80000000 {
 	};
 };
 
+&bls {
+	status = "okay";
+};
+
 &btif {
 	status = "okay";
 };
 
+&cec {
+	status = "okay";
+};
+
 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +149,21 @@ &crypto {
 	status = "okay";
 };
 
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
 &eth {
 	status = "okay";
 
@@ -199,6 +235,42 @@ fixed-link {
 	};
 };
 
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 0447748f9fa0..7e3ded7d9e7d 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	cpus {
 		cpu@0 {
 			proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,18 @@ sound {
 	};
 };
 
+&bls {
+	status = "okay";
+};
+
 &btif {
 	status = "okay";
 };
 
+&cec {
+	status = "okay";
+};
+
 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +141,21 @@ &crypto {
 	status = "okay";
 };
 
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
 &eth {
 	status = "okay";
 
@@ -203,6 +239,42 @@ fixed-link {
 	};
 };
 
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-08-05  7:14 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-04 16:55 [PATCH v4 0/6] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-04 17:18   ` Aw: " Frank Wunderlich
2020-08-04 17:22     ` Rob Herring
2020-08-04 23:27   ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4] net: ethernet: mtk_eth_soc: fix MTU warnings Frank Wunderlich
2020-08-04 17:20   ` Aw: " Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 2/6] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-04 23:01   ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4 3/6] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 4/6] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 5/6] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich [this message]
2020-08-04 17:24   ` [PATCH v4 6/6] arm: dts: mt7623: add display subsystem related device nodes David Woodhouse
2020-08-04 17:40     ` Aw: " Frank Wunderlich
2020-08-04 18:02       ` David Woodhouse
2020-08-05  7:27         ` Aw: " Frank Wunderlich
2020-08-05  8:36           ` David Woodhouse
2020-08-05  8:49             ` Aw: " Frank Wunderlich
2020-08-05 11:27               ` David Woodhouse
2020-08-05 11:30                 ` [PATCH 1/3] arm: dts: remove stray /dts-v1/ from mt7623a.dtsi David Woodhouse
2020-08-05 11:30                   ` [PATCH 2/3] arm: dts: mt7623: move MT7623N GPU to separate mt7623n.dtsi file David Woodhouse
2020-08-05 13:01                     ` Aw: " Frank Wunderlich
2020-08-05 11:30                   ` [PATCH 3/3] arm: dts: mt7623: add support for UniElec U7623 eMMC David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200804165555.75159-8-linux@fw-web.de \
    --to=linux@fw-web.de \
    --cc=airlied@linux.ie \
    --cc=chunhui.dai@mediatek.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frank-w@public-files.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ryder.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).