From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
To: Frank Wunderlich <linux@fw-web.de>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Frank Wunderlich <frank-w@public-files.de>,
David Airlie <airlied@linux.ie>,
linux-kernel <linux-kernel@vger.kernel.org>,
DRI Development <dri-devel@lists.freedesktop.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@lists.infradead.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Wed, 5 Aug 2020 07:27:48 +0800 [thread overview]
Message-ID: <CAAOTY_-zetZmpTjHJuEr-qrQWP8Rykj3s=Kx6M+U3TO44MNr2Q@mail.gmail.com> (raw)
In-Reply-To: <20200804165555.75159-2-linux@fw-web.de>
Frank Wunderlich <linux@fw-web.de> 於 2020年8月5日 週三 上午12:56寫道:
>
> From: Frank Wunderlich <frank-w@public-files.de>
>
> mt7623 uses mt2701/mt8173 for drm, but have own compatibles
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
> .../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +-
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
> .../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++
> 4 files changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index b91e709db7a4..121220745d46 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -43,7 +43,7 @@ Required properties (all function blocks):
> "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
> "mediatek,<chip>-disp-mutex" - display mutex
> "mediatek,<chip>-disp-od" - overdrive
> - the supported chips are mt2701, mt2712 and mt8173.
> + the supported chips are mt2701, mt7623, mt2712 and mt8173.
> - reg: Physical base address and length of the function block register space
> - interrupts: The interrupt signal from the function block (required, except for
> merge and split function blocks).
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> index 77def4456706..dc1ebd13cc88 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> @@ -7,7 +7,7 @@ output bus.
>
> Required properties:
> - compatible: "mediatek,<chip>-dpi"
> - the supported chips are mt2701 , mt8173 and mt8183.
> + the supported chips are mt2701, mt7623, mt8173 and mt8183.
> - reg: Physical base address and length of the controller's registers
> - interrupts: The interrupt signal from the function block.
> - clocks: device clocks
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index 8e4729de8c85..f06f24d405a5 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -7,7 +7,7 @@ channel output.
>
> Required properties:
> - compatible: "mediatek,<chip>-dsi"
> - the supported chips are mt2701, mt8173 and mt8183.
> +- the supported chips are mt2701, mt7623, mt8173 and mt8183.
> - reg: Physical base address and length of the controller's registers
> - interrupts: The interrupt signal from the function block.
> - clocks: device clocks
> @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
>
> Required properties:
> - compatible: "mediatek,<chip>-mipi-tx"
> - the supported chips are mt2701, mt8173 and mt8183.
> +- the supported chips are mt2701, 7623, mt8173 and mt8183.
> - reg: Physical base address and length of the controller's registers
> - clocks: PLL reference clock
> - clock-output-names: name of the output clock line to the DSI encoder
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> index 7b124242b0c5..6b1c586403e4 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> @@ -6,6 +6,7 @@ its parallel input.
>
> Required properties:
> - compatible: Should be "mediatek,<chip>-hdmi".
> +- the supported chips are mt2701, mt7623 and mt8173
> - reg: Physical base address and length of the controller's registers
> - interrupts: The interrupt signal from the function block.
> - clocks: device clocks
> @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
>
> Required properties:
> - compatible: Should be "mediatek,<chip>-cec"
> +- the supported chips are mt7623 and mt8173
> - reg: Physical base address and length of the controller's registers
> - interrupts: The interrupt signal from the function block.
> - clocks: device clock
> @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
>
> Required properties:
> - compatible: Should be "mediatek,<chip>-hdmi-ddc"
> +- the supported chips are mt7623 and mt8173
> - reg: Physical base address and length of the controller's registers
> - clocks: device clock
> - clock-names: Should be "ddc-i2c".
> @@ -56,6 +59,7 @@ output and drives the HDMI pads.
>
> Required properties:
> - compatible: "mediatek,<chip>-hdmi-phy"
> +- the supported chips are mt2701, mt7623 and mt8173
> - reg: Physical base address and length of the module's registers
> - clocks: PLL reference clock
> - clock-names: must contain "pll_ref"
> --
> 2.25.1
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-08-04 23:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-04 16:55 [PATCH v4 0/6] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-04 17:18 ` Aw: " Frank Wunderlich
2020-08-04 17:22 ` Rob Herring
2020-08-04 23:27 ` Chun-Kuang Hu [this message]
2020-08-04 16:55 ` [PATCH v4] net: ethernet: mtk_eth_soc: fix MTU warnings Frank Wunderlich
2020-08-04 17:20 ` Aw: " Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 2/6] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-04 23:01 ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4 3/6] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 4/6] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 5/6] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 6/6] arm: dts: mt7623: add display subsystem related device nodes Frank Wunderlich
2020-08-04 17:24 ` David Woodhouse
2020-08-04 17:40 ` Aw: " Frank Wunderlich
2020-08-04 18:02 ` David Woodhouse
2020-08-05 7:27 ` Aw: " Frank Wunderlich
2020-08-05 8:36 ` David Woodhouse
2020-08-05 8:49 ` Aw: " Frank Wunderlich
2020-08-05 11:27 ` David Woodhouse
2020-08-05 11:30 ` [PATCH 1/3] arm: dts: remove stray /dts-v1/ from mt7623a.dtsi David Woodhouse
2020-08-05 11:30 ` [PATCH 2/3] arm: dts: mt7623: move MT7623N GPU to separate mt7623n.dtsi file David Woodhouse
2020-08-05 13:01 ` Aw: " Frank Wunderlich
2020-08-05 11:30 ` [PATCH 3/3] arm: dts: mt7623: add support for UniElec U7623 eMMC David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAOTY_-zetZmpTjHJuEr-qrQWP8Rykj3s=Kx6M+U3TO44MNr2Q@mail.gmail.com' \
--to=chunkuang.hu@kernel.org \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=frank-w@public-files.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@fw-web.de \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).