FSTests Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] generic: per-type quota timers set/get test
@ 2020-02-16 18:16 Zorro Lang
  2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-16 18:16 UTC (permalink / raw)
  To: fstests; +Cc: linux-xfs

Set different grace time, make sure each of quota (user, group and
project) timers can be set (by setquota) and get (by repquota)
correctly.

Signed-off-by: Zorro Lang <zlang@redhat.com>
---

Hi,

This case test passed on ext4, but on XFS (xfs-linux for-next branch with
Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
I got below different output:

# diff -u tests/generic/593.out results/generic/593.out.bad
--- tests/generic/593.out       2020-02-15 12:08:49.012651926 -0500
+++ results//generic/593.out.bad        2020-02-16 13:00:58.811815870 -0500
@@ -5,28 +5,28 @@
 *** Report for group quotas on device SCRATCH_DEV
 Block grace time: 7days; Inode grace time: 7days
 *** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 7days; Inode grace time: 7days
 
 2. set group quota timer
 *** Report for user quotas on device SCRATCH_DEV
 Block grace time: 7days; Inode grace time: 7days
 *** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 7days; Inode grace time: 7days
 *** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 7days; Inode grace time: 7days
 
 3. set user quota timer
 *** Report for user quotas on device SCRATCH_DEV
 Block grace time: 00:50; Inode grace time: 01:00
 *** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 00:50; Inode grace time: 01:00
 *** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 00:50; Inode grace time: 01:00
 
 4. cycle mount
 *** Report for user quotas on device SCRATCH_DEV
 Block grace time: 00:50; Inode grace time: 01:00
 *** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 00:50; Inode grace time: 01:00
 *** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 00:50; Inode grace time: 01:00

This looks like totally wrong, can anyone help to take a look at it?

Thanks,
Zorro

 tests/generic/593     | 69 +++++++++++++++++++++++++++++++++++++++++++
 tests/generic/593.out | 32 ++++++++++++++++++++
 tests/generic/group   |  1 +
 3 files changed, 102 insertions(+)
 create mode 100755 tests/generic/593
 create mode 100644 tests/generic/593.out

diff --git a/tests/generic/593 b/tests/generic/593
new file mode 100755
index 00000000..fd695329
--- /dev/null
+++ b/tests/generic/593
@@ -0,0 +1,69 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Red Hat, Inc.  All Rights Reserved.
+#
+# FS QA Test 593
+#
+# Test per-type(user, group and project) filesystem quota timers, make sure
+# each of grace time can be set/get properly.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_quota
+
+_scratch_mkfs >$seqres.full 2>&1
+_scratch_enable_pquota
+_qmount_option "usrquota,grpquota,prjquota"
+_qmount
+_require_prjquota $SCRATCH_DEV
+
+MIN=60
+
+echo "1. set project quota timer"
+setquota -t -P $((10 * MIN)) $((20 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+echo "2. set group quota timer"
+setquota -t -g $((30 * MIN)) $((40 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+echo "3. set user quota timer"
+setquota -t -u $((50 * MIN)) $((60 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+# cycle mount, make sure the quota timers are still right
+echo "4. cycle mount"
+_qmount
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/593.out b/tests/generic/593.out
new file mode 100644
index 00000000..71dfa224
--- /dev/null
+++ b/tests/generic/593.out
@@ -0,0 +1,32 @@
+QA output created by 593
+1. set project quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+2. set group quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+3. set user quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 00:50; Inode grace time: 01:00
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+4. cycle mount
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 00:50; Inode grace time: 01:00
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
diff --git a/tests/generic/group b/tests/generic/group
index 6fe62505..637ae325 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -595,3 +595,4 @@
 590 auto prealloc preallocrw
 591 auto quick rw pipe splice
 592 auto quick encrypt
+593 auto quick quota
-- 
2.20.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout
  2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
@ 2020-02-16 18:16 ` Zorro Lang
  2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-16 18:16 UTC (permalink / raw)
  To: fstests; +Cc: linux-xfs

Set different block & inode grace timers for user, group and project
quotas, then test softlimit enforcement timeout, make sure different
grace timers as expected.

Signed-off-by: Zorro Lang <zlang@redhat.com>
---

Hi,

This case test passed on ext4, but on XFS (xfs-linux for-next branch with
Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
I got below different output:

# diff -u tests/generic/594.out results/generic/594.out.bad                                            
--- /home/git/xfstests-zlang/tests/generic/594.out      2020-02-16 12:46:33.525450453 -0500
+++ /home/git/xfstests-zlang/results//generic/594.out.bad       2020-02-16 12:49:21.297296515 -0500                                                                                           
@@ -10,6 +10,8 @@
 pwrite: Disk quota exceeded
 --- Test inode quota ---
 Create 2 more files, over the inode softlimit...
+touch: cannot touch 'SCRATCH_MNT/file3': Disk quota exceeded
+touch: cannot touch 'SCRATCH_MNT/file4': Disk quota exceeded
 Try to create one more inode after grace...
 touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
 ### Remove all files
@@ -20,7 +22,7 @@
 Write 225 blocks...
 Rewrite 250 blocks plus 1 byte, over the block softlimit...
 Try to write 1 one more block after grace...
-pwrite: Disk quota exceeded
+pwrite: No space left on device
 --- Test inode quota ---
 Create 2 more files, over the inode softlimit...
 Try to create one more inode after grace...
@@ -33,7 +35,7 @@
 Write 225 blocks...
 Rewrite 250 blocks plus 1 byte, over the block softlimit...
 Try to write 1 one more block after grace...
-pwrite: Disk quota exceeded
+pwrite: No space left on device
 --- Test inode quota ---
 Create 2 more files, over the inode softlimit...
 Try to create one more inode after grace...

That looks weird for me, does anyone know if it's a XFS bug, or how
can I fix this issue for xfs?

Thanks,
Zorro

 common/quota          |   4 +
 tests/generic/594     | 179 ++++++++++++++++++++++++++++++++++++++++++
 tests/generic/594.out |  41 ++++++++++
 tests/generic/group   |   1 +
 4 files changed, 225 insertions(+)
 create mode 100755 tests/generic/594
 create mode 100644 tests/generic/594.out

diff --git a/common/quota b/common/quota
index 4e07fef1..6450df34 100644
--- a/common/quota
+++ b/common/quota
@@ -208,6 +208,10 @@ _qmount()
     if [ "$FSTYP" != "xfs" ]; then
         quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1
         quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1
+        # try to turn on project quota if it's supported
+        if quotaon --help 2>&1 | grep -q '\-\-project'; then
+            quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1
+        fi
     fi
     chmod ugo+rwx $SCRATCH_MNT
 }
diff --git a/tests/generic/594 b/tests/generic/594
new file mode 100755
index 00000000..9a33ab8b
--- /dev/null
+++ b/tests/generic/594
@@ -0,0 +1,179 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Red Hat, Inc.  All Rights Reserved.
+#
+# FS QA Test 594
+#
+# Test per-type(user, group and project) filesystem quota timers, make sure
+# enforcement
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	restore_project
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+require_project()
+{
+	rm -f $tmp.projects $tmp.projid
+	if [ -f /etc/projects ];then
+		cat /etc/projects > $tmp.projects
+	fi
+	if [ -f /etc/projid ];then
+		cat /etc/projid > $tmp.projid
+	fi
+
+	cat >/etc/projects <<EOF
+100:$SCRATCH_MNT/t
+EOF
+	cat >/etc/projid <<EOF
+$qa_user:100
+EOF
+	PROJECT_CHANGED=1
+}
+
+restore_project()
+{
+	if [ "$PROJECT_CHANGED" = "1" ];then
+		rm -f /etc/projects /etc/projid
+		if [ -f $tmp.projects ];then
+			cat $tmp.projects > /etc/projects
+		fi
+		if [ -f $tmp.projid ];then
+			cat $tmp.projid > /etc/projid
+		fi
+	fi
+}
+
+init_files()
+{
+	local dir=$1
+
+	echo "### Initialize files, and their mode and ownership"
+	touch $dir/file{1,2} 2>/dev/null
+	chown $qa_user $dir/file{1,2} 2>/dev/null
+	chgrp $qa_user $dir/file{1,2} 2>/dev/null
+	chmod 777 $dir 2>/dev/null
+}
+
+cleanup_files()
+{
+	echo "### Remove all files"
+	rm -f ${1}/file{1,2,3,4,5,6}
+}
+
+test_grace()
+{
+	local type=$1
+	local dir=$2
+	local bgrace=$3
+	local igrace=$4
+
+	init_files $dir
+	echo "--- Test block quota ---"
+	# Firstly fit below block soft limit
+	echo "Write 225 blocks..."
+	su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \
+		-c fsync $dir/file1" 2>&1 >>$seqres.full | \
+		_filter_xfs_io_error | tee -a $seqres.full
+	repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+	# Secondly overcome block soft limit
+	echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..."
+	su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \
+		-c fsync $dir/file1" 2>&1 >>$seqres.full | \
+		_filter_xfs_io_error | tee -a $seqres.full
+	repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+	# Reset grace time here, make below grace time test more accurate
+	setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+	# Now sleep enough grace time and check that softlimit got enforced
+	sleep $((bgrace + 1))
+	echo "Try to write 1 one more block after grace..."
+	su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \
+		$dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \
+		tee -a $seqres.full
+	repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+	echo "--- Test inode quota ---"
+	# And now the softlimit test for inodes
+	# First reset space limits so that we don't have problems with
+	# space reservations on XFS
+	setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT
+	echo "Create 2 more files, over the inode softlimit..."
+	su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \
+		_filter_scratch | tee -a $seqres.full
+	repquota -v -$type $SCRATCH_MNT  | grep -v "^root" >>$seqres.full 2>&1
+	# Reset grace time here, make below grace time test more accurate
+	setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+	# Wait and check grace time enforcement
+	sleep $((igrace+1))
+	echo "Try to create one more inode after grace..."
+	su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full |
+		_filter_scratch | tee -a $seqres.full
+	repquota -v -$type $SCRATCH_MNT  | grep -v "^root" >>$seqres.full 2>&1
+	cleanup_files $dir
+}
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_quota
+_require_user
+_require_group
+
+_scratch_mkfs >$seqres.full 2>&1
+_scratch_enable_pquota
+_qmount_option "usrquota,grpquota,prjquota"
+_qmount
+_require_prjquota $SCRATCH_DEV
+BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT)
+rm -rf $SCRATCH_MNT/t
+mkdir $SCRATCH_MNT/t
+$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t
+require_project
+
+echo "### Set up different grace timers to each type of quota"
+UBGRACE=12
+UIGRACE=10
+GBGRACE=4
+GIGRACE=2
+PBGRACE=8
+PIGRACE=6
+
+setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+	$((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT
+setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+         $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT
+setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+         $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT
+
+echo; echo "### Test user quota softlimit and grace time"
+test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE
+echo; echo "### Test group quota softlimit and grace time"
+test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE
+echo; echo "### Test project quota softlimit and grace time"
+test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/594.out b/tests/generic/594.out
new file mode 100644
index 00000000..f48948d4
--- /dev/null
+++ b/tests/generic/594.out
@@ -0,0 +1,41 @@
+QA output created by 594
+### Set up different grace timers to each type of quota
+
+### Test user quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test group quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test project quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded
+### Remove all files
diff --git a/tests/generic/group b/tests/generic/group
index 637ae325..fc7ae4cd 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -596,3 +596,4 @@
 591 auto quick rw pipe splice
 592 auto quick encrypt
 593 auto quick quota
+594 auto quick quota
-- 
2.20.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
  2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
@ 2020-02-18 21:09 ` Eric Sandeen
  2020-02-18 21:41 ` Eric Sandeen
  2020-02-20  2:57 ` Eric Sandeen
  3 siblings, 0 replies; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:09 UTC (permalink / raw)
  To: Zorro Lang, fstests; +Cc: linux-xfs

On 2/16/20 12:16 PM, Zorro Lang wrote:
> +echo "1. set project quota timer"
> +setquota -t -P $((10 * MIN)) $((20 * MIN)) $SCRATCH_MNT
> +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
> +echo

FWIW, one thing I notice is that older repquota does not support
the "-P" (project) argument.

Might need to check for that and _notrun, or something.

-Eric

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
  2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
  2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
@ 2020-02-18 21:41 ` Eric Sandeen
  2020-02-18 21:44   ` Eric Sandeen
  2020-02-20  2:57 ` Eric Sandeen
  3 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:41 UTC (permalink / raw)
  To: Zorro Lang, fstests; +Cc: linux-xfs

On 2/16/20 12:16 PM, Zorro Lang wrote:
> Set different grace time, make sure each of quota (user, group and
> project) timers can be set (by setquota) and get (by repquota)
> correctly.
> 
> Signed-off-by: Zorro Lang <zlang@redhat.com>
> ---
> 
> Hi,
> 
> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
> I got below different output:

*sigh* I wish we didn't have so many different quota tools & interfaces.

Behold:

# export MIN=60
# setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch


# ./repquota -g /mnt/scratch
*** Report for group quotas on device /dev/pmem0p2
Block grace time: 00:00; Inode grace time: 00:00
...


# xfs_quota -x -c "state -g"  /mnt/scratch
Group quota state on /mnt/scratch (/dev/pmem0p2)
  Accounting: ON
  Enforcement: ON
  Inode: #132 (1 blocks, 1 extents)
Blocks grace time: [0 days 00:30:00]
Inodes grace time: [0 days 00:40:00]
Realtime Blocks grace time: [--------]

seems like this may actually be a bug in the quota/repquota code, trying to dig through
that now.

repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:

# strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0

but why doesn't this happen for ext4 ...

-Eric

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-18 21:41 ` Eric Sandeen
@ 2020-02-18 21:44   ` Eric Sandeen
  2020-02-18 22:02     ` Eric Sandeen
  0 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:44 UTC (permalink / raw)
  To: Zorro Lang, fstests; +Cc: linux-xfs



On 2/18/20 3:41 PM, Eric Sandeen wrote:
> On 2/16/20 12:16 PM, Zorro Lang wrote:
>> Set different grace time, make sure each of quota (user, group and
>> project) timers can be set (by setquota) and get (by repquota)
>> correctly.
>>
>> Signed-off-by: Zorro Lang <zlang@redhat.com>
>> ---
>>
>> Hi,
>>
>> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
>> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
>> I got below different output:
> 
> *sigh* I wish we didn't have so many different quota tools & interfaces.
> 
> Behold:
> 
> # export MIN=60
> # setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch
> 
> 
> # ./repquota -g /mnt/scratch
> *** Report for group quotas on device /dev/pmem0p2
> Block grace time: 00:00; Inode grace time: 00:00
> ...
> 
> 
> # xfs_quota -x -c "state -g"  /mnt/scratch
> Group quota state on /mnt/scratch (/dev/pmem0p2)
>   Accounting: ON
>   Enforcement: ON
>   Inode: #132 (1 blocks, 1 extents)
> Blocks grace time: [0 days 00:30:00]
> Inodes grace time: [0 days 00:40:00]
> Realtime Blocks grace time: [--------]
> 
> seems like this may actually be a bug in the quota/repquota code, trying to dig through
> that now.
> 
> repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:
> 
> # strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> 
> but why doesn't this happen for ext4 ...

... because on ext4, it makes different quotactl calls... of course :( :

quotactl(Q_GETINFO|GRPQUOTA, "/dev/pmem0p2", 0, {bgrace=1800, igrace=2400, flags=0, valid=IIF_BGRACE|IIF_IGRACE|IIF_FLAGS}) = 0

-Eric

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-18 21:44   ` Eric Sandeen
@ 2020-02-18 22:02     ` Eric Sandeen
  0 siblings, 0 replies; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 22:02 UTC (permalink / raw)
  To: Zorro Lang, fstests; +Cc: linux-xfs

On 2/18/20 3:44 PM, Eric Sandeen wrote:
> 
> 
> On 2/18/20 3:41 PM, Eric Sandeen wrote:
>> On 2/16/20 12:16 PM, Zorro Lang wrote:
>>> Set different grace time, make sure each of quota (user, group and
>>> project) timers can be set (by setquota) and get (by repquota)
>>> correctly.
>>>
>>> Signed-off-by: Zorro Lang <zlang@redhat.com>
>>> ---
>>>
>>> Hi,
>>>
>>> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
>>> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
>>> I got below different output:
>>
>> *sigh* I wish we didn't have so many different quota tools & interfaces.
>>
>> Behold:
>>
>> # export MIN=60
>> # setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch
>>
>>
>> # ./repquota -g /mnt/scratch
>> *** Report for group quotas on device /dev/pmem0p2
>> Block grace time: 00:00; Inode grace time: 00:00
>> ...
>>
>>
>> # xfs_quota -x -c "state -g"  /mnt/scratch
>> Group quota state on /mnt/scratch (/dev/pmem0p2)
>>   Accounting: ON
>>   Enforcement: ON
>>   Inode: #132 (1 blocks, 1 extents)
>> Blocks grace time: [0 days 00:30:00]
>> Inodes grace time: [0 days 00:40:00]
>> Realtime Blocks grace time: [--------]
>>
>> seems like this may actually be a bug in the quota/repquota code, trying to dig through
>> that now.
>>
>> repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:
>>
>> # strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
>> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>>
>> but why doesn't this happen for ext4 ...
> 
> ... because on ext4, it makes different quotactl calls... of course :( :
> 
> quotactl(Q_GETINFO|GRPQUOTA, "/dev/pmem0p2", 0, {bgrace=1800, igrace=2400, flags=0, valid=IIF_BGRACE|IIF_IGRACE|IIF_FLAGS}) = 0

Ok, repquota only ever inits the quota info for this purpose with type 0 (i.e. usrquota)

I guess this fixes it:

diff --git a/quotaio_xfs.c b/quotaio_xfs.c
index 56daf89..b22c7b4 100644
--- a/quotaio_xfs.c
+++ b/quotaio_xfs.c
@@ -81,7 +81,7 @@ static int xfs_init_io(struct quota_handle *h)
        struct xfs_mem_dqinfo info;
        int qcmd;
 
-       qcmd = QCMD(Q_XFS_GETQSTAT, 0);
+       qcmd = QCMD(Q_XFS_GETQSTAT, h->qh_type);
        memset(&info, 0, sizeof(struct xfs_mem_dqinfo));
        if (quotactl(qcmd, h->qh_quotadev, 0, (void *)&info) < 0)
                return -1;

and I need to see what's going on here, but probably this too:

diff --git a/quotaon_xfs.c b/quotaon_xfs.c
index d557a75..d137240 100644
--- a/quotaon_xfs.c
+++ b/quotaon_xfs.c
@@ -32,7 +32,7 @@ static int xfs_state_check(int qcmd, int type, int flags, const char *dev, int r
        if (flags & STATEFLAG_ALL)
                return 0;       /* noop */
 
-       if (quotactl(QCMD(Q_XFS_GETQSTAT, 0), dev, 0, (void *)&info) < 0) {
+       if (quotactl(QCMD(Q_XFS_GETQSTAT, type), dev, 0, (void *)&info) < 0) {
                errstr(_("quotactl() on %s: %s\n"), dev, strerror(errno));
                return -1;
        }


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
                   ` (2 preceding siblings ...)
  2020-02-18 21:41 ` Eric Sandeen
@ 2020-02-20  2:57 ` Eric Sandeen
  2020-02-20  4:15   ` Zorro Lang
  3 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-20  2:57 UTC (permalink / raw)
  To: Zorro Lang, fstests; +Cc: linux-xfs

On 2/16/20 12:16 PM, Zorro Lang wrote:
> --- /dev/null
> +++ b/tests/generic/593.out
> @@ -0,0 +1,32 @@
> +QA output created by 593
> +1. set project quota timer
> +*** Report for user quotas on device SCRATCH_DEV
> +Block grace time: 7days; Inode grace time: 7days
> +*** Report for group quotas on device SCRATCH_DEV
> +Block grace time: 7days; Inode grace time: 7days
> +*** Report for project quotas on device SCRATCH_DEV
> +Block grace time: 00:10; Inode grace time: 00:20

One other thing that might be an issue here, I'm not sure every
filesystem will default to 7 days if no other grace period is set ...?

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
  2020-02-20  2:57 ` Eric Sandeen
@ 2020-02-20  4:15   ` Zorro Lang
       [not found]     ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
  0 siblings, 1 reply; 9+ messages in thread
From: Zorro Lang @ 2020-02-20  4:15 UTC (permalink / raw)
  To: Eric Sandeen; +Cc: fstests, linux-xfs

On Wed, Feb 19, 2020 at 08:57:58PM -0600, Eric Sandeen wrote:
> On 2/16/20 12:16 PM, Zorro Lang wrote:
> > --- /dev/null
> > +++ b/tests/generic/593.out
> > @@ -0,0 +1,32 @@
> > +QA output created by 593
> > +1. set project quota timer
> > +*** Report for user quotas on device SCRATCH_DEV
> > +Block grace time: 7days; Inode grace time: 7days
> > +*** Report for group quotas on device SCRATCH_DEV
> > +Block grace time: 7days; Inode grace time: 7days
> > +*** Report for project quotas on device SCRATCH_DEV
> > +Block grace time: 00:10; Inode grace time: 00:20
> 
> One other thing that might be an issue here, I'm not sure every
> filesystem will default to 7 days if no other grace period is set ...?

Make sense:) I just hope to test the default grace time by pass.
How about:
1) Get the default quota timer $string.
2) Filter above default timer "$string" to "default".
to avoid defferent default timer breaks the golden output.

Thanks,
Zorro

> 


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/2] generic: per-type quota timers set/get test
       [not found]     ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
@ 2020-02-20  5:05       ` Zorro Lang
  0 siblings, 0 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-20  5:05 UTC (permalink / raw)
  To: Eric Sandeen; +Cc: fstests, linux-xfs

On Wed, Feb 19, 2020 at 10:23:29PM -0600, Eric Sandeen wrote:
> 
> 
> On 2/19/20 10:15 PM, Zorro Lang wrote:
> > On Wed, Feb 19, 2020 at 08:57:58PM -0600, Eric Sandeen wrote:
> >> On 2/16/20 12:16 PM, Zorro Lang wrote:
> >>> --- /dev/null
> >>> +++ b/tests/generic/593.out
> >>> @@ -0,0 +1,32 @@
> >>> +QA output created by 593
> >>> +1. set project quota timer
> >>> +*** Report for user quotas on device SCRATCH_DEV
> >>> +Block grace time: 7days; Inode grace time: 7days
> >>> +*** Report for group quotas on device SCRATCH_DEV
> >>> +Block grace time: 7days; Inode grace time: 7days
> >>> +*** Report for project quotas on device SCRATCH_DEV
> >>> +Block grace time: 00:10; Inode grace time: 00:20
> >>
> >> One other thing that might be an issue here, I'm not sure every
> >> filesystem will default to 7 days if no other grace period is set ...?
> > 
> > Make sense:) I just hope to test the default grace time by pass.
> > How about:
> > 1) Get the default quota timer $string.
> > 2) Filter above default timer "$string" to "default".
> > to avoid defferent default timer breaks the golden output.
> 
> Makes sense to me, at least after I fix the other xfs bugs ;)

Yeah, I just reviewed your patch:
  [PATCH] xfs: test that default grace periods init on first mount

I think my case hard to cover this situation, I have to filter the default
value, but if the default value is bad from beginning, it can't help :)

Thanks,
Zorro

> 
> -Eric
> 


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
2020-02-18 21:41 ` Eric Sandeen
2020-02-18 21:44   ` Eric Sandeen
2020-02-18 22:02     ` Eric Sandeen
2020-02-20  2:57 ` Eric Sandeen
2020-02-20  4:15   ` Zorro Lang
     [not found]     ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
2020-02-20  5:05       ` Zorro Lang

FSTests Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/fstests/0 fstests/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 fstests fstests/ https://lore.kernel.org/fstests \
		fstests@vger.kernel.org
	public-inbox-index fstests

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.fstests


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git