* [PATCH 1/2] generic: per-type quota timers set/get test
@ 2020-02-16 18:16 Zorro Lang
2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-16 18:16 UTC (permalink / raw)
To: fstests; +Cc: linux-xfs
Set different grace time, make sure each of quota (user, group and
project) timers can be set (by setquota) and get (by repquota)
correctly.
Signed-off-by: Zorro Lang <zlang@redhat.com>
---
Hi,
This case test passed on ext4, but on XFS (xfs-linux for-next branch with
Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
I got below different output:
# diff -u tests/generic/593.out results/generic/593.out.bad
--- tests/generic/593.out 2020-02-15 12:08:49.012651926 -0500
+++ results//generic/593.out.bad 2020-02-16 13:00:58.811815870 -0500
@@ -5,28 +5,28 @@
*** Report for group quotas on device SCRATCH_DEV
Block grace time: 7days; Inode grace time: 7days
*** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 7days; Inode grace time: 7days
2. set group quota timer
*** Report for user quotas on device SCRATCH_DEV
Block grace time: 7days; Inode grace time: 7days
*** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 7days; Inode grace time: 7days
*** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 7days; Inode grace time: 7days
3. set user quota timer
*** Report for user quotas on device SCRATCH_DEV
Block grace time: 00:50; Inode grace time: 01:00
*** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 00:50; Inode grace time: 01:00
*** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 00:50; Inode grace time: 01:00
4. cycle mount
*** Report for user quotas on device SCRATCH_DEV
Block grace time: 00:50; Inode grace time: 01:00
*** Report for group quotas on device SCRATCH_DEV
-Block grace time: 00:30; Inode grace time: 00:40
+Block grace time: 00:50; Inode grace time: 01:00
*** Report for project quotas on device SCRATCH_DEV
-Block grace time: 00:10; Inode grace time: 00:20
+Block grace time: 00:50; Inode grace time: 01:00
This looks like totally wrong, can anyone help to take a look at it?
Thanks,
Zorro
tests/generic/593 | 69 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/593.out | 32 ++++++++++++++++++++
tests/generic/group | 1 +
3 files changed, 102 insertions(+)
create mode 100755 tests/generic/593
create mode 100644 tests/generic/593.out
diff --git a/tests/generic/593 b/tests/generic/593
new file mode 100755
index 00000000..fd695329
--- /dev/null
+++ b/tests/generic/593
@@ -0,0 +1,69 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
+#
+# FS QA Test 593
+#
+# Test per-type(user, group and project) filesystem quota timers, make sure
+# each of grace time can be set/get properly.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_quota
+
+_scratch_mkfs >$seqres.full 2>&1
+_scratch_enable_pquota
+_qmount_option "usrquota,grpquota,prjquota"
+_qmount
+_require_prjquota $SCRATCH_DEV
+
+MIN=60
+
+echo "1. set project quota timer"
+setquota -t -P $((10 * MIN)) $((20 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+echo "2. set group quota timer"
+setquota -t -g $((30 * MIN)) $((40 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+echo "3. set user quota timer"
+setquota -t -u $((50 * MIN)) $((60 * MIN)) $SCRATCH_MNT
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+echo
+
+# cycle mount, make sure the quota timers are still right
+echo "4. cycle mount"
+_qmount
+repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/593.out b/tests/generic/593.out
new file mode 100644
index 00000000..71dfa224
--- /dev/null
+++ b/tests/generic/593.out
@@ -0,0 +1,32 @@
+QA output created by 593
+1. set project quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+2. set group quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 7days; Inode grace time: 7days
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+3. set user quota timer
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 00:50; Inode grace time: 01:00
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
+
+4. cycle mount
+*** Report for user quotas on device SCRATCH_DEV
+Block grace time: 00:50; Inode grace time: 01:00
+*** Report for group quotas on device SCRATCH_DEV
+Block grace time: 00:30; Inode grace time: 00:40
+*** Report for project quotas on device SCRATCH_DEV
+Block grace time: 00:10; Inode grace time: 00:20
diff --git a/tests/generic/group b/tests/generic/group
index 6fe62505..637ae325 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -595,3 +595,4 @@
590 auto prealloc preallocrw
591 auto quick rw pipe splice
592 auto quick encrypt
+593 auto quick quota
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
@ 2020-02-16 18:16 ` Zorro Lang
2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-16 18:16 UTC (permalink / raw)
To: fstests; +Cc: linux-xfs
Set different block & inode grace timers for user, group and project
quotas, then test softlimit enforcement timeout, make sure different
grace timers as expected.
Signed-off-by: Zorro Lang <zlang@redhat.com>
---
Hi,
This case test passed on ext4, but on XFS (xfs-linux for-next branch with
Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
I got below different output:
# diff -u tests/generic/594.out results/generic/594.out.bad
--- /home/git/xfstests-zlang/tests/generic/594.out 2020-02-16 12:46:33.525450453 -0500
+++ /home/git/xfstests-zlang/results//generic/594.out.bad 2020-02-16 12:49:21.297296515 -0500
@@ -10,6 +10,8 @@
pwrite: Disk quota exceeded
--- Test inode quota ---
Create 2 more files, over the inode softlimit...
+touch: cannot touch 'SCRATCH_MNT/file3': Disk quota exceeded
+touch: cannot touch 'SCRATCH_MNT/file4': Disk quota exceeded
Try to create one more inode after grace...
touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
### Remove all files
@@ -20,7 +22,7 @@
Write 225 blocks...
Rewrite 250 blocks plus 1 byte, over the block softlimit...
Try to write 1 one more block after grace...
-pwrite: Disk quota exceeded
+pwrite: No space left on device
--- Test inode quota ---
Create 2 more files, over the inode softlimit...
Try to create one more inode after grace...
@@ -33,7 +35,7 @@
Write 225 blocks...
Rewrite 250 blocks plus 1 byte, over the block softlimit...
Try to write 1 one more block after grace...
-pwrite: Disk quota exceeded
+pwrite: No space left on device
--- Test inode quota ---
Create 2 more files, over the inode softlimit...
Try to create one more inode after grace...
That looks weird for me, does anyone know if it's a XFS bug, or how
can I fix this issue for xfs?
Thanks,
Zorro
common/quota | 4 +
tests/generic/594 | 179 ++++++++++++++++++++++++++++++++++++++++++
tests/generic/594.out | 41 ++++++++++
tests/generic/group | 1 +
4 files changed, 225 insertions(+)
create mode 100755 tests/generic/594
create mode 100644 tests/generic/594.out
diff --git a/common/quota b/common/quota
index 4e07fef1..6450df34 100644
--- a/common/quota
+++ b/common/quota
@@ -208,6 +208,10 @@ _qmount()
if [ "$FSTYP" != "xfs" ]; then
quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1
quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1
+ # try to turn on project quota if it's supported
+ if quotaon --help 2>&1 | grep -q '\-\-project'; then
+ quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1
+ fi
fi
chmod ugo+rwx $SCRATCH_MNT
}
diff --git a/tests/generic/594 b/tests/generic/594
new file mode 100755
index 00000000..9a33ab8b
--- /dev/null
+++ b/tests/generic/594
@@ -0,0 +1,179 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
+#
+# FS QA Test 594
+#
+# Test per-type(user, group and project) filesystem quota timers, make sure
+# enforcement
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ restore_project
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+require_project()
+{
+ rm -f $tmp.projects $tmp.projid
+ if [ -f /etc/projects ];then
+ cat /etc/projects > $tmp.projects
+ fi
+ if [ -f /etc/projid ];then
+ cat /etc/projid > $tmp.projid
+ fi
+
+ cat >/etc/projects <<EOF
+100:$SCRATCH_MNT/t
+EOF
+ cat >/etc/projid <<EOF
+$qa_user:100
+EOF
+ PROJECT_CHANGED=1
+}
+
+restore_project()
+{
+ if [ "$PROJECT_CHANGED" = "1" ];then
+ rm -f /etc/projects /etc/projid
+ if [ -f $tmp.projects ];then
+ cat $tmp.projects > /etc/projects
+ fi
+ if [ -f $tmp.projid ];then
+ cat $tmp.projid > /etc/projid
+ fi
+ fi
+}
+
+init_files()
+{
+ local dir=$1
+
+ echo "### Initialize files, and their mode and ownership"
+ touch $dir/file{1,2} 2>/dev/null
+ chown $qa_user $dir/file{1,2} 2>/dev/null
+ chgrp $qa_user $dir/file{1,2} 2>/dev/null
+ chmod 777 $dir 2>/dev/null
+}
+
+cleanup_files()
+{
+ echo "### Remove all files"
+ rm -f ${1}/file{1,2,3,4,5,6}
+}
+
+test_grace()
+{
+ local type=$1
+ local dir=$2
+ local bgrace=$3
+ local igrace=$4
+
+ init_files $dir
+ echo "--- Test block quota ---"
+ # Firstly fit below block soft limit
+ echo "Write 225 blocks..."
+ su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \
+ -c fsync $dir/file1" 2>&1 >>$seqres.full | \
+ _filter_xfs_io_error | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Secondly overcome block soft limit
+ echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..."
+ su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \
+ -c fsync $dir/file1" 2>&1 >>$seqres.full | \
+ _filter_xfs_io_error | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Reset grace time here, make below grace time test more accurate
+ setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+ # Now sleep enough grace time and check that softlimit got enforced
+ sleep $((bgrace + 1))
+ echo "Try to write 1 one more block after grace..."
+ su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \
+ $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \
+ tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ echo "--- Test inode quota ---"
+ # And now the softlimit test for inodes
+ # First reset space limits so that we don't have problems with
+ # space reservations on XFS
+ setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT
+ echo "Create 2 more files, over the inode softlimit..."
+ su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \
+ _filter_scratch | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Reset grace time here, make below grace time test more accurate
+ setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+ # Wait and check grace time enforcement
+ sleep $((igrace+1))
+ echo "Try to create one more inode after grace..."
+ su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full |
+ _filter_scratch | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ cleanup_files $dir
+}
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_quota
+_require_user
+_require_group
+
+_scratch_mkfs >$seqres.full 2>&1
+_scratch_enable_pquota
+_qmount_option "usrquota,grpquota,prjquota"
+_qmount
+_require_prjquota $SCRATCH_DEV
+BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT)
+rm -rf $SCRATCH_MNT/t
+mkdir $SCRATCH_MNT/t
+$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t
+require_project
+
+echo "### Set up different grace timers to each type of quota"
+UBGRACE=12
+UIGRACE=10
+GBGRACE=4
+GIGRACE=2
+PBGRACE=8
+PIGRACE=6
+
+setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT
+setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT
+setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT
+
+echo; echo "### Test user quota softlimit and grace time"
+test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE
+echo; echo "### Test group quota softlimit and grace time"
+test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE
+echo; echo "### Test project quota softlimit and grace time"
+test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/594.out b/tests/generic/594.out
new file mode 100644
index 00000000..f48948d4
--- /dev/null
+++ b/tests/generic/594.out
@@ -0,0 +1,41 @@
+QA output created by 594
+### Set up different grace timers to each type of quota
+
+### Test user quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test group quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test project quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded
+### Remove all files
diff --git a/tests/generic/group b/tests/generic/group
index 637ae325..fc7ae4cd 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -596,3 +596,4 @@
591 auto quick rw pipe splice
592 auto quick encrypt
593 auto quick quota
+594 auto quick quota
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
@ 2020-02-18 21:09 ` Eric Sandeen
2020-02-18 21:41 ` Eric Sandeen
2020-02-20 2:57 ` Eric Sandeen
3 siblings, 0 replies; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:09 UTC (permalink / raw)
To: Zorro Lang, fstests; +Cc: linux-xfs
On 2/16/20 12:16 PM, Zorro Lang wrote:
> +echo "1. set project quota timer"
> +setquota -t -P $((10 * MIN)) $((20 * MIN)) $SCRATCH_MNT
> +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | _filter_scratch
> +echo
FWIW, one thing I notice is that older repquota does not support
the "-P" (project) argument.
Might need to check for that and _notrun, or something.
-Eric
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
@ 2020-02-18 21:41 ` Eric Sandeen
2020-02-18 21:44 ` Eric Sandeen
2020-02-20 2:57 ` Eric Sandeen
3 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:41 UTC (permalink / raw)
To: Zorro Lang, fstests; +Cc: linux-xfs
On 2/16/20 12:16 PM, Zorro Lang wrote:
> Set different grace time, make sure each of quota (user, group and
> project) timers can be set (by setquota) and get (by repquota)
> correctly.
>
> Signed-off-by: Zorro Lang <zlang@redhat.com>
> ---
>
> Hi,
>
> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
> I got below different output:
*sigh* I wish we didn't have so many different quota tools & interfaces.
Behold:
# export MIN=60
# setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch
# ./repquota -g /mnt/scratch
*** Report for group quotas on device /dev/pmem0p2
Block grace time: 00:00; Inode grace time: 00:00
...
# xfs_quota -x -c "state -g" /mnt/scratch
Group quota state on /mnt/scratch (/dev/pmem0p2)
Accounting: ON
Enforcement: ON
Inode: #132 (1 blocks, 1 extents)
Blocks grace time: [0 days 00:30:00]
Inodes grace time: [0 days 00:40:00]
Realtime Blocks grace time: [--------]
seems like this may actually be a bug in the quota/repquota code, trying to dig through
that now.
repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:
# strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
but why doesn't this happen for ext4 ...
-Eric
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-18 21:41 ` Eric Sandeen
@ 2020-02-18 21:44 ` Eric Sandeen
2020-02-18 22:02 ` Eric Sandeen
0 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 21:44 UTC (permalink / raw)
To: Zorro Lang, fstests; +Cc: linux-xfs
On 2/18/20 3:41 PM, Eric Sandeen wrote:
> On 2/16/20 12:16 PM, Zorro Lang wrote:
>> Set different grace time, make sure each of quota (user, group and
>> project) timers can be set (by setquota) and get (by repquota)
>> correctly.
>>
>> Signed-off-by: Zorro Lang <zlang@redhat.com>
>> ---
>>
>> Hi,
>>
>> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
>> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
>> I got below different output:
>
> *sigh* I wish we didn't have so many different quota tools & interfaces.
>
> Behold:
>
> # export MIN=60
> # setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch
>
>
> # ./repquota -g /mnt/scratch
> *** Report for group quotas on device /dev/pmem0p2
> Block grace time: 00:00; Inode grace time: 00:00
> ...
>
>
> # xfs_quota -x -c "state -g" /mnt/scratch
> Group quota state on /mnt/scratch (/dev/pmem0p2)
> Accounting: ON
> Enforcement: ON
> Inode: #132 (1 blocks, 1 extents)
> Blocks grace time: [0 days 00:30:00]
> Inodes grace time: [0 days 00:40:00]
> Realtime Blocks grace time: [--------]
>
> seems like this may actually be a bug in the quota/repquota code, trying to dig through
> that now.
>
> repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:
>
> # strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>
> but why doesn't this happen for ext4 ...
... because on ext4, it makes different quotactl calls... of course :( :
quotactl(Q_GETINFO|GRPQUOTA, "/dev/pmem0p2", 0, {bgrace=1800, igrace=2400, flags=0, valid=IIF_BGRACE|IIF_IGRACE|IIF_FLAGS}) = 0
-Eric
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-18 21:44 ` Eric Sandeen
@ 2020-02-18 22:02 ` Eric Sandeen
0 siblings, 0 replies; 9+ messages in thread
From: Eric Sandeen @ 2020-02-18 22:02 UTC (permalink / raw)
To: Zorro Lang, fstests; +Cc: linux-xfs
On 2/18/20 3:44 PM, Eric Sandeen wrote:
>
>
> On 2/18/20 3:41 PM, Eric Sandeen wrote:
>> On 2/16/20 12:16 PM, Zorro Lang wrote:
>>> Set different grace time, make sure each of quota (user, group and
>>> project) timers can be set (by setquota) and get (by repquota)
>>> correctly.
>>>
>>> Signed-off-by: Zorro Lang <zlang@redhat.com>
>>> ---
>>>
>>> Hi,
>>>
>>> This case test passed on ext4, but on XFS (xfs-linux for-next branch with
>>> Eric's patchset: [PATCH 0/4] xfs: enable per-type quota timers and warn limits)
>>> I got below different output:
>>
>> *sigh* I wish we didn't have so many different quota tools & interfaces.
>>
>> Behold:
>>
>> # export MIN=60
>> # setquota -t -g $((30 * MIN)) $((40 * MIN)) /mnt/scratch
>>
>>
>> # ./repquota -g /mnt/scratch
>> *** Report for group quotas on device /dev/pmem0p2
>> Block grace time: 00:00; Inode grace time: 00:00
>> ...
>>
>>
>> # xfs_quota -x -c "state -g" /mnt/scratch
>> Group quota state on /mnt/scratch (/dev/pmem0p2)
>> Accounting: ON
>> Enforcement: ON
>> Inode: #132 (1 blocks, 1 extents)
>> Blocks grace time: [0 days 00:30:00]
>> Inodes grace time: [0 days 00:40:00]
>> Realtime Blocks grace time: [--------]
>>
>> seems like this may actually be a bug in the quota/repquota code, trying to dig through
>> that now.
>>
>> repquota actually calls & gets group quota grace, but perhaps it gets overwritten with the subsequent call for the (empty) user quota:
>>
>> # strace -v -e quotactl ./repquota -g /mnt/scratch 2>&1 | grep "STAT|"
>> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|GRPQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=1800, itimelimit=2400, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|PRJQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>> quotactl(Q_XGETQSTAT|USRQUOTA, "/dev/pmem0p2", 0, {version=1, flags=XFS_QUOTA_UDQ_ACCT|XFS_QUOTA_UDQ_ENFD|XFS_QUOTA_GDQ_ACCT|XFS_QUOTA_GDQ_ENFD, incoredqs=60, u_ino=131, u_nblks=1, u_nextents=1, g_ino=132, g_nblks=1, g_nextents=1, btimelimit=0, itimelimit=0, rtbtimelimit=0, bwarnlimit=0, iwarnlimit=0}) = 0
>>
>> but why doesn't this happen for ext4 ...
>
> ... because on ext4, it makes different quotactl calls... of course :( :
>
> quotactl(Q_GETINFO|GRPQUOTA, "/dev/pmem0p2", 0, {bgrace=1800, igrace=2400, flags=0, valid=IIF_BGRACE|IIF_IGRACE|IIF_FLAGS}) = 0
Ok, repquota only ever inits the quota info for this purpose with type 0 (i.e. usrquota)
I guess this fixes it:
diff --git a/quotaio_xfs.c b/quotaio_xfs.c
index 56daf89..b22c7b4 100644
--- a/quotaio_xfs.c
+++ b/quotaio_xfs.c
@@ -81,7 +81,7 @@ static int xfs_init_io(struct quota_handle *h)
struct xfs_mem_dqinfo info;
int qcmd;
- qcmd = QCMD(Q_XFS_GETQSTAT, 0);
+ qcmd = QCMD(Q_XFS_GETQSTAT, h->qh_type);
memset(&info, 0, sizeof(struct xfs_mem_dqinfo));
if (quotactl(qcmd, h->qh_quotadev, 0, (void *)&info) < 0)
return -1;
and I need to see what's going on here, but probably this too:
diff --git a/quotaon_xfs.c b/quotaon_xfs.c
index d557a75..d137240 100644
--- a/quotaon_xfs.c
+++ b/quotaon_xfs.c
@@ -32,7 +32,7 @@ static int xfs_state_check(int qcmd, int type, int flags, const char *dev, int r
if (flags & STATEFLAG_ALL)
return 0; /* noop */
- if (quotactl(QCMD(Q_XFS_GETQSTAT, 0), dev, 0, (void *)&info) < 0) {
+ if (quotactl(QCMD(Q_XFS_GETQSTAT, type), dev, 0, (void *)&info) < 0) {
errstr(_("quotactl() on %s: %s\n"), dev, strerror(errno));
return -1;
}
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
` (2 preceding siblings ...)
2020-02-18 21:41 ` Eric Sandeen
@ 2020-02-20 2:57 ` Eric Sandeen
2020-02-20 4:15 ` Zorro Lang
3 siblings, 1 reply; 9+ messages in thread
From: Eric Sandeen @ 2020-02-20 2:57 UTC (permalink / raw)
To: Zorro Lang, fstests; +Cc: linux-xfs
On 2/16/20 12:16 PM, Zorro Lang wrote:
> --- /dev/null
> +++ b/tests/generic/593.out
> @@ -0,0 +1,32 @@
> +QA output created by 593
> +1. set project quota timer
> +*** Report for user quotas on device SCRATCH_DEV
> +Block grace time: 7days; Inode grace time: 7days
> +*** Report for group quotas on device SCRATCH_DEV
> +Block grace time: 7days; Inode grace time: 7days
> +*** Report for project quotas on device SCRATCH_DEV
> +Block grace time: 00:10; Inode grace time: 00:20
One other thing that might be an issue here, I'm not sure every
filesystem will default to 7 days if no other grace period is set ...?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
2020-02-20 2:57 ` Eric Sandeen
@ 2020-02-20 4:15 ` Zorro Lang
[not found] ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
0 siblings, 1 reply; 9+ messages in thread
From: Zorro Lang @ 2020-02-20 4:15 UTC (permalink / raw)
To: Eric Sandeen; +Cc: fstests, linux-xfs
On Wed, Feb 19, 2020 at 08:57:58PM -0600, Eric Sandeen wrote:
> On 2/16/20 12:16 PM, Zorro Lang wrote:
> > --- /dev/null
> > +++ b/tests/generic/593.out
> > @@ -0,0 +1,32 @@
> > +QA output created by 593
> > +1. set project quota timer
> > +*** Report for user quotas on device SCRATCH_DEV
> > +Block grace time: 7days; Inode grace time: 7days
> > +*** Report for group quotas on device SCRATCH_DEV
> > +Block grace time: 7days; Inode grace time: 7days
> > +*** Report for project quotas on device SCRATCH_DEV
> > +Block grace time: 00:10; Inode grace time: 00:20
>
> One other thing that might be an issue here, I'm not sure every
> filesystem will default to 7 days if no other grace period is set ...?
Make sense:) I just hope to test the default grace time by pass.
How about:
1) Get the default quota timer $string.
2) Filter above default timer "$string" to "default".
to avoid defferent default timer breaks the golden output.
Thanks,
Zorro
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] generic: per-type quota timers set/get test
[not found] ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
@ 2020-02-20 5:05 ` Zorro Lang
0 siblings, 0 replies; 9+ messages in thread
From: Zorro Lang @ 2020-02-20 5:05 UTC (permalink / raw)
To: Eric Sandeen; +Cc: fstests, linux-xfs
On Wed, Feb 19, 2020 at 10:23:29PM -0600, Eric Sandeen wrote:
>
>
> On 2/19/20 10:15 PM, Zorro Lang wrote:
> > On Wed, Feb 19, 2020 at 08:57:58PM -0600, Eric Sandeen wrote:
> >> On 2/16/20 12:16 PM, Zorro Lang wrote:
> >>> --- /dev/null
> >>> +++ b/tests/generic/593.out
> >>> @@ -0,0 +1,32 @@
> >>> +QA output created by 593
> >>> +1. set project quota timer
> >>> +*** Report for user quotas on device SCRATCH_DEV
> >>> +Block grace time: 7days; Inode grace time: 7days
> >>> +*** Report for group quotas on device SCRATCH_DEV
> >>> +Block grace time: 7days; Inode grace time: 7days
> >>> +*** Report for project quotas on device SCRATCH_DEV
> >>> +Block grace time: 00:10; Inode grace time: 00:20
> >>
> >> One other thing that might be an issue here, I'm not sure every
> >> filesystem will default to 7 days if no other grace period is set ...?
> >
> > Make sense:) I just hope to test the default grace time by pass.
> > How about:
> > 1) Get the default quota timer $string.
> > 2) Filter above default timer "$string" to "default".
> > to avoid defferent default timer breaks the golden output.
>
> Makes sense to me, at least after I fix the other xfs bugs ;)
Yeah, I just reviewed your patch:
[PATCH] xfs: test that default grace periods init on first mount
I think my case hard to cover this situation, I have to filter the default
value, but if the default value is bad from beginning, it can't help :)
Thanks,
Zorro
>
> -Eric
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-02-20 4:55 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-16 18:16 [PATCH 1/2] generic: per-type quota timers set/get test Zorro Lang
2020-02-16 18:16 ` [PATCH 2/2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
2020-02-18 21:09 ` [PATCH 1/2] generic: per-type quota timers set/get test Eric Sandeen
2020-02-18 21:41 ` Eric Sandeen
2020-02-18 21:44 ` Eric Sandeen
2020-02-18 22:02 ` Eric Sandeen
2020-02-20 2:57 ` Eric Sandeen
2020-02-20 4:15 ` Zorro Lang
[not found] ` <605d6c45-9f52-ec84-df01-d5b7665d16dc@sandeen.net>
2020-02-20 5:05 ` Zorro Lang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).