From: David Hildenbrand <david@redhat.com>
To: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Ulrich.Weigand@de.ibm.com, cohuck@redhat.com,
frankja@linux.ibm.com, frankja@linux.vnet.ibm.com,
gor@linux.ibm.com, imbrenda@linux.ibm.com, kvm@vger.kernel.org,
linux-s390@vger.kernel.org, mimu@linux.ibm.com, thuth@redhat.com
Subject: Re: [PATCH v2.1] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling
Date: Tue, 18 Feb 2020 10:56:38 +0100 [thread overview]
Message-ID: <2585441c-5d80-3264-d248-08f04261cb2e@redhat.com> (raw)
In-Reply-To: <20200218083946.44720-1-borntraeger@de.ibm.com>
On 18.02.20 09:39, Christian Borntraeger wrote:
> From: Janosch Frank <frankja@linux.ibm.com>
>
> This contains 3 main changes:
> 1. changes in SIE control block handling for secure guests
> 2. helper functions for create/destroy/unpack secure guests
> 3. KVM_S390_PV_COMMAND ioctl to allow userspace dealing with secure
> machines
>
> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
> [borntraeger@de.ibm.com: patch merging, splitting, fixing]
> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
> ---
> 2->2.1 - combine CREATE/DESTROY CPU/VM into ENABLE DISABLE
> - rework locking and check locks with lockdep
> - I still have the PV_COMMAND_CPU in here for later use in
> the SET_IPL_PSW ioctl. If wanted I can move
> - change CAP number
>
> arch/s390/include/asm/kvm_host.h | 24 ++-
> arch/s390/include/asm/uv.h | 69 ++++++++
> arch/s390/kvm/Makefile | 2 +-
> arch/s390/kvm/kvm-s390.c | 231 ++++++++++++++++++++++++++-
> arch/s390/kvm/kvm-s390.h | 35 +++++
> arch/s390/kvm/pv.c | 262 +++++++++++++++++++++++++++++++
> include/uapi/linux/kvm.h | 35 +++++
> 7 files changed, 654 insertions(+), 4 deletions(-)
> create mode 100644 arch/s390/kvm/pv.c
>
> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
> index d058289385a5..1aa2382fe363 100644
> --- a/arch/s390/include/asm/kvm_host.h
> +++ b/arch/s390/include/asm/kvm_host.h
> @@ -160,7 +160,13 @@ struct kvm_s390_sie_block {
> __u8 reserved08[4]; /* 0x0008 */
> #define PROG_IN_SIE (1<<0)
> __u32 prog0c; /* 0x000c */
> - __u8 reserved10[16]; /* 0x0010 */
> + union {
> + __u8 reserved10[16]; /* 0x0010 */
> + struct {
> + __u64 pv_handle_cpu;
> + __u64 pv_handle_config;
> + };
> + };
> #define PROG_BLOCK_SIE (1<<0)
> #define PROG_REQUEST (1<<1)
> atomic_t prog20; /* 0x0020 */
> @@ -233,7 +239,7 @@ struct kvm_s390_sie_block {
> #define ECB3_RI 0x01
> __u8 ecb3; /* 0x0063 */
> __u32 scaol; /* 0x0064 */
> - __u8 reserved68; /* 0x0068 */
> + __u8 sdf; /* 0x0068 */
> __u8 epdx; /* 0x0069 */
> __u8 reserved6a[2]; /* 0x006a */
> __u32 todpr; /* 0x006c */
> @@ -645,6 +651,11 @@ struct kvm_guestdbg_info_arch {
> unsigned long last_bp;
> };
>
> +struct kvm_s390_pv_vcpu {
> + u64 handle;
> + unsigned long stor_base;
> +};
> +
> struct kvm_vcpu_arch {
> struct kvm_s390_sie_block *sie_block;
> /* if vsie is active, currently executed shadow sie control block */
> @@ -673,6 +684,7 @@ struct kvm_vcpu_arch {
> __u64 cputm_start;
> bool gs_enabled;
> bool skey_enabled;
> + struct kvm_s390_pv_vcpu pv;
> };
>
> struct kvm_vm_stat {
> @@ -843,6 +855,13 @@ struct kvm_s390_gisa_interrupt {
> DECLARE_BITMAP(kicked_mask, KVM_MAX_VCPUS);
> };
>
> +struct kvm_s390_pv {
> + u64 handle;
> + u64 guest_len;
> + unsigned long stor_base;
> + void *stor_var;
> +};
> +
> struct kvm_arch{
> void *sca;
> int use_esca;
> @@ -878,6 +897,7 @@ struct kvm_arch{
> DECLARE_BITMAP(cpu_feat, KVM_S390_VM_CPU_FEAT_NR_BITS);
> DECLARE_BITMAP(idle_mask, KVM_MAX_VCPUS);
> struct kvm_s390_gisa_interrupt gisa_int;
> + struct kvm_s390_pv pv;
> };
>
> #define KVM_HVA_ERR_BAD (-1UL)
> diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h
> index bc452a15ac3f..839cb3a89986 100644
> --- a/arch/s390/include/asm/uv.h
> +++ b/arch/s390/include/asm/uv.h
> @@ -23,11 +23,19 @@
> #define UVC_RC_INV_STATE 0x0003
> #define UVC_RC_INV_LEN 0x0005
> #define UVC_RC_NO_RESUME 0x0007
> +#define UVC_RC_NEED_DESTROY 0x8000
>
> #define UVC_CMD_QUI 0x0001
> #define UVC_CMD_INIT_UV 0x000f
> +#define UVC_CMD_CREATE_SEC_CONF 0x0100
> +#define UVC_CMD_DESTROY_SEC_CONF 0x0101
> +#define UVC_CMD_CREATE_SEC_CPU 0x0120
> +#define UVC_CMD_DESTROY_SEC_CPU 0x0121
> #define UVC_CMD_CONV_TO_SEC_STOR 0x0200
> #define UVC_CMD_CONV_FROM_SEC_STOR 0x0201
> +#define UVC_CMD_SET_SEC_CONF_PARAMS 0x0300
> +#define UVC_CMD_UNPACK_IMG 0x0301
> +#define UVC_CMD_VERIFY_IMG 0x0302
> #define UVC_CMD_PIN_PAGE_SHARED 0x0341
> #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342
> #define UVC_CMD_SET_SHARED_ACCESS 0x1000
> @@ -37,10 +45,17 @@
> enum uv_cmds_inst {
> BIT_UVC_CMD_QUI = 0,
> BIT_UVC_CMD_INIT_UV = 1,
> + BIT_UVC_CMD_CREATE_SEC_CONF = 2,
> + BIT_UVC_CMD_DESTROY_SEC_CONF = 3,
> + BIT_UVC_CMD_CREATE_SEC_CPU = 4,
> + BIT_UVC_CMD_DESTROY_SEC_CPU = 5,
> BIT_UVC_CMD_CONV_TO_SEC_STOR = 6,
> BIT_UVC_CMD_CONV_FROM_SEC_STOR = 7,
> BIT_UVC_CMD_SET_SHARED_ACCESS = 8,
> BIT_UVC_CMD_REMOVE_SHARED_ACCESS = 9,
> + BIT_UVC_CMD_SET_SEC_PARMS = 11,
> + BIT_UVC_CMD_UNPACK_IMG = 13,
> + BIT_UVC_CMD_VERIFY_IMG = 14,
> BIT_UVC_CMD_PIN_PAGE_SHARED = 21,
> BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22,
> };
> @@ -52,6 +67,7 @@ struct uv_cb_header {
> u16 rrc; /* Return Reason Code */
> } __packed __aligned(8);
>
> +/* Query Ultravisor Information */
> struct uv_cb_qui {
> struct uv_cb_header header;
> u64 reserved08;
> @@ -71,6 +87,7 @@ struct uv_cb_qui {
> u64 reserveda0;
> } __packed __aligned(8);
>
> +/* Initialize Ultravisor */
> struct uv_cb_init {
> struct uv_cb_header header;
> u64 reserved08[2];
> @@ -79,6 +96,35 @@ struct uv_cb_init {
> u64 reserved28[4];
> } __packed __aligned(8);
>
> +/* Create Guest Configuration */
> +struct uv_cb_cgc {
> + struct uv_cb_header header;
> + u64 reserved08[2];
> + u64 guest_handle;
> + u64 conf_base_stor_origin;
> + u64 conf_virt_stor_origin;
> + u64 reserved30;
> + u64 guest_stor_origin;
> + u64 guest_stor_len;
> + u64 guest_sca;
> + u64 guest_asce;
> + u64 reserved58[5];
> +} __packed __aligned(8);
> +
> +/* Create Secure CPU */
> +struct uv_cb_csc {
> + struct uv_cb_header header;
> + u64 reserved08[2];
> + u64 cpu_handle;
> + u64 guest_handle;
> + u64 stor_origin;
> + u8 reserved30[6];
> + u16 num;
> + u64 state_origin;
> + u64 reserved40[4];
> +} __packed __aligned(8);
> +
> +/* Convert to Secure */
> struct uv_cb_cts {
> struct uv_cb_header header;
> u64 reserved08[2];
> @@ -86,12 +132,34 @@ struct uv_cb_cts {
> u64 gaddr;
> } __packed __aligned(8);
>
> +/* Convert from Secure / Pin Page Shared */
> struct uv_cb_cfs {
> struct uv_cb_header header;
> u64 reserved08[2];
> u64 paddr;
> } __packed __aligned(8);
>
> +/* Set Secure Config Parameter */
> +struct uv_cb_ssc {
> + struct uv_cb_header header;
> + u64 reserved08[2];
> + u64 guest_handle;
> + u64 sec_header_origin;
> + u32 sec_header_len;
> + u32 reserved2c;
> + u64 reserved30[4];
> +} __packed __aligned(8);
> +
> +/* Unpack */
> +struct uv_cb_unp {
> + struct uv_cb_header header;
> + u64 reserved08[2];
> + u64 guest_handle;
> + u64 gaddr;
> + u64 tweak[2];
> + u64 reserved38[3];
> +} __packed __aligned(8);
> +
> /*
> * A common UV call struct for calls that take no payload
> * Examples:
> @@ -105,6 +173,7 @@ struct uv_cb_nodata {
> u64 reserved20[4];
> } __packed __aligned(8);
>
> +/* Set Shared Access */
> struct uv_cb_share {
> struct uv_cb_header header;
> u64 reserved08[3];
> diff --git a/arch/s390/kvm/Makefile b/arch/s390/kvm/Makefile
> index 05ee90a5ea08..12decca22e7c 100644
> --- a/arch/s390/kvm/Makefile
> +++ b/arch/s390/kvm/Makefile
> @@ -9,6 +9,6 @@ common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o $(KVM)/async_pf.o $(KVM)/irqch
> ccflags-y := -Ivirt/kvm -Iarch/s390/kvm
>
> kvm-objs := $(common-objs) kvm-s390.o intercept.o interrupt.o priv.o sigp.o
> -kvm-objs += diag.o gaccess.o guestdbg.o vsie.o
> +kvm-objs += diag.o gaccess.o guestdbg.o vsie.o pv.o
>
> obj-$(CONFIG_KVM) += kvm.o
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index cc7793525a69..1a7bb08f5c26 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -44,6 +44,7 @@
> #include <asm/cpacf.h>
> #include <asm/timex.h>
> #include <asm/ap.h>
> +#include <asm/uv.h>
> #include "kvm-s390.h"
> #include "gaccess.h"
>
> @@ -234,8 +235,10 @@ int kvm_arch_check_processor_compat(void)
> return 0;
> }
>
> +/* forward declarations */
> static void kvm_gmap_notifier(struct gmap *gmap, unsigned long start,
> unsigned long end);
> +static int sca_switch_to_extended(struct kvm *kvm);
>
> static void kvm_clock_sync_scb(struct kvm_s390_sie_block *scb, u64 delta)
> {
> @@ -571,6 +574,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> case KVM_CAP_S390_BPB:
> r = test_facility(82);
> break;
> + case KVM_CAP_S390_PROTECTED:
> + r = is_prot_virt_host();
> + break;
FWIW, the clean thing to do is to enable the capability only after all
features have been implemented, so as the very last patch.
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2020-02-18 9:56 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 22:26 [PATCH v2 00/42] KVM: s390: Add support for protected VMs Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 01/42] mm:gup/writeback: add callbacks for inaccessible pages Christian Borntraeger
2020-02-17 9:14 ` David Hildenbrand
2020-02-17 11:10 ` Christian Borntraeger
2020-02-18 8:27 ` David Hildenbrand
2020-02-18 15:46 ` Sean Christopherson
2020-02-18 16:02 ` Will Deacon
2020-02-18 16:15 ` Christian Borntraeger
2020-02-18 21:35 ` Sean Christopherson
2020-02-19 8:31 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 02/42] KVM: s390/interrupt: do not pin adapter interrupt pages Christian Borntraeger
2020-02-17 9:43 ` David Hildenbrand
2020-02-20 12:18 ` David Hildenbrand
2020-02-20 13:31 ` Christian Borntraeger
2020-02-20 13:34 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 03/42] s390/protvirt: introduce host side setup Christian Borntraeger
2020-02-17 9:53 ` David Hildenbrand
2020-02-17 11:11 ` Christian Borntraeger
2020-02-17 11:13 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 04/42] s390/protvirt: add ultravisor initialization Christian Borntraeger
2020-02-17 9:57 ` David Hildenbrand
2020-02-17 11:13 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 05/42] s390/mm: provide memory management functions for protected KVM guests Christian Borntraeger
2020-02-17 10:21 ` David Hildenbrand
2020-02-17 11:28 ` Christian Borntraeger
2020-02-17 12:07 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 06/42] s390/mm: add (non)secure page access exceptions handlers Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 07/42] KVM: s390: protvirt: Add UV debug trace Christian Borntraeger
2020-02-17 10:41 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 08/42] KVM: s390: add new variants of UV CALL Christian Borntraeger
2020-02-17 10:42 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 09/42] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling Christian Borntraeger
2020-02-17 10:56 ` David Hildenbrand
2020-02-17 12:04 ` Christian Borntraeger
2020-02-17 12:09 ` David Hildenbrand
2020-02-17 14:53 ` [PATCH 0/2] example changes Christian Borntraeger
2020-02-17 14:53 ` [PATCH 1/2] lock changes Christian Borntraeger
2020-02-17 14:53 ` [PATCH 2/2] merge vm/cpu create Christian Borntraeger
2020-02-17 15:00 ` Janosch Frank
2020-02-17 15:02 ` Christian Borntraeger
2020-02-19 11:02 ` Christian Borntraeger
2020-02-17 19:18 ` [PATCH 0/2] example changes David Hildenbrand
2020-02-18 8:09 ` [PATCH v2 09/42] KVM: s390: protvirt: Add initial vm and cpu lifecycle handling Christian Borntraeger
2020-02-18 8:39 ` [PATCH v2.1] " Christian Borntraeger
2020-02-18 9:12 ` David Hildenbrand
2020-02-18 21:18 ` Christian Borntraeger
2020-02-19 8:32 ` David Hildenbrand
2020-02-19 11:01 ` Christian Borntraeger
2020-02-18 9:56 ` David Hildenbrand [this message]
2020-02-18 20:26 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 10/42] KVM: s390: protvirt: Add KVM api documentation Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 11/42] KVM: s390: protvirt: Secure memory is not mergeable Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 12/42] KVM: s390/mm: Make pages accessible before destroying the guest Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 13/42] KVM: s390: protvirt: Handle SE notification interceptions Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 14/42] KVM: s390: protvirt: Instruction emulation Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 15/42] KVM: s390: protvirt: Add interruption injection controls Christian Borntraeger
2020-02-17 10:59 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 16/42] KVM: s390: protvirt: Implement interruption injection Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 17/42] KVM: s390: protvirt: Add SCLP interrupt handling Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 18/42] KVM: s390: protvirt: Handle spec exception loops Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 19/42] KVM: s390: protvirt: Add new gprs location handling Christian Borntraeger
2020-02-17 11:01 ` David Hildenbrand
2020-02-17 11:33 ` Christian Borntraeger
2020-02-17 14:37 ` Janosch Frank
2020-02-14 22:26 ` [PATCH v2 20/42] KVM: S390: protvirt: Introduce instruction data area bounce buffer Christian Borntraeger
2020-02-17 11:08 ` David Hildenbrand
2020-02-17 14:47 ` Janosch Frank
2020-02-17 15:00 ` Christian Borntraeger
2020-02-17 15:38 ` Janosch Frank
2020-02-17 16:58 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 21/42] KVM: s390: protvirt: handle secure guest prefix pages Christian Borntraeger
2020-02-17 11:11 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 22/42] KVM: s390/mm: handle guest unpin events Christian Borntraeger
2020-02-17 14:23 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 23/42] KVM: s390: protvirt: Write sthyi data to instruction data area Christian Borntraeger
2020-02-17 14:24 ` David Hildenbrand
2020-02-17 18:40 ` Christian Borntraeger
2020-02-17 19:16 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 24/42] KVM: s390: protvirt: STSI handling Christian Borntraeger
2020-02-18 8:35 ` David Hildenbrand
2020-02-18 8:44 ` Christian Borntraeger
2020-02-18 9:08 ` David Hildenbrand
2020-02-18 9:11 ` Christian Borntraeger
2020-02-18 9:13 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 25/42] KVM: s390: protvirt: disallow one_reg Christian Borntraeger
2020-02-18 8:40 ` David Hildenbrand
2020-02-18 8:57 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 26/42] KVM: s390: protvirt: Do only reset registers that are accessible Christian Borntraeger
2020-02-18 8:42 ` David Hildenbrand
2020-02-18 9:20 ` Christian Borntraeger
2020-02-18 9:28 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 27/42] KVM: s390: protvirt: Only sync fmt4 registers Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 28/42] KVM: s390: protvirt: Add program exception injection Christian Borntraeger
2020-02-18 9:33 ` David Hildenbrand
2020-02-18 9:37 ` Christian Borntraeger
2020-02-18 9:39 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 29/42] KVM: s390: protvirt: Add diag 308 subcode 8 - 10 handling Christian Borntraeger
2020-02-18 9:38 ` David Hildenbrand
2020-02-19 12:45 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 30/42] KVM: s390: protvirt: UV calls in support of diag308 0, 1 Christian Borntraeger
2020-02-18 9:44 ` David Hildenbrand
2020-02-19 11:53 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 31/42] KVM: s390: protvirt: Report CPU state to Ultravisor Christian Borntraeger
2020-02-18 9:48 ` David Hildenbrand
2020-02-19 19:36 ` Christian Borntraeger
2020-02-19 19:46 ` Christian Borntraeger
2020-02-20 10:52 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 32/42] KVM: s390: protvirt: Support cmd 5 operation state Christian Borntraeger
2020-02-18 9:50 ` David Hildenbrand
2020-02-19 11:06 ` Christian Borntraeger
2020-02-19 11:08 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 33/42] KVM: s390: protvirt: Mask PSW interrupt bits for interception 104 and 112 Christian Borntraeger
2020-02-18 9:53 ` David Hildenbrand
2020-02-18 10:02 ` David Hildenbrand
2020-02-18 10:05 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 34/42] KVM: s390: protvirt: do not inject interrupts after start Christian Borntraeger
2020-02-18 9:53 ` David Hildenbrand
2020-02-18 10:02 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 35/42] KVM: s390: protvirt: Add UV cpu reset calls Christian Borntraeger
2020-02-18 9:54 ` David Hildenbrand
2020-02-14 22:26 ` [PATCH v2 36/42] DOCUMENTATION: Protected virtual machine introduction and IPL Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 37/42] s390/uv: Fix handling of length extensions (already in s390 tree) Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 38/42] s390: protvirt: Add sysfs firmware interface for Ultravisor information Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 39/42] example for future extension: mm:gup/writeback: add callbacks for inaccessible pages: error cases Christian Borntraeger
2020-02-18 16:25 ` Will Deacon
2020-02-18 16:30 ` Christian Borntraeger
2020-02-18 16:33 ` Will Deacon
2020-02-14 22:26 ` [PATCH v2 40/42] example for future extension: mm:gup/writeback: add callbacks for inaccessible pages: source indication Christian Borntraeger
2020-02-17 14:15 ` Ulrich Weigand
2020-02-17 14:38 ` Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 41/42] potential fixup for "s390/mm: provide memory management functions for protected KVM guests" Christian Borntraeger
2020-02-14 22:26 ` [PATCH v2 42/42] KVM: s390: rstify new ioctls in api.rst Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2585441c-5d80-3264-d248-08f04261cb2e@redhat.com \
--to=david@redhat.com \
--cc=Ulrich.Weigand@de.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=frankja@linux.vnet.ibm.com \
--cc=gor@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mimu@linux.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).