[PATCH] ARM: dts: meson8b: add ethernet fifo sizes

[PATCH] ARM: dts: meson8b: add ethernet fifo sizes

[Jerome Brunet]

If unspecified in DT, the fifo sizes are not automatically detected by
the dwmac1000 dma driver and the reported fifo sizes default to 0.
Because of this, flow control will be turned off on the device.

Add the fifo sizes provided by the datasheet in the SoC in DT so
flow control may be enabled if necessary.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fba2c70c2fda..b044ad78b475 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -410,6 +410,8 @@
 		 <&clkc CLKID_MPLL2>,
 		 <&clkc CLKID_MPLL2>;
 	clock-names = "stmmaceth", "clkin0", "clkin1";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
 
 	resets = <&reset RESET_ETHERNET>;
 	reset-names = "stmmaceth";
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] ARM: dts: meson8b: add ethernet fifo sizes

[Martin Blumenstingl]

On Thu, Jul 18, 2019 at 11:36 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> If unspecified in DT, the fifo sizes are not automatically detected by
> the dwmac1000 dma driver and the reported fifo sizes default to 0.
> Because of this, flow control will be turned off on the device.
>
> Add the fifo sizes provided by the datasheet in the SoC in DT so
> flow control may be enabled if necessary.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

I wonder if this "fixes" some of the performance issues on Odroid-C1
testing this is now on my TODO-list for the weekend

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] ARM: dts: meson8b: add ethernet fifo sizes

[Aymeric]

Le 23/07/2019 à 21:56, Martin Blumenstingl a écrit :
> On Thu, Jul 18, 2019 at 11:36 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>> If unspecified in DT, the fifo sizes are not automatically detected by
>> the dwmac1000 dma driver and the reported fifo sizes default to 0.
>> Because of this, flow control will be turned off on the device.
>>
>> Add the fifo sizes provided by the datasheet in the SoC in DT so
>> flow control may be enabled if necessary.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> I wonder if this "fixes" some of the performance issues on Odroid-C1
> testing this is now on my TODO-list for the weekend


Good! and maybe that will fix the stability issue I'm seeing when using
the board with a 1 gigabit link! (cf
http://lists.infradead.org/pipermail/linux-amlogic/2019-June/012341.html)

I'll try that asap on my board too :)

Thanks.

-- 
Aymeric

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] ARM: dts: meson8b: add ethernet fifo sizes

[Kevin Hilman]

Jerome Brunet <jbrunet@baylibre.com> writes:

> If unspecified in DT, the fifo sizes are not automatically detected by
> the dwmac1000 dma driver and the reported fifo sizes default to 0.
> Because of this, flow control will be turned off on the device.
>
> Add the fifo sizes provided by the datasheet in the SoC in DT so
> flow control may be enabled if necessary.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Queued for v5.4,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic