linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, akpm@linux-foundation.org
Cc: linux-gpio@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org, andriy.shevchenko@linux.intel.com,
	linux@rasmusvillemoes.dk,
	William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [RESEND PATCH v4 8/8] gpio: pcie-idio-24: Utilize for_each_set_clump macro
Date: Tue,  2 Oct 2018 10:16:16 +0900	[thread overview]
Message-ID: <f05ac2b1003db136a425474bfce65a3229b242e0.1538441919.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1538441919.git.vilhelm.gray@gmail.com>

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump macro to simplify code and improve clarity.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-pcie-idio-24.c | 102 +++++++++++--------------------
 1 file changed, 36 insertions(+), 66 deletions(-)

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index f953541e7890..b4d300338a05 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -199,41 +199,21 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
 	size_t i;
-	const unsigned int gpio_reg_size = 8;
-	unsigned int bits_offset;
-	size_t word_index;
-	unsigned int word_offset;
-	unsigned long word_mask;
-	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
-	unsigned long port_state;
+	size_t word;
+	unsigned int offset;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
 		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
 	};
+	const size_t num_ports = ARRAY_SIZE(ports) + 1;
+	unsigned long port_state;
 	const unsigned long out_mode_mask = BIT(1);
 
 	/* clear bits array to a clean slate */
 	bitmap_zero(bits, chip->ngpio);
 
-	/* get bits are evaluated a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* word index for bits array */
-		word_index = BIT_WORD(bits_offset);
-
-		/* gpio offset within current word of bits array */
-		word_offset = bits_offset % BITS_PER_LONG;
-
-		/* mask of get bits for current gpio within current word */
-		word_mask = mask[word_index] & (port_mask << word_offset);
-		if (!word_mask) {
-			/* no get bits in this port so skip to next one */
-			continue;
-		}
-
+	for_each_set_clump(i, word, offset, mask, num_ports, 8) {
 		/* read bits from current gpio port (port 6 is TTL GPIO) */
 		if (i < 6)
 			port_state = ioread8(ports[i]);
@@ -243,7 +223,7 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
 
 		/* store acquired bits at respective bits array offset */
-		bits[word_index] |= port_state << word_offset;
+		bits[word] |= port_state << offset;
 	}
 
 	return 0;
@@ -295,58 +275,48 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
 {
 	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
 	size_t i;
-	unsigned long bits_offset;
-	unsigned long gpio_mask;
-	const unsigned int gpio_reg_size = 8;
-	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
-	unsigned long flags;
-	unsigned int out_state;
+	size_t word;
+	unsigned int offset;
 	void __iomem *ports[] = {
 		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
 		&idio24gpio->reg->out16_23
 	};
+	const size_t num_ports = ARRAY_SIZE(ports) + 1;
+	unsigned int iomask;
+	unsigned int bitmask;
+	unsigned long flags;
 	const unsigned long out_mode_mask = BIT(1);
-	const unsigned int ttl_offset = 48;
-	const size_t ttl_i = BIT_WORD(ttl_offset);
-	const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
-	const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
-	const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
-
-	/* set bits are processed a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports); i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* check if any set bits for current port */
-		gpio_mask = (*mask >> bits_offset) & port_mask;
-		if (!gpio_mask) {
-			/* no set bits for this port so move on to next port */
+	unsigned int out_state;
+
+	for_each_set_clump(i, word, offset, mask, num_ports, 8) {
+		iomask = mask[word] >> offset;
+		bitmask = iomask & (bits[word] >> offset);
+
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (i < 6) {
+			out_state = ioread8(ports[i]) & ~iomask;
+		} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+			out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		} else {
+			/* skip TTL GPIO if set for input */
+			raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 			continue;
 		}
 
-		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+		/* set requested bit states */
+		out_state &= ~iomask;
+		out_state |= bitmask;
 
-		/* process output lines */
-		out_state = ioread8(ports[i]) & ~gpio_mask;
-		out_state |= (*bits >> bits_offset) & gpio_mask;
-		iowrite8(out_state, ports[i]);
+		/* write bits for current gpio port (port 6 is TTL GPIO) */
+		if (i < 6)
+			iowrite8(out_state, ports[i]);
+		else
+			iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
 
 		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 	}
-
-	/* check if setting TTL lines and if they are in output mode */
-	if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
-		return;
-
-	/* handle TTL output */
-	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
-
-	/* process output lines */
-	out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
-	out_state |= ttl_bits;
-	iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
-
-	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 }
 
 static void idio_24_irq_ack(struct irq_data *data)
-- 
2.19.0

  parent reply	other threads:[~2018-10-02  1:16 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-02  1:12 [RESEND PATCH v4 0/8] Introduce the for_each_set_clump macro William Breathitt Gray
2018-10-02  1:12 ` William Breathitt Gray
2018-10-02  1:13 ` [RESEND PATCH v4 1/8] bitops: " William Breathitt Gray
2018-10-02  1:13   ` William Breathitt Gray
2018-10-02  7:42   ` Rasmus Villemoes
2018-10-02  7:42     ` Rasmus Villemoes
2018-10-02  8:21     ` Andy Shevchenko
2018-10-02  8:21       ` Andy Shevchenko
2018-10-03 11:48       ` Andy Shevchenko
2018-10-03 11:48         ` Andy Shevchenko
2018-10-04 10:36         ` William Breathitt Gray
2018-10-04 10:36           ` William Breathitt Gray
2018-10-04 12:10           ` Andy Shevchenko
2018-10-04 12:10             ` Andy Shevchenko
2018-10-04 10:30       ` William Breathitt Gray
2018-10-04 10:30         ` William Breathitt Gray
2018-10-04 10:03     ` William Breathitt Gray
2018-10-04 10:03       ` William Breathitt Gray
2018-10-02  1:14 ` [RESEND PATCH v4 2/8] lib/test_bitmap.c: Add for_each_set_clump test cases William Breathitt Gray
2018-10-02  1:14   ` William Breathitt Gray
2018-10-02  1:14 ` [RESEND PATCH v4 3/8] gpio: 104-dio-48e: Utilize for_each_set_clump macro William Breathitt Gray
2018-10-02  1:14   ` William Breathitt Gray
2018-10-02  7:00   ` Rasmus Villemoes
2018-10-02  7:00     ` Rasmus Villemoes
2018-10-14  4:19     ` William Breathitt Gray
2018-10-14  4:19       ` William Breathitt Gray
2018-10-15 11:59       ` Rasmus Villemoes
2018-10-15 11:59         ` Rasmus Villemoes
2018-10-17  1:54         ` William Breathitt Gray
2018-10-17  1:54           ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 4/8] gpio: 104-idi-48: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 5/8] gpio: gpio-mm: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 6/8] gpio: ws16c48: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:16 ` [RESEND PATCH v4 7/8] gpio: pci-idio-16: " William Breathitt Gray
2018-10-02  1:16   ` William Breathitt Gray
2018-10-02  1:16 ` William Breathitt Gray [this message]
2018-10-02  1:16   ` [RESEND PATCH v4 8/8] gpio: pcie-idio-24: " William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f05ac2b1003db136a425474bfce65a3229b242e0.1538441919.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).