linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, akpm@linux-foundation.org
Cc: linux-gpio@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org, andriy.shevchenko@linux.intel.com,
	linux@rasmusvillemoes.dk,
	William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [RESEND PATCH v4 7/8] gpio: pci-idio-16: Utilize for_each_set_clump macro
Date: Tue,  2 Oct 2018 10:16:00 +0900	[thread overview]
Message-ID: <4ec0716fc3bcad6d0d90598ebd08b753cc354738.1538441919.git.vilhelm.gray@gmail.com> (raw)
Message-ID: <20181002011600.pEjUdnL5_LwJgCK0bJaYJYLnlzcMEEkMEpEsnWtwQXw@z> (raw)
In-Reply-To: <cover.1538441919.git.vilhelm.gray@gmail.com>

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump macro to simplify code and improve clarity.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-pci-idio-16.c | 67 +++++++++++----------------------
 1 file changed, 21 insertions(+), 46 deletions(-)

diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c
index 25d16b2af1c3..6d748c6e59cb 100644
--- a/drivers/gpio/gpio-pci-idio-16.c
+++ b/drivers/gpio/gpio-pci-idio-16.c
@@ -109,44 +109,20 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
 {
 	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
 	size_t i;
-	const unsigned int gpio_reg_size = 8;
-	unsigned int bits_offset;
-	size_t word_index;
-	unsigned int word_offset;
-	unsigned long word_mask;
-	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
-	unsigned long port_state;
+	size_t word;
+	unsigned int offset;
 	void __iomem *ports[] = {
 		&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
 		&idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15,
 	};
+	unsigned long port_state;
 
 	/* clear bits array to a clean slate */
 	bitmap_zero(bits, chip->ngpio);
 
-	/* get bits are evaluated a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports); i++) {
-		/* gpio offset in bits array */
-		bits_offset = i * gpio_reg_size;
-
-		/* word index for bits array */
-		word_index = BIT_WORD(bits_offset);
-
-		/* gpio offset within current word of bits array */
-		word_offset = bits_offset % BITS_PER_LONG;
-
-		/* mask of get bits for current gpio within current word */
-		word_mask = mask[word_index] & (port_mask << word_offset);
-		if (!word_mask) {
-			/* no get bits in this port so skip to next one */
-			continue;
-		}
-
-		/* read bits from current gpio port */
+	for_each_set_clump(i, word, offset, mask, ARRAY_SIZE(ports), 8) {
 		port_state = ioread8(ports[i]);
-
-		/* store acquired bits at respective bits array offset */
-		bits[word_index] |= port_state << word_offset;
+		bits[word] |= port_state << offset;
 	}
 
 	return 0;
@@ -186,30 +162,29 @@ static void idio_16_gpio_set_multiple(struct gpio_chip *chip,
 	unsigned long *mask, unsigned long *bits)
 {
 	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	size_t i;
+	size_t word;
+	unsigned int offset;
+	void __iomem *ports[] = {
+		&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
+	};
+	unsigned int iomask;
+	unsigned int bitmask;
 	unsigned long flags;
 	unsigned int out_state;
 
-	raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+	for_each_set_clump(i, word, offset, mask, ARRAY_SIZE(ports), 8) {
+		iomask = mask[word] >> offset;
+		bitmask = iomask & (bits[word] >> offset);
 
-	/* process output lines 0-7 */
-	if (*mask & 0xFF) {
-		out_state = ioread8(&idio16gpio->reg->out0_7) & ~*mask;
-		out_state |= *mask & *bits;
-		iowrite8(out_state, &idio16gpio->reg->out0_7);
-	}
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
 
-	/* shift to next output line word */
-	*mask >>= 8;
+		out_state = ioread8(ports[i]) & ~iomask;
+		out_state |= bitmask;
+		iowrite8(out_state, ports[i]);
 
-	/* process output lines 8-15 */
-	if (*mask & 0xFF) {
-		*bits >>= 8;
-		out_state = ioread8(&idio16gpio->reg->out8_15) & ~*mask;
-		out_state |= *mask & *bits;
-		iowrite8(out_state, &idio16gpio->reg->out8_15);
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
 	}
-
-	raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
 }
 
 static void idio_16_irq_ack(struct irq_data *data)
-- 
2.19.0

  parent reply	other threads:[~2018-10-02  7:56 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-02  1:12 [RESEND PATCH v4 0/8] Introduce the for_each_set_clump macro William Breathitt Gray
2018-10-02  1:12 ` William Breathitt Gray
2018-10-02  1:13 ` [RESEND PATCH v4 1/8] bitops: " William Breathitt Gray
2018-10-02  1:13   ` William Breathitt Gray
2018-10-02  7:42   ` Rasmus Villemoes
2018-10-02  7:42     ` Rasmus Villemoes
2018-10-02  8:21     ` Andy Shevchenko
2018-10-02  8:21       ` Andy Shevchenko
2018-10-03 11:48       ` Andy Shevchenko
2018-10-03 11:48         ` Andy Shevchenko
2018-10-04 10:36         ` William Breathitt Gray
2018-10-04 10:36           ` William Breathitt Gray
2018-10-04 12:10           ` Andy Shevchenko
2018-10-04 12:10             ` Andy Shevchenko
2018-10-04 10:30       ` William Breathitt Gray
2018-10-04 10:30         ` William Breathitt Gray
2018-10-04 10:03     ` William Breathitt Gray
2018-10-04 10:03       ` William Breathitt Gray
2018-10-02  1:14 ` [RESEND PATCH v4 2/8] lib/test_bitmap.c: Add for_each_set_clump test cases William Breathitt Gray
2018-10-02  1:14   ` William Breathitt Gray
2018-10-02  1:14 ` [RESEND PATCH v4 3/8] gpio: 104-dio-48e: Utilize for_each_set_clump macro William Breathitt Gray
2018-10-02  1:14   ` William Breathitt Gray
2018-10-02  7:00   ` Rasmus Villemoes
2018-10-02  7:00     ` Rasmus Villemoes
2018-10-14  4:19     ` William Breathitt Gray
2018-10-14  4:19       ` William Breathitt Gray
2018-10-15 11:59       ` Rasmus Villemoes
2018-10-15 11:59         ` Rasmus Villemoes
2018-10-17  1:54         ` William Breathitt Gray
2018-10-17  1:54           ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 4/8] gpio: 104-idi-48: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 5/8] gpio: gpio-mm: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:15 ` [RESEND PATCH v4 6/8] gpio: ws16c48: " William Breathitt Gray
2018-10-02  1:15   ` William Breathitt Gray
2018-10-02  1:16 ` William Breathitt Gray [this message]
2018-10-02  1:16   ` [RESEND PATCH v4 7/8] gpio: pci-idio-16: " William Breathitt Gray
2018-10-02  1:16 ` [RESEND PATCH v4 8/8] gpio: pcie-idio-24: " William Breathitt Gray
2018-10-02  1:16   ` William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4ec0716fc3bcad6d0d90598ebd08b753cc354738.1538441919.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).