linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: grant.likely@linaro.org (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/19] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init
Date: Wed, 20 Aug 2014 10:00:28 -0500	[thread overview]
Message-ID: <20140820150029.0BB3FC41205@trevor.secretlab.ca> (raw)
In-Reply-To: <1406206825-15590-7-git-send-email-hanjun.guo@linaro.org>

On Thu, 24 Jul 2014 21:00:12 +0800, Hanjun Guo <hanjun.guo@linaro.org> wrote:
> There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set,
> the former signals to the OS that the hardware is PSCI compliant.
> The latter selects the appropriate conduit for PSCI calls by
> toggling between Hypervisor Calls (HVC) and Secure Monitor Calls
> (SMC).
> 
> FADT table contains such information, parse FADT to get the flags
> for PSCI init. Since ACPI 5.1 doesn't support self defined PSCI
> function IDs, which means that only PSCI 0.2+ is supported in ACPI.
> 
> At the same time, only ACPI 5.1 or higher verison supports PSCI,
> and FADT Major.Minor version was introduced in ACPI 5.1, so we
> will check the version and only parse FADT table with version >= 5.1.
> 
> If firmware provides ACPI tables with ACPI version less than 5.1,
> OS will be messed up with those information and have no way to
> bring up secondery CPUs, so disable ACPI if we get an FADT table
> with version less that 5.1.
> 
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
> ---
>  arch/arm64/include/asm/acpi.h |    2 +
>  arch/arm64/kernel/acpi.c      |   50 ++++++++++++++++++++++
>  arch/arm64/kernel/psci.c      |   95 +++++++++++++++++++++++++++++------------
>  arch/arm64/kernel/setup.c     |    2 +
>  4 files changed, 121 insertions(+), 28 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index 44b617f..67dac90 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -18,6 +18,8 @@ extern int acpi_disabled;
>  extern int acpi_noirq;
>  extern int acpi_pci_disabled;
>  extern int acpi_strict;
> +extern int acpi_psci_present;
> +extern int acpi_psci_use_hvc;
>  
>  static inline void disable_acpi(void)
>  {
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index f5a10b5..374926f 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -11,6 +11,8 @@
>   *  published by the Free Software Foundation.
>   */
>  
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
>  #include <linux/init.h>
>  #include <linux/acpi.h>
>  #include <linux/cpumask.h>
> @@ -34,6 +36,12 @@ EXPORT_SYMBOL(acpi_disabled);
>  int acpi_pci_disabled;		/* skip ACPI PCI scan and IRQ initialization */
>  EXPORT_SYMBOL(acpi_pci_disabled);
>  
> +/* 1 to indicate PSCI is implemented */
> +int acpi_psci_present;
> +
> +/* 1 to indicate HVC must be used instead of SMC as the PSCI conduit */
> +int acpi_psci_use_hvc;
> +
>  /*
>   * __acpi_map_table() will be called before page_init(), so early_ioremap()
>   * or early_memremap() should be called here to for ACPI table mapping.
> @@ -54,6 +62,33 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
>  	early_iounmap(map, size);
>  }
>  
> +static int __init acpi_parse_fadt(struct acpi_table_header *table)
> +{
> +	struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
> +
> +	/*
> +	 * Revision in table header is the FADT Major version,
> +	 * and there is a minor version of FADT which was introduced
> +	 * by ACPI 5.1, we only deal with ACPI 5.1 or higher version
> +	 * to get arm boot flags, or we will disable ACPI.
> +	 */
> +	if (table->revision < 5 || fadt->minor_version < 1) {
> +		pr_info("FADT version is %d.%d, no PSCI support, should be 5.1 or higher\n",
> +			table->revision, fadt->minor_version);
> +		acpi_psci_present = 0;
> +		disable_acpi();
> +		return -EINVAL;
> +	}
> +
> +	if (acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT)
> +		acpi_psci_present = 1;
> +
> +	if (acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC)
> +		acpi_psci_use_hvc = 1;
> +
> +	return 0;
> +}
> +
>  /*
>   * acpi_boot_table_init() called from setup_arch(), always.
>   *	1. find RSDP and get its address, and then find XSDT
> @@ -75,6 +110,21 @@ void __init acpi_boot_table_init(void)
>  	}
>  }
>  
> +int __init acpi_boot_init(void)
> +{
> +	int err = 0;
> +
> +	/* If acpi_disabled, bail out */
> +	if (acpi_disabled)
> +		return -ENODEV;
> +
> +	err = acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
> +	if (err)
> +		pr_err("Can't find FADT\n");
> +
> +	return err;
> +}
> +
>  static int __init parse_acpi(char *arg)
>  {
>  	if (!arg)
> diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
> index 9e9798f..adb25f3 100644
> --- a/arch/arm64/kernel/psci.c
> +++ b/arch/arm64/kernel/psci.c
> @@ -15,6 +15,7 @@
>  
>  #define pr_fmt(fmt) "psci: " fmt
>  
> +#include <linux/acpi.h>
>  #include <linux/init.h>
>  #include <linux/of.h>
>  #include <linux/smp.h>
> @@ -231,6 +232,33 @@ static void psci_sys_poweroff(void)
>  	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
>  }
>  
> +static void psci_0_2_set_functions(void)
> +{
> +	pr_info("Using standard PSCI v0.2 function IDs\n");
> +	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
> +	psci_ops.cpu_suspend = psci_cpu_suspend;
> +
> +	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
> +	psci_ops.cpu_off = psci_cpu_off;
> +
> +	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
> +	psci_ops.cpu_on = psci_cpu_on;
> +
> +	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
> +	psci_ops.migrate = psci_migrate;
> +
> +	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
> +	psci_ops.affinity_info = psci_affinity_info;
> +
> +	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
> +		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
> +	psci_ops.migrate_info_type = psci_migrate_info_type;
> +
> +	arm_pm_restart = psci_sys_reset;
> +
> +	pm_power_off = psci_sys_poweroff;
> +}
> +
>  /*
>   * PSCI Function IDs for v0.2+ are well defined so use
>   * standard values.
> @@ -264,29 +292,7 @@ static int psci_0_2_init(struct device_node *np)
>  		}
>  	}
>  
> -	pr_info("Using standard PSCI v0.2 function IDs\n");
> -	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
> -	psci_ops.cpu_suspend = psci_cpu_suspend;
> -
> -	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
> -	psci_ops.cpu_off = psci_cpu_off;
> -
> -	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
> -	psci_ops.cpu_on = psci_cpu_on;
> -
> -	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
> -	psci_ops.migrate = psci_migrate;
> -
> -	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
> -	psci_ops.affinity_info = psci_affinity_info;
> -
> -	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
> -		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
> -	psci_ops.migrate_info_type = psci_migrate_info_type;
> -
> -	arm_pm_restart = psci_sys_reset;
> -
> -	pm_power_off = psci_sys_poweroff;
> +	psci_0_2_set_functions();
>  
>  out_put_node:
>  	of_node_put(np);
> @@ -333,6 +339,33 @@ out_put_node:
>  	return err;
>  }
>  
> +#ifdef CONFIG_ACPI
> +static int get_set_conduit_method_acpi(void)
> +{
> +	if (acpi_psci_use_hvc)
> +		invoke_psci_fn = __invoke_psci_fn_hvc;
> +	else
> +		invoke_psci_fn = __invoke_psci_fn_smc;
> +
> +	return 0;
> +}
> +
> +/* We use PSCI 0.2+ when ACPI is deployed */
> +static int psci_0_2_init_acpi(void)
> +{
> +	get_set_conduit_method_acpi();
> +
> +	psci_0_2_set_functions();
> +
> +	return 0;
> +}
> +#else
> +static inline int psci_0_2_init_acpi(void)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
>  static const struct of_device_id psci_of_match[] __initconst = {
>  	{ .compatible = "arm,psci",	.data = psci_0_1_init},
>  	{ .compatible = "arm,psci-0.2",	.data = psci_0_2_init},
> @@ -345,13 +378,19 @@ int __init psci_init(void)
>  	const struct of_device_id *matched_np;
>  	psci_initcall_t init_fn;
>  
> -	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
> +	if (acpi_disabled) {
> +		np = of_find_matching_node_and_match(NULL,
> +				psci_of_match, &matched_np);
>  
> -	if (!np)
> -		return -ENODEV;
> +		if (!np)
> +			return -ENODEV;
> +
> +		init_fn = (psci_initcall_t)matched_np->data;
> +
> +		return init_fn(np);
> +	}
>  
> -	init_fn = (psci_initcall_t)matched_np->data;
> -	return init_fn(np);
> +	return psci_0_2_init_acpi();
>  }

So, while the functionality is sound, this is kind of a stinky diff. The
ACPI path should not push the OF code into a sub branch. Make it look
like this instead (with the advantage that the diff will be simpler):

+	if (IS_ENABLED(CONFIG_ACPI) && !acpi_disabled)
+		return psci_0_2_init_acpi();

 	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
 
 	if (!np)
 		return -ENODEV;
 
 	init_fn = (psci_initcall_t)matched_np->data;
 	return init_fn(np);

g.

  parent reply	other threads:[~2014-08-20 15:00 UTC|newest]

Thread overview: 131+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-24 13:00 [PATCH 00/19] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2014-07-24 13:00 ` [PATCH 01/19] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2014-07-28 18:29   ` Sudeep Holla
2014-07-28 22:49     ` Graeme Gregory
2014-07-29  8:49       ` Sudeep Holla
2014-07-29 13:08     ` Hanjun Guo
2014-07-29 13:50       ` Sudeep Holla
2014-07-29 14:07         ` Hanjun Guo
2014-07-28 18:30   ` Sudeep Holla
2014-07-24 13:00 ` [PATCH 02/19] ARM64 / ACPI: Introduce early_param for "acpi" Hanjun Guo
2014-07-28 18:35   ` Sudeep Holla
2014-07-29 13:10     ` Hanjun Guo
2014-07-24 13:00 ` [PATCH 03/19] ARM64 / ACPI: Introduce lowlevel suspend function Hanjun Guo
2014-07-24 15:34   ` Mark Rutland
2014-07-25 10:42     ` Hanjun Guo
2014-07-28 18:28   ` Sudeep Holla
2014-07-29 13:00     ` Hanjun Guo
2014-07-24 13:00 ` [PATCH 04/19] ARM64 / ACPI: Introduce arch_fix_phys_package_id() for cpu topology Hanjun Guo
2014-07-24 14:43   ` Mark Brown
2014-07-25 10:32     ` Hanjun Guo
2014-07-28 18:51   ` Sudeep Holla
2014-08-01  6:35     ` Hanjun Guo
2014-08-01 10:48       ` Sudeep Holla
2014-07-24 13:00 ` [PATCH 05/19] ARM64 / ACPI: Make PCI optional for ACPI on ARM64 Hanjun Guo
2014-07-24 21:57   ` Naresh Bhat
2014-07-29 16:40   ` Sudeep Holla
2014-07-24 13:00 ` [PATCH 06/19] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init Hanjun Guo
2014-07-29 16:40   ` Sudeep Holla
2014-07-31  3:53     ` Hanjun Guo
2014-07-31  4:22   ` Olof Johansson
2014-07-31 10:23     ` Hanjun Guo
2014-08-20 15:02       ` Grant Likely
2014-08-20 15:00   ` Grant Likely [this message]
2014-08-20 15:29     ` Catalin Marinas
2014-08-20 15:43       ` graeme.gregory at linaro.org
2014-07-24 13:00 ` [PATCH 07/19] ARM64 / ACPI: Parse MADT to map logical cpu to MPIDR and get cpu_possible/present_map Hanjun Guo
2014-07-24 23:06   ` Naresh Bhat
2014-07-25 11:11     ` Hanjun Guo
2014-07-30 18:20   ` Sudeep Holla
2014-07-31  8:14     ` Hanjun Guo
2014-08-20 15:14   ` Grant Likely
2014-07-24 13:00 ` [PATCH 08/19] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2014-07-30 18:21   ` Sudeep Holla
2014-07-31  8:15     ` Hanjun Guo
2014-07-24 13:00 ` [PATCH 09/19] ARM64 / ACPI: Move the initialization of cpu_logical_map(0) before acpi_boot_init() Hanjun Guo
2014-07-24 15:21   ` Mark Rutland
2014-07-25 10:39     ` Hanjun Guo
2014-07-25 12:18       ` Mark Rutland
2014-07-24 13:00 ` [PATCH 10/19] ARM64 / ACPI: Get the enable method for SMP initialization in ACPI way Hanjun Guo
2014-07-24 15:47   ` Mark Rutland
2014-07-25 10:51     ` Hanjun Guo
2014-07-25 12:24       ` Mark Rutland
2014-07-29  8:12         ` Hanjun Guo
2014-07-31  6:54   ` Olof Johansson
2014-07-31 10:57     ` Hanjun Guo
2014-08-04  9:56       ` Hanjun Guo
2014-07-31 18:52   ` Geoff Levand
2014-08-01  6:49     ` Hanjun Guo
2014-07-24 13:00 ` [PATCH 11/19] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2014-07-24 13:00 ` [PATCH 12/19] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2014-07-24 13:00 ` [PATCH 13/19] ACPI / table: Add new function to get table entries Hanjun Guo
2014-07-24 13:00 ` [PATCH 14/19] ARM64 / ACPI: Add GICv2 specific ACPI boot support Hanjun Guo
2014-07-24 13:00 ` [PATCH 15/19] ARM64 / ACPI: Parse GTDT to initialize arch timer Hanjun Guo
2014-07-24 13:00 ` [PATCH 16/19] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2014-07-24 13:00 ` [PATCH 17/19] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2014-07-24 13:00 ` [PATCH 18/19] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2014-07-24 13:00 ` [PATCH 19/19] Documentation: ACPI for ARM64 Hanjun Guo
2014-07-24 20:42   ` Randy Dunlap
2014-07-25 10:55     ` Hanjun Guo
     [not found]   ` <CAFoFrHaWWxRPRYM5+bWj0tGnz05SokqwVGejUCUi+U-KChFBdQ@mail.gmail.com>
2014-07-24 21:19     ` Randy Dunlap
2014-07-29 10:07       ` Christoffer Dall
2014-07-27  2:34   ` Olof Johansson
2014-07-28  8:42     ` Graeme Gregory
2014-07-28 16:23       ` Olof Johansson
2014-07-28 17:44         ` Mark Brown
2014-07-28  9:07     ` Arnd Bergmann
2014-07-28  9:23       ` Graeme Gregory
2014-07-28 10:46         ` Arnd Bergmann
2014-07-28 14:20           ` Andre Przywara
2014-07-28 15:23             ` Arnd Bergmann
2014-07-28 16:14               ` Andre Przywara
2014-07-29  9:17                 ` Graeme Gregory
2014-07-29 10:07                   ` Arnd Bergmann
2014-07-28 10:12       ` Mark Rutland
2014-07-28 16:33         ` Olof Johansson
2014-07-28 18:37           ` Mark Rutland
2014-07-28 18:44             ` Olof Johansson
2014-07-28 16:27       ` Olof Johansson
2014-07-28 17:00         ` Mark Rutland
2014-07-28 18:27           ` Olof Johansson
2014-08-12 18:23             ` Catalin Marinas
2014-08-13 23:41               ` Rafael J. Wysocki
2014-08-14  3:21                 ` Hanjun Guo
2014-08-14 10:27                   ` Catalin Marinas
2014-08-14 20:53                     ` Arnd Bergmann
2014-08-15  1:02                       ` Olof Johansson
2014-08-15 19:49                         ` Arnd Bergmann
2014-08-15 23:19                           ` Mark Brown
2014-08-16 12:51                           ` graeme.gregory at linaro.org
2014-08-15  9:09                     ` Hanjun Guo
2014-08-15 10:01                       ` Catalin Marinas
2014-08-18  9:29                         ` Hanjun Guo
2014-08-18 12:49                           ` Mark Rutland
2014-08-20 22:17                           ` Olof Johansson
2014-08-21  4:00                             ` Hanjun Guo
2014-07-29  9:01       ` Hanjun Guo
2014-07-28 10:06     ` Mark Rutland
2014-07-28 16:44       ` Olof Johansson
2014-07-28 17:36         ` Mark Rutland
2014-07-28 18:34           ` Olof Johansson
2014-07-29 10:29         ` Christoffer Dall
2014-07-29 10:41           ` Arnd Bergmann
2014-07-29 10:55           ` Mark Rutland
2014-07-29 11:28             ` Mark Rutland
2014-07-29 12:37               ` Christoffer Dall
2014-07-29 12:52                 ` Arnd Bergmann
2014-07-29 13:08                   ` Mark Rutland
2014-07-29 13:31                     ` Christoffer Dall
2014-07-29 14:04                       ` Mark Rutland
2014-07-29 14:41                       ` Arnd Bergmann
2014-07-29 15:01                         ` Christoffer Dall
2014-07-30  6:47                       ` Hanjun Guo
2014-07-30  7:14                         ` Christoffer Dall
2014-07-30  9:36                           ` Hanjun Guo
2014-07-29 13:33                   ` Christoffer Dall
2014-07-29  7:58     ` Hanjun Guo
2014-07-29 10:30   ` Christoffer Dall
2014-08-15 22:43   ` Len Brown
2014-08-16 12:45     ` Graeme Gregory
2014-08-20 16:42   ` Grant Likely
2014-07-25  0:46 ` [PATCH 00/19] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140820150029.0BB3FC41205@trevor.secretlab.ca \
    --to=grant.likely@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).