From: Robert Foss <robert.foss@linaro.org>
To: Dongchun Zhu <dongchun.zhu@mediatek.com>,
Fabio Estevam <festevam@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Tomasz Figa <tfiga@chromium.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Robert Foss <robert.foss@linaro.org>
Subject: [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings
Date: Tue, 31 Mar 2020 15:33:44 +0200 [thread overview]
Message-ID: <20200331133346.372517-2-robert.foss@linaro.org> (raw)
In-Reply-To: <20200331133346.372517-1-robert.foss@linaro.org>
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
- Changes since v5:
* Add assigned-clocks and assigned-clock-rates
* robher: dt-schema errors
- Changes since v4:
* Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
* Add clock-lanes property to example
* robher: Fix syntax error in devicetree example
- Changes since v3:
* robher: Fix syntax error
* robher: Removed maxItems
* Fixes yaml 'make dt-binding-check' errors
- Changes since v2:
Fixes comments from from Andy, Tomasz, Sakari, Rob.
* Convert text documentation to YAML schema.
- Changes since v1:
Fixes comments from Sakari, Tomasz
* Add clock-frequency and link-frequencies in DT
.../devicetree/bindings/media/i2c/ov8856.yaml | 150 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 151 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000000..beeddfbb8709
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Ben Kao <ben.kao@intel.com>
+ - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+ The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+ image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 4-lane).
+
+properties:
+ compatible:
+ const: ovti,ov8856
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ assigned-clocks:
+ description:
+ Input clock for the sensor.
+
+ assigned-clock-rates:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDOWN which is physically
+ active low.
+
+ port:
+ type: object
+ additionalProperties: false
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ maxItems: 1
+
+ remote-endpoint: true
+
+ required:
+ - clock-lanes
+ - data-lanes
+ - remote-endpoint
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - assigned-clocks
+ - assigned-clock-rates
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov8856: camera@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+
+ reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam>;
+
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+ assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&mt6358_vcama2_reg>;
+ dvdd-supply = <&mt6358_vcamd_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000 180000000>;
+ };
+ };
+ };
+ };
+...
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index a6fbdf354d34..0f99e863978a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12355,6 +12355,7 @@ L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov8856.c
+F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
OMNIVISION OV9650 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@linux.intel.com>
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-31 16:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 13:33 [PATCH v3 0/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 13:33 ` Robert Foss [this message]
2020-03-31 15:12 ` [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings Marco Felsch
2020-04-02 9:57 ` Robert Foss
2020-04-03 19:21 ` Marco Felsch
2020-04-01 8:07 ` Maxime Ripard
2020-04-02 10:10 ` Robert Foss
2020-04-03 23:27 ` Sakari Ailus
2020-04-04 9:34 ` Maxime Ripard
2020-04-06 8:25 ` Robert Foss
2020-04-06 8:35 ` Sakari Ailus
2020-04-07 8:36 ` Maxime Ripard
2020-04-07 11:29 ` Robert Foss
2020-04-07 12:32 ` Maxime Ripard
2020-04-07 15:47 ` Robert Foss
2020-04-07 16:39 ` Sakari Ailus
2020-04-07 16:46 ` Tomasz Figa
2020-04-07 17:20 ` Sakari Ailus
2020-04-08 12:21 ` Maxime Ripard
2020-04-08 12:35 ` Tomasz Figa
2020-04-08 13:43 ` Maxime Ripard
2020-04-08 15:28 ` Sakari Ailus
2020-04-08 15:30 ` Sakari Ailus
2020-04-08 16:34 ` Andy Shevchenko
2020-04-15 10:18 ` Maxime Ripard
2020-04-15 11:10 ` Robert Foss
2020-04-15 16:16 ` Sakari Ailus
2020-04-20 15:02 ` Maxime Ripard
2020-04-09 8:32 ` Robert Foss
2020-04-07 16:20 ` Sakari Ailus
2020-04-04 9:23 ` Maxime Ripard
2020-03-31 13:33 ` [PATCH v3 2/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 14:01 ` Andy Shevchenko
2020-04-06 13:37 ` Robert Foss
2020-04-06 15:06 ` Andy Shevchenko
2020-04-06 15:25 ` Robert Foss
2020-04-03 23:33 ` Sakari Ailus
2020-03-31 13:33 ` [PATCH v3 3/3] media: ov8856: Implement sensor module revision identification Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331133346.372517-2-robert.foss@linaro.org \
--to=robert.foss@linaro.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dongchun.zhu@mediatek.com \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).