[PATCH AUTOSEL 5.4 003/108] net: axienet: Convert DMA error handler to a work queue

[PATCH AUTOSEL 5.4 003/108] net: axienet: Convert DMA error handler to a work queue

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 24201a64770afe2e17050b2ab9e8c0e24e9c23b2 ]

The DMA error handler routine is currently a tasklet, scheduled to run
after the DMA error IRQ was handled.
However it needs to take the MDIO mutex, which is not allowed to do in a
tasklet. A kernel (with debug options) complains consequently:
[  614.050361] net eth0: DMA Tx error 0x174019
[  614.064002] net eth0: Current BD is at: 0x8f84aa0ce
[  614.080195] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
[  614.109484] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 40, name: kworker/u4:4
[  614.135428] 3 locks held by kworker/u4:4/40:
[  614.149075]  #0: ffff000879863328 ((wq_completion)rpciod){....}, at: process_one_work+0x1f0/0x6a8
[  614.177528]  #1: ffff80001251bdf8 ((work_completion)(&task->u.tk_work)){....}, at: process_one_work+0x1f0/0x6a8
[  614.209033]  #2: ffff0008784e0110 (sk_lock-AF_INET-RPC){....}, at: tcp_sendmsg+0x24/0x58
[  614.235429] CPU: 0 PID: 40 Comm: kworker/u4:4 Not tainted 5.6.0-rc3-00926-g4a165a9d5921 #26
[  614.260854] Hardware name: ARM Test FPGA (DT)
[  614.274734] Workqueue: rpciod rpc_async_schedule
[  614.289022] Call trace:
[  614.296871]  dump_backtrace+0x0/0x1a0
[  614.308311]  show_stack+0x14/0x20
[  614.318751]  dump_stack+0xbc/0x100
[  614.329403]  ___might_sleep+0xf0/0x140
[  614.341018]  __might_sleep+0x4c/0x80
[  614.352201]  __mutex_lock+0x5c/0x8a8
[  614.363348]  mutex_lock_nested+0x1c/0x28
[  614.375654]  axienet_dma_err_handler+0x38/0x388
[  614.389999]  tasklet_action_common.isra.15+0x160/0x1a8
[  614.405894]  tasklet_action+0x24/0x30
[  614.417297]  efi_header_end+0xe0/0x494
[  614.429020]  irq_exit+0xd0/0xd8
[  614.439047]  __handle_domain_irq+0x60/0xb0
[  614.451877]  gic_handle_irq+0xdc/0x2d0
[  614.463486]  el1_irq+0xcc/0x180
[  614.473451]  __tcp_transmit_skb+0x41c/0xb58
[  614.486513]  tcp_write_xmit+0x224/0x10a0
[  614.498792]  __tcp_push_pending_frames+0x38/0xc8
[  614.513126]  tcp_rcv_established+0x41c/0x820
[  614.526301]  tcp_v4_do_rcv+0x8c/0x218
[  614.537784]  __release_sock+0x5c/0x108
[  614.549466]  release_sock+0x34/0xa0
[  614.560318]  tcp_sendmsg+0x40/0x58
[  614.571053]  inet_sendmsg+0x40/0x68
[  614.582061]  sock_sendmsg+0x18/0x30
[  614.593074]  xs_sendpages+0x218/0x328
[  614.604506]  xs_tcp_send_request+0xa0/0x1b8
[  614.617461]  xprt_transmit+0xc8/0x4f0
[  614.628943]  call_transmit+0x8c/0xa0
[  614.640028]  __rpc_execute+0xbc/0x6f8
[  614.651380]  rpc_async_schedule+0x28/0x48
[  614.663846]  process_one_work+0x298/0x6a8
[  614.676299]  worker_thread+0x40/0x490
[  614.687687]  kthread+0x134/0x138
[  614.697804]  ret_from_fork+0x10/0x18
[  614.717319] xilinx_axienet 7fe00000.ethernet eth0: Link is Down
[  615.748343] xilinx_axienet 7fe00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off

Since tasklets are not really popular anymore anyway, lets convert this
over to a work queue, which can sleep and thus can take the MDIO mutex.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  2 +-
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 24 +++++++++----------
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 2dacfc85b3baa..04e51af32178c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -435,7 +435,7 @@ struct axienet_local {
 	void __iomem *regs;
 	void __iomem *dma_regs;
 
-	struct tasklet_struct dma_err_tasklet;
+	struct work_struct dma_err_task;
 
 	int tx_irq;
 	int rx_irq;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 479325eeaf8a0..345a795666e92 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -806,7 +806,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
 		/* Write to the Rx channel control register */
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
 
-		tasklet_schedule(&lp->dma_err_tasklet);
+		schedule_work(&lp->dma_err_task);
 		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	}
 out:
@@ -855,7 +855,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
 		/* write to the Rx channel control register */
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
 
-		tasklet_schedule(&lp->dma_err_tasklet);
+		schedule_work(&lp->dma_err_task);
 		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	}
 out:
@@ -891,7 +891,7 @@ static irqreturn_t axienet_eth_irq(int irq, void *_ndev)
 	return IRQ_HANDLED;
 }
 
-static void axienet_dma_err_handler(unsigned long data);
+static void axienet_dma_err_handler(struct work_struct *work);
 
 /**
  * axienet_open - Driver open routine.
@@ -935,9 +935,8 @@ static int axienet_open(struct net_device *ndev)
 
 	phylink_start(lp->phylink);
 
-	/* Enable tasklets for Axi DMA error handling */
-	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
-		     (unsigned long) lp);
+	/* Enable worker thread for Axi DMA error handling */
+	INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler);
 
 	/* Enable interrupts for Axi DMA Tx */
 	ret = request_irq(lp->tx_irq, axienet_tx_irq, IRQF_SHARED,
@@ -966,7 +965,7 @@ static int axienet_open(struct net_device *ndev)
 err_tx_irq:
 	phylink_stop(lp->phylink);
 	phylink_disconnect_phy(lp->phylink);
-	tasklet_kill(&lp->dma_err_tasklet);
+	cancel_work_sync(&lp->dma_err_task);
 	dev_err(lp->dev, "request_irq() failed\n");
 	return ret;
 }
@@ -1025,7 +1024,7 @@ static int axienet_stop(struct net_device *ndev)
 	axienet_mdio_enable(lp);
 	mutex_unlock(&lp->mii_bus->mdio_lock);
 
-	tasklet_kill(&lp->dma_err_tasklet);
+	cancel_work_sync(&lp->dma_err_task);
 
 	if (lp->eth_irq > 0)
 		free_irq(lp->eth_irq, ndev);
@@ -1505,17 +1504,18 @@ static const struct phylink_mac_ops axienet_phylink_ops = {
 };
 
 /**
- * axienet_dma_err_handler - Tasklet handler for Axi DMA Error
- * @data:	Data passed
+ * axienet_dma_err_handler - Work queue task for Axi DMA Error
+ * @work:	pointer to work_struct
  *
  * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the
  * Tx/Rx BDs.
  */
-static void axienet_dma_err_handler(unsigned long data)
+static void axienet_dma_err_handler(struct work_struct *work)
 {
 	u32 axienet_status;
 	u32 cr, i;
-	struct axienet_local *lp = (struct axienet_local *) data;
+	struct axienet_local *lp = container_of(work, struct axienet_local,
+						dma_err_task);
 	struct net_device *ndev = lp->ndev;
 	struct axidma_bd *cur_p;
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 006/108] mmc: sdhci-esdhc-imx: restore pin state when resume back

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit af8fade4bd7bc7bf49851832a20166213e032978 ]

In some low power mode, SoC will lose the pin state, so need to restore
the pin state when resume back.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1582100757-20683-8-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index dccb4df465126..ca1566d4ccab1 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1624,7 +1624,11 @@ static int sdhci_esdhc_suspend(struct device *dev)
 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);
 
-	return sdhci_suspend_host(host);
+	ret = sdhci_suspend_host(host);
+	if (!ret)
+		return pinctrl_pm_select_sleep_state(dev);
+
+	return ret;
 }
 
 static int sdhci_esdhc_resume(struct device *dev)
@@ -1632,6 +1636,10 @@ static int sdhci_esdhc_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	int ret;
 
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
 	/* re-initialize hw state in case it's lost in low power mode */
 	sdhci_esdhc_imx_hwinit(host);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 042/108] drm/sun4i: dsi: Use NULL to signify "no panel"

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 0e4e3fb4901d19f49e5c0a582f383b10dda8d1c5 ]

The continued use of an ERR_PTR to signify "no panel" outside of
sun6i_dsi_attach is confusing because it is a double negative. Because
the connector always reports itself as connected, there is also the
possibility of sending an ERR_PTR to drm_panel_get_modes(), which would
crash.

Solve both of these by only storing the panel pointer if it is valid.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index f83522717488a..d2ade0ad67708 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -748,7 +748,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	phy_configure(dsi->dphy, &opts);
 	phy_power_on(dsi->dphy);
 
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_prepare(dsi->panel);
 
 	/*
@@ -763,7 +763,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	 * ordering on the panels I've tested it with, so I guess this
 	 * will do for now, until that IP is better understood.
 	 */
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_enable(dsi->panel);
 
 	sun6i_dsi_start(dsi, DSI_START_HSC);
@@ -779,7 +779,7 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Disabling DSI output\n");
 
-	if (!IS_ERR(dsi->panel)) {
+	if (dsi->panel) {
 		drm_panel_disable(dsi->panel);
 		drm_panel_unprepare(dsi->panel);
 	}
@@ -941,11 +941,13 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
 			    struct mipi_dsi_device *device)
 {
 	struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
+	struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
 
+	if (IS_ERR(panel))
+		return PTR_ERR(panel);
+
+	dsi->panel = panel;
 	dsi->device = device;
-	dsi->panel = of_drm_find_panel(device->dev.of_node);
-	if (IS_ERR(dsi->panel))
-		return PTR_ERR(dsi->panel);
 
 	dev_info(host->dev, "Attached device %s\n", device->name);
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 043/108] mt76: fix handling full tx queues in mt76_dma_tx_queue_skb_raw

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 93eaec7625f13cffb593b471405b017c7e64d4ee ]

Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 6249a46c19762..026d996612fbe 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -261,10 +261,13 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	struct mt76_queue_buf buf;
 	dma_addr_t addr;
 
+	if (q->queued + 1 >= q->ndesc - 1)
+		goto error;
+
 	addr = dma_map_single(dev->dev, skb->data, skb->len,
 			      DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(dev->dev, addr)))
-		return -ENOMEM;
+		goto error;
 
 	buf.addr = addr;
 	buf.len = skb->len;
@@ -275,6 +278,10 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	spin_unlock_bh(&q->lock);
 
 	return 0;
+
+error:
+	dev_kfree_skb(skb);
+	return -ENOMEM;
 }
 
 static int
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 051/108] drm/stm: ltdc: check crtc state before enabling LIE

[Sasha Levin]

From: Yannick Fertre <yannick.fertre@st.com>

[ Upstream commit a6bd58c51ac43083f3977057a7ad668def55812f ]

Following investigations of a hardware bug, the LIE interrupt
can occur while the display controller is not activated.
LIE interrupt (vblank) don't have to be set if the CRTC is not
enabled.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579601650-7055-1-git-send-email-yannick.fertre@st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/ltdc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 3ab4fbf8eb0d1..2526dfb77401c 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -653,9 +653,14 @@ static const struct drm_crtc_helper_funcs ltdc_crtc_helper_funcs = {
 static int ltdc_crtc_enable_vblank(struct drm_crtc *crtc)
 {
 	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
+	struct drm_crtc_state *state = crtc->state;
 
 	DRM_DEBUG_DRIVER("\n");
-	reg_set(ldev->regs, LTDC_IER, IER_LIE);
+
+	if (state->enable)
+		reg_set(ldev->regs, LTDC_IER, IER_LIE);
+	else
+		return -EPERM;
 
 	return 0;
 }
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 058/108] ASoC: mediatek: mt8183-da7219: pull TDM GPIO pins down when probed

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 8726ee6148fe24e2b29d4a961ad95c4ff8025d1d ]

1. Switch TDM GPIO pins according to playback on or off.
2. Pull TDM GPIO pins down when probed to avoid current leakage.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200213112003.2.I1d568b0c99742c6e755d051aadfd52e4be3cc0a5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 104 +++++++++++++++++-
 1 file changed, 98 insertions(+), 6 deletions(-)

diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index 43f99e59a0786..897a7bc4d3f3f 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -18,6 +18,22 @@
 
 static struct snd_soc_jack headset_jack;
 
+enum PINCTRL_PIN_STATE {
+	PIN_STATE_DEFAULT = 0,
+	PIN_TDM_OUT_ON,
+	PIN_TDM_OUT_OFF,
+	PIN_STATE_MAX
+};
+
+static const char * const mt8183_pin_str[PIN_STATE_MAX] = {
+	"default", "aud_tdm_out_on", "aud_tdm_out_off",
+};
+
+struct mt8183_da7219_max98357_priv {
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pin_states[PIN_STATE_MAX];
+};
+
 static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
@@ -204,6 +220,47 @@ SND_SOC_DAILINK_DEFS(tdm,
 	DAILINK_COMP_ARRAY(COMP_DUMMY()),
 	DAILINK_COMP_ARRAY(COMP_EMPTY()));
 
+static int mt8183_da7219_tdm_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_ON]))
+		return PTR_ERR(priv->pin_states[PIN_TDM_OUT_ON]);
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_ON]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+
+	return ret;
+}
+
+static void mt8183_da7219_tdm_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF]))
+		return;
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_OFF]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+}
+
+static struct snd_soc_ops mt8183_da7219_tdm_ops = {
+	.startup = mt8183_da7219_tdm_startup,
+	.shutdown = mt8183_da7219_tdm_shutdown,
+};
+
 static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 	/* FE */
 	{
@@ -353,6 +410,8 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 		.no_pcm = 1,
 		.dpcm_playback = 1,
 		.ignore_suspend = 1,
+		.be_hw_params_fixup = mt8183_i2s_hw_params_fixup,
+		.ops = &mt8183_da7219_tdm_ops,
 		SND_SOC_DAILINK_REG(tdm),
 	},
 };
@@ -409,7 +468,7 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &mt8183_da7219_max98357_card;
 	struct device_node *platform_node;
 	struct snd_soc_dai_link *dai_link;
-	struct pinctrl *default_pins;
+	struct mt8183_da7219_max98357_priv *priv;
 	int ret, i;
 
 	card->dev = &pdev->dev;
@@ -443,12 +502,45 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	default_pins =
-		devm_pinctrl_get_select(&pdev->dev, PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(default_pins)) {
-		dev_err(&pdev->dev, "%s set pins failed\n",
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+
+	priv->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(priv->pinctrl)) {
+		dev_err(&pdev->dev, "%s devm_pinctrl_get failed\n",
 			__func__);
-		return PTR_ERR(default_pins);
+		return PTR_ERR(priv->pinctrl);
+	}
+
+	for (i = 0; i < PIN_STATE_MAX; i++) {
+		priv->pin_states[i] = pinctrl_lookup_state(priv->pinctrl,
+							   mt8183_pin_str[i]);
+		if (IS_ERR(priv->pin_states[i])) {
+			ret = PTR_ERR(priv->pin_states[i]);
+			dev_info(&pdev->dev, "%s Can't find pin state %s %d\n",
+				 __func__, mt8183_pin_str[i], ret);
+		}
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_TDM_OUT_OFF]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_STATE_DEFAULT])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_STATE_DEFAULT]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
 	}
 
 	return ret;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 060/108] mt76: mt7603: fix input validation issues for powersave-filtered frames

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d55aa5e17461b8b423adae376978032c4a10a1d8 ]

Before extracting the tid out of the packet, check if it was qos-data.
Only accept tid values 0-7
Also, avoid accepting the hardware queue as skb queue mapping, it could
lead to an overrun. Instead, derive the hardware queue from the tid number,
in order to avoid issues with packets being filtered multiple times.
This also fixes a mismatch between hardware and software queue indexes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7603/dma.c   | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
index 24d82a20d046d..86820cf31bb34 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
@@ -30,6 +30,16 @@ mt7603_init_tx_queue(struct mt7603_dev *dev, struct mt76_sw_queue *q,
 static void
 mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 {
+	static const u8 tid_to_ac[8] = {
+		IEEE80211_AC_BE,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BE,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VO,
+		IEEE80211_AC_VO
+	};
 	__le32 *txd = (__le32 *)skb->data;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_sta *sta;
@@ -38,7 +48,7 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 	void *priv;
 	int idx;
 	u32 val;
-	u8 tid;
+	u8 tid = 0;
 
 	if (skb->len < MT_TXD_SIZE + sizeof(struct ieee80211_hdr))
 		goto free;
@@ -56,15 +66,16 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 
 	priv = msta = container_of(wcid, struct mt7603_sta, wcid);
 	val = le32_to_cpu(txd[0]);
-	skb_set_queue_mapping(skb, FIELD_GET(MT_TXD0_Q_IDX, val));
-
 	val &= ~(MT_TXD0_P_IDX | MT_TXD0_Q_IDX);
 	val |= FIELD_PREP(MT_TXD0_Q_IDX, MT_TX_HW_QUEUE_MGMT);
 	txd[0] = cpu_to_le32(val);
 
 	sta = container_of(priv, struct ieee80211_sta, drv_priv);
 	hdr = (struct ieee80211_hdr *)&skb->data[MT_TXD_SIZE];
-	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		tid = *ieee80211_get_qos_ctl(hdr) &
+		      IEEE80211_QOS_CTL_TAG1D_MASK;
+	skb_set_queue_mapping(skb, tid_to_ac[tid]);
 	ieee80211_sta_set_buffered(sta, tid, true);
 
 	spin_lock_bh(&dev->ps_lock);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 076/108] net: axienet: Propagate failure of DMA descriptor setup

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit ee44d0b78839b21591501424fd3cb3648cc803b5 ]

When we fail allocating the DMA buffers in axienet_dma_bd_init(), we
report this error, but carry on with initialisation nevertheless.

This leads to a kernel panic when the driver later wants to send a
packet, as it uses uninitialised data structures.

Make the axienet_device_reset() routine return an error value, as it
contains the DMA buffer initialisation. Make sure we propagate the error
up the chain and eventually fail the driver initialisation, to avoid
relying on non-initialised buffers.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 26 ++++++++++++++-----
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 345a795666e92..bb6e52f3bdf9b 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -437,9 +437,10 @@ static void axienet_setoptions(struct net_device *ndev, u32 options)
 	lp->options |= options;
 }
 
-static void __axienet_device_reset(struct axienet_local *lp)
+static int __axienet_device_reset(struct axienet_local *lp)
 {
 	u32 timeout;
+
 	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
 	 * process of Axi DMA takes a while to complete as all pending
 	 * commands/transfers will be flushed or completed during this
@@ -455,9 +456,11 @@ static void __axienet_device_reset(struct axienet_local *lp)
 		if (--timeout == 0) {
 			netdev_err(lp->ndev, "%s: DMA reset timeout!\n",
 				   __func__);
-			break;
+			return -ETIMEDOUT;
 		}
 	}
+
+	return 0;
 }
 
 /**
@@ -470,13 +473,17 @@ static void __axienet_device_reset(struct axienet_local *lp)
  * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
  * Ethernet core. No separate hardware reset is done for the Axi Ethernet
  * core.
+ * Returns 0 on success or a negative error number otherwise.
  */
-static void axienet_device_reset(struct net_device *ndev)
+static int axienet_device_reset(struct net_device *ndev)
 {
 	u32 axienet_status;
 	struct axienet_local *lp = netdev_priv(ndev);
+	int ret;
 
-	__axienet_device_reset(lp);
+	ret = __axienet_device_reset(lp);
+	if (ret)
+		return ret;
 
 	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
 	lp->options |= XAE_OPTION_VLAN;
@@ -491,9 +498,11 @@ static void axienet_device_reset(struct net_device *ndev)
 			lp->options |= XAE_OPTION_JUMBO;
 	}
 
-	if (axienet_dma_bd_init(ndev)) {
+	ret = axienet_dma_bd_init(ndev);
+	if (ret) {
 		netdev_err(ndev, "%s: descriptor allocation failed\n",
 			   __func__);
+		return ret;
 	}
 
 	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
@@ -518,6 +527,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	axienet_setoptions(ndev, lp->options);
 
 	netif_trans_update(ndev);
+
+	return 0;
 }
 
 /**
@@ -921,8 +932,9 @@ static int axienet_open(struct net_device *ndev)
 	 */
 	mutex_lock(&lp->mii_bus->mdio_lock);
 	axienet_mdio_disable(lp);
-	axienet_device_reset(ndev);
-	ret = axienet_mdio_enable(lp);
+	ret = axienet_device_reset(ndev);
+	if (ret == 0)
+		ret = axienet_mdio_enable(lp);
 	mutex_unlock(&lp->mii_bus->mdio_lock);
 	if (ret < 0)
 		return ret;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 085/108] ASoC: stm32: spdifrx: fix regmap status check

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit a168dae5ea14283e8992d5282237bb0d6a3e1c06 ]

Release resources when exiting on error.

Fixes: 1a5c0b28fc56 ("ASoC: stm32: spdifrx: manage identification registers")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_spdifrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/stm/stm32_spdifrx.c b/sound/soc/stm/stm32_spdifrx.c
index e53fb4bd66b36..9fc2a1767eb1d 100644
--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -995,6 +995,8 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 
 	if (idr == SPDIFRX_IPIDR_NUMBER) {
 		ret = regmap_read(spdifrx->regmap, STM32_SPDIFRX_VERR, &ver);
+		if (ret)
+			goto error;
 
 		dev_dbg(&pdev->dev, "SPDIFRX version: %lu.%lu registered\n",
 			FIELD_GET(SPDIFRX_VERR_MAJ_MASK, ver),
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 090/108] dmaengine: stm32-dma: use reset controller only at probe time

[Sasha Levin]

From: Etienne Carriere <etienne.carriere@st.com>

[ Upstream commit 8cf1e0fc50fcc25021567bb2755580504c57c83a ]

Remove reset controller reference from device instance since it is
used only at probe time.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200129153628.29329-3-amelie.delaunay@st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/stm32-dma.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 5989b08935211..ff34a10fc8d89 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -207,7 +207,6 @@ struct stm32_dma_device {
 	struct dma_device ddev;
 	void __iomem *base;
 	struct clk *clk;
-	struct reset_control *rst;
 	bool mem2mem;
 	struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS];
 };
@@ -1275,6 +1274,7 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	struct dma_device *dd;
 	const struct of_device_id *match;
 	struct resource *res;
+	struct reset_control *rst;
 	int i, ret;
 
 	match = of_match_device(stm32_dma_of_match, &pdev->dev);
@@ -1309,11 +1309,11 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node,
 						"st,mem2mem");
 
-	dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(dmadev->rst)) {
-		reset_control_assert(dmadev->rst);
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(rst)) {
+		reset_control_assert(rst);
 		udelay(2);
-		reset_control_deassert(dmadev->rst);
+		reset_control_deassert(rst);
 	}
 
 	dma_cap_set(DMA_SLAVE, dd->cap_mask);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 094/108] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic

[Sasha Levin]

From: Can Guo <cang@codeaurora.org>

[ Upstream commit c63d6099a7959ecc919b2549dc6b71f53521f819 ]

The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.

Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index d9ea0ae4f374f..5582fbcfd7395 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1539,6 +1539,11 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 		 */
 		if (ufshcd_can_hibern8_during_gating(hba) &&
 		    ufshcd_is_link_hibern8(hba)) {
+			if (async) {
+				rc = -EAGAIN;
+				hba->clk_gating.active_reqs--;
+				break;
+			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
 			flush_work(&hba->clk_gating.ungate_work);
 			spin_lock_irqsave(hba->host->host_lock, flags);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 095/108] ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 408324a3c5383716939eea8096a0f999a0665f7e ]

SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
includes a global timer.

Enable the ARM global timer on these SoCs, which will be used for:
  - the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
    4 ns,
  - delay loops, allowing removal of calls to shmobile_init_delay() from
    the corresponding machine vectors.

Note that when using an old DTB lacking the global timer, the kernel
will still work.  However, loops-per-jiffies will no longer be preset,
and the delay loop will need to be calibrated during boot.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-shmobile/setup-r8a7779.c | 1 -
 arch/arm/mach-shmobile/setup-sh73a0.c  | 1 -
 drivers/soc/renesas/Kconfig            | 2 ++
 3 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b13ec9088ce53..86406e3f9b22e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7779_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index cc08aa7522447..eb4a62fa42895 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_machine	= sh73a0_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 3c5e017bacbac..d6d3093a74b2c 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -116,6 +116,7 @@ config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select SYSC_R8A7779
@@ -163,6 +164,7 @@ config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select RENESAS_INTC_IRQPIN
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 098/108] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit a81bcfb6ac20cdd2e8dec3da14c8bbe1d18f6321 ]

When high load on the DWC3 SuperSpeed port, the controller crashes with:
[  221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[  221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[  221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
[  221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[  221.165946] usb 2-1.1-port1: cannot reset (err = -22)

Setting the parkmode_disable_ss_quirk quirk fixes the issue.

Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
CC: Dongjin Kim <tobetter@gmail.com>
Link: https://lore.kernel.org/r/20200221091532.8142-4-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0ee8a369c5474..e79fef042d974 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2381,6 +2381,7 @@
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
 				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 107/108] rtc: imx-sc: Align imx sc msg structs to 4

[Sasha Levin]

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit a29de86521d8a80cb0b426638d4e38707cafa2e2 ]

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y.

Fix by marking with __aligned(4).

Fixes: a3094fc1a15e ("rtc: imx-sc: add rtc alarm support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lore.kernel.org/r/13404bac8360852d86c61fad5ae5f0c91ffc4cb6.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-imx-sc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-imx-sc.c b/drivers/rtc/rtc-imx-sc.c
index cf2c12107f2b8..a5f59e6f862e0 100644
--- a/drivers/rtc/rtc-imx-sc.c
+++ b/drivers/rtc/rtc-imx-sc.c
@@ -37,7 +37,7 @@ struct imx_sc_msg_timer_rtc_set_alarm {
 	u8 hour;
 	u8 min;
 	u8 sec;
-} __packed;
+} __packed __aligned(4);
 
 static int imx_sc_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 095/108] ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs

[Geert Uytterhoeven]

Hi Sasha,

On Sun, Apr 12, 2020 at 1:11 AM Sasha Levin <sashal@kernel.org> wrote:
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> [ Upstream commit 408324a3c5383716939eea8096a0f999a0665f7e ]
>
> SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
> includes a global timer.
>
> Enable the ARM global timer on these SoCs, which will be used for:
>   - the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
>     4 ns,
>   - delay loops, allowing removal of calls to shmobile_init_delay() from
>     the corresponding machine vectors.
>
> Note that when using an old DTB lacking the global timer, the kernel
> will still work.  However, loops-per-jiffies will no longer be preset,
> and the delay loop will need to be calibrated during boot.

I.e. to avoid this delay, this patch is best backported after backporting
8443ffd1bbd5be74 ("ARM: dts: r8a7779: Add device node for ARM global timer"),
df1a0aac0a533e6f ("ARM: dts: sh73a0: Add device node for ARM global timer").

While the former has been backported to v5.[45]-stable, the latter hasn't,
probably because it depends on
61b58e3f6e518c51 ("ARM: dts: sh73a0: Rename twd clock to periph clock")

So please backport the last two commits first.
Thanks!

> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Link: https://lore.kernel.org/r/20191211135222.26770-5-geert+renesas@glider.be
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 095/108] ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs

[Sasha Levin]

On Sun, Apr 12, 2020 at 10:44:01AM +0200, Geert Uytterhoeven wrote:
>Hi Sasha,
>
>On Sun, Apr 12, 2020 at 1:11 AM Sasha Levin <sashal@kernel.org> wrote:
>> From: Geert Uytterhoeven <geert+renesas@glider.be>
>>
>> [ Upstream commit 408324a3c5383716939eea8096a0f999a0665f7e ]
>>
>> SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
>> includes a global timer.
>>
>> Enable the ARM global timer on these SoCs, which will be used for:
>>   - the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
>>     4 ns,
>>   - delay loops, allowing removal of calls to shmobile_init_delay() from
>>     the corresponding machine vectors.
>>
>> Note that when using an old DTB lacking the global timer, the kernel
>> will still work.  However, loops-per-jiffies will no longer be preset,
>> and the delay loop will need to be calibrated during boot.
>
>I.e. to avoid this delay, this patch is best backported after backporting
>8443ffd1bbd5be74 ("ARM: dts: r8a7779: Add device node for ARM global timer"),
>df1a0aac0a533e6f ("ARM: dts: sh73a0: Add device node for ARM global timer").
>
>While the former has been backported to v5.[45]-stable, the latter hasn't,
>probably because it depends on
>61b58e3f6e518c51 ("ARM: dts: sh73a0: Rename twd clock to periph clock")
>
>So please backport the last two commits first.

Done, thanks!

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel