linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 5/9] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
Date: Sat,  9 Oct 2021 11:26:55 -0500	[thread overview]
Message-ID: <20211009162700.1452857-6-aford173@gmail.com> (raw)
In-Reply-To: <20211009162700.1452857-1-aford173@gmail.com>

This adds the description for the i.MX8MN disp blk-ctrl.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
 drivers/soc/imx/imx8m-blk-ctrl.c | 75 +++++++++++++++++++++++++++++++-
 1 file changed, 74 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index e172d295c441..8d3bf7690383 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 
 #include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
 
 #define BLK_SFT_RSTN	0x0
 #define BLK_CLK_EN	0x4
@@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
 	.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
 };
 
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+				      unsigned long action, void *data)
+{
+	struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+						 power_nb);
+
+	if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+		return NOTIFY_OK;
+
+	/* Enable bus clock and deassert bus reset */
+	regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+	/*
+	 * On power up we have no software backchannel to the GPC to
+	 * wait for the ADB handshake to happen, so we just delay for a
+	 * bit. On power down the GPC driver waits for the handshake.
+	 */
+	if (action == GENPD_NOTIFY_ON)
+		udelay(5);
+
+
+	return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+	[IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+		.name = "dispblk-mipi-dsi",
+		.clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+		.num_clks = 2,
+		.gpc_name = "mipi-dsi",
+		.rst_mask = BIT(0) | BIT(1),
+		.clk_mask = BIT(0) | BIT(1),
+	},
+	[IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+		.name = "dispblk-mipi-csi",
+		.clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+		.num_clks = 2,
+		.gpc_name = "mipi-csi",
+		.rst_mask = BIT(2) | BIT(3),
+		.clk_mask = BIT(2) | BIT(3),
+	},
+	[IMX8MN_DISPBLK_PD_LCDIF] = {
+		.name = "dispblk-lcdif",
+		.clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+		.num_clks = 3,
+		.gpc_name = "lcdif",
+		.rst_mask = BIT(4) | BIT(5),
+		.clk_mask = BIT(4) | BIT(5),
+	},
+	[IMX8MN_DISPBLK_PD_ISI] = {
+		.name = "dispblk-isi",
+		.clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+						"disp_apb_root"},
+		.num_clks = 4,
+		.gpc_name = "isi",
+		.rst_mask = BIT(6) | BIT(7),
+		.clk_mask = BIT(6) | BIT(7),
+	},
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+	.max_reg = 0x84,
+	.power_notifier_fn = imx8mn_disp_power_notifier,
+	.domains = imx8mn_disp_blk_ctl_domain_data,
+	.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
 static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	{
 		.compatible = "fsl,imx8mm-vpu-blk-ctrl",
@@ -505,7 +575,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	}, {
 		.compatible = "fsl,imx8mm-disp-blk-ctrl",
 		.data = &imx8mm_disp_blk_ctl_dev_data
-	} ,{
+	}, {
+		.compatible = "fsl,imx8mn-disp-blk-ctrl",
+		.data = &imx8mn_disp_blk_ctl_dev_data
+	}, {
 		/* Sentinel */
 	}
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-09 16:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 16:26 [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford
2021-10-09 16:26 ` [PATCH V2 1/9] soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled Adam Ford
2021-10-09 16:26 ` [PATCH V2 2/9] soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn Adam Ford
2021-10-09 16:26 ` [PATCH V2 3/9] dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 4/9] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl Adam Ford
2021-10-10 19:31   ` Rob Herring
2021-10-09 16:26 ` Adam Ford [this message]
2021-10-16 21:02   ` [PATCH V2 5/9] soc: imx: imx8m-blk-ctrl: add " Adam Ford
2021-10-09 16:26 ` [PATCH V2 6/9] arm64: dts: imx8mn: add GPC node Adam Ford
2021-10-09 16:26 ` [PATCH V2 7/9] arm64: dts: imx8mn: put USB controller into power-domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 8/9] arm64: dts: imx8mn: add DISP blk-ctrl Adam Ford
2021-10-09 16:26 ` [PATCH V2 9/9] arm64: dts: imx8mn: Enable GPU Adam Ford
2021-10-29 17:22 ` [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211009162700.1452857-6-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).