From: Adam Ford <aford173@gmail.com>
To: arm-soc <linux-arm-kernel@lists.infradead.org>
Cc: Adam Ford-BE <aford@beaconembedded.com>,
Rob Herring <robh+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
devicetree <devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V2 5/9] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
Date: Sat, 16 Oct 2021 16:02:31 -0500 [thread overview]
Message-ID: <CAHCN7x+N2D85=KVxyZM1noG8ovBuasHkVHG3vzXOGzW3wxZFCw@mail.gmail.com> (raw)
In-Reply-To: <20211009162700.1452857-6-aford173@gmail.com>
On Sat, Oct 9, 2021 at 11:27 AM Adam Ford <aford173@gmail.com> wrote:
>
> This adds the description for the i.MX8MN disp blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
Does anyone from NXP have any feedback on this?
I tried to look at the ISI driver and power domain and understand it,
but it's not present in the 8mm, so I went off my best understanding
of the datasheet.
adam
> drivers/soc/imx/imx8m-blk-ctrl.c | 75 +++++++++++++++++++++++++++++++-
> 1 file changed, 74 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index e172d295c441..8d3bf7690383 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -14,6 +14,7 @@
> #include <linux/clk.h>
>
> #include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/power/imx8mn-power.h>
>
> #define BLK_SFT_RSTN 0x0
> #define BLK_CLK_EN 0x4
> @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> };
>
> +
> +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> + power_nb);
> +
> + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> + return NOTIFY_OK;
> +
> + /* Enable bus clock and deassert bus reset */
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> +
> + /*
> + * On power up we have no software backchannel to the GPC to
> + * wait for the ADB handshake to happen, so we just delay for a
> + * bit. On power down the GPC driver waits for the handshake.
> + */
> + if (action == GENPD_NOTIFY_ON)
> + udelay(5);
> +
> +
> + return NOTIFY_OK;
> +}
> +
> +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> + .name = "dispblk-mipi-dsi",
> + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> + .num_clks = 2,
> + .gpc_name = "mipi-dsi",
> + .rst_mask = BIT(0) | BIT(1),
> + .clk_mask = BIT(0) | BIT(1),
> + },
> + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> + .name = "dispblk-mipi-csi",
> + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> + .num_clks = 2,
> + .gpc_name = "mipi-csi",
> + .rst_mask = BIT(2) | BIT(3),
> + .clk_mask = BIT(2) | BIT(3),
> + },
> + [IMX8MN_DISPBLK_PD_LCDIF] = {
> + .name = "dispblk-lcdif",
> + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> + .num_clks = 3,
> + .gpc_name = "lcdif",
> + .rst_mask = BIT(4) | BIT(5),
> + .clk_mask = BIT(4) | BIT(5),
> + },
> + [IMX8MN_DISPBLK_PD_ISI] = {
> + .name = "dispblk-isi",
> + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> + "disp_apb_root"},
> + .num_clks = 4,
> + .gpc_name = "isi",
> + .rst_mask = BIT(6) | BIT(7),
> + .clk_mask = BIT(6) | BIT(7),
> + },
> +};
> +
> +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> + .max_reg = 0x84,
> + .power_notifier_fn = imx8mn_disp_power_notifier,
> + .domains = imx8mn_disp_blk_ctl_domain_data,
> + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> +};
> +
> static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> {
> .compatible = "fsl,imx8mm-vpu-blk-ctrl",
> @@ -505,7 +575,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> }, {
> .compatible = "fsl,imx8mm-disp-blk-ctrl",
> .data = &imx8mm_disp_blk_ctl_dev_data
> - } ,{
> + }, {
> + .compatible = "fsl,imx8mn-disp-blk-ctrl",
> + .data = &imx8mn_disp_blk_ctl_dev_data
> + }, {
> /* Sentinel */
> }
> };
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-16 21:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-09 16:26 [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford
2021-10-09 16:26 ` [PATCH V2 1/9] soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled Adam Ford
2021-10-09 16:26 ` [PATCH V2 2/9] soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn Adam Ford
2021-10-09 16:26 ` [PATCH V2 3/9] dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 4/9] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl Adam Ford
2021-10-10 19:31 ` Rob Herring
2021-10-09 16:26 ` [PATCH V2 5/9] soc: imx: imx8m-blk-ctrl: add " Adam Ford
2021-10-16 21:02 ` Adam Ford [this message]
2021-10-09 16:26 ` [PATCH V2 6/9] arm64: dts: imx8mn: add GPC node Adam Ford
2021-10-09 16:26 ` [PATCH V2 7/9] arm64: dts: imx8mn: put USB controller into power-domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 8/9] arm64: dts: imx8mn: add DISP blk-ctrl Adam Ford
2021-10-09 16:26 ` [PATCH V2 9/9] arm64: dts: imx8mn: Enable GPU Adam Ford
2021-10-29 17:22 ` [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHCN7x+N2D85=KVxyZM1noG8ovBuasHkVHG3vzXOGzW3wxZFCw@mail.gmail.com' \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).