From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 6/9] arm64: dts: imx8mn: add GPC node
Date: Sat, 9 Oct 2021 11:26:56 -0500 [thread overview]
Message-ID: <20211009162700.1452857-7-aford173@gmail.com> (raw)
In-Reply-To: <20211009162700.1452857-1-aford173@gmail.com>
Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 49 +++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index da6c942fb7f9..f5bafd9db673 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -612,6 +614,53 @@ src: reset-controller@30390000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mn-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_hsiomix: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MN_CLK_USB_BUS>;
+ };
+
+ pgc_otg1: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+ power-domains = <&pgc_hsiomix>;
+ };
+
+ pgc_gpumix: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_AHB>;
+ resets = <&src IMX8MQ_RESET_GPU_RESET>;
+ };
+
+ pgc_dispmix: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+ clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+ };
+
+ pgc_mipi: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+ power-domains = <&pgc_dispmix>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-09 16:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-09 16:26 [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford
2021-10-09 16:26 ` [PATCH V2 1/9] soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled Adam Ford
2021-10-09 16:26 ` [PATCH V2 2/9] soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn Adam Ford
2021-10-09 16:26 ` [PATCH V2 3/9] dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 4/9] dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl Adam Ford
2021-10-10 19:31 ` Rob Herring
2021-10-09 16:26 ` [PATCH V2 5/9] soc: imx: imx8m-blk-ctrl: add " Adam Ford
2021-10-16 21:02 ` Adam Ford
2021-10-09 16:26 ` Adam Ford [this message]
2021-10-09 16:26 ` [PATCH V2 7/9] arm64: dts: imx8mn: put USB controller into power-domains Adam Ford
2021-10-09 16:26 ` [PATCH V2 8/9] arm64: dts: imx8mn: add DISP blk-ctrl Adam Ford
2021-10-09 16:26 ` [PATCH V2 9/9] arm64: dts: imx8mn: Enable GPU Adam Ford
2021-10-29 17:22 ` [PATCH V2 0/9] arm64: imx8mn: Enable additional power domains and peripherals Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211009162700.1452857-7-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).