linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode
Date: Wed, 12 Jan 2022 16:18:08 +0100	[thread overview]
Message-ID: <20220112151814.24361-6-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>

If x1/x4 mode is not set correctly then link with endpoint card is not
established.

Use DTS property 'num-lanes' to deteriminate x1/x4 mode.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index a075ba26cff1..0f2ec0a17874 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -93,6 +93,7 @@ struct mvebu_pcie_port {
 	void __iomem *base;
 	u32 port;
 	u32 lane;
+	bool is_x4;
 	int devfn;
 	unsigned int mem_target;
 	unsigned int mem_attr;
@@ -233,13 +234,25 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u32 ctrl, cmd, dev_rev, mask;
+	u32 ctrl, lnkcap, cmd, dev_rev, mask;
 
 	/* Setup PCIe controller to Root Complex mode. */
 	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
 	ctrl |= PCIE_CTRL_RC_MODE;
 	mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
 
+	/*
+	 * Set Maximum Link Width to X1 or X4 in Root Port's PCIe Link
+	 * Capability register. This register is defined by PCIe specification
+	 * as read-only but this mvebu controller has it as read-write and must
+	 * be set to number of SerDes PCIe lanes (1 or 4). If this register is
+	 * not set correctly then link with endpoint card is not established.
+	 */
+	lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
+	lnkcap |= (port->is_x4 ? 4 : 1) << 4;
+	mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+
 	/* Disable Root Bridge I/O space, memory space and bus mastering. */
 	cmd = mvebu_readl(port, PCIE_CMD_OFF);
 	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
@@ -986,6 +999,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	struct device *dev = &pcie->pdev->dev;
 	enum of_gpio_flags flags;
 	int reset_gpio, ret;
+	u32 num_lanes;
 
 	port->pcie = pcie;
 
@@ -998,6 +1012,9 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
 		port->lane = 0;
 
+	if (!of_property_read_u32(child, "num-lanes", &num_lanes) && num_lanes == 4)
+		port->is_x4 = true;
+
 	port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
 				    port->lane);
 	if (!port->name) {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-01-12 15:22 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 15:02 [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-05 15:02 ` [PATCH 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-05 15:02 ` [PATCH 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-05 15:02 ` [PATCH 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-05 15:02 ` [PATCH 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12  1:29   ` Rob Herring
2022-01-05 15:02 ` [PATCH 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-05 15:02 ` [PATCH 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-05 15:02 ` [PATCH 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-05 15:02 ` [PATCH 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-05 15:41   ` Rob Herring
2022-01-05 15:49     ` Pali Rohár
2022-01-12  1:43     ` Pali Rohár
2022-01-12 14:53       ` Rob Herring
2022-01-05 15:02 ` [PATCH 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12  1:30   ` Rob Herring
2022-01-05 15:02 ` [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-06 15:28   ` Marc Zyngier
2022-01-06 15:44     ` Pali Rohár
2022-01-06 15:55       ` Marc Zyngier
2022-01-06 16:20         ` Pali Rohár
2022-01-06 16:27           ` Marc Zyngier
2022-01-06 17:20             ` Marek Behún
2022-01-06 17:31               ` Marc Zyngier
2022-01-07 11:50                 ` Pali Rohár
2022-01-07 18:53                   ` Marc Zyngier
2022-01-05 15:02 ` [PATCH 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-12 15:18 ` [PATCH v2 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-12 15:18   ` [PATCH v2 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-12 15:18   ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-12 15:18   ` [PATCH v2 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-12 15:18   ` [PATCH v2 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 15:18   ` Pali Rohár [this message]
2022-01-20 17:09     ` [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode Rob Herring
2022-01-20 17:19       ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-12 15:18   ` [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-12 15:18   ` [PATCH v2 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-20 16:49     ` Rob Herring
2022-01-20 16:55       ` Pali Rohár
2022-01-20 18:40         ` Rob Herring
2022-01-12 15:18   ` [PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 15:36     ` Marek Behún
2022-01-12 15:18   ` [PATCH v2 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-02-11 17:19     ` Lorenzo Pieralisi
2022-02-11 17:52       ` Pali Rohár
2022-02-11 18:21         ` Lorenzo Pieralisi
2022-02-12 10:59           ` Marc Zyngier
2022-02-16 23:40         ` Pali Rohár
2022-02-22 10:21           ` Lorenzo Pieralisi
2022-02-22 10:51             ` Pali Rohár
2022-02-22 15:24               ` Lorenzo Pieralisi
2022-02-22 15:42                 ` Pali Rohár
2022-02-22 15:45                   ` Lorenzo Pieralisi
2022-02-22 15:55                     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-02-14 15:07     ` Gregory CLEMENT
2022-02-14 15:09       ` Pali Rohár
2022-02-14 15:26         ` Gregory CLEMENT
     [not found]           ` <CAEzXK1qYKVk7QiSY_DwqkZ7WV6WU06WBtiqZx0JJCc+mOP-7Kg@mail.gmail.com>
2022-02-15 10:48             ` Luís Mendes
2022-02-15 10:52               ` Pali Rohár
2022-02-18 21:53                 ` Luís Mendes
2022-02-19 13:36                   ` Pali Rohár
2022-02-11 17:50 ` [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Lorenzo Pieralisi
2022-02-11 18:01   ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220112151814.24361-6-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).