linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: "Pali Rohár" <pali@kernel.org>
Cc: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts
Date: Thu, 06 Jan 2022 15:55:11 +0000	[thread overview]
Message-ID: <878rvsvoyo.wl-maz@kernel.org> (raw)
In-Reply-To: <20220106154447.aie6taiuvav5wu6y@pali>

On Thu, 06 Jan 2022 15:44:47 +0000,
Pali Rohár <pali@kernel.org> wrote:
> 
> On Thursday 06 January 2022 15:28:20 Marc Zyngier wrote:
> > On Wed, 05 Jan 2022 15:02:38 +0000,
> > Pali Rohár <pali@kernel.org> wrote:
> > > 
> > > This adds support for legacy INTx interrupts received from other PCIe
> > > devices and which are reported by a new INTx irq chip.
> > > 
> > > With this change, kernel can distinguish between INTA, INTB, INTC and INTD
> > > interrupts.
> > > 
> > > Note that for this support, device tree files has to be properly adjusted
> > > to provide "interrupts" or "interrupts-extended" property with intx
> > > interrupt source, "interrupt-names" property with "intx" string and also
> > > 'interrupt-controller' subnode must be defined.
> > > 
> > > If device tree files do not provide these nodes then driver would work as
> > > before.
> > > 
> > > Signed-off-by: Pali Rohár <pali@kernel.org>
> > > ---
> > >  drivers/pci/controller/pci-mvebu.c | 182 +++++++++++++++++++++++++++--
> > >  1 file changed, 174 insertions(+), 8 deletions(-)
> > > 
> > > diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> > > index 1e90ab888075..04bcdd7b7a6d 100644
> > > --- a/drivers/pci/controller/pci-mvebu.c
> > > +++ b/drivers/pci/controller/pci-mvebu.c
> > > @@ -54,9 +54,10 @@
> > >  	 PCIE_CONF_ADDR_EN)
> > >  #define PCIE_CONF_DATA_OFF	0x18fc
> > >  #define PCIE_INT_CAUSE_OFF	0x1900
> > > +#define PCIE_INT_UNMASK_OFF	0x1910
> > > +#define  PCIE_INT_INTX(i)		BIT(24+i)
> > >  #define  PCIE_INT_PM_PME		BIT(28)
> > > -#define PCIE_MASK_OFF		0x1910
> > > -#define  PCIE_MASK_ENABLE_INTS          0x0f000000
> > > +#define  PCIE_INT_ALL_MASK		GENMASK(31, 0)
> > >  #define PCIE_CTRL_OFF		0x1a00
> > >  #define  PCIE_CTRL_X1_MODE		0x0001
> > >  #define  PCIE_CTRL_RC_MODE		BIT(1)
> > > @@ -110,6 +111,10 @@ struct mvebu_pcie_port {
> > >  	struct mvebu_pcie_window iowin;
> > >  	u32 saved_pcie_stat;
> > >  	struct resource regs;
> > > +	struct irq_domain *intx_irq_domain;
> > > +	struct irq_chip intx_irq_chip;
> > 
> > Why is this structure per port? It really should be global. Printing
> > the port number in the name isn't enough of a reason.
> 
> Because each port has its own independent set of INTA-INTD
> interrupts.

That doesn't warrant a copy of an irq_chip structure that contains the
exact same callbacks, and only differs by *a string*. And the use of
this string is only to end-up in /proc/interrupts, which is totally
pointless.

> 
> > > +	raw_spinlock_t irq_lock;
> > > +	int intx_irq;
> > >  };
> > >  
> > >  static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
> > > @@ -235,7 +240,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
> > >  
> > >  static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> > >  {
> > > -	u32 ctrl, lnkcap, cmd, dev_rev, mask;
> > > +	u32 ctrl, lnkcap, cmd, dev_rev, unmask;
> > >  
> > >  	/* Setup PCIe controller to Root Complex mode. */
> > >  	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
> > > @@ -288,10 +293,30 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> > >  	/* Point PCIe unit MBUS decode windows to DRAM space. */
> > >  	mvebu_pcie_setup_wins(port);
> > >  
> > > -	/* Enable interrupt lines A-D. */
> > > -	mask = mvebu_readl(port, PCIE_MASK_OFF);
> > > -	mask |= PCIE_MASK_ENABLE_INTS;
> > > -	mvebu_writel(port, mask, PCIE_MASK_OFF);
> > > +	/* Mask all interrupt sources. */
> > > +	mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
> > > +
> > > +	/* Clear all interrupt causes. */
> > > +	mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
> > > +
> > > +	if (port->intx_irq <= 0) {
> > > +		/*
> > > +		 * When neither "summary" interrupt, nor "intx" interrupt was
> > > +		 * specified in DT then unmask all legacy INTx interrupts as in
> > > +		 * this case driver does not provide a way for masking and
> > > +		 * unmasking of individual legacy INTx interrupts. In this case
> > > +		 * all interrupts, including legacy INTx are reported via one
> > > +		 * shared GIC source and therefore kernel cannot distinguish
> > > +		 * which individual legacy INTx was triggered. These interrupts
> > > +		 * are shared, so it should not cause any issue. Just
> > > +		 * performance penalty as every PCIe interrupt handler needs to
> > > +		 * be called when some interrupt is triggered.
> > > +		 */
> > > +		unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > +		unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
> > > +			  PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
> > > +		mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > 
> > Maybe worth printing a warning here, so that the user knows they are
> > on thin ice.
> 
> Ok. I can add it here. Anyway, this is default current state without
> this patch.
> 
> > > +	}
> > >  }
> > >  
> > >  static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
> > > @@ -924,6 +949,109 @@ static struct pci_ops mvebu_pcie_ops = {
> > >  	.write = mvebu_pcie_wr_conf,
> > >  };
> > >  
> > > +static void mvebu_pcie_intx_irq_mask(struct irq_data *d)
> > > +{
> > > +	struct mvebu_pcie_port *port = d->domain->host_data;
> > > +	irq_hw_number_t hwirq = irqd_to_hwirq(d);
> > > +	unsigned long flags;
> > > +	u32 unmask;
> > > +
> > > +	raw_spin_lock_irqsave(&port->irq_lock, flags);
> > > +	unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > +	unmask &= ~PCIE_INT_INTX(hwirq);
> > > +	mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > > +	raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> > > +}
> > > +
> > > +static void mvebu_pcie_intx_irq_unmask(struct irq_data *d)
> > > +{
> > > +	struct mvebu_pcie_port *port = d->domain->host_data;
> > > +	irq_hw_number_t hwirq = irqd_to_hwirq(d);
> > > +	unsigned long flags;
> > > +	u32 unmask;
> > > +
> > > +	raw_spin_lock_irqsave(&port->irq_lock, flags);
> > > +	unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> > > +	unmask |= PCIE_INT_INTX(hwirq);
> > > +	mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> > > +	raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> > > +}
> > > +
> > > +static int mvebu_pcie_intx_irq_map(struct irq_domain *h,
> > > +				   unsigned int virq, irq_hw_number_t hwirq)
> > > +{
> > > +	struct mvebu_pcie_port *port = h->host_data;
> > > +
> > > +	irq_set_status_flags(virq, IRQ_LEVEL);
> > > +	irq_set_chip_and_handler(virq, &port->intx_irq_chip, handle_level_irq);
> > > +	irq_set_chip_data(virq, port);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = {
> > > +	.map = mvebu_pcie_intx_irq_map,
> > > +	.xlate = irq_domain_xlate_onecell,
> > > +};
> > > +
> > > +static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
> > > +{
> > > +	struct device *dev = &port->pcie->pdev->dev;
> > > +	struct device_node *pcie_intc_node;
> > > +
> > > +	raw_spin_lock_init(&port->irq_lock);
> > > +
> > > +	port->intx_irq_chip.name = devm_kasprintf(dev, GFP_KERNEL,
> > > +						  "mvebu-%s-INTx",
> > > +						  port->name);
> > 
> > That's exactly what I really don't want to see. It prevents sharing of
> > the irq_chip structure, and gets in the way of making it const in the
> > future. Yes, I know that some drivers do that. I can't fix those,
> > because /proc/interrupts is ABI. But I really don't want to see more
> > of these.
> 
> Well, I do not understand why it should be shared and with who. HW has N
> independent IRQ chips for legacy interrupts. And each one will be
> specified in DT per HW layout / design.

If you have multiple ports, all the ports can share the irq_chip
structure. Actually scratch that. They *MUST* share the structure. The
only reason you're not sharing it is to be able to print this useless
string in /proc/interrupts.

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-01-06 15:56 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 15:02 [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-05 15:02 ` [PATCH 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-05 15:02 ` [PATCH 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-05 15:02 ` [PATCH 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-05 15:02 ` [PATCH 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12  1:29   ` Rob Herring
2022-01-05 15:02 ` [PATCH 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-05 15:02 ` [PATCH 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-05 15:02 ` [PATCH 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-05 15:02 ` [PATCH 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-05 15:41   ` Rob Herring
2022-01-05 15:49     ` Pali Rohár
2022-01-12  1:43     ` Pali Rohár
2022-01-12 14:53       ` Rob Herring
2022-01-05 15:02 ` [PATCH 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12  1:30   ` Rob Herring
2022-01-05 15:02 ` [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-06 15:28   ` Marc Zyngier
2022-01-06 15:44     ` Pali Rohár
2022-01-06 15:55       ` Marc Zyngier [this message]
2022-01-06 16:20         ` Pali Rohár
2022-01-06 16:27           ` Marc Zyngier
2022-01-06 17:20             ` Marek Behún
2022-01-06 17:31               ` Marc Zyngier
2022-01-07 11:50                 ` Pali Rohár
2022-01-07 18:53                   ` Marc Zyngier
2022-01-05 15:02 ` [PATCH 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-12 15:18 ` [PATCH v2 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-12 15:18   ` [PATCH v2 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-12 15:18   ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-12 15:18   ` [PATCH v2 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-12 15:18   ` [PATCH v2 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 15:18   ` [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-20 17:09     ` Rob Herring
2022-01-20 17:19       ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-12 15:18   ` [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-12 15:18   ` [PATCH v2 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-20 16:49     ` Rob Herring
2022-01-20 16:55       ` Pali Rohár
2022-01-20 18:40         ` Rob Herring
2022-01-12 15:18   ` [PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 15:36     ` Marek Behún
2022-01-12 15:18   ` [PATCH v2 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-02-11 17:19     ` Lorenzo Pieralisi
2022-02-11 17:52       ` Pali Rohár
2022-02-11 18:21         ` Lorenzo Pieralisi
2022-02-12 10:59           ` Marc Zyngier
2022-02-16 23:40         ` Pali Rohár
2022-02-22 10:21           ` Lorenzo Pieralisi
2022-02-22 10:51             ` Pali Rohár
2022-02-22 15:24               ` Lorenzo Pieralisi
2022-02-22 15:42                 ` Pali Rohár
2022-02-22 15:45                   ` Lorenzo Pieralisi
2022-02-22 15:55                     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-02-14 15:07     ` Gregory CLEMENT
2022-02-14 15:09       ` Pali Rohár
2022-02-14 15:26         ` Gregory CLEMENT
     [not found]           ` <CAEzXK1qYKVk7QiSY_DwqkZ7WV6WU06WBtiqZx0JJCc+mOP-7Kg@mail.gmail.com>
2022-02-15 10:48             ` Luís Mendes
2022-02-15 10:52               ` Pali Rohár
2022-02-18 21:53                 ` Luís Mendes
2022-02-19 13:36                   ` Pali Rohár
2022-02-11 17:50 ` [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Lorenzo Pieralisi
2022-02-11 18:01   ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878rvsvoyo.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pali@kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).