* [PATCH 00/11] Add imx8ulp basic dtsi support @ 2021-06-07 8:39 Jacky Bai 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai ` (10 more replies) 0 siblings, 11 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel i.MX 8ULP is part of the ULP family with emphasis on extreme low-power techniques using the 28 nm fully depleted silicon on insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric architecture, however will add a third DSP domain for advanced voice/audio capability and a Graphics domain where it is possible to access graphics resources from the application side or the realtime side. This patchset adds the basic dtsi support for i.MX8ULP, and also update the dt-bindings docs for i.MX8ULP. Jacky Bai (11): dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindings: clock: Add imx8ulp clock support arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/clock/imx8ulp-clock.yaml | 72 ++ .../devicetree/bindings/gpio/gpio-vf610.yaml | 3 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- .../bindings/mmc/fsl-imx-esdhc.yaml | 4 + .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 143 +++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ include/dt-bindings/clock/imx8ulp-clock.h | 261 +++++ 14 files changed, 1965 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-09 10:56 ` Linus Walleij ` (2 more replies) 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai ` (9 subsequent siblings) 10 siblings, 3 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel Add the compatible string for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/gpio/gpio-vf610.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index 19738a457a58..e1359391d3a4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -24,6 +24,9 @@ properties: - items: - const: fsl,imx7ulp-gpio - const: fsl,vf610-gpio + - items: + - const: fsl,imx8ulp-gpio + - const: fsl,imx7ulp-gpio reg: description: The first reg tuple represents the PORT module, the second tuple -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai @ 2021-06-09 10:56 ` Linus Walleij 2021-06-11 13:45 ` Dong Aisheng 2021-06-16 23:42 ` Rob Herring 2 siblings, 0 replies; 36+ messages in thread From: Linus Walleij @ 2021-06-09 10:56 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Dong Aisheng, Fabio Estevam, Sascha Hauer, NXP Linux Team, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux ARM On Mon, Jun 7, 2021 at 10:29 AM Jacky Bai <ping.bai@nxp.com> wrote: > Add the compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-09 10:56 ` Linus Walleij @ 2021-06-11 13:45 ` Dong Aisheng 2021-06-16 23:42 ` Rob Herring 2 siblings, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:45 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:31 PM Jacky Bai <ping.bai@nxp.com> wrote: > > Add the compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/gpio/gpio-vf610.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml > index 19738a457a58..e1359391d3a4 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml > +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml > @@ -24,6 +24,9 @@ properties: > - items: > - const: fsl,imx7ulp-gpio > - const: fsl,vf610-gpio > + - items: > + - const: fsl,imx8ulp-gpio > + - const: fsl,imx7ulp-gpio > > reg: > description: The first reg tuple represents the PORT module, the second tuple > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-09 10:56 ` Linus Walleij 2021-06-11 13:45 ` Dong Aisheng @ 2021-06-16 23:42 ` Rob Herring 2 siblings, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:42 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, robh+dt, festevam, s.hauer, linus.walleij, aisheng.dong, sboyd, linux-imx, devicetree, kernel, linux-arm-kernel On Mon, 07 Jun 2021 16:39:11 +0800, Jacky Bai wrote: > Add the compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/gpio/gpio-vf610.yaml | 3 +++ > 1 file changed, 3 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:46 ` Dong Aisheng 2021-06-16 23:43 ` Rob Herring 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai ` (8 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel Add the compatible for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 29b9447f3b84..0875753c7d15 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -19,7 +19,9 @@ properties: - fsl,imx7ulp-lpi2c - fsl,imx8qm-lpi2c - items: - - const: fsl,imx8qxp-lpi2c + - enum: + - fsl,imx8qxp-lpi2c + - fsl,imx8ulp-lpi2c - const: fsl,imx7ulp-lpi2c reg: -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai @ 2021-06-11 13:46 ` Dong Aisheng 2021-06-16 23:43 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:46 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:31 PM Jacky Bai <ping.bai@nxp.com> wrote: > > Add the compatible for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml > index 29b9447f3b84..0875753c7d15 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml > @@ -19,7 +19,9 @@ properties: > - fsl,imx7ulp-lpi2c > - fsl,imx8qm-lpi2c > - items: > - - const: fsl,imx8qxp-lpi2c > + - enum: > + - fsl,imx8qxp-lpi2c > + - fsl,imx8ulp-lpi2c > - const: fsl,imx7ulp-lpi2c > > reg: > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai 2021-06-11 13:46 ` Dong Aisheng @ 2021-06-16 23:43 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:43 UTC (permalink / raw) To: Jacky Bai Cc: linus.walleij, linux-arm-kernel, devicetree, kernel, shawnguo, festevam, linux-imx, s.hauer, aisheng.dong, robh+dt, sboyd On Mon, 07 Jun 2021 16:39:12 +0800, Jacky Bai wrote: > Add the compatible for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:50 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai ` (7 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel For i.MX8ULP, it uses two compatible strings, so update the compatible string for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 369471814496..aeee2be1e36a 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -42,6 +42,10 @@ properties: - fsl,imx8qm-usdhc - fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc + - items: + - enum: + - fsl,imx8ulp-usdhc + - const: fsl,imx8mm-usdhc reg: maxItems: 1 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai @ 2021-06-11 13:50 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:50 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:32 PM Jacky Bai <ping.bai@nxp.com> wrote: > > For i.MX8ULP, it uses two compatible strings, so update > the compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Probably the commit message is better to be improved. e.g. uSDHC on i.MX8ULP is derived from i.MX8MM. Otherwise Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index 369471814496..aeee2be1e36a 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -42,6 +42,10 @@ properties: > - fsl,imx8qm-usdhc > - fsl,imx8qxp-usdhc > - const: fsl,imx7d-usdhc > + - items: > + - enum: > + - fsl,imx8ulp-usdhc > + - const: fsl,imx8mm-usdhc > > reg: > maxItems: 1 > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai 2021-06-11 13:50 ` Dong Aisheng @ 2021-06-16 23:44 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:44 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong, festevam, kernel, linux-imx, devicetree, linux-arm-kernel On Mon, Jun 07, 2021 at 04:39:13PM +0800, Jacky Bai wrote: > For i.MX8ULP, it uses two compatible strings, so update > the compatible string for i.MX8ULP. typo in the subject > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++++ > 1 file changed, 4 insertions(+) Otherwise, Acked-by: Rob Herring <robh@kernel.org> > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index 369471814496..aeee2be1e36a 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -42,6 +42,10 @@ properties: > - fsl,imx8qm-usdhc > - fsl,imx8qxp-usdhc > - const: fsl,imx7d-usdhc > + - items: > + - enum: > + - fsl,imx8ulp-usdhc > + - const: fsl,imx8mm-usdhc > > reg: > maxItems: 1 > -- > 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (2 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:52 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai ` (6 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel For i.MX8ULP, it uses two compatible strings, so Update the compatible string for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index bd21060d26e0..5d3fde5d4d2b 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -22,7 +22,9 @@ properties: - fsl,imx7ulp-lpuart - fsl,imx8qm-lpuart - items: - - const: fsl,imx8qxp-lpuart + - enum: + - fsl,imx8qxp-lpuart + - fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart reg: -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai @ 2021-06-11 13:52 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:52 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE n Mon, Jun 7, 2021 at 4:33 PM Jacky Bai <ping.bai@nxp.com> wrote: > > For i.MX8ULP, it uses two compatible strings, so Update the > compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> As the previous patch, the commit message is better to be improved. Otherwise Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > index bd21060d26e0..5d3fde5d4d2b 100644 > --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > @@ -22,7 +22,9 @@ properties: > - fsl,imx7ulp-lpuart > - fsl,imx8qm-lpuart > - items: > - - const: fsl,imx8qxp-lpuart > + - enum: > + - fsl,imx8qxp-lpuart > + - fsl,imx8ulp-lpuart > - const: fsl,imx7ulp-lpuart > > reg: > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai 2021-06-11 13:52 ` Dong Aisheng @ 2021-06-16 23:44 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:44 UTC (permalink / raw) To: Jacky Bai Cc: aisheng.dong, robh+dt, linus.walleij, devicetree, linux-arm-kernel, shawnguo, s.hauer, festevam, sboyd, linux-imx, kernel On Mon, 07 Jun 2021 16:39:14 +0800, Jacky Bai wrote: > For i.MX8ULP, it uses two compatible strings, so Update the > compatible string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 05/11] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (3 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:57 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai ` (5 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel For i.MX8ULP, it uses two compatible strings, so update the comaptible strings. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 312d8fee9dbb..1d46877fe46a 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -14,10 +14,13 @@ allOf: properties: compatible: - enum: - - fsl,imx7ulp-spi - - fsl,imx8qxp-spi - + oneOf: + - enum: + - fsl,imx7ulp-spi + - fsl,imx8qxp-spi + - items: + - const: fsl,imx8ulp-spi + - const: fsl,imx7ulp-spi reg: maxItems: 1 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 05/11] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai @ 2021-06-11 13:57 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:57 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:33 PM Jacky Bai <ping.bai@nxp.com> wrote: > > For i.MX8ULP, it uses two compatible strings, so update the > comaptible strings. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> As previously mentioned, pls improve commit message, otherwise: Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml > index 312d8fee9dbb..1d46877fe46a 100644 > --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml > @@ -14,10 +14,13 @@ allOf: > > properties: > compatible: > - enum: > - - fsl,imx7ulp-spi > - - fsl,imx8qxp-spi > - > + oneOf: > + - enum: > + - fsl,imx7ulp-spi > + - fsl,imx8qxp-spi > + - items: > + - const: fsl,imx8ulp-spi > + - const: fsl,imx7ulp-spi > reg: > maxItems: 1 > > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 05/11] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai 2021-06-11 13:57 ` Dong Aisheng @ 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:45 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong, festevam, kernel, linux-imx, devicetree, linux-arm-kernel On Mon, Jun 07, 2021 at 04:39:15PM +0800, Jacky Bai wrote: > For i.MX8ULP, it uses two compatible strings, so update the > comaptible strings. typo here. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 06/11] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (4 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai ` (4 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel For i.MX8ULP, it use two compatible strings, so update the compatible strings for it. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml index edd9585f6726..f69773a8e4b9 100644 --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml @@ -19,7 +19,11 @@ description: | properties: compatible: - const: fsl,imx7ulp-tpm + oneOf: + - const: fsl,imx7ulp-tpm + - items: + - const: fsl,imx8ulp-tpm + - const: fsl,imx7ulp-tpm reg: maxItems: 1 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 06/11] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai @ 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:58 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:34 PM Jacky Bai <ping.bai@nxp.com> wrote: > > For i.MX8ULP, it use two compatible strings, so update the > compatible strings for it. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> As previously mentioned, pls improve commit message, otherwise: Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml > index edd9585f6726..f69773a8e4b9 100644 > --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml > +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml > @@ -19,7 +19,11 @@ description: | > > properties: > compatible: > - const: fsl,imx7ulp-tpm > + oneOf: > + - const: fsl,imx7ulp-tpm > + - items: > + - const: fsl,imx8ulp-tpm > + - const: fsl,imx7ulp-tpm > > reg: > maxItems: 1 > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 06/11] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai 2021-06-11 13:58 ` Dong Aisheng @ 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:45 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, s.hauer, linux-imx, devicetree, robh+dt, sboyd, linux-arm-kernel, festevam, linus.walleij, aisheng.dong, kernel On Mon, 07 Jun 2021 16:39:16 +0800, Jacky Bai wrote: > For i.MX8ULP, it use two compatible strings, so update the > compatible strings for it. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (5 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai ` (3 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel For i.MX8ULP, it uses two compatible strings, so Add the compatible string for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- .../devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml index 51d6d482bbc2..fb603a20e396 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml @@ -14,8 +14,11 @@ allOf: properties: compatible: - enum: - - fsl,imx7ulp-wdt + oneOf: + - const: fsl,imx7ulp-wdt + - items: + - const: fsl,imx8ulp-wdt + - const: fsl,imx7ulp-wdt reg: maxItems: 1 -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai @ 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:58 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:35 PM Jacky Bai <ping.bai@nxp.com> wrote: > > For i.MX8ULP, it uses two compatible strings, so Add the compatible > string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> As previously mentioned, pls improve commit message, otherwise: Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > .../devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml > index 51d6d482bbc2..fb603a20e396 100644 > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml > @@ -14,8 +14,11 @@ allOf: > > properties: > compatible: > - enum: > - - fsl,imx7ulp-wdt > + oneOf: > + - const: fsl,imx7ulp-wdt > + - items: > + - const: fsl,imx8ulp-wdt > + - const: fsl,imx7ulp-wdt > > reg: > maxItems: 1 > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai 2021-06-11 13:58 ` Dong Aisheng @ 2021-06-16 23:45 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:45 UTC (permalink / raw) To: Jacky Bai Cc: kernel, festevam, linux-imx, devicetree, aisheng.dong, shawnguo, linus.walleij, s.hauer, sboyd, robh+dt, linux-arm-kernel On Mon, 07 Jun 2021 16:39:17 +0800, Jacky Bai wrote: > For i.MX8ULP, it uses two compatible strings, so Add the compatible > string for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > .../devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (6 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 13:59 ` Dong Aisheng 2021-06-16 23:46 ` Rob Herring 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai ` (2 subsequent siblings) 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel Add the dt binding for i.MX8ULP EVK board. i.MX 8ULP is part of the ULP family with emphasis on extreme low-power techniques using the 28 nm fully depleted silicon on insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric architecture, however will add a third DSP domain for advanced voice/audio capability and a Graphics domain where it is possible to access graphics resources from the application side or the realtime side. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index fce2a8670b49..e68a1b43b144 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -788,6 +788,12 @@ properties: - const: toradex,colibri-imx8x - const: fsl,imx8qxp + - description: i.MX8ULP based Boards + items: + - enum: + - fsl,imx8ulp-evk # i.MX8ULP EVK Board + - const: fsl,imx8ulp + - description: Freescale Vybrid Platform Device Tree Bindings -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai @ 2021-06-11 13:59 ` Dong Aisheng 2021-06-16 23:46 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 13:59 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:36 PM Jacky Bai <ping.bai@nxp.com> wrote: > > Add the dt binding for i.MX8ULP EVK board. > > i.MX 8ULP is part of the ULP family with emphasis on extreme > low-power techniques using the 28 nm fully depleted silicon on > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be > based on asymmetric architecture, however will add a third DSP > domain for advanced voice/audio capability and a Graphics domain > where it is possible to access graphics resources from the > application side or the realtime side. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Aisheng > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml > index fce2a8670b49..e68a1b43b144 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.yaml > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml > @@ -788,6 +788,12 @@ properties: > - const: toradex,colibri-imx8x > - const: fsl,imx8qxp > > + - description: i.MX8ULP based Boards > + items: > + - enum: > + - fsl,imx8ulp-evk # i.MX8ULP EVK Board > + - const: fsl,imx8ulp > + > - description: > Freescale Vybrid Platform Device Tree Bindings > > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai 2021-06-11 13:59 ` Dong Aisheng @ 2021-06-16 23:46 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:46 UTC (permalink / raw) To: Jacky Bai Cc: linux-arm-kernel, festevam, linux-imx, linus.walleij, aisheng.dong, kernel, sboyd, s.hauer, shawnguo, robh+dt, devicetree On Mon, 07 Jun 2021 16:39:18 +0800, Jacky Bai wrote: > Add the dt binding for i.MX8ULP EVK board. > > i.MX 8ULP is part of the ULP family with emphasis on extreme > low-power techniques using the 28 nm fully depleted silicon on > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be > based on asymmetric architecture, however will add a third DSP > domain for advanced voice/audio capability and a Graphics domain > where it is possible to access graphics resources from the > application side or the realtime side. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (7 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 14:17 ` Dong Aisheng 2021-06-16 23:47 ` Rob Herring 2021-06-07 8:39 ` [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Jacky Bai [not found] ` <20210607083921.2668568-11-ping.bai@nxp.com> 10 siblings, 2 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel Add the clock dt-binding file for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- .../bindings/clock/imx8ulp-clock.yaml | 72 +++++ include/dt-bindings/clock/imx8ulp-clock.h | 261 ++++++++++++++++++ 2 files changed, 333 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml new file mode 100644 index 000000000000..ffe7b713d4e7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8ulp-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP Clock Control Module Binding + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + On i.MX8ULP, The clock sources generation, distribution and management is + under the control of several CGCs & PCCs modules. The CGC modules generate + and distribute clocks on the device. PCC modules control clock selection, + optional division and clock gating mode for peripherals + +properties: + compatible: + enum: + - fsl,imx8ulp-cgc1 + - fsl,imx8ulp-cgc2 + - fsl,imx8ulp-pcc3 + - fsl,imx8ulp-pcc4 + - fsl,imx8ulp-pcc5 + + reg: + maxItems: 1 + + clocks: + description: + specify the external clocks used by the CGC module, the clocks + are rosc, sosc, frosc, lposc + maxItems: 4 + + clock-names: + description: + specify the external clocks names used by the CGC module. the valid + clock names should rosc, sosc, frosc, lposc. + maxItems: 4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8ulp-clock.h + for the full list of i.MX8ULP clock IDs. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + clock-controller@292c0000 { + compatible = "fsl,imx8ulp-cgc1"; + reg = <0x292c0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; + clock-names = "rosc", "sosc", "frosc", "lposc"; + #clock-cells = <1>; + }; + + - | + clock-controller@292d0000 { + compatible = "fsl,imx8ulp-pcc3"; + reg = <0x292d0000 0x10000>; + #clock-cells = <1>; + }; diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h new file mode 100644 index 000000000000..61518775f434 --- /dev/null +++ b/include/dt-bindings/clock/imx8ulp-clock.h @@ -0,0 +1,261 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2021 NXP + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H +#define __DT_BINDINGS_CLOCK_IMX8ULP_H + +#define IMX8ULP_CLK_DUMMY 0 +#define IMX8ULP_CLK_ROSC 1 +#define IMX8ULP_CLK_FROSC 2 +#define IMX8ULP_CLK_LPOSC 3 +#define IMX8ULP_CLK_SOSC 4 + +/* CGC1 */ +#define IMX8ULP_CLK_SPLL2 5 +#define IMX8ULP_CLK_SPLL3 6 +#define IMX8ULP_CLK_A35_SEL 7 +#define IMX8ULP_CLK_A35_DIV 8 +#define IMX8ULP_CLK_SPLL2_PRE_SEL 9 +#define IMX8ULP_CLK_SPLL3_PRE_SEL 10 +#define IMX8ULP_CLK_SPLL3_PFD0 11 +#define IMX8ULP_CLK_SPLL3_PFD1 12 +#define IMX8ULP_CLK_SPLL3_PFD2 13 +#define IMX8ULP_CLK_SPLL3_PFD3 14 +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1 15 +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2 16 +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1 17 +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2 18 +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1 19 +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2 20 +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1 21 +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2 22 +#define IMX8ULP_CLK_NIC_SEL 23 +#define IMX8ULP_CLK_NIC_AD_DIVPLAT 24 +#define IMX8ULP_CLK_NIC_PER_DIVPLAT 25 +#define IMX8ULP_CLK_XBAR_SEL 26 +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT 27 +#define IMX8ULP_CLK_XBAR_DIVBUS 28 +#define IMX8ULP_CLK_XBAR_AD_SLOW 29 +#define IMX8ULP_CLK_SOSC_DIV1 30 +#define IMX8ULP_CLK_SOSC_DIV2 31 +#define IMX8ULP_CLK_SOSC_DIV3 32 +#define IMX8ULP_CLK_FROSC_DIV1 33 +#define IMX8ULP_CLK_FROSC_DIV2 34 +#define IMX8ULP_CLK_FROSC_DIV3 35 +#define IMX8ULP_CLK_SPLL3_VCODIV 36 +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE 37 +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE 38 +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE 39 +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE 40 +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE 41 +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE 42 +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE 43 +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE 44 +#define IMX8ULP_CLK_SOSC_DIV1_GATE 45 +#define IMX8ULP_CLK_SOSC_DIV2_GATE 46 +#define IMX8ULP_CLK_SOSC_DIV3_GATE 47 +#define IMX8ULP_CLK_FROSC_DIV1_GATE 48 +#define IMX8ULP_CLK_FROSC_DIV2_GATE 49 +#define IMX8ULP_CLK_FROSC_DIV3_GATE 50 +#define IMX8ULP_CLK_SAI4_SEL 51 +#define IMX8ULP_CLK_SAI5_SEL 52 +#define IMX8ULP_CLK_AUD_CLK1 53 +#define IMX8ULP_CLK_ARM 54 +#define IMX8ULP_CLK_ENET_TS_SEL 55 + +#define IMX8ULP_CLK_CGC1_END 56 + +/* CGC2 */ +#define IMX8ULP_CLK_PLL4_PRE_SEL 0 +#define IMX8ULP_CLK_PLL4 1 +#define IMX8ULP_CLK_PLL4_VCODIV 2 +#define IMX8ULP_CLK_DDR_SEL 3 +#define IMX8ULP_CLK_DDR_DIV 4 +#define IMX8ULP_CLK_LPAV_AXI_SEL 5 +#define IMX8ULP_CLK_LPAV_AXI_DIV 6 +#define IMX8ULP_CLK_LPAV_AHB_DIV 7 +#define IMX8ULP_CLK_LPAV_BUS_DIV 8 +#define IMX8ULP_CLK_PLL4_PFD0 9 +#define IMX8ULP_CLK_PLL4_PFD1 10 +#define IMX8ULP_CLK_PLL4_PFD2 11 +#define IMX8ULP_CLK_PLL4_PFD3 12 +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE 13 +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE 14 +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE 15 +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE 16 +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE 17 +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE 18 +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE 19 +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE 20 +#define IMX8ULP_CLK_PLL4_PFD0_DIV1 21 +#define IMX8ULP_CLK_PLL4_PFD0_DIV2 22 +#define IMX8ULP_CLK_PLL4_PFD1_DIV1 23 +#define IMX8ULP_CLK_PLL4_PFD1_DIV2 24 +#define IMX8ULP_CLK_PLL4_PFD2_DIV1 25 +#define IMX8ULP_CLK_PLL4_PFD2_DIV2 26 +#define IMX8ULP_CLK_PLL4_PFD3_DIV1 27 +#define IMX8ULP_CLK_PLL4_PFD3_DIV2 28 +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE 29 +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE 30 +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE 31 +#define IMX8ULP_CLK_CGC2_SOSC_DIV1 32 +#define IMX8ULP_CLK_CGC2_SOSC_DIV2 33 +#define IMX8ULP_CLK_CGC2_SOSC_DIV3 34 +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE 35 +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE 36 +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE 37 +#define IMX8ULP_CLK_CGC2_FROSC_DIV1 38 +#define IMX8ULP_CLK_CGC2_FROSC_DIV2 39 +#define IMX8ULP_CLK_CGC2_FROSC_DIV3 40 +#define IMX8ULP_CLK_AUD_CLK2 41 +#define IMX8ULP_CLK_SAI6_SEL 42 +#define IMX8ULP_CLK_SAI7_SEL 43 +#define IMX8ULP_CLK_SPDIF_SEL 44 +#define IMX8ULP_CLK_HIFI_SEL 45 +#define IMX8ULP_CLK_HIFI_DIVCORE 46 +#define IMX8ULP_CLK_HIFI_DIVPLAT 47 +#define IMX8ULP_CLK_DSI_PHY_REF 48 + +#define IMX8ULP_CLK_CGC2_END 49 + +/* PCC3 */ +#define IMX8ULP_CLK_WDOG3 0 +#define IMX8ULP_CLK_WDOG4 1 +#define IMX8ULP_CLK_LPIT1 2 +#define IMX8ULP_CLK_TPM4 3 +#define IMX8ULP_CLK_TPM5 4 +#define IMX8ULP_CLK_FLEXIO1 5 +#define IMX8ULP_CLK_I3C2 6 +#define IMX8ULP_CLK_LPI2C4 7 +#define IMX8ULP_CLK_LPI2C5 8 +#define IMX8ULP_CLK_LPUART4 9 +#define IMX8ULP_CLK_LPUART5 10 +#define IMX8ULP_CLK_LPSPI4 11 +#define IMX8ULP_CLK_LPSPI5 12 +#define IMX8ULP_CLK_DMA1_MP 13 +#define IMX8ULP_CLK_DMA1_CH0 14 +#define IMX8ULP_CLK_DMA1_CH1 15 +#define IMX8ULP_CLK_DMA1_CH2 16 +#define IMX8ULP_CLK_DMA1_CH3 17 +#define IMX8ULP_CLK_DMA1_CH4 18 +#define IMX8ULP_CLK_DMA1_CH5 19 +#define IMX8ULP_CLK_DMA1_CH6 20 +#define IMX8ULP_CLK_DMA1_CH7 21 +#define IMX8ULP_CLK_DMA1_CH8 22 +#define IMX8ULP_CLK_DMA1_CH9 23 +#define IMX8ULP_CLK_DMA1_CH10 24 +#define IMX8ULP_CLK_DMA1_CH11 25 +#define IMX8ULP_CLK_DMA1_CH12 26 +#define IMX8ULP_CLK_DMA1_CH13 27 +#define IMX8ULP_CLK_DMA1_CH14 28 +#define IMX8ULP_CLK_DMA1_CH15 29 +#define IMX8ULP_CLK_DMA1_CH16 30 +#define IMX8ULP_CLK_DMA1_CH17 31 +#define IMX8ULP_CLK_DMA1_CH18 32 +#define IMX8ULP_CLK_DMA1_CH19 33 +#define IMX8ULP_CLK_DMA1_CH20 34 +#define IMX8ULP_CLK_DMA1_CH21 35 +#define IMX8ULP_CLK_DMA1_CH22 36 +#define IMX8ULP_CLK_DMA1_CH23 37 +#define IMX8ULP_CLK_DMA1_CH24 38 +#define IMX8ULP_CLK_DMA1_CH25 39 +#define IMX8ULP_CLK_DMA1_CH26 40 +#define IMX8ULP_CLK_DMA1_CH27 41 +#define IMX8ULP_CLK_DMA1_CH28 42 +#define IMX8ULP_CLK_DMA1_CH29 43 +#define IMX8ULP_CLK_DMA1_CH30 44 +#define IMX8ULP_CLK_DMA1_CH31 45 +#define IMX8ULP_CLK_MU3_A 46 + +#define IMX8ULP_CLK_PCC3_END 47 + +/* PCC4 */ +#define IMX8ULP_CLK_FLEXSPI2 0 +#define IMX8ULP_CLK_TPM6 1 +#define IMX8ULP_CLK_TPM7 2 +#define IMX8ULP_CLK_LPI2C6 3 +#define IMX8ULP_CLK_LPI2C7 4 +#define IMX8ULP_CLK_LPUART6 5 +#define IMX8ULP_CLK_LPUART7 6 +#define IMX8ULP_CLK_SAI4 7 +#define IMX8ULP_CLK_SAI5 8 +#define IMX8ULP_CLK_PCTLE 9 +#define IMX8ULP_CLK_PCTLF 10 +#define IMX8ULP_CLK_USDHC0 11 +#define IMX8ULP_CLK_USDHC1 12 +#define IMX8ULP_CLK_USDHC2 13 +#define IMX8ULP_CLK_USB0 14 +#define IMX8ULP_CLK_USB0_PHY 15 +#define IMX8ULP_CLK_USB1 16 +#define IMX8ULP_CLK_USB1_PHY 17 +#define IMX8ULP_CLK_USB_XBAR 18 +#define IMX8ULP_CLK_ENET 19 +#define IMX8ULP_CLK_SFA1 20 +#define IMX8ULP_CLK_RGPIOE 21 +#define IMX8ULP_CLK_RGPIOF 22 + +#define IMX8ULP_CLK_PCC4_END 23 + +/* PCC5 */ +#define IMX8ULP_CLK_TPM8 0 +#define IMX8ULP_CLK_SAI6 1 +#define IMX8ULP_CLK_SAI7 2 +#define IMX8ULP_CLK_SPDIF 3 +#define IMX8ULP_CLK_ISI 4 +#define IMX8ULP_CLK_CSI_REGS 5 +#define IMX8ULP_CLK_PCTLD 6 +#define IMX8ULP_CLK_CSI 7 +#define IMX8ULP_CLK_DSI 8 +#define IMX8ULP_CLK_WDOG5 9 +#define IMX8ULP_CLK_EPDC 10 +#define IMX8ULP_CLK_PXP 11 +#define IMX8ULP_CLK_SFA2 12 +#define IMX8ULP_CLK_GPU2D 13 +#define IMX8ULP_CLK_GPU3D 14 +#define IMX8ULP_CLK_DC_NANO 15 +#define IMX8ULP_CLK_CSI_CLK_UI 16 +#define IMX8ULP_CLK_CSI_CLK_ESC 17 +#define IMX8ULP_CLK_RGPIOD 18 +#define IMX8ULP_CLK_DMA2_MP 19 +#define IMX8ULP_CLK_DMA2_CH0 20 +#define IMX8ULP_CLK_DMA2_CH1 21 +#define IMX8ULP_CLK_DMA2_CH2 22 +#define IMX8ULP_CLK_DMA2_CH3 23 +#define IMX8ULP_CLK_DMA2_CH4 24 +#define IMX8ULP_CLK_DMA2_CH5 25 +#define IMX8ULP_CLK_DMA2_CH6 26 +#define IMX8ULP_CLK_DMA2_CH7 27 +#define IMX8ULP_CLK_DMA2_CH8 28 +#define IMX8ULP_CLK_DMA2_CH9 29 +#define IMX8ULP_CLK_DMA2_CH10 30 +#define IMX8ULP_CLK_DMA2_CH11 31 +#define IMX8ULP_CLK_DMA2_CH12 32 +#define IMX8ULP_CLK_DMA2_CH13 33 +#define IMX8ULP_CLK_DMA2_CH14 34 +#define IMX8ULP_CLK_DMA2_CH15 35 +#define IMX8ULP_CLK_DMA2_CH16 36 +#define IMX8ULP_CLK_DMA2_CH17 37 +#define IMX8ULP_CLK_DMA2_CH18 38 +#define IMX8ULP_CLK_DMA2_CH19 39 +#define IMX8ULP_CLK_DMA2_CH20 40 +#define IMX8ULP_CLK_DMA2_CH21 41 +#define IMX8ULP_CLK_DMA2_CH22 42 +#define IMX8ULP_CLK_DMA2_CH23 43 +#define IMX8ULP_CLK_DMA2_CH24 44 +#define IMX8ULP_CLK_DMA2_CH25 45 +#define IMX8ULP_CLK_DMA2_CH26 46 +#define IMX8ULP_CLK_DMA2_CH27 47 +#define IMX8ULP_CLK_DMA2_CH28 48 +#define IMX8ULP_CLK_DMA2_CH29 49 +#define IMX8ULP_CLK_DMA2_CH30 50 +#define IMX8ULP_CLK_DMA2_CH31 51 +#define IMX8ULP_CLK_MU2_B 52 +#define IMX8ULP_CLK_MU3_B 53 +#define IMX8ULP_CLK_AVD_SIM 54 +#define IMX8ULP_CLK_DSI_TX_ESC 55 + +#define IMX8ULP_CLK_PCC5_END 56 + +#endif -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai @ 2021-06-11 14:17 ` Dong Aisheng 2021-06-16 23:47 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 14:17 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:39 PM Jacky Bai <ping.bai@nxp.com> wrote: > > Add the clock dt-binding file for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > .../bindings/clock/imx8ulp-clock.yaml | 72 +++++ > include/dt-bindings/clock/imx8ulp-clock.h | 261 ++++++++++++++++++ > 2 files changed, 333 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h > > diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > new file mode 100644 > index 000000000000..ffe7b713d4e7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > @@ -0,0 +1,72 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/imx8ulp-clock.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX8ULP Clock Control Module Binding > + > +maintainers: > + - Jacky Bai <ping.bai@nxp.com> > + > +description: | > + On i.MX8ULP, The clock sources generation, distribution and management is > + under the control of several CGCs & PCCs modules. The CGC modules generate > + and distribute clocks on the device. PCC modules control clock selection, > + optional division and clock gating mode for peripherals > + > +properties: > + compatible: > + enum: > + - fsl,imx8ulp-cgc1 > + - fsl,imx8ulp-cgc2 > + - fsl,imx8ulp-pcc3 > + - fsl,imx8ulp-pcc4 > + - fsl,imx8ulp-pcc5 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: > + specify the external clocks used by the CGC module, the clocks > + are rosc, sosc, frosc, lposc > + maxItems: 4 > + > + clock-names: > + description: > + specify the external clocks names used by the CGC module. the valid > + clock names should rosc, sosc, frosc, lposc. pls list const names for schema to check, then you don't need to have description property > + maxItems: 4 > + > + '#clock-cells': > + const: 1 > + description: > + The clock consumer should specify the desired clock by having the clock > + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8ulp-clock.h > + for the full list of i.MX8ULP clock IDs. > + > +required: > + - compatible > + - reg > + - '#clock-cells' > + missing clocks/clock-names? > +additionalProperties: false > + > +examples: > + # Clock Control Module node: > + - | > + clock-controller@292c0000 { > + compatible = "fsl,imx8ulp-cgc1"; > + reg = <0x292c0000 0x10000>; > + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; > + clock-names = "rosc", "sosc", "frosc", "lposc"; > + #clock-cells = <1>; > + }; > + > + - | > + clock-controller@292d0000 { > + compatible = "fsl,imx8ulp-pcc3"; > + reg = <0x292d0000 0x10000>; > + #clock-cells = <1>; > + }; > diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h > new file mode 100644 > index 000000000000..61518775f434 > --- /dev/null > +++ b/include/dt-bindings/clock/imx8ulp-clock.h > @@ -0,0 +1,261 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright 2021 NXP > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H > +#define __DT_BINDINGS_CLOCK_IMX8ULP_H > + > +#define IMX8ULP_CLK_DUMMY 0 > +#define IMX8ULP_CLK_ROSC 1 > +#define IMX8ULP_CLK_FROSC 2 > +#define IMX8ULP_CLK_LPOSC 3 > +#define IMX8ULP_CLK_SOSC 4 > + > +/* CGC1 */ Should this be on the top to avoid confusing? Regards Aisheng > +#define IMX8ULP_CLK_SPLL2 5 > +#define IMX8ULP_CLK_SPLL3 6 > +#define IMX8ULP_CLK_A35_SEL 7 > +#define IMX8ULP_CLK_A35_DIV 8 > +#define IMX8ULP_CLK_SPLL2_PRE_SEL 9 > +#define IMX8ULP_CLK_SPLL3_PRE_SEL 10 > +#define IMX8ULP_CLK_SPLL3_PFD0 11 > +#define IMX8ULP_CLK_SPLL3_PFD1 12 > +#define IMX8ULP_CLK_SPLL3_PFD2 13 > +#define IMX8ULP_CLK_SPLL3_PFD3 14 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1 15 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2 16 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1 17 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2 18 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1 19 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2 20 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1 21 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2 22 > +#define IMX8ULP_CLK_NIC_SEL 23 > +#define IMX8ULP_CLK_NIC_AD_DIVPLAT 24 > +#define IMX8ULP_CLK_NIC_PER_DIVPLAT 25 > +#define IMX8ULP_CLK_XBAR_SEL 26 > +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT 27 > +#define IMX8ULP_CLK_XBAR_DIVBUS 28 > +#define IMX8ULP_CLK_XBAR_AD_SLOW 29 > +#define IMX8ULP_CLK_SOSC_DIV1 30 > +#define IMX8ULP_CLK_SOSC_DIV2 31 > +#define IMX8ULP_CLK_SOSC_DIV3 32 > +#define IMX8ULP_CLK_FROSC_DIV1 33 > +#define IMX8ULP_CLK_FROSC_DIV2 34 > +#define IMX8ULP_CLK_FROSC_DIV3 35 > +#define IMX8ULP_CLK_SPLL3_VCODIV 36 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE 37 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE 38 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE 39 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE 40 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE 41 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE 42 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE 43 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE 44 > +#define IMX8ULP_CLK_SOSC_DIV1_GATE 45 > +#define IMX8ULP_CLK_SOSC_DIV2_GATE 46 > +#define IMX8ULP_CLK_SOSC_DIV3_GATE 47 > +#define IMX8ULP_CLK_FROSC_DIV1_GATE 48 > +#define IMX8ULP_CLK_FROSC_DIV2_GATE 49 > +#define IMX8ULP_CLK_FROSC_DIV3_GATE 50 > +#define IMX8ULP_CLK_SAI4_SEL 51 > +#define IMX8ULP_CLK_SAI5_SEL 52 > +#define IMX8ULP_CLK_AUD_CLK1 53 > +#define IMX8ULP_CLK_ARM 54 > +#define IMX8ULP_CLK_ENET_TS_SEL 55 > + > +#define IMX8ULP_CLK_CGC1_END 56 > + > +/* CGC2 */ > +#define IMX8ULP_CLK_PLL4_PRE_SEL 0 > +#define IMX8ULP_CLK_PLL4 1 > +#define IMX8ULP_CLK_PLL4_VCODIV 2 > +#define IMX8ULP_CLK_DDR_SEL 3 > +#define IMX8ULP_CLK_DDR_DIV 4 > +#define IMX8ULP_CLK_LPAV_AXI_SEL 5 > +#define IMX8ULP_CLK_LPAV_AXI_DIV 6 > +#define IMX8ULP_CLK_LPAV_AHB_DIV 7 > +#define IMX8ULP_CLK_LPAV_BUS_DIV 8 > +#define IMX8ULP_CLK_PLL4_PFD0 9 > +#define IMX8ULP_CLK_PLL4_PFD1 10 > +#define IMX8ULP_CLK_PLL4_PFD2 11 > +#define IMX8ULP_CLK_PLL4_PFD3 12 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE 13 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE 14 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE 15 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE 16 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE 17 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE 18 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE 19 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE 20 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1 21 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2 22 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1 23 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2 24 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1 25 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2 26 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1 27 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2 28 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE 29 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE 30 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE 31 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1 32 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2 33 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3 34 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE 35 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE 36 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE 37 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1 38 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2 39 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3 40 > +#define IMX8ULP_CLK_AUD_CLK2 41 > +#define IMX8ULP_CLK_SAI6_SEL 42 > +#define IMX8ULP_CLK_SAI7_SEL 43 > +#define IMX8ULP_CLK_SPDIF_SEL 44 > +#define IMX8ULP_CLK_HIFI_SEL 45 > +#define IMX8ULP_CLK_HIFI_DIVCORE 46 > +#define IMX8ULP_CLK_HIFI_DIVPLAT 47 > +#define IMX8ULP_CLK_DSI_PHY_REF 48 > + > +#define IMX8ULP_CLK_CGC2_END 49 > + > +/* PCC3 */ > +#define IMX8ULP_CLK_WDOG3 0 > +#define IMX8ULP_CLK_WDOG4 1 > +#define IMX8ULP_CLK_LPIT1 2 > +#define IMX8ULP_CLK_TPM4 3 > +#define IMX8ULP_CLK_TPM5 4 > +#define IMX8ULP_CLK_FLEXIO1 5 > +#define IMX8ULP_CLK_I3C2 6 > +#define IMX8ULP_CLK_LPI2C4 7 > +#define IMX8ULP_CLK_LPI2C5 8 > +#define IMX8ULP_CLK_LPUART4 9 > +#define IMX8ULP_CLK_LPUART5 10 > +#define IMX8ULP_CLK_LPSPI4 11 > +#define IMX8ULP_CLK_LPSPI5 12 > +#define IMX8ULP_CLK_DMA1_MP 13 > +#define IMX8ULP_CLK_DMA1_CH0 14 > +#define IMX8ULP_CLK_DMA1_CH1 15 > +#define IMX8ULP_CLK_DMA1_CH2 16 > +#define IMX8ULP_CLK_DMA1_CH3 17 > +#define IMX8ULP_CLK_DMA1_CH4 18 > +#define IMX8ULP_CLK_DMA1_CH5 19 > +#define IMX8ULP_CLK_DMA1_CH6 20 > +#define IMX8ULP_CLK_DMA1_CH7 21 > +#define IMX8ULP_CLK_DMA1_CH8 22 > +#define IMX8ULP_CLK_DMA1_CH9 23 > +#define IMX8ULP_CLK_DMA1_CH10 24 > +#define IMX8ULP_CLK_DMA1_CH11 25 > +#define IMX8ULP_CLK_DMA1_CH12 26 > +#define IMX8ULP_CLK_DMA1_CH13 27 > +#define IMX8ULP_CLK_DMA1_CH14 28 > +#define IMX8ULP_CLK_DMA1_CH15 29 > +#define IMX8ULP_CLK_DMA1_CH16 30 > +#define IMX8ULP_CLK_DMA1_CH17 31 > +#define IMX8ULP_CLK_DMA1_CH18 32 > +#define IMX8ULP_CLK_DMA1_CH19 33 > +#define IMX8ULP_CLK_DMA1_CH20 34 > +#define IMX8ULP_CLK_DMA1_CH21 35 > +#define IMX8ULP_CLK_DMA1_CH22 36 > +#define IMX8ULP_CLK_DMA1_CH23 37 > +#define IMX8ULP_CLK_DMA1_CH24 38 > +#define IMX8ULP_CLK_DMA1_CH25 39 > +#define IMX8ULP_CLK_DMA1_CH26 40 > +#define IMX8ULP_CLK_DMA1_CH27 41 > +#define IMX8ULP_CLK_DMA1_CH28 42 > +#define IMX8ULP_CLK_DMA1_CH29 43 > +#define IMX8ULP_CLK_DMA1_CH30 44 > +#define IMX8ULP_CLK_DMA1_CH31 45 > +#define IMX8ULP_CLK_MU3_A 46 > + > +#define IMX8ULP_CLK_PCC3_END 47 > + > +/* PCC4 */ > +#define IMX8ULP_CLK_FLEXSPI2 0 > +#define IMX8ULP_CLK_TPM6 1 > +#define IMX8ULP_CLK_TPM7 2 > +#define IMX8ULP_CLK_LPI2C6 3 > +#define IMX8ULP_CLK_LPI2C7 4 > +#define IMX8ULP_CLK_LPUART6 5 > +#define IMX8ULP_CLK_LPUART7 6 > +#define IMX8ULP_CLK_SAI4 7 > +#define IMX8ULP_CLK_SAI5 8 > +#define IMX8ULP_CLK_PCTLE 9 > +#define IMX8ULP_CLK_PCTLF 10 > +#define IMX8ULP_CLK_USDHC0 11 > +#define IMX8ULP_CLK_USDHC1 12 > +#define IMX8ULP_CLK_USDHC2 13 > +#define IMX8ULP_CLK_USB0 14 > +#define IMX8ULP_CLK_USB0_PHY 15 > +#define IMX8ULP_CLK_USB1 16 > +#define IMX8ULP_CLK_USB1_PHY 17 > +#define IMX8ULP_CLK_USB_XBAR 18 > +#define IMX8ULP_CLK_ENET 19 > +#define IMX8ULP_CLK_SFA1 20 > +#define IMX8ULP_CLK_RGPIOE 21 > +#define IMX8ULP_CLK_RGPIOF 22 > + > +#define IMX8ULP_CLK_PCC4_END 23 > + > +/* PCC5 */ > +#define IMX8ULP_CLK_TPM8 0 > +#define IMX8ULP_CLK_SAI6 1 > +#define IMX8ULP_CLK_SAI7 2 > +#define IMX8ULP_CLK_SPDIF 3 > +#define IMX8ULP_CLK_ISI 4 > +#define IMX8ULP_CLK_CSI_REGS 5 > +#define IMX8ULP_CLK_PCTLD 6 > +#define IMX8ULP_CLK_CSI 7 > +#define IMX8ULP_CLK_DSI 8 > +#define IMX8ULP_CLK_WDOG5 9 > +#define IMX8ULP_CLK_EPDC 10 > +#define IMX8ULP_CLK_PXP 11 > +#define IMX8ULP_CLK_SFA2 12 > +#define IMX8ULP_CLK_GPU2D 13 > +#define IMX8ULP_CLK_GPU3D 14 > +#define IMX8ULP_CLK_DC_NANO 15 > +#define IMX8ULP_CLK_CSI_CLK_UI 16 > +#define IMX8ULP_CLK_CSI_CLK_ESC 17 > +#define IMX8ULP_CLK_RGPIOD 18 > +#define IMX8ULP_CLK_DMA2_MP 19 > +#define IMX8ULP_CLK_DMA2_CH0 20 > +#define IMX8ULP_CLK_DMA2_CH1 21 > +#define IMX8ULP_CLK_DMA2_CH2 22 > +#define IMX8ULP_CLK_DMA2_CH3 23 > +#define IMX8ULP_CLK_DMA2_CH4 24 > +#define IMX8ULP_CLK_DMA2_CH5 25 > +#define IMX8ULP_CLK_DMA2_CH6 26 > +#define IMX8ULP_CLK_DMA2_CH7 27 > +#define IMX8ULP_CLK_DMA2_CH8 28 > +#define IMX8ULP_CLK_DMA2_CH9 29 > +#define IMX8ULP_CLK_DMA2_CH10 30 > +#define IMX8ULP_CLK_DMA2_CH11 31 > +#define IMX8ULP_CLK_DMA2_CH12 32 > +#define IMX8ULP_CLK_DMA2_CH13 33 > +#define IMX8ULP_CLK_DMA2_CH14 34 > +#define IMX8ULP_CLK_DMA2_CH15 35 > +#define IMX8ULP_CLK_DMA2_CH16 36 > +#define IMX8ULP_CLK_DMA2_CH17 37 > +#define IMX8ULP_CLK_DMA2_CH18 38 > +#define IMX8ULP_CLK_DMA2_CH19 39 > +#define IMX8ULP_CLK_DMA2_CH20 40 > +#define IMX8ULP_CLK_DMA2_CH21 41 > +#define IMX8ULP_CLK_DMA2_CH22 42 > +#define IMX8ULP_CLK_DMA2_CH23 43 > +#define IMX8ULP_CLK_DMA2_CH24 44 > +#define IMX8ULP_CLK_DMA2_CH25 45 > +#define IMX8ULP_CLK_DMA2_CH26 46 > +#define IMX8ULP_CLK_DMA2_CH27 47 > +#define IMX8ULP_CLK_DMA2_CH28 48 > +#define IMX8ULP_CLK_DMA2_CH29 49 > +#define IMX8ULP_CLK_DMA2_CH30 50 > +#define IMX8ULP_CLK_DMA2_CH31 51 > +#define IMX8ULP_CLK_MU2_B 52 > +#define IMX8ULP_CLK_MU3_B 53 > +#define IMX8ULP_CLK_AVD_SIM 54 > +#define IMX8ULP_CLK_DSI_TX_ESC 55 > + > +#define IMX8ULP_CLK_PCC5_END 56 > + > +#endif > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai 2021-06-11 14:17 ` Dong Aisheng @ 2021-06-16 23:47 ` Rob Herring 2021-06-17 9:09 ` Jacky Bai 1 sibling, 1 reply; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:47 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong, festevam, kernel, linux-imx, devicetree, linux-arm-kernel On Mon, Jun 07, 2021 at 04:39:19PM +0800, Jacky Bai wrote: > Add the clock dt-binding file for i.MX8ULP. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > .../bindings/clock/imx8ulp-clock.yaml | 72 +++++ > include/dt-bindings/clock/imx8ulp-clock.h | 261 ++++++++++++++++++ > 2 files changed, 333 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h > > diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > new file mode 100644 > index 000000000000..ffe7b713d4e7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > @@ -0,0 +1,72 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license new bindings. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/imx8ulp-clock.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX8ULP Clock Control Module Binding > + > +maintainers: > + - Jacky Bai <ping.bai@nxp.com> > + > +description: | > + On i.MX8ULP, The clock sources generation, distribution and management is > + under the control of several CGCs & PCCs modules. The CGC modules generate > + and distribute clocks on the device. PCC modules control clock selection, > + optional division and clock gating mode for peripherals > + > +properties: > + compatible: > + enum: > + - fsl,imx8ulp-cgc1 > + - fsl,imx8ulp-cgc2 > + - fsl,imx8ulp-pcc3 > + - fsl,imx8ulp-pcc4 > + - fsl,imx8ulp-pcc5 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: > + specify the external clocks used by the CGC module, the clocks > + are rosc, sosc, frosc, lposc > + maxItems: 4 > + > + clock-names: > + description: > + specify the external clocks names used by the CGC module. the valid > + clock names should rosc, sosc, frosc, lposc. > + maxItems: 4 > + > + '#clock-cells': > + const: 1 > + description: > + The clock consumer should specify the desired clock by having the clock > + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8ulp-clock.h > + for the full list of i.MX8ULP clock IDs. > + > +required: > + - compatible > + - reg > + - '#clock-cells' > + > +additionalProperties: false > + > +examples: > + # Clock Control Module node: > + - | > + clock-controller@292c0000 { > + compatible = "fsl,imx8ulp-cgc1"; > + reg = <0x292c0000 0x10000>; > + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; > + clock-names = "rosc", "sosc", "frosc", "lposc"; > + #clock-cells = <1>; > + }; > + > + - | > + clock-controller@292d0000 { > + compatible = "fsl,imx8ulp-pcc3"; > + reg = <0x292d0000 0x10000>; > + #clock-cells = <1>; > + }; > diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h > new file mode 100644 > index 000000000000..61518775f434 > --- /dev/null > +++ b/include/dt-bindings/clock/imx8ulp-clock.h > @@ -0,0 +1,261 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ Dual license please. > +/* > + * Copyright 2021 NXP > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H > +#define __DT_BINDINGS_CLOCK_IMX8ULP_H > + > +#define IMX8ULP_CLK_DUMMY 0 > +#define IMX8ULP_CLK_ROSC 1 > +#define IMX8ULP_CLK_FROSC 2 > +#define IMX8ULP_CLK_LPOSC 3 > +#define IMX8ULP_CLK_SOSC 4 > + > +/* CGC1 */ > +#define IMX8ULP_CLK_SPLL2 5 > +#define IMX8ULP_CLK_SPLL3 6 > +#define IMX8ULP_CLK_A35_SEL 7 > +#define IMX8ULP_CLK_A35_DIV 8 > +#define IMX8ULP_CLK_SPLL2_PRE_SEL 9 > +#define IMX8ULP_CLK_SPLL3_PRE_SEL 10 > +#define IMX8ULP_CLK_SPLL3_PFD0 11 > +#define IMX8ULP_CLK_SPLL3_PFD1 12 > +#define IMX8ULP_CLK_SPLL3_PFD2 13 > +#define IMX8ULP_CLK_SPLL3_PFD3 14 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1 15 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2 16 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1 17 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2 18 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1 19 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2 20 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1 21 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2 22 > +#define IMX8ULP_CLK_NIC_SEL 23 > +#define IMX8ULP_CLK_NIC_AD_DIVPLAT 24 > +#define IMX8ULP_CLK_NIC_PER_DIVPLAT 25 > +#define IMX8ULP_CLK_XBAR_SEL 26 > +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT 27 > +#define IMX8ULP_CLK_XBAR_DIVBUS 28 > +#define IMX8ULP_CLK_XBAR_AD_SLOW 29 > +#define IMX8ULP_CLK_SOSC_DIV1 30 > +#define IMX8ULP_CLK_SOSC_DIV2 31 > +#define IMX8ULP_CLK_SOSC_DIV3 32 > +#define IMX8ULP_CLK_FROSC_DIV1 33 > +#define IMX8ULP_CLK_FROSC_DIV2 34 > +#define IMX8ULP_CLK_FROSC_DIV3 35 > +#define IMX8ULP_CLK_SPLL3_VCODIV 36 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE 37 > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE 38 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE 39 > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE 40 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE 41 > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE 42 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE 43 > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE 44 > +#define IMX8ULP_CLK_SOSC_DIV1_GATE 45 > +#define IMX8ULP_CLK_SOSC_DIV2_GATE 46 > +#define IMX8ULP_CLK_SOSC_DIV3_GATE 47 > +#define IMX8ULP_CLK_FROSC_DIV1_GATE 48 > +#define IMX8ULP_CLK_FROSC_DIV2_GATE 49 > +#define IMX8ULP_CLK_FROSC_DIV3_GATE 50 > +#define IMX8ULP_CLK_SAI4_SEL 51 > +#define IMX8ULP_CLK_SAI5_SEL 52 > +#define IMX8ULP_CLK_AUD_CLK1 53 > +#define IMX8ULP_CLK_ARM 54 > +#define IMX8ULP_CLK_ENET_TS_SEL 55 > + > +#define IMX8ULP_CLK_CGC1_END 56 > + > +/* CGC2 */ > +#define IMX8ULP_CLK_PLL4_PRE_SEL 0 > +#define IMX8ULP_CLK_PLL4 1 > +#define IMX8ULP_CLK_PLL4_VCODIV 2 > +#define IMX8ULP_CLK_DDR_SEL 3 > +#define IMX8ULP_CLK_DDR_DIV 4 > +#define IMX8ULP_CLK_LPAV_AXI_SEL 5 > +#define IMX8ULP_CLK_LPAV_AXI_DIV 6 > +#define IMX8ULP_CLK_LPAV_AHB_DIV 7 > +#define IMX8ULP_CLK_LPAV_BUS_DIV 8 > +#define IMX8ULP_CLK_PLL4_PFD0 9 > +#define IMX8ULP_CLK_PLL4_PFD1 10 > +#define IMX8ULP_CLK_PLL4_PFD2 11 > +#define IMX8ULP_CLK_PLL4_PFD3 12 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE 13 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE 14 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE 15 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE 16 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE 17 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE 18 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE 19 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE 20 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1 21 > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2 22 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1 23 > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2 24 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1 25 > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2 26 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1 27 > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2 28 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE 29 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE 30 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE 31 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1 32 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2 33 > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3 34 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE 35 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE 36 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE 37 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1 38 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2 39 > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3 40 > +#define IMX8ULP_CLK_AUD_CLK2 41 > +#define IMX8ULP_CLK_SAI6_SEL 42 > +#define IMX8ULP_CLK_SAI7_SEL 43 > +#define IMX8ULP_CLK_SPDIF_SEL 44 > +#define IMX8ULP_CLK_HIFI_SEL 45 > +#define IMX8ULP_CLK_HIFI_DIVCORE 46 > +#define IMX8ULP_CLK_HIFI_DIVPLAT 47 > +#define IMX8ULP_CLK_DSI_PHY_REF 48 > + > +#define IMX8ULP_CLK_CGC2_END 49 > + > +/* PCC3 */ > +#define IMX8ULP_CLK_WDOG3 0 > +#define IMX8ULP_CLK_WDOG4 1 > +#define IMX8ULP_CLK_LPIT1 2 > +#define IMX8ULP_CLK_TPM4 3 > +#define IMX8ULP_CLK_TPM5 4 > +#define IMX8ULP_CLK_FLEXIO1 5 > +#define IMX8ULP_CLK_I3C2 6 > +#define IMX8ULP_CLK_LPI2C4 7 > +#define IMX8ULP_CLK_LPI2C5 8 > +#define IMX8ULP_CLK_LPUART4 9 > +#define IMX8ULP_CLK_LPUART5 10 > +#define IMX8ULP_CLK_LPSPI4 11 > +#define IMX8ULP_CLK_LPSPI5 12 > +#define IMX8ULP_CLK_DMA1_MP 13 > +#define IMX8ULP_CLK_DMA1_CH0 14 > +#define IMX8ULP_CLK_DMA1_CH1 15 > +#define IMX8ULP_CLK_DMA1_CH2 16 > +#define IMX8ULP_CLK_DMA1_CH3 17 > +#define IMX8ULP_CLK_DMA1_CH4 18 > +#define IMX8ULP_CLK_DMA1_CH5 19 > +#define IMX8ULP_CLK_DMA1_CH6 20 > +#define IMX8ULP_CLK_DMA1_CH7 21 > +#define IMX8ULP_CLK_DMA1_CH8 22 > +#define IMX8ULP_CLK_DMA1_CH9 23 > +#define IMX8ULP_CLK_DMA1_CH10 24 > +#define IMX8ULP_CLK_DMA1_CH11 25 > +#define IMX8ULP_CLK_DMA1_CH12 26 > +#define IMX8ULP_CLK_DMA1_CH13 27 > +#define IMX8ULP_CLK_DMA1_CH14 28 > +#define IMX8ULP_CLK_DMA1_CH15 29 > +#define IMX8ULP_CLK_DMA1_CH16 30 > +#define IMX8ULP_CLK_DMA1_CH17 31 > +#define IMX8ULP_CLK_DMA1_CH18 32 > +#define IMX8ULP_CLK_DMA1_CH19 33 > +#define IMX8ULP_CLK_DMA1_CH20 34 > +#define IMX8ULP_CLK_DMA1_CH21 35 > +#define IMX8ULP_CLK_DMA1_CH22 36 > +#define IMX8ULP_CLK_DMA1_CH23 37 > +#define IMX8ULP_CLK_DMA1_CH24 38 > +#define IMX8ULP_CLK_DMA1_CH25 39 > +#define IMX8ULP_CLK_DMA1_CH26 40 > +#define IMX8ULP_CLK_DMA1_CH27 41 > +#define IMX8ULP_CLK_DMA1_CH28 42 > +#define IMX8ULP_CLK_DMA1_CH29 43 > +#define IMX8ULP_CLK_DMA1_CH30 44 > +#define IMX8ULP_CLK_DMA1_CH31 45 > +#define IMX8ULP_CLK_MU3_A 46 > + > +#define IMX8ULP_CLK_PCC3_END 47 > + > +/* PCC4 */ > +#define IMX8ULP_CLK_FLEXSPI2 0 > +#define IMX8ULP_CLK_TPM6 1 > +#define IMX8ULP_CLK_TPM7 2 > +#define IMX8ULP_CLK_LPI2C6 3 > +#define IMX8ULP_CLK_LPI2C7 4 > +#define IMX8ULP_CLK_LPUART6 5 > +#define IMX8ULP_CLK_LPUART7 6 > +#define IMX8ULP_CLK_SAI4 7 > +#define IMX8ULP_CLK_SAI5 8 > +#define IMX8ULP_CLK_PCTLE 9 > +#define IMX8ULP_CLK_PCTLF 10 > +#define IMX8ULP_CLK_USDHC0 11 > +#define IMX8ULP_CLK_USDHC1 12 > +#define IMX8ULP_CLK_USDHC2 13 > +#define IMX8ULP_CLK_USB0 14 > +#define IMX8ULP_CLK_USB0_PHY 15 > +#define IMX8ULP_CLK_USB1 16 > +#define IMX8ULP_CLK_USB1_PHY 17 > +#define IMX8ULP_CLK_USB_XBAR 18 > +#define IMX8ULP_CLK_ENET 19 > +#define IMX8ULP_CLK_SFA1 20 > +#define IMX8ULP_CLK_RGPIOE 21 > +#define IMX8ULP_CLK_RGPIOF 22 > + > +#define IMX8ULP_CLK_PCC4_END 23 > + > +/* PCC5 */ > +#define IMX8ULP_CLK_TPM8 0 > +#define IMX8ULP_CLK_SAI6 1 > +#define IMX8ULP_CLK_SAI7 2 > +#define IMX8ULP_CLK_SPDIF 3 > +#define IMX8ULP_CLK_ISI 4 > +#define IMX8ULP_CLK_CSI_REGS 5 > +#define IMX8ULP_CLK_PCTLD 6 > +#define IMX8ULP_CLK_CSI 7 > +#define IMX8ULP_CLK_DSI 8 > +#define IMX8ULP_CLK_WDOG5 9 > +#define IMX8ULP_CLK_EPDC 10 > +#define IMX8ULP_CLK_PXP 11 > +#define IMX8ULP_CLK_SFA2 12 > +#define IMX8ULP_CLK_GPU2D 13 > +#define IMX8ULP_CLK_GPU3D 14 > +#define IMX8ULP_CLK_DC_NANO 15 > +#define IMX8ULP_CLK_CSI_CLK_UI 16 > +#define IMX8ULP_CLK_CSI_CLK_ESC 17 > +#define IMX8ULP_CLK_RGPIOD 18 > +#define IMX8ULP_CLK_DMA2_MP 19 > +#define IMX8ULP_CLK_DMA2_CH0 20 > +#define IMX8ULP_CLK_DMA2_CH1 21 > +#define IMX8ULP_CLK_DMA2_CH2 22 > +#define IMX8ULP_CLK_DMA2_CH3 23 > +#define IMX8ULP_CLK_DMA2_CH4 24 > +#define IMX8ULP_CLK_DMA2_CH5 25 > +#define IMX8ULP_CLK_DMA2_CH6 26 > +#define IMX8ULP_CLK_DMA2_CH7 27 > +#define IMX8ULP_CLK_DMA2_CH8 28 > +#define IMX8ULP_CLK_DMA2_CH9 29 > +#define IMX8ULP_CLK_DMA2_CH10 30 > +#define IMX8ULP_CLK_DMA2_CH11 31 > +#define IMX8ULP_CLK_DMA2_CH12 32 > +#define IMX8ULP_CLK_DMA2_CH13 33 > +#define IMX8ULP_CLK_DMA2_CH14 34 > +#define IMX8ULP_CLK_DMA2_CH15 35 > +#define IMX8ULP_CLK_DMA2_CH16 36 > +#define IMX8ULP_CLK_DMA2_CH17 37 > +#define IMX8ULP_CLK_DMA2_CH18 38 > +#define IMX8ULP_CLK_DMA2_CH19 39 > +#define IMX8ULP_CLK_DMA2_CH20 40 > +#define IMX8ULP_CLK_DMA2_CH21 41 > +#define IMX8ULP_CLK_DMA2_CH22 42 > +#define IMX8ULP_CLK_DMA2_CH23 43 > +#define IMX8ULP_CLK_DMA2_CH24 44 > +#define IMX8ULP_CLK_DMA2_CH25 45 > +#define IMX8ULP_CLK_DMA2_CH26 46 > +#define IMX8ULP_CLK_DMA2_CH27 47 > +#define IMX8ULP_CLK_DMA2_CH28 48 > +#define IMX8ULP_CLK_DMA2_CH29 49 > +#define IMX8ULP_CLK_DMA2_CH30 50 > +#define IMX8ULP_CLK_DMA2_CH31 51 > +#define IMX8ULP_CLK_MU2_B 52 > +#define IMX8ULP_CLK_MU3_B 53 > +#define IMX8ULP_CLK_AVD_SIM 54 > +#define IMX8ULP_CLK_DSI_TX_ESC 55 > + > +#define IMX8ULP_CLK_PCC5_END 56 > + > +#endif > -- > 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support 2021-06-16 23:47 ` Rob Herring @ 2021-06-17 9:09 ` Jacky Bai 0 siblings, 0 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-17 9:09 UTC (permalink / raw) To: Rob Herring Cc: shawnguo, sboyd, s.hauer, linus.walleij, Aisheng Dong, festevam, kernel, dl-linux-imx, devicetree, linux-arm-kernel > Subject: Re: [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support > > On Mon, Jun 07, 2021 at 04:39:19PM +0800, Jacky Bai wrote: > > Add the clock dt-binding file for i.MX8ULP. > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > --- > > .../bindings/clock/imx8ulp-clock.yaml | 72 +++++ > > include/dt-bindings/clock/imx8ulp-clock.h | 261 > ++++++++++++++++++ > > 2 files changed, 333 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > > create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h > > > > diff --git > > a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > > b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > > new file mode 100644 > > index 000000000000..ffe7b713d4e7 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml > > @@ -0,0 +1,72 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > Dual license new bindings. Ok, will fix it. BR ... > > + > > +title: NXP i.MX8ULP Clock Control Module Binding > > + > > +maintainers: > > + - Jacky Bai <ping.bai@nxp.com> > > + > > +description: | > > + On i.MX8ULP, The clock sources generation, distribution and > > +management is > > + under the control of several CGCs & PCCs modules. The CGC modules > > +generate > > + and distribute clocks on the device. PCC modules control clock > > +selection, > > + optional division and clock gating mode for peripherals > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8ulp-cgc1 > > + - fsl,imx8ulp-cgc2 > > + - fsl,imx8ulp-pcc3 > > + - fsl,imx8ulp-pcc4 > > + - fsl,imx8ulp-pcc5 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + description: > > + specify the external clocks used by the CGC module, the clocks > > + are rosc, sosc, frosc, lposc > > + maxItems: 4 > > + > > + clock-names: > > + description: > > + specify the external clocks names used by the CGC module. the > valid > > + clock names should rosc, sosc, frosc, lposc. > > + maxItems: 4 > > + > > + '#clock-cells': > > + const: 1 > > + description: > > + The clock consumer should specify the desired clock by having the > clock > > + ID in its "clocks" phandle cell. See > include/dt-bindings/clock/imx8ulp-clock.h > > + for the full list of i.MX8ULP clock IDs. > > + > > +required: > > + - compatible > > + - reg > > + - '#clock-cells' > > + > > +additionalProperties: false > > + > > +examples: > > + # Clock Control Module node: > > + - | > > + clock-controller@292c0000 { > > + compatible = "fsl,imx8ulp-cgc1"; > > + reg = <0x292c0000 0x10000>; > > + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; > > + clock-names = "rosc", "sosc", "frosc", "lposc"; > > + #clock-cells = <1>; > > + }; > > + > > + - | > > + clock-controller@292d0000 { > > + compatible = "fsl,imx8ulp-pcc3"; > > + reg = <0x292d0000 0x10000>; > > + #clock-cells = <1>; > > + }; > > diff --git a/include/dt-bindings/clock/imx8ulp-clock.h > > b/include/dt-bindings/clock/imx8ulp-clock.h > > new file mode 100644 > > index 000000000000..61518775f434 > > --- /dev/null > > +++ b/include/dt-bindings/clock/imx8ulp-clock.h > > @@ -0,0 +1,261 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > Dual license please. Ok, will fix it. BR Jacky Bai > > > +/* > > + * Copyright 2021 NXP > > + */ > > + > > +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H #define > > +__DT_BINDINGS_CLOCK_IMX8ULP_H > > + > > +#define IMX8ULP_CLK_DUMMY 0 > > +#define IMX8ULP_CLK_ROSC 1 > > +#define IMX8ULP_CLK_FROSC 2 > > +#define IMX8ULP_CLK_LPOSC 3 > > +#define IMX8ULP_CLK_SOSC 4 > > + > > +/* CGC1 */ > > +#define IMX8ULP_CLK_SPLL2 5 > > +#define IMX8ULP_CLK_SPLL3 6 > > +#define IMX8ULP_CLK_A35_SEL 7 > > +#define IMX8ULP_CLK_A35_DIV 8 > > +#define IMX8ULP_CLK_SPLL2_PRE_SEL 9 > > +#define IMX8ULP_CLK_SPLL3_PRE_SEL 10 > > +#define IMX8ULP_CLK_SPLL3_PFD0 11 > > +#define IMX8ULP_CLK_SPLL3_PFD1 12 > > +#define IMX8ULP_CLK_SPLL3_PFD2 13 > > +#define IMX8ULP_CLK_SPLL3_PFD3 14 > > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1 15 > > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2 16 > > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1 17 > > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2 18 > > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1 19 > > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2 20 > > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1 21 > > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2 22 > > +#define IMX8ULP_CLK_NIC_SEL 23 > > +#define IMX8ULP_CLK_NIC_AD_DIVPLAT 24 > > +#define IMX8ULP_CLK_NIC_PER_DIVPLAT 25 > > +#define IMX8ULP_CLK_XBAR_SEL 26 > > +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT 27 > > +#define IMX8ULP_CLK_XBAR_DIVBUS 28 > > +#define IMX8ULP_CLK_XBAR_AD_SLOW 29 > > +#define IMX8ULP_CLK_SOSC_DIV1 30 > > +#define IMX8ULP_CLK_SOSC_DIV2 31 > > +#define IMX8ULP_CLK_SOSC_DIV3 32 > > +#define IMX8ULP_CLK_FROSC_DIV1 33 > > +#define IMX8ULP_CLK_FROSC_DIV2 34 > > +#define IMX8ULP_CLK_FROSC_DIV3 35 > > +#define IMX8ULP_CLK_SPLL3_VCODIV 36 > > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE 37 > > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE 38 > > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE 39 > > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE 40 > > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE 41 > > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE 42 > > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE 43 > > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE 44 > > +#define IMX8ULP_CLK_SOSC_DIV1_GATE 45 > > +#define IMX8ULP_CLK_SOSC_DIV2_GATE 46 > > +#define IMX8ULP_CLK_SOSC_DIV3_GATE 47 > > +#define IMX8ULP_CLK_FROSC_DIV1_GATE 48 > > +#define IMX8ULP_CLK_FROSC_DIV2_GATE 49 > > +#define IMX8ULP_CLK_FROSC_DIV3_GATE 50 > > +#define IMX8ULP_CLK_SAI4_SEL 51 > > +#define IMX8ULP_CLK_SAI5_SEL 52 > > +#define IMX8ULP_CLK_AUD_CLK1 53 > > +#define IMX8ULP_CLK_ARM 54 > > +#define IMX8ULP_CLK_ENET_TS_SEL 55 > > + > > +#define IMX8ULP_CLK_CGC1_END 56 > > + > > +/* CGC2 */ > > +#define IMX8ULP_CLK_PLL4_PRE_SEL 0 > > +#define IMX8ULP_CLK_PLL4 1 > > +#define IMX8ULP_CLK_PLL4_VCODIV 2 > > +#define IMX8ULP_CLK_DDR_SEL 3 > > +#define IMX8ULP_CLK_DDR_DIV 4 > > +#define IMX8ULP_CLK_LPAV_AXI_SEL 5 > > +#define IMX8ULP_CLK_LPAV_AXI_DIV 6 > > +#define IMX8ULP_CLK_LPAV_AHB_DIV 7 > > +#define IMX8ULP_CLK_LPAV_BUS_DIV 8 > > +#define IMX8ULP_CLK_PLL4_PFD0 9 > > +#define IMX8ULP_CLK_PLL4_PFD1 10 > > +#define IMX8ULP_CLK_PLL4_PFD2 11 > > +#define IMX8ULP_CLK_PLL4_PFD3 12 > > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE 13 > > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE 14 > > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE 15 > > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE 16 > > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE 17 > > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE 18 > > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE 19 > > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE 20 > > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1 21 > > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2 22 > > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1 23 > > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2 24 > > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1 25 > > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2 26 > > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1 27 > > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2 28 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE 29 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE 30 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE 31 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1 32 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2 33 > > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3 34 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE 35 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE 36 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE 37 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1 38 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2 39 > > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3 40 > > +#define IMX8ULP_CLK_AUD_CLK2 41 > > +#define IMX8ULP_CLK_SAI6_SEL 42 > > +#define IMX8ULP_CLK_SAI7_SEL 43 > > +#define IMX8ULP_CLK_SPDIF_SEL 44 > > +#define IMX8ULP_CLK_HIFI_SEL 45 > > +#define IMX8ULP_CLK_HIFI_DIVCORE 46 > > +#define IMX8ULP_CLK_HIFI_DIVPLAT 47 > > +#define IMX8ULP_CLK_DSI_PHY_REF 48 > > + > > +#define IMX8ULP_CLK_CGC2_END 49 > > + > > +/* PCC3 */ > > +#define IMX8ULP_CLK_WDOG3 0 > > +#define IMX8ULP_CLK_WDOG4 1 > > +#define IMX8ULP_CLK_LPIT1 2 > > +#define IMX8ULP_CLK_TPM4 3 > > +#define IMX8ULP_CLK_TPM5 4 > > +#define IMX8ULP_CLK_FLEXIO1 5 > > +#define IMX8ULP_CLK_I3C2 6 > > +#define IMX8ULP_CLK_LPI2C4 7 > > +#define IMX8ULP_CLK_LPI2C5 8 > > +#define IMX8ULP_CLK_LPUART4 9 > > +#define IMX8ULP_CLK_LPUART5 10 > > +#define IMX8ULP_CLK_LPSPI4 11 > > +#define IMX8ULP_CLK_LPSPI5 12 > > +#define IMX8ULP_CLK_DMA1_MP 13 > > +#define IMX8ULP_CLK_DMA1_CH0 14 > > +#define IMX8ULP_CLK_DMA1_CH1 15 > > +#define IMX8ULP_CLK_DMA1_CH2 16 > > +#define IMX8ULP_CLK_DMA1_CH3 17 > > +#define IMX8ULP_CLK_DMA1_CH4 18 > > +#define IMX8ULP_CLK_DMA1_CH5 19 > > +#define IMX8ULP_CLK_DMA1_CH6 20 > > +#define IMX8ULP_CLK_DMA1_CH7 21 > > +#define IMX8ULP_CLK_DMA1_CH8 22 > > +#define IMX8ULP_CLK_DMA1_CH9 23 > > +#define IMX8ULP_CLK_DMA1_CH10 24 > > +#define IMX8ULP_CLK_DMA1_CH11 25 > > +#define IMX8ULP_CLK_DMA1_CH12 26 > > +#define IMX8ULP_CLK_DMA1_CH13 27 > > +#define IMX8ULP_CLK_DMA1_CH14 28 > > +#define IMX8ULP_CLK_DMA1_CH15 29 > > +#define IMX8ULP_CLK_DMA1_CH16 30 > > +#define IMX8ULP_CLK_DMA1_CH17 31 > > +#define IMX8ULP_CLK_DMA1_CH18 32 > > +#define IMX8ULP_CLK_DMA1_CH19 33 > > +#define IMX8ULP_CLK_DMA1_CH20 34 > > +#define IMX8ULP_CLK_DMA1_CH21 35 > > +#define IMX8ULP_CLK_DMA1_CH22 36 > > +#define IMX8ULP_CLK_DMA1_CH23 37 > > +#define IMX8ULP_CLK_DMA1_CH24 38 > > +#define IMX8ULP_CLK_DMA1_CH25 39 > > +#define IMX8ULP_CLK_DMA1_CH26 40 > > +#define IMX8ULP_CLK_DMA1_CH27 41 > > +#define IMX8ULP_CLK_DMA1_CH28 42 > > +#define IMX8ULP_CLK_DMA1_CH29 43 > > +#define IMX8ULP_CLK_DMA1_CH30 44 > > +#define IMX8ULP_CLK_DMA1_CH31 45 > > +#define IMX8ULP_CLK_MU3_A 46 > > + > > +#define IMX8ULP_CLK_PCC3_END 47 > > + > > +/* PCC4 */ > > +#define IMX8ULP_CLK_FLEXSPI2 0 > > +#define IMX8ULP_CLK_TPM6 1 > > +#define IMX8ULP_CLK_TPM7 2 > > +#define IMX8ULP_CLK_LPI2C6 3 > > +#define IMX8ULP_CLK_LPI2C7 4 > > +#define IMX8ULP_CLK_LPUART6 5 > > +#define IMX8ULP_CLK_LPUART7 6 > > +#define IMX8ULP_CLK_SAI4 7 > > +#define IMX8ULP_CLK_SAI5 8 > > +#define IMX8ULP_CLK_PCTLE 9 > > +#define IMX8ULP_CLK_PCTLF 10 > > +#define IMX8ULP_CLK_USDHC0 11 > > +#define IMX8ULP_CLK_USDHC1 12 > > +#define IMX8ULP_CLK_USDHC2 13 > > +#define IMX8ULP_CLK_USB0 14 > > +#define IMX8ULP_CLK_USB0_PHY 15 > > +#define IMX8ULP_CLK_USB1 16 > > +#define IMX8ULP_CLK_USB1_PHY 17 > > +#define IMX8ULP_CLK_USB_XBAR 18 > > +#define IMX8ULP_CLK_ENET 19 > > +#define IMX8ULP_CLK_SFA1 20 > > +#define IMX8ULP_CLK_RGPIOE 21 > > +#define IMX8ULP_CLK_RGPIOF 22 > > + > > +#define IMX8ULP_CLK_PCC4_END 23 > > + > > +/* PCC5 */ > > +#define IMX8ULP_CLK_TPM8 0 > > +#define IMX8ULP_CLK_SAI6 1 > > +#define IMX8ULP_CLK_SAI7 2 > > +#define IMX8ULP_CLK_SPDIF 3 > > +#define IMX8ULP_CLK_ISI 4 > > +#define IMX8ULP_CLK_CSI_REGS 5 > > +#define IMX8ULP_CLK_PCTLD 6 > > +#define IMX8ULP_CLK_CSI 7 > > +#define IMX8ULP_CLK_DSI 8 > > +#define IMX8ULP_CLK_WDOG5 9 > > +#define IMX8ULP_CLK_EPDC 10 > > +#define IMX8ULP_CLK_PXP 11 > > +#define IMX8ULP_CLK_SFA2 12 > > +#define IMX8ULP_CLK_GPU2D 13 > > +#define IMX8ULP_CLK_GPU3D 14 > > +#define IMX8ULP_CLK_DC_NANO 15 > > +#define IMX8ULP_CLK_CSI_CLK_UI 16 > > +#define IMX8ULP_CLK_CSI_CLK_ESC 17 > > +#define IMX8ULP_CLK_RGPIOD 18 > > +#define IMX8ULP_CLK_DMA2_MP 19 > > +#define IMX8ULP_CLK_DMA2_CH0 20 > > +#define IMX8ULP_CLK_DMA2_CH1 21 > > +#define IMX8ULP_CLK_DMA2_CH2 22 > > +#define IMX8ULP_CLK_DMA2_CH3 23 > > +#define IMX8ULP_CLK_DMA2_CH4 24 > > +#define IMX8ULP_CLK_DMA2_CH5 25 > > +#define IMX8ULP_CLK_DMA2_CH6 26 > > +#define IMX8ULP_CLK_DMA2_CH7 27 > > +#define IMX8ULP_CLK_DMA2_CH8 28 > > +#define IMX8ULP_CLK_DMA2_CH9 29 > > +#define IMX8ULP_CLK_DMA2_CH10 30 > > +#define IMX8ULP_CLK_DMA2_CH11 31 > > +#define IMX8ULP_CLK_DMA2_CH12 32 > > +#define IMX8ULP_CLK_DMA2_CH13 33 > > +#define IMX8ULP_CLK_DMA2_CH14 34 > > +#define IMX8ULP_CLK_DMA2_CH15 35 > > +#define IMX8ULP_CLK_DMA2_CH16 36 > > +#define IMX8ULP_CLK_DMA2_CH17 37 > > +#define IMX8ULP_CLK_DMA2_CH18 38 > > +#define IMX8ULP_CLK_DMA2_CH19 39 > > +#define IMX8ULP_CLK_DMA2_CH20 40 > > +#define IMX8ULP_CLK_DMA2_CH21 41 > > +#define IMX8ULP_CLK_DMA2_CH22 42 > > +#define IMX8ULP_CLK_DMA2_CH23 43 > > +#define IMX8ULP_CLK_DMA2_CH24 44 > > +#define IMX8ULP_CLK_DMA2_CH25 45 > > +#define IMX8ULP_CLK_DMA2_CH26 46 > > +#define IMX8ULP_CLK_DMA2_CH27 47 > > +#define IMX8ULP_CLK_DMA2_CH28 48 > > +#define IMX8ULP_CLK_DMA2_CH29 49 > > +#define IMX8ULP_CLK_DMA2_CH30 50 > > +#define IMX8ULP_CLK_DMA2_CH31 51 > > +#define IMX8ULP_CLK_MU2_B 52 > > +#define IMX8ULP_CLK_MU3_B 53 > > +#define IMX8ULP_CLK_AVD_SIM 54 > > +#define IMX8ULP_CLK_DSI_TX_ESC 55 > > + > > +#define IMX8ULP_CLK_PCC5_END 56 > > + > > +#endif > > -- > > 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai ` (8 preceding siblings ...) 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai @ 2021-06-07 8:39 ` Jacky Bai 2021-06-11 14:43 ` Dong Aisheng [not found] ` <20210607083921.2668568-11-ping.bai@nxp.com> 10 siblings, 1 reply; 36+ messages in thread From: Jacky Bai @ 2021-06-07 8:39 UTC (permalink / raw) To: robh+dt, shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong Cc: festevam, kernel, linux-imx, devicetree, linux-arm-kernel Add the basic dts file for i.MX8ULP EVK board. Only the necessary devices for minimal system boot up are enabled: enet, emmc, usb, console uart. some of the devices' pin status may lost during low power mode, so additional sleep pinctrl properties are included by default. Signed-off-by: Jacky Bai <ping.bai@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 143 ++++++++++++++++++ 2 files changed, 144 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 25806c4924cb..8c24a05d55af 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -65,5 +65,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts new file mode 100644 index 000000000000..f4db04f357fe --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + */ + +/dts-v1/; + +#include "imx8ulp.dtsi" + +/ { + model = "NXP i.MX8ULP EVK"; + compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp"; + + chosen { + stdout-path = &lpuart5; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy { + reg = <1>; + micrel,led-mode = <1>; + }; + }; +}; + +&lpuart5 { + /* console */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpuart5>; + pinctrl-1 = <&pinctrl_lpuart5>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_otgid1>; + pinctrl-1 = <&pinctrl_otgid1>; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_otgid2>; + pinctrl-1 = <&pinctrl_otgid2>; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usbmisc2 { + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc1 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX8ULP_PAD_PTE15__ENET0_MDC 0x43 + MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 + MX8ULP_PAD_PTE17__ENET0_RXER 0x43 + MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 + MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 + MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 + MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 + MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 + MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 + MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 + MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + MX8ULP_PAD_PTF14__LPUART5_TX 0x3 + MX8ULP_PAD_PTF15__LPUART5_RX 0x3 + >; + }; + + pinctrl_otgid1: usb1grp { + fsl,pins = < + MX8ULP_PAD_PTF2__USB0_ID 0x10003 + >; + }; + + pinctrl_otgid2: usb2grp { + fsl,pins = < + MX8ULP_PAD_PTD23__USB1_ID 0x10003 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MX8ULP_PAD_PTD1__SDHC0_CMD 0x43 + MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042 + MX8ULP_PAD_PTD10__SDHC0_D0 0x43 + MX8ULP_PAD_PTD9__SDHC0_D1 0x43 + MX8ULP_PAD_PTD8__SDHC0_D2 0x43 + MX8ULP_PAD_PTD7__SDHC0_D3 0x43 + MX8ULP_PAD_PTD6__SDHC0_D4 0x43 + MX8ULP_PAD_PTD5__SDHC0_D5 0x43 + MX8ULP_PAD_PTD4__SDHC0_D6 0x43 + MX8ULP_PAD_PTD3__SDHC0_D7 0x43 + MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042 + >; + }; +}; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board 2021-06-07 8:39 ` [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Jacky Bai @ 2021-06-11 14:43 ` Dong Aisheng 0 siblings, 0 replies; 36+ messages in thread From: Dong Aisheng @ 2021-06-11 14:43 UTC (permalink / raw) To: Jacky Bai Cc: Rob Herring, Shawn Guo, Stephen Boyd, Sascha Hauer, Linus Walleij, Dong Aisheng, Fabio Estevam, Sascha Hauer, dl-linux-imx, devicetree, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Mon, Jun 7, 2021 at 4:39 PM Jacky Bai <ping.bai@nxp.com> wrote: > > Add the basic dts file for i.MX8ULP EVK board. > Only the necessary devices for minimal system boot up are enabled: > enet, emmc, usb, console uart. > > some of the devices' pin status may lost during low power mode, > so additional sleep pinctrl properties are included by default. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> Mostly looks good > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 143 ++++++++++++++++++ > 2 files changed, 144 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 25806c4924cb..8c24a05d55af 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -65,5 +65,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb > > dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > new file mode 100644 > index 000000000000..f4db04f357fe > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > @@ -0,0 +1,143 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2021 NXP > + */ > + > +/dts-v1/; > + > +#include "imx8ulp.dtsi" > + > +/ { > + model = "NXP i.MX8ULP EVK"; > + compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp"; > + > + chosen { > + stdout-path = &lpuart5; > + }; no memory node? Regards Aisheng > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + phy-handle = <ðphy>; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy: ethernet-phy { > + reg = <1>; > + micrel,led-mode = <1>; > + }; > + }; > +}; > + > +&lpuart5 { > + /* console */ > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_lpuart5>; > + pinctrl-1 = <&pinctrl_lpuart5>; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_otgid1>; > + pinctrl-1 = <&pinctrl_otgid1>; > + dr_mode = "otg"; > + hnp-disable; > + srp-disable; > + adp-disable; > + status = "okay"; > +}; > + > +&usbphy1 { > + status = "okay"; > +}; > + > +&usbmisc1 { > + status = "okay"; > +}; > + > +&usbotg2 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_otgid2>; > + pinctrl-1 = <&pinctrl_otgid2>; > + dr_mode = "otg"; > + hnp-disable; > + srp-disable; > + adp-disable; > + status = "okay"; > +}; > + > +&usbphy2 { > + status = "okay"; > +}; > + > +&usbmisc2 { > + status = "okay"; > +}; > + > +&usdhc0 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_usdhc0>; > + pinctrl-1 = <&pinctrl_usdhc0>; > + non-removable; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&iomuxc1 { > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX8ULP_PAD_PTE15__ENET0_MDC 0x43 > + MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 > + MX8ULP_PAD_PTE17__ENET0_RXER 0x43 > + MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 > + MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 > + MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 > + MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 > + MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 > + MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 > + MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 > + MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 > + >; > + }; > + > + pinctrl_lpuart5: lpuart5grp { > + fsl,pins = < > + MX8ULP_PAD_PTF14__LPUART5_TX 0x3 > + MX8ULP_PAD_PTF15__LPUART5_RX 0x3 > + >; > + }; > + > + pinctrl_otgid1: usb1grp { > + fsl,pins = < > + MX8ULP_PAD_PTF2__USB0_ID 0x10003 > + >; > + }; > + > + pinctrl_otgid2: usb2grp { > + fsl,pins = < > + MX8ULP_PAD_PTD23__USB1_ID 0x10003 > + >; > + }; > + > + pinctrl_usdhc0: usdhc0grp { > + fsl,pins = < > + MX8ULP_PAD_PTD1__SDHC0_CMD 0x43 > + MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042 > + MX8ULP_PAD_PTD10__SDHC0_D0 0x43 > + MX8ULP_PAD_PTD9__SDHC0_D1 0x43 > + MX8ULP_PAD_PTD8__SDHC0_D2 0x43 > + MX8ULP_PAD_PTD7__SDHC0_D3 0x43 > + MX8ULP_PAD_PTD6__SDHC0_D4 0x43 > + MX8ULP_PAD_PTD5__SDHC0_D5 0x43 > + MX8ULP_PAD_PTD4__SDHC0_D6 0x43 > + MX8ULP_PAD_PTD3__SDHC0_D7 0x43 > + MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042 > + >; > + }; > +}; > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
[parent not found: <20210607083921.2668568-11-ping.bai@nxp.com>]
* RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp [not found] ` <20210607083921.2668568-11-ping.bai@nxp.com> @ 2021-06-11 14:40 ` Aisheng Dong 2021-06-16 23:51 ` Rob Herring 1 sibling, 0 replies; 36+ messages in thread From: Aisheng Dong @ 2021-06-11 14:40 UTC (permalink / raw) To: Jacky Bai, robh+dt, shawnguo, sboyd, s.hauer, linus.walleij Cc: festevam, kernel, dl-linux-imx, devicetree, linux-arm-kernel > From: Jacky Bai <ping.bai@nxp.com> > Sent: Monday, June 7, 2021 4:39 PM > > i.MX 8ULP is part of the ULP family with emphasis on extreme > low-power techniques using the 28 nm fully depleted silicon on > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be > based on asymmetric architecture, however will add a third DSP > domain for advanced voice/audio capability and a Graphics domain > where it is possible to access graphics resources from the > application side or the realtime side. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> The patch mostly looks good to me. Only a few minor comments. > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > new file mode 100644 > index 000000000000..469c2dcd4636 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > @@ -0,0 +1,474 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2021 NXP > + */ > + > +#include <dt-bindings/clock/imx8ulp-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +#include "imx8ulp-pinfunc.h" > + > +/ { > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + ethernet0 = &fec; > + gpio0 = &gpiod; > + gpio1 = &gpioe; > + gpio2 = &gpiof; > + mmc0 = &usdhc0; > + mmc1 = &usdhc1; > + mmc2 = &usdhc2; > + serial0 = &lpuart4; > + serial1 = &lpuart5; > + serial2 = &lpuart6; > + serial3 = &lpuart7; > + usbphy0 = &usbphy1; > + usbphy1 = &usbphy2; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + A35_0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + next-level-cache = <&A35_L2>; > + }; > + > + A35_L2: l2-cache0 { > + compatible = "cache"; > + }; > + }; > + > + gic: interrupt-controller@2d400000 { > + compatible = "arm,gic-v3"; > + reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */ > + <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) > */ > + #interrupt-cells = <3>; > + interrupt-controller; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure > */ > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical > Non-Secure */ > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ > + }; > + > + frosc: clock-frosc { > + compatible = "fixed-clock"; > + clock-frequency = <192000000>; > + clock-output-names = "frosc"; > + #clock-cells = <0>; > + }; > + > + lposc: clock-lposc { > + compatible = "fixed-clock"; > + clock-frequency = <1000000>; > + clock-output-names = "lposc"; > + #clock-cells = <0>; > + }; > + > + rosc: clock-rosc { > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + clock-output-names = "rosc"; > + #clock-cells = <0>; > + }; > + > + sosc: clock-sosc { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "sosc"; > + #clock-cells = <0>; > + }; > + > + soc@0 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x40000000>; > + > + per_bridge3: bus@29000000 { > + compatible = "simple-bus"; > + reg = <0x29000000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + wdog3: watchdog@292a0000 { > + compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt"; > + reg = <0x292a0000 0x10000>; > + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; > + assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; > + assigned-clocks-parents = <&cgc1 > IMX8ULP_CLK_SOSC_DIV2>; > + timeout-sec = <40>; > + }; > + > + cgc1: clock-controller@292c0000 { > + compatible = "fsl,imx8ulp-cgc1"; > + reg = <0x292c0000 0x10000>; > + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; > + clock-names = "rosc", "sosc", "frosc", "lposc"; > + #clock-cells = <1>; > + }; > + > + pcc3: clock-controller@292d0000 { > + compatible = "fsl,imx8ulp-pcc3"; > + reg = <0x292d0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + tpm5: tpm@29340000 { > + compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm"; > + reg = <0x29340000 0x1000>; > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_TPM5>, > + <&pcc3 IMX8ULP_CLK_TPM5>; > + clock-names = "ipg", "per"; > + status = "disabled"; > + }; > + > + lpi2c4: i2c@29370000 { > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x29370000 0x10000>; > + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>, > + <&pcc3 IMX8ULP_CLK_LPI2C4>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpi2c5: i2c@29380000 { > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x29380000 0x10000>; > + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>, > + <&pcc3 IMX8ULP_CLK_LPI2C5>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpuart4: serial@29390000 { > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x29390000 0x1000>; > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPUART4>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart5: serial@293a0000 { > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x293a0000 0x1000>; > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPUART5>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpspi4: spi@293b0000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; > + reg = <0x293b0000 0x10000>; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>, > + <&pcc3 IMX8ULP_CLK_LPSPI4>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <16000000>; > + status = "disabled"; > + }; > + > + lpspi5: spi@293c0000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; > + reg = <0x293c0000 0x10000>; > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>, > + <&pcc3 IMX8ULP_CLK_LPSPI5>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <16000000>; > + status = "disabled"; > + }; > + }; > + > + per_bridge4: bus@29800000 { > + compatible = "simple-bus"; > + reg = <0x29800000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + pcc4: clock-controller@29800000 { > + compatible = "fsl,imx8ulp-pcc4"; > + reg = <0x29800000 0x10000>; > + #clock-cells = <1>; > + }; > + > + lpi2c6: i2c@29840000 { > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x29840000 0x10000>; > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>, > + <&pcc4 IMX8ULP_CLK_LPI2C6>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpi2c7: i2c@29850000 { > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; > + reg = <0x29850000 0x10000>; > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>, > + <&pcc4 IMX8ULP_CLK_LPI2C7>; > + clock-names = "per", "ipg"; > + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>; > + assigned-clock-parents = <&cgc1 > IMX8ULP_CLK_XBAR_DIVBUS>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpuart6: serial@29860000 { > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x29860000 0x1000>; > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_LPUART6>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart7: serial@29870000 { > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x29870000 0x1000>; > + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_LPUART7>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + iomuxc1: pinctrl@298c0000 { > + compatible = "fsl,imx8ulp-iomuxc1"; > + reg = <0x298c0000 0x10000>; > + }; > + > + usdhc0: mmc@298d0000 { > + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x298d0000 0x10000>; > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, > + <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>, > + <&pcc4 IMX8ULP_CLK_USDHC0>; > + clock-names = "ipg", "ahb", "per"; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + usdhc1: mmc@298e0000 { > + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x298e0000 0x10000>; > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, > + <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, > + <&pcc4 IMX8ULP_CLK_USDHC1>; > + clock-names = "ipg", "ahb", "per"; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + usdhc2: mmc@298f0000 { > + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x298f0000 0x10000>; > + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, > + <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, > + <&pcc4 IMX8ULP_CLK_USDHC2>; > + clock-names = "ipg", "ahb", "per"; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + usbotg1: usb@29900000 { > + compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", > "fsl,imx6ul-usb"; > + reg = <0x29900000 0x200>; > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_USB0>; > + phys = <&usbphy1>; > + fsl,usbmisc = <&usbmisc1 0>; > + ahb-burst-config = <0x0>; > + tx-burst-size-dword = <0x8>; > + rx-burst-size-dword = <0x8>; > + status = "disabled"; > + }; > + > + usbmisc1: usbmisc@29900200 { > + compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", > "fsl,imx7d-usbmisc"; I guess we can drop the oldest one if no special requirement > + #index-cells = <1>; > + reg = <0x29900200 0x200>; > + status = "disabled"; > + }; > + > + usbphy1: usb-phy@29910000 { > + compatible = "fsl,imx7ulp-usbphy", "fsl,imx7ulp-usbphy", > "fsl,imx6ul-usbphy"; Duplicated imx7ulp-usbphy? > + reg = <0x29910000 0x10000>; > + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + usbotg2: usb@29920000 { > + compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", > "fsl,imx6ul-usb"; Ditto Regards Aisheng > + reg = <0x29920000 0x200>; > + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_USB1>; > + phys = <&usbphy2>; > + fsl,usbmisc = <&usbmisc2 0>; > + ahb-burst-config = <0x0>; > + tx-burst-size-dword = <0x8>; > + rx-burst-size-dword = <0x8>; > + status = "disabled"; > + }; > + > + usbmisc2: usbmisc@29920200 { > + compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", > "fsl,imx7d-usbmisc"; > + #index-cells = <1>; > + reg = <0x29920200 0x200>; > + status = "disabled"; > + }; > + > + usbphy2: usb-phy@29930000 { > + compatible = "fsl,imx7ulp-usbphy", "fsl,imx7ulp-usbphy", > "fsl,imx6ul-usbphy"; > + reg = <0x29930000 0x10000>; > + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + fec: ethernet@29950000 { > + compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec"; > + reg = <0x29950000 0x10000>; > + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "int0"; > + clocks = <&pcc4 IMX8ULP_CLK_ENET>, > + <&pcc4 IMX8ULP_CLK_ENET>, > + <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; > + clock-names = "ipg", "ahb", "ptp"; > + assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; > + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC>; > + assigned-clock-rates = <24000000>; > + fsl,num-tx-queues = <1>; > + fsl,num-rx-queues = <1>; > + status = "disabled"; > + }; > + }; > + > + gpioe: gpio@2d000000 { > + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, > + <&pcc4 IMX8ULP_CLK_PCTLE>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 32 24>; > + }; > + > + gpiof: gpio@2d010000 { > + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, > + <&pcc4 IMX8ULP_CLK_PCTLF>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 64 32>; > + }; > + > + per_bridge5: bus@2d800000 { > + compatible = "simple-bus"; > + reg = <0x2d800000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + cgc2: clock-controller@2da60000 { > + compatible = "fsl,imx8ulp-cgc2"; > + reg = <0x2da60000 0x10000>; > + clocks = <&sosc>, <&frosc>; > + clock-names = "sosc", "frosc"; > + #clock-cells = <1>; > + }; > + > + pcc5: clock-controller@2da70000 { > + compatible = "fsl,imx8ulp-pcc5"; > + reg = <0x2da70000 0x10000>; > + #clock-cells = <1>; > + }; > + }; > + > + gpiod: gpio@2e200000 { > + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>, > + <&pcc5 IMX8ULP_CLK_RGPIOD>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 0 24>; > + }; > + }; > +}; > -- > 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp [not found] ` <20210607083921.2668568-11-ping.bai@nxp.com> 2021-06-11 14:40 ` [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Aisheng Dong @ 2021-06-16 23:51 ` Rob Herring 2021-06-17 9:03 ` Jacky Bai 1 sibling, 1 reply; 36+ messages in thread From: Rob Herring @ 2021-06-16 23:51 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, sboyd, s.hauer, linus.walleij, aisheng.dong, festevam, kernel, linux-imx, devicetree, linux-arm-kernel On Mon, Jun 07, 2021 at 04:39:20PM +0800, Jacky Bai wrote: > Add the basic dtsi support for i.MX8ULP. > > i.MX 8ULP is part of the ULP family with emphasis on extreme > low-power techniques using the 28 nm fully depleted silicon on > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be > based on asymmetric architecture, however will add a third DSP > domain for advanced voice/audio capability and a Graphics domain > where it is possible to access graphics resources from the > application side or the realtime side. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > --- > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ > 2 files changed, 1452 insertions(+) > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > new file mode 100755 > index 000000000000..faa702634a38 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > @@ -0,0 +1,978 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > new file mode 100644 > index 000000000000..469c2dcd4636 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > @@ -0,0 +1,474 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) How can I use MIT when GPL only header is included? Dual license the header please. And NXP is good with GPLv3, GPLv4, etc.? > +/* > + * Copyright 2021 NXP > + */ > + > +#include <dt-bindings/clock/imx8ulp-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +#include "imx8ulp-pinfunc.h" _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp 2021-06-16 23:51 ` Rob Herring @ 2021-06-17 9:03 ` Jacky Bai 2021-06-18 1:41 ` Jacky Bai 0 siblings, 1 reply; 36+ messages in thread From: Jacky Bai @ 2021-06-17 9:03 UTC (permalink / raw) To: Rob Herring Cc: shawnguo, sboyd, s.hauer, linus.walleij, Aisheng Dong, festevam, kernel, dl-linux-imx, devicetree, linux-arm-kernel > Subject: Re: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for > imx8ulp > > On Mon, Jun 07, 2021 at 04:39:20PM +0800, Jacky Bai wrote: > > Add the basic dtsi support for i.MX8ULP. > > > > i.MX 8ULP is part of the ULP family with emphasis on extreme low-power > > techniques using the 28 nm fully depleted silicon on insulator > > process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric > > architecture, however will add a third DSP domain for advanced > > voice/audio capability and a Graphics domain where it is possible to > > access graphics resources from the application side or the realtime > > side. > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > --- > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > ++++++++++++++++++ > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ > > 2 files changed, 1452 insertions(+) > > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > new file mode 100755 > > index 000000000000..faa702634a38 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > @@ -0,0 +1,978 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > new file mode 100644 > > index 000000000000..469c2dcd4636 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > @@ -0,0 +1,474 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > How can I use MIT when GPL only header is included? Dual license the header > please. > Ok, will add Dual license in the above file. > And NXP is good with GPLv3, GPLv4, etc.? It seems no file use GPLv3 in latest kernel, I will keep use GPLv2 for now, is it ok? BR Jacky Bai > > > +/* > > + * Copyright 2021 NXP > > + */ > > + > > +#include <dt-bindings/clock/imx8ulp-clock.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +#include "imx8ulp-pinfunc.h" _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp 2021-06-17 9:03 ` Jacky Bai @ 2021-06-18 1:41 ` Jacky Bai 0 siblings, 0 replies; 36+ messages in thread From: Jacky Bai @ 2021-06-18 1:41 UTC (permalink / raw) To: Rob Herring Cc: shawnguo, sboyd, s.hauer, linus.walleij, Aisheng Dong, festevam, kernel, dl-linux-imx, devicetree, linux-arm-kernel > Subject: RE: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for > imx8ulp > > > Subject: Re: [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi > > file for imx8ulp > > > > On Mon, Jun 07, 2021 at 04:39:20PM +0800, Jacky Bai wrote: > > > Add the basic dtsi support for i.MX8ULP. > > > > > > i.MX 8ULP is part of the ULP family with emphasis on extreme > > > low-power techniques using the 28 nm fully depleted silicon on > > > insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based > > > on asymmetric architecture, however will add a third DSP domain for > > > advanced voice/audio capability and a Graphics domain where it is > > > possible to access graphics resources from the application side or > > > the realtime side. > > > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > > --- > > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > > ++++++++++++++++++ > > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ > > > 2 files changed, 1452 insertions(+) create mode 100755 > > > arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > new file mode 100755 > > > index 000000000000..faa702634a38 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > > @@ -0,0 +1,978 @@ > > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > new file mode 100644 > > > index 000000000000..469c2dcd4636 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > @@ -0,0 +1,474 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > How can I use MIT when GPL only header is included? Dual license the > > header please. > > > > Ok, will add Dual license in the above file. > > > And NXP is good with GPLv3, GPLv4, etc.? > > It seems no file use GPLv3 in latest kernel, I will keep use GPLv2 for now, is it > ok? Sorry, Rob, it seems I misunderstand what you mean ^_^. I just checked the NXP license policy, GPLv2 or later is ok. BR Jacky Bai > > BR > Jacky Bai > > > > > +/* > > > + * Copyright 2021 NXP > > > + */ > > > + > > > +#include <dt-bindings/clock/imx8ulp-clock.h> > > > +#include <dt-bindings/gpio/gpio.h> > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > + > > > +#include "imx8ulp-pinfunc.h" _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2021-06-18 1:43 UTC | newest] Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-07 8:39 [PATCH 00/11] Add imx8ulp basic dtsi support Jacky Bai 2021-06-07 8:39 ` [PATCH 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-09 10:56 ` Linus Walleij 2021-06-11 13:45 ` Dong Aisheng 2021-06-16 23:42 ` Rob Herring 2021-06-07 8:39 ` [PATCH 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai 2021-06-11 13:46 ` Dong Aisheng 2021-06-16 23:43 ` Rob Herring 2021-06-07 8:39 ` [PATCH 03/11] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatibe string Jacky Bai 2021-06-11 13:50 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 04/11] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string Jacky Bai 2021-06-11 13:52 ` Dong Aisheng 2021-06-16 23:44 ` Rob Herring 2021-06-07 8:39 ` [PATCH 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai 2021-06-11 13:57 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai 2021-06-11 13:58 ` Dong Aisheng 2021-06-16 23:45 ` Rob Herring 2021-06-07 8:39 ` [PATCH 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai 2021-06-11 13:59 ` Dong Aisheng 2021-06-16 23:46 ` Rob Herring 2021-06-07 8:39 ` [PATCH 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai 2021-06-11 14:17 ` Dong Aisheng 2021-06-16 23:47 ` Rob Herring 2021-06-17 9:09 ` Jacky Bai 2021-06-07 8:39 ` [PATCH 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Jacky Bai 2021-06-11 14:43 ` Dong Aisheng [not found] ` <20210607083921.2668568-11-ping.bai@nxp.com> 2021-06-11 14:40 ` [PATCH 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Aisheng Dong 2021-06-16 23:51 ` Rob Herring 2021-06-17 9:03 ` Jacky Bai 2021-06-18 1:41 ` Jacky Bai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).