From: Lokesh Vutla <lokeshvutla@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Device Tree Mailing List <devicetree@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Sekhar Nori <nsekhar@ti.com>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 1/4] dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
Date: Fri, 4 Sep 2020 12:45:13 +0530 [thread overview]
Message-ID: <f99bb33b-cc6b-6f86-bf54-bbd0ae1a394b@ti.com> (raw)
In-Reply-To: <20200827065144.17683-2-lokeshvutla@ti.com>
Hi Rob,
On 27/08/20 12:21 pm, Lokesh Vutla wrote:
> Convert TI K3 Board/SoC bindings to DT schema format.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Do you have any comments on this patch?
Thanks and regards,
Lokesh
> ---
> .../devicetree/bindings/arm/ti/k3.txt | 26 ----------------
> .../devicetree/bindings/arm/ti/k3.yaml | 31 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 32 insertions(+), 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt
> create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
> deleted file mode 100644
> index 333e7256126a..000000000000
> --- a/Documentation/devicetree/bindings/arm/ti/k3.txt
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -Texas Instruments K3 Multicore SoC architecture device tree bindings
> ---------------------------------------------------------------------
> -
> -Platforms based on Texas Instruments K3 Multicore SoC architecture
> -shall follow the following scheme:
> -
> -SoCs
> -----
> -
> -Each device tree root node must specify which exact SoC in K3 Multicore SoC
> -architecture it uses, using one of the following compatible values:
> -
> -- AM654
> - compatible = "ti,am654";
> -
> -- J721E
> - compatible = "ti,j721e";
> -
> -Boards
> -------
> -
> -In addition, each device tree root node must specify which one or more
> -of the following board-specific compatible values:
> -
> -- AM654 EVM
> - compatible = "ti,am654-evm", "ti,am654";
> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
> new file mode 100644
> index 000000000000..c5e3e4aeda8e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
> @@ -0,0 +1,31 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments K3 Multicore SoC architecture device tree bindings
> +
> +maintainers:
> + - Nishanth Menon <nm@ti.com>
> +
> +description: |
> + Platforms based on Texas Instruments K3 Multicore SoC architecture
> + shall have the following properties.
> +
> +properties:
> + $nodename:
> + const: '/'
> + compatible:
> + oneOf:
> +
> + - description: K3 AM654 SoC
> + items:
> + - enum:
> + - ti,am654-evm
> + - const: ti,am654
> +
> + - description: K3 J721E SoC
> + items:
> + - const: ti,j721e
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3b186ade3597..40d31bb7ecf4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2636,7 +2636,7 @@ M: Tero Kristo <t-kristo@ti.com>
> M: Nishanth Menon <nm@ti.com>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Supported
> -F: Documentation/devicetree/bindings/arm/ti/k3.txt
> +F: Documentation/devicetree/bindings/arm/ti/k3.yaml
> F: arch/arm64/boot/dts/ti/Makefile
> F: arch/arm64/boot/dts/ti/k3-*
> F: include/dt-bindings/pinctrl/k3.h
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-04 7:16 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-27 6:51 [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Lokesh Vutla
2020-08-27 6:51 ` [PATCH v2 1/4] dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema Lokesh Vutla
2020-08-28 0:41 ` Nishanth Menon
2020-08-28 3:14 ` Lokesh Vutla
2020-08-28 3:47 ` Suman Anna
2020-08-28 13:07 ` Nishanth Menon
2020-09-04 11:55 ` Nishanth Menon
2020-09-04 7:15 ` Lokesh Vutla [this message]
2020-08-27 6:51 ` [PATCH v2 2/4] dt-bindings: arm: ti: Add bindings for J7200 SoC Lokesh Vutla
2020-08-27 6:51 ` [PATCH v2 3/4] arm64: dts: ti: Add support " Lokesh Vutla
2020-08-27 17:04 ` Suman Anna
2020-09-08 11:47 ` Nishanth Menon
2020-08-31 9:13 ` Peter Ujfalusi
2020-09-02 3:51 ` Lokesh Vutla
2020-08-27 6:51 ` [PATCH v2 4/4] arm64: dts: ti: Add support for J7200 Common Processor Board Lokesh Vutla
2020-09-08 11:57 ` Nishanth Menon
2020-08-27 9:09 ` [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform Grygorii Strashko
2020-09-07 12:02 ` Lokesh Vutla
2020-09-07 14:14 ` Nishanth Menon
2020-09-07 14:23 ` Lokesh Vutla
2020-09-07 23:48 ` Nishanth Menon
2020-09-08 9:55 ` Tero Kristo
2020-09-08 11:25 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f99bb33b-cc6b-6f86-bf54-bbd0ae1a394b@ti.com \
--to=lokeshvutla@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).