From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: robert.foss@linaro.org, andrey.konovalov@linaro.org,
Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org (open list:QUALCOMM CAMERA SUBSYSTEM
DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 16/17] media: camss: add support for SM8250 camss
Date: Tue, 11 May 2021 14:07:23 -0400 [thread overview]
Message-ID: <20210511180728.23781-17-jonathan@marek.ca> (raw)
In-Reply-To: <20210511180728.23781-1-jonathan@marek.ca>
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID.
CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are
inside the VFE region (between the "top" and "bus" registers), so a
workaround is added to avoid ioremap failure.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
.../media/platform/qcom/camss/camss-csid.c | 22 +-
.../media/platform/qcom/camss/camss-csiphy.c | 8 +-
drivers/media/platform/qcom/camss/camss-vfe.c | 9 +-
.../media/platform/qcom/camss/camss-video.c | 3 +-
drivers/media/platform/qcom/camss/camss.c | 196 ++++++++++++++++--
drivers/media/platform/qcom/camss/camss.h | 1 +
6 files changed, 217 insertions(+), 22 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 528674dea06c..5ba603549a4f 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -560,7 +560,8 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
} else if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660) {
csid->ops = &csid_ops_4_7;
- } else if (camss->version == CAMSS_845) {
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
csid->ops = &csid_ops_170;
} else {
return -EINVAL;
@@ -569,10 +570,21 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
/* Memory */
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
- csid->base = devm_ioremap_resource(dev, r);
- if (IS_ERR(csid->base))
- return PTR_ERR(csid->base);
+ if (camss->version == CAMSS_8250) {
+ /* for titan 480, CSID registers are inside the VFE region,
+ * between the VFE "top" and "bus" registers. this requires
+ * VFE to be initialized before CSID
+ */
+ if (id >= 2) /* VFE/CSID lite */
+ csid->base = camss->vfe[id].base + 0x200;
+ else
+ csid->base = camss->vfe[id].base + 0x1200;
+ } else {
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ csid->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csid->base))
+ return PTR_ERR(csid->base);
+ }
/* Interrupt */
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index f82f1e2aa688..1d10c816acf5 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -582,7 +582,8 @@ int msm_csiphy_subdev_init(struct camss *camss,
csiphy->ops = &csiphy_ops_3ph_1_0;
csiphy->formats = csiphy_formats_8x96;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_8x96);
- } else if (camss->version == CAMSS_845) {
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
csiphy->ops = &csiphy_ops_3ph_1_0;
csiphy->formats = csiphy_formats_sdm845;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
@@ -679,7 +680,10 @@ int msm_csiphy_subdev_init(struct camss *camss,
if (!strcmp(clock->name, "csiphy0_timer") ||
!strcmp(clock->name, "csiphy1_timer") ||
- !strcmp(clock->name, "csiphy2_timer"))
+ !strcmp(clock->name, "csiphy2_timer") ||
+ !strcmp(clock->name, "csiphy3_timer") ||
+ !strcmp(clock->name, "csiphy4_timer") ||
+ !strcmp(clock->name, "csiphy5_timer"))
csiphy->rate_set[i] = true;
if (camss->version == CAMSS_660 &&
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index e7ab2c175ac9..d543048c10a8 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -220,7 +220,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
}
else if (vfe->camss->version == CAMSS_8x96 ||
vfe->camss->version == CAMSS_660 ||
- vfe->camss->version == CAMSS_845)
+ vfe->camss->version == CAMSS_845 ||
+ vfe->camss->version == CAMSS_8250)
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_2X8:
{
@@ -1294,6 +1295,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
case CAMSS_845:
vfe->ops = &vfe_ops_170;
break;
+ case CAMSS_8250:
+ vfe->ops = &vfe_ops_480;
+ break;
default:
return -EINVAL;
}
@@ -1405,7 +1409,8 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
l->formats = formats_rdi_8x96;
l->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
- } else if (camss->version == CAMSS_845) {
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
l->formats = formats_rdi_845;
l->nformats = ARRAY_SIZE(formats_rdi_845);
} else {
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 54e77d30d452..5dc1ddbe6d65 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -1011,7 +1011,8 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
video->formats = formats_rdi_8x96;
video->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
- } else if (video->camss->version == CAMSS_845) {
+ } else if (video->camss->version == CAMSS_845 ||
+ video->camss->version == CAMSS_8250) {
video->formats = formats_rdi_845;
video->nformats = ARRAY_SIZE(formats_rdi_845);
} else {
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index c08d6d6f6f90..463850725f37 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -662,6 +662,162 @@ static const struct resources vfe_res_845[] = {
}
};
+static const struct resources csiphy_res_8250[] = {
+ /* CSIPHY0 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy0", "csiphy0_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" }
+ },
+ /* CSIPHY1 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy1", "csiphy1_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" }
+ },
+ /* CSIPHY2 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy2", "csiphy2_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" }
+ },
+ /* CSIPHY3 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy3", "csiphy3_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" }
+ },
+ /* CSIPHY4 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy4", "csiphy4_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy4" },
+ .interrupt = { "csiphy4" }
+ },
+ /* CSIPHY5 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy5", "csiphy5_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy5" },
+ .interrupt = { "csiphy5" }
+ }
+};
+
+static const struct resources csid_res_8250[] = {
+ /* CSID0 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe0_csid", "vfe0_cphy_rx", "vfe0", "vfe0_areg", "vfe0_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 0 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" }
+ },
+ /* CSID1 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe1_csid", "vfe1_cphy_rx", "vfe1", "vfe1_areg", "vfe1_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 0 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" }
+ },
+ /* CSID2 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx", "vfe_lite", "vfe_lite_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" }
+ },
+ /* CSID3 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx", "vfe_lite", "vfe_lite_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "csid3" },
+ .interrupt = { "csid3" }
+ }
+};
+
+static const struct resources vfe_res_8250[] = {
+ /* VFE0 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe0_ahb", "vfe0_areg", "vfe0", "vfe0_axi", "cam_hf_axi" },
+ .clock_rate = { { 0 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" }
+ },
+ /* VFE1 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe1_ahb", "vfe1_areg", "vfe1", "vfe1_axi", "cam_hf_axi" },
+ .clock_rate = { { 0 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" }
+ },
+ /* VFE2 (lite) */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_ahb", "vfe_lite_axi", "vfe_lite", "cam_hf_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" }
+ },
+
+ /* VFE3 (lite) */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_ahb", "vfe_lite_axi", "vfe_lite", "cam_hf_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" }
+ },
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
@@ -945,6 +1101,12 @@ static int camss_init_subdevices(struct camss *camss)
/* Titan VFEs don't have an ISPIF */
ispif_res = NULL;
vfe_res = vfe_res_845;
+ } else if (camss->version == CAMSS_8250) {
+ csiphy_res = csiphy_res_8250;
+ csid_res = csid_res_8250;
+ /* Titan VFEs don't have an ISPIF */
+ ispif_res = NULL;
+ vfe_res = vfe_res_8250;
} else {
return -EINVAL;
}
@@ -960,6 +1122,17 @@ static int camss_init_subdevices(struct camss *camss)
}
}
+ /* note: SM8250 requires VFE to be initialized before CSID */
+ for (i = 0; i < camss->vfe_num; i++) {
+ ret = msm_vfe_subdev_init(camss, &camss->vfe[i],
+ &vfe_res[i], i);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Fail to init vfe%d sub-device: %d\n", i, ret);
+ return ret;
+ }
+ }
+
for (i = 0; i < camss->csid_num; i++) {
ret = msm_csid_subdev_init(camss, &camss->csid[i],
&csid_res[i], i);
@@ -978,16 +1151,6 @@ static int camss_init_subdevices(struct camss *camss)
return ret;
}
- for (i = 0; i < camss->vfe_num; i++) {
- ret = msm_vfe_subdev_init(camss, &camss->vfe[i],
- &vfe_res[i], i);
- if (ret < 0) {
- dev_err(camss->dev,
- "Fail to init vfe%d sub-device: %d\n", i, ret);
- return ret;
- }
- }
-
return 0;
}
@@ -1250,7 +1413,8 @@ static int camss_configure_pd(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_GEN1_COUNT;
- else if (camss->version == CAMSS_845)
+ else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250)
nbr_pm_domains = PM_DOMAIN_GEN2_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
@@ -1326,6 +1490,12 @@ static int camss_probe(struct platform_device *pdev)
camss->csiphy_num = 4;
camss->csid_num = 3;
camss->vfe_num = 3;
+ } else if (of_device_is_compatible(dev->of_node,
+ "qcom,sm8250-camss")) {
+ camss->version = CAMSS_8250;
+ camss->csiphy_num = 6;
+ camss->csid_num = 4;
+ camss->vfe_num = 4;
} else {
ret = -EINVAL;
goto err_free;
@@ -1457,7 +1627,8 @@ void camss_delete(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_GEN1_COUNT;
- else if (camss->version == CAMSS_845)
+ else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250)
nbr_pm_domains = PM_DOMAIN_GEN2_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
@@ -1493,6 +1664,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8996-camss" },
{ .compatible = "qcom,sdm660-camss" },
{ .compatible = "qcom,sdm845-camss" },
+ { .compatible = "qcom,sm8250-camss" },
{ }
};
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index dc8b4154f92b..377e2474a485 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -69,6 +69,7 @@ enum camss_version {
CAMSS_8x96,
CAMSS_660,
CAMSS_845,
+ CAMSS_8250,
};
struct camss {
--
2.26.1
next prev parent reply other threads:[~2021-05-11 18:08 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 18:07 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-05-11 18:07 ` [PATCH 01/17] media: camss: csiphy-3ph: don't print HW version as an error Jonathan Marek
2021-05-19 10:16 ` Robert Foss
2021-05-11 18:07 ` [PATCH 02/17] media: camss: csiphy-3ph: disable interrupts Jonathan Marek
2021-05-19 15:52 ` Robert Foss
2021-05-11 18:07 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek
2021-05-19 16:26 ` Robert Foss
2021-05-25 17:19 ` Andrey Konovalov
2021-05-25 17:35 ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 04/17] media: camss: csid-170: fix non-10bit formats Jonathan Marek
2021-05-20 10:31 ` Robert Foss
2021-05-25 18:15 ` Andrey Konovalov
2021-05-25 18:38 ` Jonathan Marek
2021-05-26 13:59 ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 05/17] media: camss: csid-170: don't enable unused irqs Jonathan Marek
2021-05-20 10:39 ` Robert Foss
2021-05-11 18:07 ` [PATCH 06/17] media: camss: csid-170: remove stray comment Jonathan Marek
2021-05-20 10:57 ` Robert Foss
2021-05-11 18:07 ` [PATCH 07/17] media: camss: csid-170: support more than one lite vfe Jonathan Marek
2021-05-20 11:54 ` Robert Foss
2021-05-11 18:07 ` [PATCH 08/17] media: camss: csid-170: set the right HALF_CMD when disabled Jonathan Marek
2021-05-20 11:10 ` Robert Foss
2021-05-11 18:07 ` [PATCH 09/17] media: camss: csid: allow csid to work without a regulator Jonathan Marek
2021-05-20 12:14 ` Robert Foss
2021-05-11 18:07 ` [PATCH 10/17] media: camss: remove vdda-csiN from sdm845 resources Jonathan Marek
2021-05-31 11:02 ` Robert Foss
2021-05-11 18:07 ` [PATCH 11/17] media: camss: fix VFE irq name Jonathan Marek
2021-05-31 11:03 ` Robert Foss
2021-05-11 18:07 ` [PATCH 12/17] media: camss: vfe-170: clean up some dead code Jonathan Marek
2021-05-31 11:11 ` Robert Foss
2021-05-11 18:07 ` [PATCH 13/17] media: camss: vfe-170: fix "VFE halt timeout" error Jonathan Marek
2021-05-31 11:13 ` Robert Foss
2021-05-11 18:07 ` [PATCH 14/17] media: camss: Add initial support for VFE hardware version Titan 480 Jonathan Marek
2021-05-31 12:13 ` Robert Foss
2021-06-08 23:08 ` Jonathan Marek
2021-06-09 15:06 ` Robert Foss
2021-05-11 18:07 ` [PATCH 15/17] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Jonathan Marek
2021-05-31 12:14 ` Robert Foss
2021-05-11 18:07 ` Jonathan Marek [this message]
2021-05-31 16:07 ` [PATCH 16/17] media: camss: add support for SM8250 camss Robert Foss
2021-05-11 18:07 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Jonathan Marek
2021-05-12 18:35 ` Rob Herring
2021-06-08 22:34 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-06-08 22:35 ` [PATCH 16/17] media: camss: add support for SM8250 camss Jonathan Marek
2021-06-10 8:03 ` Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511180728.23781-17-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=andrey.konovalov@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robert.foss@linaro.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).