linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: Jonathan Marek <jonathan@marek.ca>, linux-arm-msm@vger.kernel.org
Cc: robert.foss@linaro.org, Todor Tomov <todor.too@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	"open list:QUALCOMM CAMERA SUBSYSTEM DRIVER" 
	<linux-media@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY
Date: Tue, 25 May 2021 20:19:51 +0300	[thread overview]
Message-ID: <e1188621-aa8d-d825-7454-491ffdec27c1@linaro.org> (raw)
In-Reply-To: <20210511180728.23781-4-jonathan@marek.ca>

Hi Jonathan,

Thank you for the patchset!

On 11.05.2021 21:07, Jonathan Marek wrote:
> Add support for CSIPHY (2PH/DPHY mode) found on SM8250 hardware.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>   .../qcom/camss/camss-csiphy-3ph-1-0.c         | 144 +++++++++++++++++-
>   1 file changed, 137 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index 783b65295d20..61947576ddfb 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -62,6 +62,7 @@ struct csiphy_reg_t {
>   	u32 csiphy_param_type;
>   };
>   
> +/* GEN2 1.0 2PH */
>   static const struct
>   csiphy_reg_t lane_regs_sdm845[5][14] = {
>   	{
> @@ -146,6 +147,121 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
>   	},
>   };
>   
> +/* GEN2 1.2.1 2PH */
> +static const struct
> +csiphy_reg_t lane_regs_sm8250[5][20] = {
> +	{
> +		{0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0900, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0908, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0904, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0904, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0034, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0010, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x001C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0008, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +		{0x0000, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0024, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	},
> +	{
> +		{0x0730, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C80, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C88, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C84, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C84, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0734, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0710, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x071C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0708, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +		{0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x070c, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0724, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	},
> +	{
> +		{0x0230, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0A00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0A08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0A04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0A04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0234, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0210, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x021C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0208, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +		{0x0200, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x020c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0224, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	},
> +	{
> +		{0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0B00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0B08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0B04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0B04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0434, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0410, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x041C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0408, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +		{0x0400, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x040c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0424, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	},
> +	{
> +		{0x0630, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0C04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0634, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0610, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x061C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0608, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +		{0x0600, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x060c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0624, 0x00, 0x00, CSIPHY_DNP_PARAMS},
> +		{0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +		{0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	},
> +};
> +
>   static void csiphy_hw_version_read(struct csiphy_device *csiphy,
>   				   struct device *dev)
>   {
> @@ -298,13 +414,23 @@ static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy,
>   static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
>   				     u8 settle_cnt)
>   {
> -	int i, l;
> -	u32 val;
> +	const struct csiphy_reg_t *r;
> +	int i, l, array_size;
> +	u32 val, lane_enable;
> +
> +	switch (csiphy->camss->version) {
> +	case CAMSS_845:
> +		r = &lane_regs_sdm845[0][0];
> +		array_size = ARRAY_SIZE(lane_regs_sdm845[0]);
> +		break;
> +	case CAMSS_8250:

CAMSS_8250 is only introduced in "[PATCH 16_17] media: camss: add support for SM8250 camss",
and this breaks bisecting.

Thanks,
Andrey

> +		r = &lane_regs_sm8250[0][0];
> +		array_size = ARRAY_SIZE(lane_regs_sm8250[0]);
> +		break;
> +	}
>   
>   	for (l = 0; l < 5; l++) {
> -		for (i = 0; i < 14; i++) {
> -			const struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];
> -
> +		for (i = 0; i < array_size; i++, r++) {
>   			switch (r->csiphy_param_type) {
>   			case CSIPHY_SETTLE_CNT_LOWER_BYTE:
>   				val = settle_cnt & 0xff;
> @@ -331,7 +457,10 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
>   
>   	settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
>   
> -	val = BIT(c->clk.pos);
> +	if (csiphy->camss->version == CAMSS_8250)
> +		val = BIT(7);
> +	else
> +		val = BIT(c->clk.pos);
>   	for (i = 0; i < c->num_data; i++)
>   		val |= BIT(c->data[i].pos * 2);
>   
> @@ -349,7 +478,8 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
>   	if (csiphy->camss->version == CAMSS_8x16 ||
>   	    csiphy->camss->version == CAMSS_8x96)
>   		csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
> -	else if (csiphy->camss->version == CAMSS_845)
> +	else if (csiphy->camss->version == CAMSS_845 ||
> +		 csiphy->camss->version == CAMSS_8250)
>   		csiphy_gen2_config_lanes(csiphy, settle_cnt);
>   
>   	/* IRQ_MASK registers - disable all interrupts */
> 

  parent reply	other threads:[~2021-05-25 17:20 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 18:07 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-05-11 18:07 ` [PATCH 01/17] media: camss: csiphy-3ph: don't print HW version as an error Jonathan Marek
2021-05-19 10:16   ` Robert Foss
2021-05-11 18:07 ` [PATCH 02/17] media: camss: csiphy-3ph: disable interrupts Jonathan Marek
2021-05-19 15:52   ` Robert Foss
2021-05-11 18:07 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek
2021-05-19 16:26   ` Robert Foss
2021-05-25 17:19   ` Andrey Konovalov [this message]
2021-05-25 17:35     ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 04/17] media: camss: csid-170: fix non-10bit formats Jonathan Marek
2021-05-20 10:31   ` Robert Foss
2021-05-25 18:15   ` Andrey Konovalov
2021-05-25 18:38     ` Jonathan Marek
2021-05-26 13:59       ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 05/17] media: camss: csid-170: don't enable unused irqs Jonathan Marek
2021-05-20 10:39   ` Robert Foss
2021-05-11 18:07 ` [PATCH 06/17] media: camss: csid-170: remove stray comment Jonathan Marek
2021-05-20 10:57   ` Robert Foss
2021-05-11 18:07 ` [PATCH 07/17] media: camss: csid-170: support more than one lite vfe Jonathan Marek
2021-05-20 11:54   ` Robert Foss
2021-05-11 18:07 ` [PATCH 08/17] media: camss: csid-170: set the right HALF_CMD when disabled Jonathan Marek
2021-05-20 11:10   ` Robert Foss
2021-05-11 18:07 ` [PATCH 09/17] media: camss: csid: allow csid to work without a regulator Jonathan Marek
2021-05-20 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 10/17] media: camss: remove vdda-csiN from sdm845 resources Jonathan Marek
2021-05-31 11:02   ` Robert Foss
2021-05-11 18:07 ` [PATCH 11/17] media: camss: fix VFE irq name Jonathan Marek
2021-05-31 11:03   ` Robert Foss
2021-05-11 18:07 ` [PATCH 12/17] media: camss: vfe-170: clean up some dead code Jonathan Marek
2021-05-31 11:11   ` Robert Foss
2021-05-11 18:07 ` [PATCH 13/17] media: camss: vfe-170: fix "VFE halt timeout" error Jonathan Marek
2021-05-31 11:13   ` Robert Foss
2021-05-11 18:07 ` [PATCH 14/17] media: camss: Add initial support for VFE hardware version Titan 480 Jonathan Marek
2021-05-31 12:13   ` Robert Foss
2021-06-08 23:08     ` Jonathan Marek
2021-06-09 15:06       ` Robert Foss
2021-05-11 18:07 ` [PATCH 15/17] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Jonathan Marek
2021-05-31 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 16/17] media: camss: add support for SM8250 camss Jonathan Marek
2021-05-31 16:07   ` Robert Foss
2021-05-11 18:07 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Jonathan Marek
2021-05-12 18:35   ` Rob Herring
2021-06-08 22:34 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-06-08 22:34 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1188621-aa8d-d825-7454-491ffdec27c1@linaro.org \
    --to=andrey.konovalov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robert.foss@linaro.org \
    --cc=todor.too@gmail.com \
    --subject='Re: [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox