* [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo
@ 2021-11-10 17:03 Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node Katherine Perez
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Katherine Perez @ 2021-11-10 17:03 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
Hi Bjorn and Vinod,
I'm trying to enable the display subsystem on SM8150 but am having
trouble enabling the DISP_CC_MDSS_AHB_CLK. Trace shows "disp_cc_mdss_ahb_clk
status stuck at off". Do you have any pointers on enabling this clock?
[ 2.478418] platform ae94000.dsi: Fixing up cyclic dependency with
ae00000.mdss:mdp@ae010000
[ 2.478832] platform ae94400.dsi-phy: Fixing up cyclic dependency
with af00000.clock-controller
[ 2.479134] msm_dsi_phy ae94400.dsi-phy: [drm:dsi_phy_driver_probe
[msm]] *ERROR* dsi_phy_driver_probe: Unable to get ahb clk
[ 2.480919] disp_cc-sm8250 af00000.clock-controller: supply mmcx not
found, using dummy regulator
[ 2.487023] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found,
using dummy regulator
[ 2.498954] platform ae96000.dsi: Fixing up cyclic dependency with
ae00000.mdss:mdp@ae010000
[ 2.513953] ------------[ cut here ]------------
[ 2.536309] disp_cc_mdss_ahb_clk status stuck at 'off'
[ 2.536320] WARNING: CPU: 6 PID: 76 at drivers/clk/qcom/clk-branch.c:91 clk_branch_wait+0x14c/0x164
[ 2.536329] Modules linked in: ath10k_snoc msm(+) ath10k_core gpu_sched crct10dif_ce ath drm_kms_helper qcom_spmi_adc5 qcom_vadc_common mac80211 syscopyarea qrtr libarc4 sysfillrect qcom_pon sysimgblt rtc_pm8xxx qcom_spmi_temp_alarm fb_sys_fops i2c_qcom_geni(+) drm cfg80211 rfkill phy_qcom_qmp ufs_qcom icc_osm_l3 qcom_q6v5_pas qcom_pil_info qcom_wdt qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qmi_helpers
[ 2.549572] mdt_loader qnoc_sm8150 socinfo rmtfs_mem
[ 2.549577] CPU: 6 PID: 76 Comm: kworker/u16:2 Not tainted 5.15.0 #17
[ 3.095528] Hardware name: Microsoft Surface Duo (DT)
[ 3.100721] Workqueue: events_unbound deferred_probe_work_func
[ 3.106713] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.113857] pc : clk_branch_wait+0x14c/0x164
[ 3.118238] lr : clk_branch_wait+0x14c/0x164
[ 3.122620] sp : ffff80001078ba40
[ 3.126030] x29: ffff80001078ba40 x28: 0000000000000000 x27: ffff65e6008e2100
[ 3.133348] x26: ffffb8630ec8e278 x25: ffff65e60005e005 x24: ffffb8630ebc0f98
[ 3.140665] x23: ffffb8630e234dd8 x22: 0000000000000001 x21: ffffb8630d5b8b60
[ 3.147983] x20: 0000000000000000 x19: ffffb8630eb5e7b8 x18: 0000000000000030
[ 3.155301] x17: 2e726f74616c7567 x16: ffffb8630d5a3800 x15: ffffffffffffffff
[ 3.162619] x14: 0000000000000000 x13: 6f27207461206b63 x12: 7574732073757461
[ 3.169937] x11: 77705f313439386d x10: 0000000000000027 x9 : ffffb8630cf974bc
[ 3.177256] x8 : 0000000000000027 x7 : 0000000000000002 x6 : 0000000000000027
[ 3.184573] x5 : ffff65e6f93cc9a8 x4 : ffff80001078b890 x3 : 0000000000000001
[ 3.191891] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff65e600851d80
[ 3.199209] Call trace:
[ 3.201722] clk_branch_wait+0x14c/0x164
[ 3.205748] clk_branch2_enable+0x3c/0x60
[ 3.209869] clk_core_enable+0x78/0x220
[ 3.213809] clk_enable+0x38/0x60
[ 3.217219] dsi_phy_enable_resource+0x98/0xac [msm]
[ 3.222387] dsi_phy_driver_probe+0x29c/0x4f8 [msm]
[ 3.227453] platform_probe+0x74/0xe4
[ 3.231218] really_probe.part.0+0xa4/0x328
[ 3.235512] __driver_probe_device+0xa0/0x150
[ 3.239990] driver_probe_device+0x4c/0x164
[ 3.244285] __device_attach_driver+0xc0/0x128
[ 3.248850] bus_for_each_drv+0x84/0xe0
[ 3.252788] __device_attach+0xe0/0x188
[ 3.256727] device_initial_probe+0x20/0x2c
[ 3.261020] bus_probe_device+0xa8/0xbc
[ 3.264958] deferred_probe_work_func+0x90/0xc8
[ 3.269609] process_one_work+0x1f4/0x43c
[ 3.273734] worker_thread+0x78/0x4f0
[ 3.277500] kthread+0x154/0x160
[ 3.280813] ret_from_fork+0x10/0x20
[ 3.284482] ---[ end trace 734ed75908fc6b0e ]---
Best,
Katherine
Katherine Perez (4):
arm64: dts: qcom: sm8150: add dispcc node
arm64: dts: qcom: sm8150: add display nodes
arm64: dts: qcom: sm8150: add DSI display nodes
arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 26 ++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 292 ++++++++++++++++++
2 files changed, 318 insertions(+)
--
2.31.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node
2021-11-10 17:03 [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo Katherine Perez
@ 2021-11-10 17:03 ` Katherine Perez
2021-11-11 21:56 ` Konrad Dybcio
2021-11-10 17:03 ` [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes Katherine Perez
` (2 subsequent siblings)
3 siblings, 1 reply; 7+ messages in thread
From: Katherine Perez @ 2021-11-10 17:03 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
Add the display clock controller node to sm8150.
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 81b4ff2cc4cd..ee40af469fab 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -3260,6 +3261,30 @@ camnoc_virt: interconnect@ac00000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8150-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes
2021-11-10 17:03 [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node Katherine Perez
@ 2021-11-10 17:03 ` Katherine Perez
2021-11-11 22:00 ` Konrad Dybcio
2021-11-10 17:03 ` [RFC PATCH 3/4] arm64: dts: qcom: sm8150: add DSI " Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 4/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo Katherine Perez
3 siblings, 1 reply; 7+ messages in thread
From: Katherine Perez @ 2021-11-10 17:03 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
Add MDSS and MDP nodes to sm8150.
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 ++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ee40af469fab..38dbc39103ba 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3261,6 +3261,98 @@ camnoc_virt: interconnect@ac00000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ mdss: mdss@ae00000 {
+ compatible = "qcom,sm8150-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ iommus = <&apps_smmu 0x800 0x420>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss_mdp: mdp@ae010000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0x0ae01000 0x84208>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: mdp-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8150-dispcc";
reg = <0 0x0af00000 0 0x10000>;
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RFC PATCH 3/4] arm64: dts: qcom: sm8150: add DSI display nodes
2021-11-10 17:03 [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes Katherine Perez
@ 2021-11-10 17:03 ` Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 4/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo Katherine Perez
3 siblings, 0 replies; 7+ messages in thread
From: Katherine Perez @ 2021-11-10 17:03 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
Add DSI controller and PHY nodes to sm8150.
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 183 ++++++++++++++++++++++++++-
1 file changed, 179 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 38dbc39103ba..afa612daefa1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3261,6 +3261,35 @@ camnoc_virt: interconnect@ac00000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ dsi_opp_table: dsi-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-328580000 {
+ opp-hz = /bits/ 64 <328580000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
mdss: mdss@ae00000 {
compatible = "qcom,sm8150-mdss";
reg = <0 0x0ae00000 0 0x1000>;
@@ -3351,6 +3380,152 @@ opp-460000000 {
};
};
};
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm-8150";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_CX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm-8150";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
};
dispcc: clock-controller@af00000 {
@@ -3359,10 +3534,10 @@ dispcc: clock-controller@af00000 {
power-domains = <&rpmhpd SM8150_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
- <0>,
- <0>,
- <0>,
- <0>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
<0>,
<0>;
clock-names = "bi_tcxo",
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RFC PATCH 4/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo
2021-11-10 17:03 [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo Katherine Perez
` (2 preceding siblings ...)
2021-11-10 17:03 ` [RFC PATCH 3/4] arm64: dts: qcom: sm8150: add DSI " Katherine Perez
@ 2021-11-10 17:03 ` Katherine Perez
3 siblings, 0 replies; 7+ messages in thread
From: Katherine Perez @ 2021-11-10 17:03 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
Add support for display to Microsoft Surface Duo.
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index 5901c28e6696..721f76b1b30c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -270,6 +270,8 @@ vdda_hv_ebi1:
vdda_hv_ebi2:
vdda_hv_ebi3:
vdda_hv_refgen0:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
vdda_qlink_hv_ck:
vreg_l3c_1p2: ldo3 {
regulator-min-microvolt = <1200000>;
@@ -359,6 +361,26 @@ vreg_l6f_2p85: ldo6 {
};
};
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_dsi_0_pll_0p9>;
+};
+
+&dsi1 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi1_1p2>;
+};
+
+&dsi1_phy {
+ status = "okay";
+ vdds-supply = <&vdda_dsi_1_pll_0p9>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -430,6 +452,10 @@ &i2c19 {
/* MAX34417 @ 0x1e */
};
+&mdss {
+ status = "okay";
+};
+
&pon {
pwrkey {
status = "okay";
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node
2021-11-10 17:03 ` [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node Katherine Perez
@ 2021-11-11 21:56 ` Konrad Dybcio
0 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-11-11 21:56 UTC (permalink / raw)
To: Katherine Perez, Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
On 10.11.2021 18:03, Katherine Perez wrote:
> Add the display clock controller node to sm8150.
>
> Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes
2021-11-10 17:03 ` [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes Katherine Perez
@ 2021-11-11 22:00 ` Konrad Dybcio
0 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-11-11 22:00 UTC (permalink / raw)
To: Katherine Perez, Bjorn Andersson, Vinod Koul; +Cc: linux-arm-msm
On 10.11.2021 18:03, Katherine Perez wrote:
> Add MDSS and MDP nodes to sm8150.
>
> Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 ++++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index ee40af469fab..38dbc39103ba 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3261,6 +3261,98 @@ camnoc_virt: interconnect@ac00000 {
> qcom,bcm-voters = <&apps_bcm_voter>;
>
[...]
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <460000000>,
> + <19200000>;
> +
I'm not sure if assigning F_MAX is a good idea, but it proobably won't hurt, given we have an OPP table?
Besides that,
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-11-11 22:00 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-10 17:03 [RFC PATCH 0/4] arm64: dts: sm8150: display support for Microsoft Surface Duo Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 1/4] arm64: dts: qcom: sm8150: add dispcc node Katherine Perez
2021-11-11 21:56 ` Konrad Dybcio
2021-11-10 17:03 ` [RFC PATCH 2/4] arm64: dts: qcom: sm8150: add display nodes Katherine Perez
2021-11-11 22:00 ` Konrad Dybcio
2021-11-10 17:03 ` [RFC PATCH 3/4] arm64: dts: qcom: sm8150: add DSI " Katherine Perez
2021-11-10 17:03 ` [RFC PATCH 4/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo Katherine Perez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).