* [PATCHv3 0/1] coresight: Do not default to CPU0 for missing CPU phandle
@ 2019-06-24 3:36 Sai Prakash Ranjan
2019-06-24 3:36 ` [PATCHv3 1/1] " Sai Prakash Ranjan
0 siblings, 1 reply; 6+ messages in thread
From: Sai Prakash Ranjan @ 2019-06-24 3:36 UTC (permalink / raw)
To: Mathieu Poirier, Suzuki K Poulose, Leo Yan, Rob Herring,
devicetree, Alexander Shishkin, Andy Gross, David Brown,
Mark Rutland
Cc: Rajendra Nayak, Vivek Gautam, Sibi Sankar, linux-arm-kernel,
linux-kernel, linux-arm-msm, Sai Prakash Ranjan
In case of missing CPU phandle, the affinity is set default to
CPU0 which is not a correct assumption. Fix this in coresight
platform to set affinity to invalid and abort the probe in drivers.
Also update the dt-bindings accordingly.
v3:
* Addressed review comments from Suzuki and updated
acpi_coresight_get_cpu.
* Removed patch 2 which had invalid check for online
cpus.
v2:
* Addressed review comments from Suzuki and Mathieu.
* Allows the probe of etm and cpu-debug to abort earlier
in case of unavailability of respective cpus.
Sai Prakash Ranjan (1):
coresight: Do not default to CPU0 for missing CPU phandle
.../bindings/arm/coresight-cpu-debug.txt | 4 ++--
.../devicetree/bindings/arm/coresight.txt | 8 +++++---
.../hwtracing/coresight/coresight-cpu-debug.c | 3 +++
drivers/hwtracing/coresight/coresight-etm3x.c | 3 +++
drivers/hwtracing/coresight/coresight-etm4x.c | 3 +++
drivers/hwtracing/coresight/coresight-platform.c | 16 ++++++++--------
6 files changed, 24 insertions(+), 13 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCHv3 1/1] coresight: Do not default to CPU0 for missing CPU phandle
2019-06-24 3:36 [PATCHv3 0/1] coresight: Do not default to CPU0 for missing CPU phandle Sai Prakash Ranjan
@ 2019-06-24 3:36 ` Sai Prakash Ranjan
2019-06-24 8:26 ` Suzuki K Poulose
2019-06-26 17:41 ` Mathieu Poirier
0 siblings, 2 replies; 6+ messages in thread
From: Sai Prakash Ranjan @ 2019-06-24 3:36 UTC (permalink / raw)
To: Mathieu Poirier, Suzuki K Poulose, Leo Yan, Rob Herring,
devicetree, Alexander Shishkin, Andy Gross, David Brown,
Mark Rutland
Cc: Rajendra Nayak, Vivek Gautam, Sibi Sankar, linux-arm-kernel,
linux-kernel, linux-arm-msm, Sai Prakash Ranjan
Coresight platform support assumes that a missing "cpu" phandle
defaults to CPU0. This could be problematic and unnecessarily binds
components to CPU0, where they may not be. Let us make the DT binding
rules a bit stricter by not defaulting to CPU0 for missing "cpu"
affinity information.
Also in coresight etm and cpu-debug drivers, abort the probe
for such cases.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
.../bindings/arm/coresight-cpu-debug.txt | 4 ++--
.../devicetree/bindings/arm/coresight.txt | 8 +++++---
.../hwtracing/coresight/coresight-cpu-debug.c | 3 +++
drivers/hwtracing/coresight/coresight-etm3x.c | 3 +++
drivers/hwtracing/coresight/coresight-etm4x.c | 3 +++
drivers/hwtracing/coresight/coresight-platform.c | 16 ++++++++--------
6 files changed, 24 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
index 298291211ea4..f1de3247c1b7 100644
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
@@ -26,8 +26,8 @@ Required properties:
processor core is clocked by the internal CPU clock, so it
is enabled with CPU clock by default.
-- cpu : the CPU phandle the debug module is affined to. When omitted
- the module is considered to belong to CPU0.
+- cpu : the CPU phandle the debug module is affined to. Do not assume it
+ to default to CPU0 if omitted.
Optional properties:
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 8a88ddebc1a2..fcc3bacfd8bc 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -59,6 +59,11 @@ its hardware characteristcs.
* port or ports: see "Graph bindings for Coresight" below.
+* Additional required property for Embedded Trace Macrocell (version 3.x and
+ version 4.x):
+ * cpu: the cpu phandle this ETM/PTM is affined to. Do not
+ assume it to default to CPU0 if omitted.
+
* Additional required properties for System Trace Macrocells (STM):
* reg: along with the physical base address and length of the register
set as described above, another entry is required to describe the
@@ -87,9 +92,6 @@ its hardware characteristcs.
* arm,cp14: must be present if the system accesses ETM/PTM management
registers via co-processor 14.
- * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
- source is considered to belong to CPU0.
-
* Optional property for TMC:
* arm,buffer-size: size of contiguous buffer space for TMC ETR
diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
index 07a1367c733f..58bfd6319f65 100644
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -579,6 +579,9 @@ static int debug_probe(struct amba_device *adev, const struct amba_id *id)
return -ENOMEM;
drvdata->cpu = coresight_get_cpu(dev);
+ if (drvdata->cpu < 0)
+ return drvdata->cpu;
+
if (per_cpu(debug_drvdata, drvdata->cpu)) {
dev_err(dev, "CPU%d drvdata has already been initialized\n",
drvdata->cpu);
diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
index 225c2982e4fe..e2cb6873c3f2 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x.c
@@ -816,6 +816,9 @@ static int etm_probe(struct amba_device *adev, const struct amba_id *id)
}
drvdata->cpu = coresight_get_cpu(dev);
+ if (drvdata->cpu < 0)
+ return drvdata->cpu;
+
desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
if (!desc.name)
return -ENOMEM;
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 7fe266194ab5..7bcac8896fc1 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -1101,6 +1101,9 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&drvdata->spinlock);
drvdata->cpu = coresight_get_cpu(dev);
+ if (drvdata->cpu < 0)
+ return drvdata->cpu;
+
desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
if (!desc.name)
return -ENOMEM;
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index 3c5ceda8db24..4990da2c13e9 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -159,16 +159,16 @@ static int of_coresight_get_cpu(struct device *dev)
struct device_node *dn;
if (!dev->of_node)
- return 0;
+ return -ENODEV;
+
dn = of_parse_phandle(dev->of_node, "cpu", 0);
- /* Affinity defaults to CPU0 */
if (!dn)
- return 0;
+ return -ENODEV;
+
cpu = of_cpu_node_to_id(dn);
of_node_put(dn);
- /* Affinity to CPU0 if no cpu nodes are found */
- return (cpu < 0) ? 0 : cpu;
+ return cpu;
}
/*
@@ -734,14 +734,14 @@ static int acpi_coresight_get_cpu(struct device *dev)
struct acpi_device *adev = ACPI_COMPANION(dev);
if (!adev)
- return 0;
+ return -ENODEV;
status = acpi_get_parent(adev->handle, &cpu_handle);
if (ACPI_FAILURE(status))
- return 0;
+ return -ENODEV;
cpu = acpi_handle_to_logical_cpuid(cpu_handle);
if (cpu >= nr_cpu_ids)
- return 0;
+ return -ENODEV;
return cpu;
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCHv3 1/1] coresight: Do not default to CPU0 for missing CPU phandle
2019-06-24 3:36 ` [PATCHv3 1/1] " Sai Prakash Ranjan
@ 2019-06-24 8:26 ` Suzuki K Poulose
2019-06-24 9:27 ` Sai Prakash Ranjan
2019-06-26 17:41 ` Mathieu Poirier
1 sibling, 1 reply; 6+ messages in thread
From: Suzuki K Poulose @ 2019-06-24 8:26 UTC (permalink / raw)
To: saiprakash.ranjan, mathieu.poirier, leo.yan, robh+dt, devicetree,
alexander.shishkin, andy.gross, david.brown, mark.rutland
Cc: rnayak, vivek.gautam, sibis, linux-arm-kernel, linux-kernel,
linux-arm-msm
Sai,
Thanks for getting this done.
On 24/06/2019 04:36, Sai Prakash Ranjan wrote:
> Coresight platform support assumes that a missing "cpu" phandle
> defaults to CPU0. This could be problematic and unnecessarily binds
> components to CPU0, where they may not be. Let us make the DT binding
> rules a bit stricter by not defaulting to CPU0 for missing "cpu"
> affinity information.
>
> Also in coresight etm and cpu-debug drivers, abort the probe
> for such cases.
>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv3 1/1] coresight: Do not default to CPU0 for missing CPU phandle
2019-06-24 8:26 ` Suzuki K Poulose
@ 2019-06-24 9:27 ` Sai Prakash Ranjan
0 siblings, 0 replies; 6+ messages in thread
From: Sai Prakash Ranjan @ 2019-06-24 9:27 UTC (permalink / raw)
To: Suzuki K Poulose, mathieu.poirier, leo.yan, robh+dt, devicetree,
alexander.shishkin, andy.gross, david.brown, mark.rutland
Cc: rnayak, vivek.gautam, sibis, linux-arm-kernel, linux-kernel,
linux-arm-msm
On 6/24/2019 1:56 PM, Suzuki K Poulose wrote:
> Sai,
>
> Thanks for getting this done.
>
> On 24/06/2019 04:36, Sai Prakash Ranjan wrote:
>> Coresight platform support assumes that a missing "cpu" phandle
>> defaults to CPU0. This could be problematic and unnecessarily binds
>> components to CPU0, where they may not be. Let us make the DT binding
>> rules a bit stricter by not defaulting to CPU0 for missing "cpu"
>> affinity information.
>>
>> Also in coresight etm and cpu-debug drivers, abort the probe
>> for such cases.
>>
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>
> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Thanks for the review Suzuki.
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv3 1/1] coresight: Do not default to CPU0 for missing CPU phandle
2019-06-24 3:36 ` [PATCHv3 1/1] " Sai Prakash Ranjan
2019-06-24 8:26 ` Suzuki K Poulose
@ 2019-06-26 17:41 ` Mathieu Poirier
2019-06-26 19:02 ` Sai Prakash Ranjan
1 sibling, 1 reply; 6+ messages in thread
From: Mathieu Poirier @ 2019-06-26 17:41 UTC (permalink / raw)
To: Sai Prakash Ranjan
Cc: Suzuki K Poulose, Leo Yan, Rob Herring, devicetree,
Alexander Shishkin, Andy Gross, David Brown, Mark Rutland,
Rajendra Nayak, Vivek Gautam, Sibi Sankar, linux-arm-kernel,
Linux Kernel Mailing List, linux-arm-msm
Hi Sai,
On Sun, 23 Jun 2019 at 21:36, Sai Prakash Ranjan
<saiprakash.ranjan@codeaurora.org> wrote:
>
> Coresight platform support assumes that a missing "cpu" phandle
> defaults to CPU0. This could be problematic and unnecessarily binds
> components to CPU0, where they may not be. Let us make the DT binding
> rules a bit stricter by not defaulting to CPU0 for missing "cpu"
> affinity information.
>
> Also in coresight etm and cpu-debug drivers, abort the probe
> for such cases.
>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
> .../bindings/arm/coresight-cpu-debug.txt | 4 ++--
> .../devicetree/bindings/arm/coresight.txt | 8 +++++---
> .../hwtracing/coresight/coresight-cpu-debug.c | 3 +++
> drivers/hwtracing/coresight/coresight-etm3x.c | 3 +++
> drivers/hwtracing/coresight/coresight-etm4x.c | 3 +++
> drivers/hwtracing/coresight/coresight-platform.c | 16 ++++++++--------
> 6 files changed, 24 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> index 298291211ea4..f1de3247c1b7 100644
> --- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> @@ -26,8 +26,8 @@ Required properties:
> processor core is clocked by the internal CPU clock, so it
> is enabled with CPU clock by default.
>
> -- cpu : the CPU phandle the debug module is affined to. When omitted
> - the module is considered to belong to CPU0.
> +- cpu : the CPU phandle the debug module is affined to. Do not assume it
> + to default to CPU0 if omitted.
>
> Optional properties:
>
> diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
> index 8a88ddebc1a2..fcc3bacfd8bc 100644
> --- a/Documentation/devicetree/bindings/arm/coresight.txt
> +++ b/Documentation/devicetree/bindings/arm/coresight.txt
> @@ -59,6 +59,11 @@ its hardware characteristcs.
>
> * port or ports: see "Graph bindings for Coresight" below.
>
> +* Additional required property for Embedded Trace Macrocell (version 3.x and
> + version 4.x):
> + * cpu: the cpu phandle this ETM/PTM is affined to. Do not
> + assume it to default to CPU0 if omitted.
> +
> * Additional required properties for System Trace Macrocells (STM):
> * reg: along with the physical base address and length of the register
> set as described above, another entry is required to describe the
> @@ -87,9 +92,6 @@ its hardware characteristcs.
> * arm,cp14: must be present if the system accesses ETM/PTM management
> registers via co-processor 14.
>
> - * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
> - source is considered to belong to CPU0.
> -
> * Optional property for TMC:
>
> * arm,buffer-size: size of contiguous buffer space for TMC ETR
> diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
> index 07a1367c733f..58bfd6319f65 100644
> --- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
> +++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
> @@ -579,6 +579,9 @@ static int debug_probe(struct amba_device *adev, const struct amba_id *id)
> return -ENOMEM;
>
> drvdata->cpu = coresight_get_cpu(dev);
> + if (drvdata->cpu < 0)
> + return drvdata->cpu;
> +
> if (per_cpu(debug_drvdata, drvdata->cpu)) {
> dev_err(dev, "CPU%d drvdata has already been initialized\n",
> drvdata->cpu);
> diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c
> index 225c2982e4fe..e2cb6873c3f2 100644
> --- a/drivers/hwtracing/coresight/coresight-etm3x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm3x.c
> @@ -816,6 +816,9 @@ static int etm_probe(struct amba_device *adev, const struct amba_id *id)
> }
>
> drvdata->cpu = coresight_get_cpu(dev);
> + if (drvdata->cpu < 0)
> + return drvdata->cpu;
> +
> desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
> if (!desc.name)
> return -ENOMEM;
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
> index 7fe266194ab5..7bcac8896fc1 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
> @@ -1101,6 +1101,9 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id)
> spin_lock_init(&drvdata->spinlock);
>
> drvdata->cpu = coresight_get_cpu(dev);
> + if (drvdata->cpu < 0)
> + return drvdata->cpu;
> +
> desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
> if (!desc.name)
> return -ENOMEM;
> diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
> index 3c5ceda8db24..4990da2c13e9 100644
> --- a/drivers/hwtracing/coresight/coresight-platform.c
> +++ b/drivers/hwtracing/coresight/coresight-platform.c
> @@ -159,16 +159,16 @@ static int of_coresight_get_cpu(struct device *dev)
> struct device_node *dn;
>
> if (!dev->of_node)
> - return 0;
> + return -ENODEV;
> +
> dn = of_parse_phandle(dev->of_node, "cpu", 0);
> - /* Affinity defaults to CPU0 */
> if (!dn)
> - return 0;
> + return -ENODEV;
> +
> cpu = of_cpu_node_to_id(dn);
> of_node_put(dn);
>
> - /* Affinity to CPU0 if no cpu nodes are found */
> - return (cpu < 0) ? 0 : cpu;
> + return cpu;
> }
Function of_coresight_get_cpu() needs to return -ENODEV rather than 0
when !CONFIG_OF
>
> /*
> @@ -734,14 +734,14 @@ static int acpi_coresight_get_cpu(struct device *dev)
> struct acpi_device *adev = ACPI_COMPANION(dev);
>
> if (!adev)
> - return 0;
> + return -ENODEV;
> status = acpi_get_parent(adev->handle, &cpu_handle);
> if (ACPI_FAILURE(status))
> - return 0;
> + return -ENODEV;
>
> cpu = acpi_handle_to_logical_cpuid(cpu_handle);
> if (cpu >= nr_cpu_ids)
> - return 0;
> + return -ENODEV;
> return cpu;
> }
>
Same as above, but for !CONFIG_ACPI
Thanks,
Mathieu
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv3 1/1] coresight: Do not default to CPU0 for missing CPU phandle
2019-06-26 17:41 ` Mathieu Poirier
@ 2019-06-26 19:02 ` Sai Prakash Ranjan
0 siblings, 0 replies; 6+ messages in thread
From: Sai Prakash Ranjan @ 2019-06-26 19:02 UTC (permalink / raw)
To: Mathieu Poirier
Cc: Suzuki K Poulose, Leo Yan, Rob Herring, devicetree,
Alexander Shishkin, Andy Gross, David Brown, Mark Rutland,
Rajendra Nayak, Vivek Gautam, Sibi Sankar, linux-arm-kernel,
Linux Kernel Mailing List, linux-arm-msm
Hi Mathieu,
On 6/26/2019 11:11 PM, Mathieu Poirier wrote:
> Hi Sai,
>
> On Sun, 23 Jun 2019 at 21:36, Sai Prakash Ranjan
> <saiprakash.ranjan@codeaurora.org> wrote:
>> diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
>> index 3c5ceda8db24..4990da2c13e9 100644
>> --- a/drivers/hwtracing/coresight/coresight-platform.c
>> +++ b/drivers/hwtracing/coresight/coresight-platform.c
>> @@ -159,16 +159,16 @@ static int of_coresight_get_cpu(struct device *dev)
>> struct device_node *dn;
>>
>> if (!dev->of_node)
>> - return 0;
>> + return -ENODEV;
>> +
>> dn = of_parse_phandle(dev->of_node, "cpu", 0);
>> - /* Affinity defaults to CPU0 */
>> if (!dn)
>> - return 0;
>> + return -ENODEV;
>> +
>> cpu = of_cpu_node_to_id(dn);
>> of_node_put(dn);
>>
>> - /* Affinity to CPU0 if no cpu nodes are found */
>> - return (cpu < 0) ? 0 : cpu;
>> + return cpu;
>> }
>
> Function of_coresight_get_cpu() needs to return -ENODEV rather than 0
> when !CONFIG_OF
>
>>
>> /*
>> @@ -734,14 +734,14 @@ static int acpi_coresight_get_cpu(struct device *dev)
>> struct acpi_device *adev = ACPI_COMPANION(dev);
>>
>> if (!adev)
>> - return 0;
>> + return -ENODEV;
>> status = acpi_get_parent(adev->handle, &cpu_handle);
>> if (ACPI_FAILURE(status))
>> - return 0;
>> + return -ENODEV;
>>
>> cpu = acpi_handle_to_logical_cpuid(cpu_handle);
>> if (cpu >= nr_cpu_ids)
>> - return 0;
>> + return -ENODEV;
>> return cpu;
>> }
>>
>
> Same as above, but for !CONFIG_ACPI
>
Have fixed and resent, thanks Mathieu.
-Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-06-26 19:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-24 3:36 [PATCHv3 0/1] coresight: Do not default to CPU0 for missing CPU phandle Sai Prakash Ranjan
2019-06-24 3:36 ` [PATCHv3 1/1] " Sai Prakash Ranjan
2019-06-24 8:26 ` Suzuki K Poulose
2019-06-24 9:27 ` Sai Prakash Ranjan
2019-06-26 17:41 ` Mathieu Poirier
2019-06-26 19:02 ` Sai Prakash Ranjan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).