From: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
<linux-arm-msm@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<freedreno@lists.freedesktop.org>
Subject: Re: [PATCH v2 1/4] drm/msm/dpu: drop scaler config from plane state
Date: Tue, 7 Dec 2021 11:30:38 -0800 [thread overview]
Message-ID: <9ca7a443-49ed-8eec-de0a-d95552988a0e@quicinc.com> (raw)
In-Reply-To: <20211201225140.2481577-2-dmitry.baryshkov@linaro.org>
On 12/1/2021 2:51 PM, Dmitry Baryshkov wrote:
> Scaler and pixel_ext configuration does not contain a long living state,
> it is used only during plane update, so remove these two fiels from
> dpu_plane_state and allocate them on stack.
s/fiels/fields
apart from that,
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 59 ++++++++++-------------
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 6 ---
> 2 files changed, 26 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index ca190d92f0d5..4c373abbe89c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -536,14 +536,12 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
> struct dpu_plane_state *pstate,
> uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
> struct dpu_hw_scaler3_cfg *scale_cfg,
> + struct dpu_hw_pixel_ext *pixel_ext,
> const struct dpu_format *fmt,
> uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
> {
> uint32_t i;
>
> - memset(scale_cfg, 0, sizeof(*scale_cfg));
> - memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext));
> -
> scale_cfg->phase_step_x[DPU_SSPP_COMP_0] =
> mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w);
> scale_cfg->phase_step_y[DPU_SSPP_COMP_0] =
> @@ -582,9 +580,9 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
> scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
> }
>
> - pstate->pixel_ext.num_ext_pxls_top[i] =
> + pixel_ext->num_ext_pxls_top[i] =
> scale_cfg->src_height[i];
> - pstate->pixel_ext.num_ext_pxls_left[i] =
> + pixel_ext->num_ext_pxls_left[i] =
> scale_cfg->src_width[i];
> }
> if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h)
> @@ -662,6 +660,11 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
> struct dpu_hw_pipe_cfg *pipe_cfg)
> {
> const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format);
> + struct dpu_hw_scaler3_cfg scaler3_cfg;
> + struct dpu_hw_pixel_ext pixel_ext;
> +
> + memset(&scaler3_cfg, 0, sizeof(scaler3_cfg));
> + memset(&pixel_ext, 0, sizeof(pixel_ext));
>
> /* don't chroma subsample if decimating */
> /* update scaler. calculate default config for QSEED3 */
> @@ -670,8 +673,23 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
> drm_rect_height(&pipe_cfg->src_rect),
> drm_rect_width(&pipe_cfg->dst_rect),
> drm_rect_height(&pipe_cfg->dst_rect),
> - &pstate->scaler3_cfg, fmt,
> + &scaler3_cfg, &pixel_ext, fmt,
> info->hsub, info->vsub);
> +
> + if (pdpu->pipe_hw->ops.setup_pe)
> + pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
> + &pixel_ext);
> +
> + /**
> + * when programmed in multirect mode, scalar block will be
> + * bypassed. Still we need to update alpha and bitwidth
> + * ONLY for RECT0
> + */
> + if (pdpu->pipe_hw->ops.setup_scaler &&
> + pstate->multirect_index != DPU_SSPP_RECT_1)
> + pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
> + pipe_cfg, &pixel_ext,
> + &scaler3_cfg);
> }
>
> /**
> @@ -712,7 +730,6 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
> drm_rect_width(&pipe_cfg.dst_rect);
> pipe_cfg.src_rect.y2 =
> drm_rect_height(&pipe_cfg.dst_rect);
> - _dpu_plane_setup_scaler(pdpu, pstate, fmt, true, &pipe_cfg);
>
> if (pdpu->pipe_hw->ops.setup_format)
> pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw,
> @@ -724,15 +741,7 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
> &pipe_cfg,
> pstate->multirect_index);
>
> - if (pdpu->pipe_hw->ops.setup_pe)
> - pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
> - &pstate->pixel_ext);
> -
> - if (pdpu->pipe_hw->ops.setup_scaler &&
> - pstate->multirect_index != DPU_SSPP_RECT_1)
> - pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
> - &pipe_cfg, &pstate->pixel_ext,
> - &pstate->scaler3_cfg);
> + _dpu_plane_setup_scaler(pdpu, pstate, fmt, true, &pipe_cfg);
> }
>
> return 0;
> @@ -1129,8 +1138,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
>
> pipe_cfg.dst_rect = state->dst;
>
> - _dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg);
> -
> /* override for color fill */
> if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
> /* skip remaining processing on color fill */
> @@ -1143,21 +1150,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
> pstate->multirect_index);
> }
>
> - if (pdpu->pipe_hw->ops.setup_pe &&
> - (pstate->multirect_index != DPU_SSPP_RECT_1))
> - pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
> - &pstate->pixel_ext);
> -
> - /**
> - * when programmed in multirect mode, scalar block will be
> - * bypassed. Still we need to update alpha and bitwidth
> - * ONLY for RECT0
> - */
> - if (pdpu->pipe_hw->ops.setup_scaler &&
> - pstate->multirect_index != DPU_SSPP_RECT_1)
> - pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
> - &pipe_cfg, &pstate->pixel_ext,
> - &pstate->scaler3_cfg);
> + _dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg);
>
> if (pdpu->pipe_hw->ops.setup_multirect)
> pdpu->pipe_hw->ops.setup_multirect(
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> index 52792526e904..1ee5ca5fcdf7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
> @@ -23,8 +23,6 @@
> * @multirect_index: index of the rectangle of SSPP
> * @multirect_mode: parallel or time multiplex multirect mode
> * @pending: whether the current update is still pending
> - * @scaler3_cfg: configuration data for scaler3
> - * @pixel_ext: configuration data for pixel extensions
> * @plane_fetch_bw: calculated BW per plane
> * @plane_clk: calculated clk per plane
> */
> @@ -37,10 +35,6 @@ struct dpu_plane_state {
> uint32_t multirect_mode;
> bool pending;
>
> - /* scaler configuration */
> - struct dpu_hw_scaler3_cfg scaler3_cfg;
> - struct dpu_hw_pixel_ext pixel_ext;
> -
> u64 plane_fetch_bw;
> u64 plane_clk;
> };
>
next prev parent reply other threads:[~2021-12-07 19:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 22:51 [PATCH v2 0/4] drm/msm/dpu: cleanup plane state Dmitry Baryshkov
2021-12-01 22:51 ` [PATCH v2 1/4] drm/msm/dpu: drop scaler config from " Dmitry Baryshkov
2021-12-07 19:30 ` Abhinav Kumar [this message]
2021-12-01 22:51 ` [PATCH v2 2/4] drm/msm/dpu: drop pe argument from _dpu_hw_sspp_setup_scaler3 Dmitry Baryshkov
2021-12-07 19:43 ` Abhinav Kumar
2021-12-01 22:51 ` [PATCH v2 3/4] drm/msm/dpu: simplify DPU_SSPP features checks Dmitry Baryshkov
2021-12-07 19:45 ` [Freedreno] " Abhinav Kumar
2021-12-01 22:51 ` [PATCH v2 4/4] drm/msm/dpu: fix CDP setup to account for multirect index Dmitry Baryshkov
2021-12-07 20:06 ` Abhinav Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ca7a443-49ed-8eec-de0a-d95552988a0e@quicinc.com \
--to=quic_abhinavk@quicinc.com \
--cc=abhinavk@codeaurora.org \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).