linux-arm-msm.vger.kernel.org archive mirror

 messages from 2019-11-25 13:59:39 to 2019-12-04 22:00:36 UTC [more...]

[PATCH 1/5] drm: msm: Add 618 gpu to the adreno gpu list
 2019-12-04 22:00 UTC  (7+ messages)
` [PATCH 2/5] drm: msm: a6xx: Add support for A618
` [PATCH 3/5] drm: msm: a6xx: Dump GBIF registers, debugbus in gpu state
` [PATCH 4/5] drm: msm: a6xx: fix debug bus register configuration
` [PATCH 5/5] arm: dts: sc7180: Add A618 gpu dt blob

[PATCH] clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs
 2019-12-04 20:04 UTC 

[PATCH v2 0/4] drm/msm/gpu: add support for ocmem interconnect
 2019-12-04 19:36 UTC  (3+ messages)
` [PATCH v2 1/4] dt-bindings: drm/msm/gpu: document second interconnect

[PATCH v2 1/8] dt-bindings: arm-smmu: Add Adreno GPU variant
 2019-12-04 18:01 UTC  (5+ messages)
  ` [PATCH v2 4/8] iommu/arm-smmu: Add split pagetables for Adreno IOMMU implementations

[PATCH v2 0/2] tty: serial: msm_serial: Fix lockup issues
 2019-12-04 16:13 UTC  (8+ messages)
` [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
` [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output

[PATCH v2 28/28] drm/msm: Use drm_bridge_init()
 2019-12-04 11:48 UTC 

[PATCH 0/2] Some improvements for Qualcomm hwspinlock
 2019-12-04  9:21 UTC  (3+ messages)
` [PATCH 1/2] hwspinlock: qcom: Remove redundant PM runtime functions
` [PATCH 2/2] hwspinlock: qcom: Use devm_hwspin_lock_register() to register hwlock controller

[PATCH] arm64: dts: qcom: sc7180: Make MSA memory fixed for wifi
 2019-12-04  9:20 UTC 

[PATCH v1] arm64: dts: sc7180: Add cpufreq HW node for cpu scaling
 2019-12-04  9:08 UTC 

[PATCH] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
 2019-12-04  8:48 UTC 

[PATCH v1 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
 2019-12-04  8:22 UTC  (3+ messages)
` [PATCH v1 2/3] dt-bindings: clock: Introduce QCOM Modem "
` [PATCH v1 3/3] clk: qcom: Add modem clock controller driver for SC7180

[PATCH v1 0/3] Add modem Clock controller (MSS CC) driver for SC7180
 2019-12-04  8:21 UTC 

[PATCH] drm/msm/a6xx: Fix a typo in an error message
 2019-12-04  6:02 UTC 

[PATCH v1] drm/msm: add support for 2.4.1 DSI version for sc7180 soc
 2019-12-03 22:34 UTC  (4+ messages)

[PATCH 08/16] dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
 2019-12-03 22:02 UTC  (4+ messages)
` [PATCH 10/16] dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support

[PATCH 2/6] dt-bindings: power: Add rpmh power-domain bindings for SM8150
 2019-12-03 21:55 UTC  (4+ messages)
` [PATCH 4/6] dt-bindings: power: Add rpmh power-domain bindings for sc7180

[PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
 2019-12-03 21:52 UTC 

[PATCH 0/2] Rename LLCC cache-controller to system-cache-controller
 2019-12-03 17:22 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: msm: Rename "

[PATCH v2 0/8] Add GPU & Video Clock controller driver for SC7180
 2019-12-03 17:22 UTC  (7+ messages)
` [PATCH v2 3/8] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
` [PATCH v2 7/8] dt-bindings: clock: Introduce QCOM Video "

[PATCH v1 0/3] Add display clock controller driver for SC7180
 2019-12-03 17:19 UTC  (5+ messages)
` [PATCH v1 1/3] dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings
` [PATCH v1 2/3] dt-bindings: clock: Introduce QCOM Display "

[PATCH v3 0/7]Introduce Power domain based warming device driver
 2019-12-03 17:11 UTC  (5+ messages)
` [PATCH v3 3/7] thermal: core: Add late init hook to cooling device ops

[PATCH] arm: dts: sc7180: Add A618 gpu dt blob
 2019-12-03 15:17 UTC 

[PATCH 0/5] Add support for A618 GPU
 2019-12-03 15:16 UTC 

[PATCH 1/5] drm: msm: Add 618 gpu to the adreno gpu list
 2019-12-03 15:06 UTC  (5+ messages)
` [PATCH 2/5] drm: msm: a6xx: Add support for A618
` [PATCH 3/5] drm: msm: a6xx: Dump GBIF registers, debugbus in gpu state
` [PATCH 4/5] drm: msm: a6xx: fix debug bus register configuration
` [PATCH 5/5] arm: dts: sc7180: Add A618 gpu dt blob

[PATCH 0/5] Add support for A618 GPU
 2019-12-03 15:06 UTC 

[PATCH] drm/msm/mdp5: enable autocommit
 2019-12-03 14:18 UTC  (5+ messages)

[PATCH v2 0/9] thermal: tsens: Handle critical interrupts
 2019-12-03  5:23 UTC  (10+ messages)
` [PATCH v2 1/9] drivers: thermal: tsens: De-constify struct tsens_features
` [PATCH v2 2/9] drivers: thermal: tsens: Pass around struct tsens_sensor as a constant
` [PATCH v2 3/9] drivers: thermal: tsens: use simpler variables
` [PATCH v2 4/9] drivers: thermal: tsens: Release device in success path
` [PATCH v2 5/9] drivers: thermal: tsens: Add critical interrupt support
` [PATCH v2 6/9] drivers: thermal: tsens: Add watchdog support
` [PATCH v2 7/9] arm64: dts: sdm845: thermal: Add critical interrupt support
` [PATCH v2 8/9] arm64: dts: msm8996: "
` [PATCH v2 9/9] arm64: dts: msm8998: "

[PATCH 0/3] thermal: tsens: Handle critical interrupts
 2019-12-03  5:02 UTC  (13+ messages)
` [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support
` [PATCH 2/3] drivers: thermal: tsens: Add watchdog support

[DPU PATCH v3 2/5] drm: add constant N value in helper file
 2019-12-02 18:59 UTC  (7+ messages)
` [DPU PATCH v3 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon 845
` [DPU PATCH v3 5/5] drm/msm/dpu: add display port support in DPU
` [DPU PATCH v3 4/5] drm/msm/dp: add support for DP PLL driver
  ` [DPU PATCH v3 3/5] drm/msm/dp: add displayPort driver support

[PATCH v2 1/5] interconnect: qcom: sdm845: Walk the list safely on node removal
 2019-12-02 17:40 UTC  (9+ messages)
` [PATCH v2 2/5] interconnect: qcom: qcs404: "
` [PATCH v2 3/5] interconnect: qcom: msm8974: "
` [PATCH v2 4/5] interconnect: Add a common helper for removing all nodes
` [PATCH v2 5/5] interconnect: qcom: Use the new common helper for node removal

[PATCH] rnndb: Add GBIF registers for a6xx GPU
 2019-12-02 17:24 UTC  (2+ messages)

[DPU PATCH v3 0/5] List of patches for DP drivers on SnapDragon
 2019-12-02 16:33 UTC 

[DPU PATCH v3 0/5] List of patches for DP drivers on SnapDragon
 2019-12-02 13:47 UTC 

[PATCH v7 0/5] Add support for QCOM Core Power Reduction
 2019-12-02  9:56 UTC  (7+ messages)
` [PATCH v7 1/5] dt-bindings: power: avs: Add support for CPR (Core Power Reduction)
` [PATCH v7 2/5] "
` [PATCH v7 3/5] arm64: dts: qcom: qcs404: Add CPR and populate OPP table
` [PATCH v7 4/5] arm64: defconfig: enable CONFIG_QCOM_CPR
` [PATCH v7 5/5] arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM

[PATCH 0/4] drm+dt+efi: support devices with multiple possible panels
 2019-11-30 18:39 UTC  (5+ messages)
` [PATCH 1/4] dt-bindings: chosen: document panel-id binding

[PATCH v1 0/2] Add suppport for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
 2019-11-29 16:48 UTC  (4+ messages)
` [PATCH v1 1/2] dt-bindings: display: add sc7180 panel variant
  ` [Freedreno] "
` [PATCH v1 2/2] drm/panel: add support for rm69299 visionox panel driver

[PATCH v3 0/1] Add USB related nodes for SC7180
 2019-11-28 22:11 UTC  (6+ messages)
` [PATCH v3 1/1] arm64: dts: qcom: sc7180: Add USB related nodes

[PATCH v3 00/13] cpuidle: psci: Support hierarchical CPU arrangement
 2019-11-28 22:04 UTC  (18+ messages)
` [PATCH v3 01/13] cpuidle: psci: Align psci_power_state count with idle state count
` [PATCH v3 02/13] dt: psci: Update DT bindings to support hierarchical PSCI states
` [PATCH v3 03/13] firmware: psci: Export functions to manage the OSI mode
` [PATCH v3 04/13] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
` [PATCH v3 05/13] cpuidle: dt: Support hierarchical CPU idle states
` [PATCH v3 06/13] cpuidle: psci: Simplify OF parsing of CPU idle state nodes
` [PATCH v3 07/13] cpuidle: psci: Support hierarchical CPU idle states
` [PATCH v3 08/13] cpuidle: psci: Add a helper to attach a CPU to its PM domain
` [PATCH v3 09/13] cpuidle: psci: Attach CPU devices to their PM domains
` [PATCH v3 10/13] cpuidle: psci: Prepare to use OS initiated suspend mode via "
` [PATCH v3 11/13] cpuidle: psci: Manage runtime PM in the idle path
` [PATCH v3 12/13] cpuidle: psci: Add support for PM domains by using genpd
` [PATCH v3 13/13] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916

[PATCH 1/5] interconnect: qcom: sdm845: Walk the list safely on node removal
 2019-11-28 18:20 UTC  (10+ messages)
` [PATCH 2/5] interconnect: qcom: qcs404: "
` [PATCH 3/5] interconnect: qcom: msm8974: "
` [PATCH 4/5] interconnect: Add a common helper for removing all nodes
` [PATCH 5/5] interconnect: qcom: Use the new common helper for node removal

[PATCH v4 0/3] interconnect: Add basic tracepoints
 2019-11-28 18:08 UTC  (7+ messages)
` [PATCH v4 1/3] interconnect: Move internal structs into a separate file
` [PATCH v4 2/3] interconnect: Add a name to struct icc_path
` [PATCH v4 3/3] interconnect: Add basic tracepoints

[PATCH 1/2] interconnect: Add a common standard aggregate function
 2019-11-28 17:54 UTC  (6+ messages)
` [PATCH 2/2] interconnect: qcom: Use the "

[PATCH v2 0/3] Add USB DWC3 support for SC7180
 2019-11-28 11:33 UTC  (4+ messages)
` [PATCH v2 1/3] usb: dwc3: Add support for SC7180 SOC
` [PATCH v2 2/3] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
` [PATCH v2 3/3] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180

[PATCH v2 0/1] Add device node support for TSENS in SC7180
 2019-11-28  9:54 UTC  (2+ messages)
` [PATCH v2 1/1] arm64: dts: qcom: sc7180: "

[PATCH V3 00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil
 2019-11-27 15:12 UTC  (11+ messages)
` [PATCH V3 01/10] remoteproc: qcom: Add PRNG proxy clock
` [PATCH V3 02/10] remoteproc: qcom: Add secure PIL support
` [PATCH V3 03/10] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
` [PATCH V3 04/10] remoteproc: qcom: Add ssr subdevice identifier
` [PATCH V3 05/10] remoteproc: qcom: Update regmap offsets for halt register
` [PATCH V3 06/10] dt-bindings: clock: qcom: Add reset for WCSSAON
` [PATCH V3 07/10] clk: qcom: Add WCSSAON reset
` [PATCH V3 08/10] dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
` [PATCH V3 09/10] arm64: dts: Add support for scm on IPQ8074 SoCs
` [PATCH V3 10/10] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

[PATCH V2 00/12] remoteproc: qcom: q6v5-wcss: Add support for secure pil
 2019-11-27 15:03 UTC  (4+ messages)
` [PATCH V2 12/12] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

[PATCH] phy: qcom-qmp: Use the correct style for SPDX License Identifier
 2019-11-27 14:02 UTC 

[PATCH V1 2/2] arm64: dts: qcom: sc7180: Add nodes for eMMC and SD card
 2019-11-27 11:50 UTC 

[PATCH V1 1/2] dt-bindings: mmc: sdhci-msm: Add compatible string for sc7180
 2019-11-27 11:49 UTC 

[PATCH] msm:disp:dpu1: Fix core clk rate in display driver
 2019-11-27 10:16 UTC 

[PATCH] msm:disp:dpu1: add scaler support on SC7180 display
 2019-11-27 10:14 UTC 

[PATCH V1 1/2] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
 2019-11-27  9:01 UTC  (3+ messages)
` [PATCH V1 2/2] interconnect: qcom: Add SC7180 interconnect provider driver

[PATCH v3 2/2] interconnect: qcom: Add OSM L3 interconnect provider support
 2019-11-27  8:42 UTC  (3+ messages)

[PATCH] clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs
 2019-11-26 18:11 UTC  (2+ messages)

[PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
 2019-11-26 15:59 UTC  (3+ messages)

[PATCH V1 0/2] Add SC7180 interconnect provider driver
 2019-11-26 15:01 UTC 

[PATCH V7 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
 2019-11-26 12:21 UTC  (4+ messages)
` [PATCH V7 2/2] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP

[PATCH] mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
 2019-11-26 10:19 UTC 

[PATCH V7 0/2] Cleanup wakeup IRQ and move loopback to TIOCM_LOOP
 2019-11-25 15:08 UTC 

[PATCH v2 0/5] DTS changes to support cpufreq on QCS404
 2019-11-25 14:25 UTC  (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
` [PATCH v2 2/5] arm64: dts: qcom: qcs404: Add HFPLL node
` [PATCH v2 3/5] arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
` [PATCH v2 4/5] arm64: dts: qcom: qcs404: Add DVFS support
` [PATCH v2 5/5] arm64: defconfig: Enable HFPLL

[PATCH v3 0/7] Clock changes to support cpufreq on QCS404
 2019-11-25 13:59 UTC  (4+ messages)
` [PATCH v3 5/7] clk: qcom: hfpll: use clk_parent_data to specify the parent
` [PATCH v3 6/7] clk: qcom: apcs-msm8916: silently error out on EPROBE_DEFER
` [PATCH v3 7/7] clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent