Linux-BTRFS Archive on lore.kernel.org
 help / color / Atom feed
* Issues with btrfs send/receive with parents
@ 2019-06-10 23:56 Eric Mesa
  2019-06-11  1:10 ` Chris Murphy
  2019-06-11  1:11 ` Remi Gauvin
  0 siblings, 2 replies; 14+ messages in thread
From: Eric Mesa @ 2019-06-10 23:56 UTC (permalink / raw)
  To: linux-btrfs

[-- Attachment #1.1: Type: text/plain, Size: 5508 bytes --]

First of all, as per instruction on the wiki for the mailing list, you can 
find everything asked for from the "What information to provide when asking a 
support question" section is at the end of my email. Look for a series of ## 
to know when this info is located.

So, the setup is that I've got a system with 3 drives containing btrfs on them 
- SSDHome, NotHome, and Photos. Recently, I finally have a server in the 
basement with two btrfs drives - backups1 and backups2. It will, naturally, be 
used for backups. The whole reason I'm using btrfs is for this awesome ability 
that comes from snapshots and it not taking up too much space because of COW. 

When I did the btrfs send / receive for SSDHome it took 2.5 days to send 
~500GiB over a 1GBps cable to the 3GBps drive in the server. It also had the 
error: 
ERROR: failed to clone extents to ermesa/.cache/krunner/
bookmarkrunnerfirefoxfavdbfile.sqlite: Invalid argument

and took like 99% CPU according to top for the btrfs process. The subvols in 
NotHome, by contrast, took MUCH LESS time for the same amount of data. 

So I did a bunch of internet research and I found a thread on the mailing list 
that relinks can cause send to take a lot longer. And I didn't have autodefrag 
on SSDHome mount options in fstab, but had it in the other drives that dont' 
have a problem. So I ran btrfs fi defrag -v -r /home/ and it listed 5 
failures. But after that, I did send/receive again with SSDHome and it was SO 
MUCH BETTER! btrfs never (or almost never) took more than 2.5% of CPU for 
btrfs while it was running and it took just 18 hours to send the data over the 
same cables and to the same drive. 

So I thought I'd solved the problem. (Although at the cost of my snapshots 
taking up more space on the SSD) I was able to do a send/receive with the -p 
option so that the next time it went faster. Life was good. 

But then....

Here's a situation I am pretty consistently running into (but only with 
SSDHome - it works fine with the other drives so far....)

Let's say that snapshot A is a snapshot sent to the server without -p. It 
sends the entire 500GB for 18 hours. 

Then I do snapshot B. I send it with -p - takes 15 minutes or so depending on 
how much data I've added. 

Then I do snapshot C - and here I always get an error. 

And it always is something like:

ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-08_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file 
or directory

It always involves either .cache or .mozilla - the types of files that are 
constantly changing. 

It doesn't matter if I do a defrag before snapshot C followed by the sync 
command. It seems that for SSDHome I can only do one full snap send and then 
one parent send. 

Again, so far it seems to be working fine with the other drives which seems to 
suggest to me that it's maybe not the version of my kernel or btrfs progs or 
anything else. 

I've got the info below, but when I ran a scrub and a btrfs check everything 
came back fine. 

So any help you can give me here would be awesome because I'd prefer not to 
have to either always start from snapshot A (as time increases from A, each 
snap is going to take longer to send) and it's weird that it's only happening 
with that drive. 

#########################################################


uname -a : Linux supermario.mushroomkingdom 5.0.9-200.fc29.x86_64 #1 SMP Mon 
Apr 22 00:55:30 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

btrfs --version: btrfs-progs v4.20.2 


btrfs fi show:
Label: 'SSDHome'  uuid: 1080b060-4f1d-4b72-8544-ada43ec3cb54
        Total devices 1 FS bytes used 604.32GiB
        devid    1 size 931.51GiB used 805.05GiB path /dev/sdb1

Label: 'NotHome'  uuid: 09344d53-db1e-43d0-8e43-c41a5884e172
        Total devices 1 FS bytes used 2.57TiB
        devid    1 size 3.64TiB used 2.59TiB path /dev/sdc1

Label: 'Photos'  uuid: 27cc1330-c4e3-404f-98f6-f23becec76b5
        Total devices 2 FS bytes used 2.88TiB
        devid    1 size 5.46TiB used 2.88TiB path /dev/sdd
        devid    2 size 3.64TiB used 2.88TiB path /dev/sda1


btrfs fi df /home:
Data, single: total=788.01GiB, used=601.54GiB
System, single: total=36.00MiB, used=112.00KiB
Metadata, single: total=17.01GiB, used=2.78GiB
GlobalReserve, single: total=512.00MiB, used=0.00B

And dmesg.log is attached


Plus some additional information: 

btrfs scrub status /home/
scrub status for 1080b060-4f1d-4b72-8544-ada43ec3cb54
        scrub started at Wed Jun  5 18:51:01 2019 and finished after 00:30:30
        total bytes scrubbed: 586.34GiB with 0 errors



btrfs check --force (because even in single user mode, I couldn't unmount /
home - even though it's on its own drive):

Checking filesystem on /dev/sdb1
UUID: 1080b060-4f1d-4b72-8544-ada43ec3cb54
found 648822566912 bytes used, no error found
total csum bytes: 630493176
total tree bytes: 2977923072
total fs tree bytes: 2119663616
total extent tree bytes: 132972544
btree space waste bytes: 509661764
file data blocks allocated: 1882978136064
 referenced 1827744911360

And you can see some of the info from me trying to figure this out on the 
following reddit posts: https://www.reddit.com/r/btrfs/comments/byq7gr/
list_of_folders_to_exclude_from_btrfs_if_home_is/ and https://www.reddit.com/
r/btrfs/comments/bwh2wa/extremely_slow_sendreceive_and_errors_upon/




--
Eric Mesa

[-- Attachment #1.2: dmesg.log --]
[-- Type: text/x-log, Size: 78559 bytes --]

[    0.000000] Linux version 5.0.9-200.fc29.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 8.3.1 20190223 (Red Hat 8.3.1-2) (GCC)) #1 SMP Mon Apr 22 00:55:30 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=//vmlinuz-5.0.9-200.fc29.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 rd.driver.blacklist=nouveau single
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be863fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be864000-0x00000000bea3bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bea3c000-0x00000000bea45fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bea46000-0x00000000bee34fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bee35000-0x00000000bf159fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xb0494018-0xb04b4657] usable ==> usable
[    0.000000] e820: update [mem 0xb0494018-0xb04b4657] usable ==> usable
[    0.000000] e820: update [mem 0xb0483018-0xb0493057] usable ==> usable
[    0.000000] e820: update [mem 0xb0483018-0xb0493057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b0483017] usable
[    0.000000] reserve setup_data: [mem 0x00000000b0483018-0x00000000b0493057] usable
[    0.000000] reserve setup_data: [mem 0x00000000b0493058-0x00000000b0494017] usable
[    0.000000] reserve setup_data: [mem 0x00000000b0494018-0x00000000b04b4657] usable
[    0.000000] reserve setup_data: [mem 0x00000000b04b4658-0x00000000be863fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be864000-0x00000000bea3bfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bea3c000-0x00000000bea45fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000bea46000-0x00000000bee34fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bee35000-0x00000000bf159fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100001000-0x000000063effffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xbea3e000  ACPI 2.0=0xbea3e000  SMBIOS=0xf04c0  MPS=0xfd4b0 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-UD3P, BIOS F1 08/06/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3515.947 MHz processor
[    0.003115] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003116] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003122] last_pfn = 0x63f000 max_arch_pfn = 0x400000000
[    0.003126] MTRR default type: uncachable
[    0.003127] MTRR fixed ranges enabled:
[    0.003128]   00000-9FFFF write-back
[    0.003129]   A0000-BFFFF write-through
[    0.003129]   C0000-CFFFF write-protect
[    0.003130]   D0000-DFFFF uncachable
[    0.003131]   E0000-FFFFF write-protect
[    0.003131] MTRR variable ranges enabled:
[    0.003132]   0 base 000000000000 mask FFFF80000000 write-back
[    0.003134]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.003135]   2 base 0000BF800000 mask FFFFFF800000 uncachable
[    0.003135]   3 disabled
[    0.003136]   4 disabled
[    0.003136]   5 disabled
[    0.003137]   6 disabled
[    0.003137]   7 disabled
[    0.003138] TOM2: 000000063f000000 aka 25584M
[    0.004148] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004207] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.004212] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.008387] found SMP MP-table at [mem 0x000fd810-0x000fd81f]
[    0.008410] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.008413] Using GB pages for direct mapping
[    0.008415] BRK [0x51e001000, 0x51e001fff] PGTABLE
[    0.008417] BRK [0x51e002000, 0x51e002fff] PGTABLE
[    0.008418] BRK [0x51e003000, 0x51e003fff] PGTABLE
[    0.008490] BRK [0x51e004000, 0x51e004fff] PGTABLE
[    0.008492] BRK [0x51e005000, 0x51e005fff] PGTABLE
[    0.008880] BRK [0x51e006000, 0x51e006fff] PGTABLE
[    0.008947] BRK [0x51e007000, 0x51e007fff] PGTABLE
[    0.009057] BRK [0x51e008000, 0x51e008fff] PGTABLE
[    0.009137] BRK [0x51e009000, 0x51e009fff] PGTABLE
[    0.009476] RAMDISK: [mem 0x5c8bf000-0x5dfd3fff]
[    0.009504] ACPI: Early table checksum verification disabled
[    0.009507] ACPI: RSDP 0x00000000BEA3E000 000024 (v02 ALASKA)
[    0.009509] ACPI: XSDT 0x00000000BEA3E070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009514] ACPI: FACP 0x00000000BEA43BA0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.009517] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-624)
[    0.009521] ACPI: DSDT 0x00000000BEA3E158 005A42 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.009523] ACPI: FACS 0x00000000BEE2FF80 000040
[    0.009525] ACPI: APIC 0x00000000BEA43C98 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.009528] ACPI: FPDT 0x00000000BEA43D38 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009530] ACPI: MCFG 0x00000000BEA43D80 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.009532] ACPI: HPET 0x00000000BEA43DC0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.009534] ACPI: BGRT 0x00000000BEA43DF8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.009536] ACPI: SSDT 0x00000000BEA43E30 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.009544] ACPI: Local APIC address 0xfee00000
[    0.009865] No NUMA configuration found
[    0.009866] Faking a node at [mem 0x0000000000000000-0x000000063effffff]
[    0.009877] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff]
[    0.085453] Zone ranges:
[    0.085455]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.085456]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.085457]   Normal   [mem 0x0000000100000000-0x000000063effffff]
[    0.085458]   Device   empty
[    0.085459] Movable zone start for each node
[    0.085462] Early memory node ranges
[    0.085463]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.085463]   node   0: [mem 0x0000000000100000-0x00000000be863fff]
[    0.085464]   node   0: [mem 0x00000000bf15a000-0x00000000bf15afff]
[    0.085464]   node   0: [mem 0x00000000bf361000-0x00000000bf7fffff]
[    0.085465]   node   0: [mem 0x0000000100001000-0x000000063effffff]
[    0.085544] Zeroed struct page in unavailable ranges: 4958 pages
[    0.085545] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff]
[    0.085547] On node 0 totalpages: 6282402
[    0.085548]   DMA zone: 64 pages used for memmap
[    0.085548]   DMA zone: 24 pages reserved
[    0.085549]   DMA zone: 3999 pages, LIFO batch:0
[    0.085642]   DMA32 zone: 12149 pages used for memmap
[    0.085643]   DMA32 zone: 777476 pages, LIFO batch:63
[    0.104390]   Normal zone: 85952 pages used for memmap
[    0.104392]   Normal zone: 5500927 pages, LIFO batch:63
[    0.229609] ACPI: PM-Timer IO Port: 0x808
[    0.229612] ACPI: Local APIC address 0xfee00000
[    0.229619] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.229626] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.229628] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.229629] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.229631] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.229632] ACPI: IRQ0 used by override.
[    0.229632] ACPI: IRQ9 used by override.
[    0.229634] Using ACPI (MADT) for SMP configuration information
[    0.229635] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.229645] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.229663] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.229665] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.229666] PM: Registered nosave memory: [mem 0xb0483000-0xb0483fff]
[    0.229668] PM: Registered nosave memory: [mem 0xb0493000-0xb0493fff]
[    0.229668] PM: Registered nosave memory: [mem 0xb0494000-0xb0494fff]
[    0.229669] PM: Registered nosave memory: [mem 0xb04b4000-0xb04b4fff]
[    0.229671] PM: Registered nosave memory: [mem 0xbe864000-0xbea3bfff]
[    0.229671] PM: Registered nosave memory: [mem 0xbea3c000-0xbea45fff]
[    0.229672] PM: Registered nosave memory: [mem 0xbea46000-0xbee34fff]
[    0.229672] PM: Registered nosave memory: [mem 0xbee35000-0xbf159fff]
[    0.229674] PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
[    0.229675] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[    0.229676] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.229676] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.229676] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.229677] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.229677] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.229678] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.229678] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.229679] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.229679] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.229680] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.229680] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.229681] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.229681] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.229682] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.229682] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.229683] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.229684] [mem 0xbf800000-0xf7ffffff] available for PCI devices
[    0.229685] Booting paravirtualized kernel on bare hardware
[    0.229688] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.350676] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.351183] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[    0.351190] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.351191] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.351218] Built 1 zonelists, mobility grouping on.  Total pages: 6184213
[    0.351219] Policy zone: Normal
[    0.351220] Kernel command line: BOOT_IMAGE=//vmlinuz-5.0.9-200.fc29.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 rd.driver.blacklist=nouveau single
[    0.465411] Memory: 24429324K/25129608K available (12291K kernel code, 1523K rwdata, 4148K rodata, 2204K init, 4688K bss, 700284K reserved, 0K cma-reserved)
[    0.465551] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.465557] ftrace: allocating 39080 entries in 153 pages
[    0.483625] rcu: Hierarchical RCU implementation.
[    0.483626] rcu: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[    0.483626] 	Tasks RCU enabled.
[    0.483627] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.483628] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.486272] NR_IRQS: 65792, nr_irqs: 1032, preallocated irqs: 16
[    0.486565] Console: colour dummy device 80x25
[    0.486569] printk: console [tty0] enabled
[    0.486583] ACPI: Core revision 20181213
[    0.486726] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.486734] hpet clockevent registered
[    0.486737] APIC: Switch to symmetric I/O mode setup
[    0.487325] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.491738] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32ae29645e6, max_idle_ns: 440795275062 ns
[    0.491747] Calibrating delay loop (skipped), value calculated using timer frequency.. 7031.89 BogoMIPS (lpj=3515947)
[    0.491749] pid_max: default: 32768 minimum: 301
[    0.499200] LSM: Security Framework initializing
[    0.499201] Yama: becoming mindful.
[    0.499205] SELinux:  Initializing.
[    0.506331] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.510021] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.510152] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.510265] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.510477] mce: CPU supports 7 MCE banks
[    0.510485] LVT offset 1 assigned for vector 0xf9
[    0.510489] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.510490] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.510492] Spectre V2 : Mitigation: Full AMD retpoline
[    0.510492] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.510498] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.510499] Spectre V2 : User space: Vulnerable
[    0.510500] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.510661] Freeing SMP alternatives memory: 36K
[    0.512739] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.512739] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.512739] ... version:                0
[    0.512739] ... bit width:              48
[    0.512739] ... generic registers:      6
[    0.512739] ... value mask:             0000ffffffffffff
[    0.512739] ... max period:             00007fffffffffff
[    0.512739] ... fixed-purpose events:   0
[    0.512739] ... event mask:             000000000000003f
[    0.512739] rcu: Hierarchical SRCU implementation.
[    0.512739] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.512739] smp: Bringing up secondary CPUs ...
[    0.512739] x86: Booting SMP configuration:
[    0.512739] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.539784] smp: Brought up 1 node, 8 CPUs
[    0.539784] smpboot: Max logical packages: 1
[    0.539784] smpboot: Total of 8 processors activated (56255.15 BogoMIPS)
[    0.542242] devtmpfs: initialized
[    0.542242] x86/mm: Memory block size: 128MB
[    0.544192] PM: Registering ACPI NVS region [mem 0xbea46000-0xbee34fff] (4124672 bytes)
[    0.544192] PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
[    0.544192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.544192] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.544192] pinctrl core: initialized pinctrl subsystem
[    0.544192] RTC time: 23:21:45, date: 2019-06-10
[    0.544798] NET: Registered protocol family 16
[    0.544905] audit: initializing netlink subsys (disabled)
[    0.544910] audit: type=2000 audit(1560208905.058:1): state=initialized audit_enabled=0 res=1
[    0.544910] cpuidle: using governor menu
[    0.544910] ACPI: bus type PCI registered
[    0.544910] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.544910] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.544910] PCI: not using MMCONFIG
[    0.544910] PCI: Using configuration type 1 for base access
[    0.544910] PCI: Using configuration type 1 for extended access
[    0.547297] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.547297] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.547297] cryptd: max_cpu_qlen set to 1000
[    0.547297] ACPI: Added _OSI(Module Device)
[    0.547297] ACPI: Added _OSI(Processor Device)
[    0.547297] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.547297] ACPI: Added _OSI(Processor Aggregator Device)
[    0.547297] ACPI: Added _OSI(Linux-Dell-Video)
[    0.547297] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.547297] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.550751] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.551846] ACPI: Interpreter enabled
[    0.551863] ACPI: (supports S0 S3 S4 S5)
[    0.551863] ACPI: Using IOAPIC for interrupt routing
[    0.551977] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.552009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.552021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.552230] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.557337] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.557341] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.557344] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.557613] PCI host bridge to bus 0000:00
[    0.557616] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.557617] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.557618] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.557619] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.557621] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.557622] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.557623] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.557625] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.557633] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.557745] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.557762] pci 0000:00:02.0: enabling Extended Tags
[    0.557783] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.557859] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.557874] pci 0000:00:04.0: enabling Extended Tags
[    0.557895] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.557970] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.557986] pci 0000:00:09.0: enabling Extended Tags
[    0.558006] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.558091] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.558107] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.558114] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.558120] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.558127] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.558134] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.558141] pci 0000:00:11.0: reg 0x24: [mem 0xfe30b000-0xfe30b3ff]
[    0.558235] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.558248] pci 0000:00:12.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
[    0.558356] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.558371] pci 0000:00:12.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
[    0.558430] pci 0000:00:12.2: supports D1 D2
[    0.558431] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.558508] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.558522] pci 0000:00:13.0: reg 0x10: [mem 0xfe308000-0xfe308fff]
[    0.558629] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.558645] pci 0000:00:13.2: reg 0x10: [mem 0xfe307000-0xfe3070ff]
[    0.558703] pci 0000:00:13.2: supports D1 D2
[    0.558704] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.558784] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.558902] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.558915] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.558922] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.558929] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.558935] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.558942] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.558957] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.558958] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.558959] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.558960] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.559030] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.559048] pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
[    0.559097] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.559166] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.559280] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.559373] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.559386] pci 0000:00:14.5: reg 0x10: [mem 0xfe306000-0xfe306fff]
[    0.559524] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.559537] pci 0000:00:16.0: reg 0x10: [mem 0xfe305000-0xfe305fff]
[    0.559645] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.559660] pci 0000:00:16.2: reg 0x10: [mem 0xfe304000-0xfe3040ff]
[    0.559719] pci 0000:00:16.2: supports D1 D2
[    0.559720] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.559796] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.559864] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.559931] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.559995] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.560063] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.560128] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.560229] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[    0.560248] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.560258] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.560268] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.560274] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.560281] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[    0.560286] pci 0000:01:00.0: enabling Extended Tags
[    0.560296] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.560362] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.560398] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[    0.560411] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[    0.560440] pci 0000:01:00.1: enabling Extended Tags
[    0.560524] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.562759] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.562762] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.562764] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.562767] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.562804] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[    0.562820] pci 0000:02:00.0: reg 0x10: [mem 0xfe200000-0xfe200fff 64bit]
[    0.562877] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.565751] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.565755] pci 0000:00:04.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.565802] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.565823] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.565841] pci 0000:03:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
[    0.565853] pci 0000:03:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.565921] pci 0000:03:00.0: supports D1 D2
[    0.565922] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.568756] pci 0000:00:09.0: PCI bridge to [bus 03]
[    0.568759] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.568761] pci 0000:00:09.0:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.568764] pci 0000:00:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.568775] pci_bus 0000:04: extended config space not accessible
[    0.568826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.568832] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.568833] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.568834] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.568836] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.568837] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.568838] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.568839] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.569214] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.569268] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.569323] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.569378] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.569422] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[    0.569457] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[    0.569493] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[    0.569528] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[    0.569758] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.569758] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.569758] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.569758] vgaarb: loaded
[    0.569845] SCSI subsystem initialized
[    0.569866] libata version 3.00 loaded.
[    0.569866] ACPI: bus type USB registered
[    0.569866] usbcore: registered new interface driver usbfs
[    0.569866] usbcore: registered new interface driver hub
[    0.569866] usbcore: registered new device driver usb
[    0.569866] pps_core: LinuxPPS API ver. 1 registered
[    0.569866] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.569866] PTP clock support registered
[    0.569869] EDAC MC: Ver: 3.0.0
[    0.569869] Registered efivars operations
[    0.575811] PCI: Using ACPI for IRQ routing
[    0.581996] PCI: pci_cache_line_size set to 64 bytes
[    0.582042] e820: reserve RAM buffer [mem 0xb0483018-0xb3ffffff]
[    0.582044] e820: reserve RAM buffer [mem 0xb0494018-0xb3ffffff]
[    0.582044] e820: reserve RAM buffer [mem 0xbe864000-0xbfffffff]
[    0.582045] e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
[    0.582046] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.582047] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff]
[    0.582740] NetLabel: Initializing
[    0.582740] NetLabel:  domain hash size = 128
[    0.582740] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.582740] NetLabel:  unlabeled traffic allowed by default
[    0.582815] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.582817] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.584792] clocksource: Switched to clocksource tsc-early
[    0.600022] VFS: Disk quotas dquot_6.6.0
[    0.600036] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.600091] pnp: PnP ACPI init
[    0.600204] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.600208] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.600430] system 00:01: [io  0x040b] has been reserved
[    0.600431] system 00:01: [io  0x04d6] has been reserved
[    0.600433] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.600434] system 00:01: [io  0x0c14] has been reserved
[    0.600435] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.600436] system 00:01: [io  0x0c52] has been reserved
[    0.600438] system 00:01: [io  0x0c6c] has been reserved
[    0.600440] system 00:01: [io  0x0c6f] has been reserved
[    0.600442] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.600443] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.600445] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.600446] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.600447] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.600449] system 00:01: [io  0x0800-0x089f] has been reserved
[    0.600450] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.600451] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.600452] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.600454] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.600456] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.600458] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.600459] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.600461] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.600462] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.600464] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.600466] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    0.600469] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.600603] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.600605] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.600606] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.600609] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.600825] pnp 00:03: [dma 0 disabled]
[    0.600863] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.600883] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.600934] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.600938] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.600972] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601077] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601166] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.601169] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601259] pnp: PnP ACPI: found 9 devices
[    0.607495] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.607532] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.607534] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.607536] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.607538] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.607541] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.607543] pci 0000:00:04.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.607546] pci 0000:00:09.0: PCI bridge to [bus 03]
[    0.607547] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.607549] pci 0000:00:09.0:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.607551] pci 0000:00:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.607554] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.607563] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.607564] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.607566] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.607567] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.607568] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.607569] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.607570] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.607572] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.607573] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.607574] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.607576] pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.607581] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.607582] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.607583] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.607584] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.607586] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.607587] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.607588] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.607589] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.607590] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.607591] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.607645] NET: Registered protocol family 2
[    0.607803] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.607941] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.608465] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.608697] TCP: Hash tables configured (established 262144 bind 65536)
[    0.608764] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.608898] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.609059] NET: Registered protocol family 1
[    0.609064] NET: Registered protocol family 44
[    0.638239] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a7 took 28471 usecs
[    0.661258] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a7 took 22373 usecs
[    0.684227] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a7 took 22318 usecs
[    0.707225] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6a7 took 22451 usecs
[    0.707374] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.707386] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.707522] PCI: CLS 64 bytes, default 64
[    0.707559] Unpacking initramfs...
[    1.036855] Freeing initrd memory: 23636K
[    1.036869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.036870] software IO TLB: mapped [mem 0xac482000-0xb0482000] (64MB)
[    1.036944] amd_uncore: AMD NB counters detected
[    1.037088] LVT offset 0 assigned for vector 0x400
[    1.037154] perf: AMD IBS detected (0x000000ff)
[    1.039459] Initialise system trusted keyrings
[    1.039469] Key type blacklist registered
[    1.039513] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    1.041002] zbud: loaded
[    1.041734] Platform Keyring initialized
[    1.221195] alg: No test for 842 (842-generic)
[    1.222068] alg: No test for 842 (842-scomp)
[    1.247173] NET: Registered protocol family 38
[    1.247176] Key type asymmetric registered
[    1.247177] Asymmetric key parser 'x509' registered
[    1.247190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.247239] io scheduler mq-deadline registered
[    1.247240] io scheduler kyber registered
[    1.247286] io scheduler bfq registered
[    1.247401] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.247758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.247779] efifb: probing for efifb
[    1.247791] efifb: showing boot graphics
[    1.248886] efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
[    1.248887] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.248887] efifb: scrolling: redraw
[    1.248888] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.248930] fbcon: Deferring console take-over
[    1.248931] fb0: EFI VGA frame buffer device
[    1.249010] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.249033] ACPI: Power Button [PWRB]
[    1.249081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.249097] ACPI: Power Button [PWRF]
[    1.249985] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.270530] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.272106] Non-volatile memory driver v1.3
[    1.272138] Linux agpgart interface v0.103
[    1.273085] ahci 0000:00:11.0: version 3.0
[    1.273214] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.273217] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.273661] scsi host0: ahci
[    1.273863] scsi host1: ahci
[    1.273980] scsi host2: ahci
[    1.274092] scsi host3: ahci
[    1.274155] ata1: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b100 irq 19
[    1.274157] ata2: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b180 irq 19
[    1.274158] ata3: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b200 irq 19
[    1.274160] ata4: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b280 irq 19
[    1.274254] libphy: Fixed MDIO Bus: probed
[    1.274339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.274341] ehci-pci: EHCI PCI platform driver
[    1.274423] QUIRK: Enable AMD PLL fix
[    1.274437] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.274475] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.274478] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.274485] ehci-pci 0000:00:12.2: debug port 1
[    1.274517] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe309000
[    1.281396] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.281452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.281454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.281455] usb usb1: Product: EHCI Host Controller
[    1.281456] usb usb1: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ehci_hcd
[    1.281457] usb usb1: SerialNumber: 0000:00:12.2
[    1.281557] hub 1-0:1.0: USB hub found
[    1.281563] hub 1-0:1.0: 5 ports detected
[    1.281828] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.281862] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.281865] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.281872] ehci-pci 0000:00:13.2: debug port 1
[    1.281893] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe307000
[    1.288396] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.288452] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.288454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.288455] usb usb2: Product: EHCI Host Controller
[    1.288456] usb usb2: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ehci_hcd
[    1.288457] usb usb2: SerialNumber: 0000:00:13.2
[    1.288545] hub 2-0:1.0: USB hub found
[    1.288550] hub 2-0:1.0: 5 ports detected
[    1.288809] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.288843] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.288845] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.288852] ehci-pci 0000:00:16.2: debug port 1
[    1.288873] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe304000
[    1.295412] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.295487] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.295489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.295490] usb usb3: Product: EHCI Host Controller
[    1.295491] usb usb3: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ehci_hcd
[    1.295492] usb usb3: SerialNumber: 0000:00:16.2
[    1.295582] hub 3-0:1.0: USB hub found
[    1.295588] hub 3-0:1.0: 4 ports detected
[    1.295773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.295778] ohci-pci: OHCI PCI platform driver
[    1.295864] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.295899] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.295918] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30a000
[    1.351470] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.351472] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.351473] usb usb4: Product: OHCI PCI host controller
[    1.351474] usb usb4: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ohci_hcd
[    1.351475] usb usb4: SerialNumber: 0000:00:12.0
[    1.351579] hub 4-0:1.0: USB hub found
[    1.351586] hub 4-0:1.0: 5 ports detected
[    1.351821] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.351856] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.351871] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe308000
[    1.407450] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.407452] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.407453] usb usb5: Product: OHCI PCI host controller
[    1.407454] usb usb5: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ohci_hcd
[    1.407454] usb usb5: SerialNumber: 0000:00:13.0
[    1.407551] hub 5-0:1.0: USB hub found
[    1.407559] hub 5-0:1.0: 5 ports detected
[    1.407800] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.407837] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.407853] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe306000
[    1.463463] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.463465] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.463466] usb usb6: Product: OHCI PCI host controller
[    1.463467] usb usb6: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ohci_hcd
[    1.463468] usb usb6: SerialNumber: 0000:00:14.5
[    1.463570] hub 6-0:1.0: USB hub found
[    1.463577] hub 6-0:1.0: 2 ports detected
[    1.463783] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.463822] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.463838] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe305000
[    1.519436] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.519438] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.519439] usb usb7: Product: OHCI PCI host controller
[    1.519440] usb usb7: Manufacturer: Linux 5.0.9-200.fc29.x86_64 ohci_hcd
[    1.519441] usb usb7: SerialNumber: 0000:00:16.0
[    1.519546] hub 7-0:1.0: USB hub found
[    1.519553] hub 7-0:1.0: 4 ports detected
[    1.519713] uhci_hcd: USB Universal Host Controller Interface driver
[    1.519804] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.519839] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    1.519900] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000090
[    1.520025] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.520026] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.520027] usb usb8: Product: xHCI Host Controller
[    1.520028] usb usb8: Manufacturer: Linux 5.0.9-200.fc29.x86_64 xhci-hcd
[    1.520029] usb usb8: SerialNumber: 0000:02:00.0
[    1.520103] hub 8-0:1.0: USB hub found
[    1.520109] hub 8-0:1.0: 1 port detected
[    1.520179] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.520216] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    1.520219] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    1.520232] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.520252] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    1.520254] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.520255] usb usb9: Product: xHCI Host Controller
[    1.520256] usb usb9: Manufacturer: Linux 5.0.9-200.fc29.x86_64 xhci-hcd
[    1.520257] usb usb9: SerialNumber: 0000:02:00.0
[    1.520328] hub 9-0:1.0: USB hub found
[    1.520335] hub 9-0:1.0: 4 ports detected
[    1.520464] usbcore: registered new interface driver usbserial_generic
[    1.520469] usbserial: USB Serial support registered for generic
[    1.520491] i8042: PNP: No PS/2 controller found.
[    1.520526] mousedev: PS/2 mouse device common for all mice
[    1.520620] rtc_cmos 00:04: RTC can wake from S4
[    1.520725] rtc_cmos 00:04: registered as rtc0
[    1.520726] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.520805] device-mapper: uevent: version 1.0.3
[    1.520858] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.521115] hidraw: raw HID events driver (C) Jiri Kosina
[    1.521148] usbcore: registered new interface driver usbhid
[    1.521148] usbhid: USB HID core driver
[    1.521230] drop_monitor: Initializing network drop monitor service
[    1.521338] Initializing XFRM netlink socket
[    1.521445] NET: Registered protocol family 10
[    1.524450] Segment Routing with IPv6
[    1.524467] mip6: Mobile IPv6
[    1.524469] NET: Registered protocol family 17
[    1.524968] RAS: Correctable Errors collector initialized.
[    1.524972] microcode: microcode updated early to new patch_level=0x06000852
[    1.524991] microcode: CPU0: patch_level=0x06000852
[    1.525025] microcode: CPU1: patch_level=0x06000852
[    1.525032] microcode: CPU2: patch_level=0x06000852
[    1.525038] microcode: CPU3: patch_level=0x06000852
[    1.525046] microcode: CPU4: patch_level=0x06000852
[    1.525051] microcode: CPU5: patch_level=0x06000852
[    1.525058] microcode: CPU6: patch_level=0x06000852
[    1.525064] microcode: CPU7: patch_level=0x06000852
[    1.525092] microcode: Microcode Update Driver: v2.2.
[    1.525100] AVX version of gcm_enc/dec engaged.
[    1.525101] AES CTR mode by8 optimization enabled
[    1.553252] sched_clock: Marking stable (1553047059, 199567)->(1681544884, -128298258)
[    1.553519] registered taskstats version 1
[    1.553526] Loading compiled-in X.509 certificates
[    1.561766] usb 2-5: new high-speed USB device number 2 using ehci-pci
[    1.592180] Loaded X.509 cert 'Fedora kernel signing key: 6f4b0dfe2ebeeac4fb22935af6b2fffa759129af'
[    1.592202] zswap: loaded using pool lzo/zbud
[    1.597702] Key type big_key registered
[    1.600545] Key type encrypted registered
[    1.600879] ima: No TPM chip found, activating TPM-bypass!
[    1.600884] ima: Allocated hash algorithm: sha1
[    1.600889] No architecture policies found
[    1.601164]   Magic number: 7:16:403
[    1.601319] rtc_cmos 00:04: setting system clock to 2019-06-10T23:21:46 UTC (1560208906)
[    1.692623] usb 2-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    1.692625] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.692626] usb 2-5: Product: USB 2.0 Hub
[    1.692889] hub 2-5:1.0: USB hub found
[    1.692995] hub 2-5:1.0: 4 ports detected
[    1.717849] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.717877] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.719488] ata4.00: ATA-8: HGST HDN724040ALE640, MJAOA5E0, max UDMA/133
[    1.719489] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.719706] ata1.00: ATAPI: HL-DT-ST BD-RE  WH14NS40, 1.00, max UDMA/133
[    1.720724] ata1.00: configured for UDMA/133
[    1.721162] ata4.00: configured for UDMA/133
[    1.725767] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.725816] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.726798] ata3.00: supports DRM functions and may not be fully accessible
[    1.726839] ata3.00: ATA-10: CT1000MX500SSD1, M3CR022, max UDMA/133
[    1.726842] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.727296] scsi 0:0:0:0: CD-ROM            HL-DT-ST BD-RE  WH14NS40  1.00 PQ: 0 ANSI: 5
[    1.727352] ata2.00: ATA-8: HGST HDN724040ALE640, MJAOA5E0, max UDMA/133
[    1.727358] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.727450] ata3.00: supports DRM functions and may not be fully accessible
[    1.727958] ata3.00: configured for UDMA/133
[    1.729054] ata2.00: configured for UDMA/133
[    1.744144] usb 9-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.763784] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.763785] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.764014] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.764146] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.764378] scsi 1:0:0:0: Direct-Access     ATA      HGST HDN724040AL A5E0 PQ: 0 ANSI: 5
[    1.764532] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.764569] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    1.764571] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.764585] sd 1:0:0:0: [sda] Write Protect is off
[    1.764586] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.764612] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.764706] scsi 2:0:0:0: Direct-Access     ATA      CT1000MX500SSD1  022  PQ: 0 ANSI: 5
[    1.764859] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.764926] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.764927] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.764942] sd 2:0:0:0: [sdb] Write Protect is off
[    1.764944] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.764971] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.765029] scsi 3:0:0:0: Direct-Access     ATA      HGST HDN724040AL A5E0 PQ: 0 ANSI: 5
[    1.765185] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.765215] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    1.765217] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    1.765229] sd 3:0:0:0: [sdc] Write Protect is off
[    1.765231] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.765251] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.766291]  sdb: sdb1
[    1.766813] sd 2:0:0:0: [sdb] supports TCG Opal
[    1.766815] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.805826] usb 7-4: new full-speed USB device number 2 using ohci-pci
[    1.817781]  sda: sda1
[    1.818247] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.831314]  sdc: sdc1
[    1.831768] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.833613] Freeing unused decrypted memory: 2040K
[    1.834166] Freeing unused kernel image memory: 2204K
[    1.839860] Write protecting the kernel read-only data: 20480k
[    1.840606] Freeing unused kernel image memory: 2020K
[    1.841154] Freeing unused kernel image memory: 1996K
[    1.849844] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.849848] rodata_test: all tests were successful
[    1.849855] Run /init as init process
[    1.872906] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.884972] systemd[1]: Detected architecture x86-64.
[    1.884979] systemd[1]: Running in initial RAM disk.
[    1.888376] systemd[1]: Set hostname to <supermario.mushroomkingdom>.
[    1.940108] random: systemd: uninitialized urandom read (16 bytes read)
[    1.940178] systemd[1]: Listening on udev Control Socket.
[    1.940216] random: systemd: uninitialized urandom read (16 bytes read)
[    1.940255] systemd[1]: Listening on udev Kernel Socket.
[    1.940263] random: systemd: uninitialized urandom read (16 bytes read)
[    1.940269] systemd[1]: Reached target Slices.
[    1.940347] systemd[1]: Listening on Journal Audit Socket.
[    1.940357] systemd[1]: Reached target Timers.
[    1.940367] systemd[1]: Reached target Local File Systems.
[    1.974421] usb 7-4: New USB device found, idVendor=057e, idProduct=0337, bcdDevice= 1.00
[    1.974423] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.974424] usb 7-4: Product: WUP-028
[    1.974426] usb 7-4: Manufacturer: Nintendo
[    1.974427] usb 7-4: SerialNumber: 15/07/2014
[    1.984108] hid-generic 0003:057E:0337.0001: hiddev96,hidraw0: USB HID v1.10 Device [Nintendo WUP-028] on usb-0000:00:16.0-4/input0
[    1.991514] usb 9-1: New USB device found, idVendor=2109, idProduct=0812, bcdDevice=90.91
[    1.991516] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.991517] usb 9-1: Product: USB3.0 Hub             
[    1.991518] usb 9-1: Manufacturer: VIA Labs, Inc.         
[    1.992112] hub 9-1:1.0: USB hub found
[    1.992282] hub 9-1:1.0: 4 ports detected
[    2.053754] tsc: Refined TSC clocksource calibration: 3516.079 MHz
[    2.053762] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32aea62f38f, max_idle_ns: 440795333041 ns
[    2.053785] clocksource: Switched to clocksource tsc
[    2.085762] usb 2-5.2: new low-speed USB device number 3 using ehci-pci
[    2.103751] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[    2.230912] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    2.230913] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.230915] usb 8-1: Product: USB2.0 Hub
[    2.231493] hub 8-1:1.0: USB hub found
[    2.231637] hub 8-1:1.0: 4 ports detected
[    2.280490] usb 2-5.2: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00
[    2.280492] usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.280493] usb 2-5.2: Product: USB Optical Mouse
[    2.280494] usb 2-5.2: Manufacturer: Logitech
[    2.282855] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.2/2-5.2:1.0/0003:046D:C05A.0002/input/input2
[    2.282947] hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.2-5.2/input0
[    2.365223] audit: type=1130 audit(1560208907.262:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.367027] usb 9-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    2.374471] audit: type=1130 audit(1560208907.272:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.381267] usb 9-1.1: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.19
[    2.381269] usb 9-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.381270] usb 9-1.1: Product: USB Storage
[    2.381271] usb 9-1.1: Manufacturer: Generic
[    2.381272] usb 9-1.1: SerialNumber: 000000000819
[    2.461808] usb 2-5.4: new low-speed USB device number 4 using ehci-pci
[    2.509808] usb 8-1.1: new high-speed USB device number 3 using xhci_hcd
[    2.537089] audit: type=1130 audit(1560208907.434:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.547722] usb-storage 9-1.1:1.0: USB Mass Storage device detected
[    2.547853] scsi host4: usb-storage 9-1.1:1.0
[    2.547947] usbcore: registered new interface driver usb-storage
[    2.550486] usbcore: registered new interface driver uas
[    2.588235] usb 8-1.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.90
[    2.588238] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.588240] usb 8-1.1: Product: USB2.0 Hub             
[    2.588241] usb 8-1.1: Manufacturer: VIA Labs, Inc.         
[    2.589721] hub 8-1.1:1.0: USB hub found
[    2.590030] hub 8-1.1:1.0: 4 ports detected
[    2.622652] audit: type=1130 audit(1560208907.519:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.638555] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.640816] libphy: r8169: probed
[    2.641224] audit: type=1130 audit(1560208907.538:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.641290] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, 74:d4:35:99:7c:2d, XID 2c9, IRQ 29
[    2.641292] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.641320] scsi host5: pata_atiixp
[    2.641591] scsi host6: pata_atiixp
[    2.641634] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.641635] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.641818] fbcon: Taking over console
[    2.641910] Console: switching to colour frame buffer device 128x48
[    2.656848] random: fast init done
[    2.663757] usb 8-1.3: new high-speed USB device number 4 using xhci_hcd
[    2.677140] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.678132] usb 2-5.4: New USB device found, idVendor=04f2, idProduct=0603, bcdDevice= 2.10
[    2.678134] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.678135] usb 2-5.4: Product: USB keyboard
[    2.678136] usb 2-5.4: Manufacturer: Chicony
[    2.687105] input: Chicony USB keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.4/2-5.4:1.0/0003:04F2:0603.0003/input/input3
[    2.739965] hid-generic 0003:04F2:0603.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony USB keyboard] on usb-0000:00:13.2-5.4/input0
[    2.743496] usb 8-1.3: New USB device found, idVendor=2080, idProduct=0001, bcdDevice= 3.22
[    2.743497] usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.743498] usb 8-1.3: Product: NOOK
[    2.743500] usb 8-1.3: Manufacturer: Linux 2.6.27-svn40739 with s3c-udc
[    2.743501] usb 8-1.3: SerialNumber: 372041756775
[    2.745267] usb-storage 8-1.3:1.0: USB Mass Storage device detected
[    2.745371] scsi host7: usb-storage 8-1.3:1.0
[    2.757813] input: Chicony USB keyboard System Control as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.4/2-5.4:1.1/0003:04F2:0603.0004/input/input4
[    2.810901] input: Chicony USB keyboard Consumer Control as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.4/2-5.4:1.1/0003:04F2:0603.0004/input/input5
[    2.810954] input: Chicony USB keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.4/2-5.4:1.1/0003:04F2:0603.0004/input/input7
[    2.811035] hid-generic 0003:04F2:0603.0004: input,hiddev97,hidraw3: USB HID v1.11 Device [Chicony USB keyboard] on usb-0000:00:13.2-5.4/input1
[    2.826317] ata5.00: ATA-9: HGST HDN726060ALE614, APGNW7JH, max UDMA/133
[    2.826322] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.828713] ata5.01: supports DRM functions and may not be fully accessible
[    2.828716] ata5.01: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    2.828717] ata5.01: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.829962] ata5.00: limited to UDMA/33 due to 40-wire cable
[    2.829963] ata5.01: limited to UDMA/33 due to 40-wire cable
[    2.837940] ata5.01: supports DRM functions and may not be fully accessible
[    2.839283] scsi 5:0:0:0: Direct-Access     ATA      HGST HDN726060AL W7JH PQ: 0 ANSI: 5
[    2.839514] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    2.839540] sd 5:0:0:0: [sdd] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    2.839543] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[    2.839573] sd 5:0:0:0: [sdd] Write Protect is off
[    2.839575] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.839603] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.839719] scsi 5:0:1:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.840051] sd 5:0:1:0: Attached scsi generic sg5 type 0
[    2.853898] sd 5:0:1:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.853991] sd 5:0:1:0: [sde] Write Protect is off
[    2.853993] sd 5:0:1:0: [sde] Mode Sense: 00 3a 00 00
[    2.854025] sd 5:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.854410] sd 5:0:0:0: [sdd] Attached SCSI disk
[    2.856441]  sde: sde1 sde2 sde3
[    2.857546] sd 5:0:1:0: [sde] supports TCG Opal
[    2.857548] sd 5:0:1:0: [sde] Attached SCSI disk
[    3.105497] random: crng init done
[    3.105499] random: 7 urandom warning(s) missed due to ratelimiting
[    3.231571] audit: type=1130 audit(1560208908.129:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.265299] audit: type=1130 audit(1560208908.162:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.283387] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.406361] audit: type=1130 audit(1560208908.303:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.406365] audit: type=1131 audit(1560208908.303:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.590479] scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0819 PQ: 0 ANSI: 6
[    3.590814] sd 4:0:0:0: Attached scsi generic sg6 type 0
[    3.591942] sd 4:0:0:0: [sdf] Attached SCSI removable disk
[    3.690804] systemd-journald[314]: Received SIGTERM from PID 1 (systemd).
[    3.716926] printk: systemd: 19 output lines suppressed due to ratelimiting
[    3.782362] scsi 7:0:0:0: Direct-Access     B&N      NOOK             0322 PQ: 0 ANSI: 2
[    3.782577] sd 7:0:0:0: Attached scsi generic sg7 type 0
[    3.782927] sd 7:0:0:0: Power-on or device reset occurred
[    3.783757] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[    4.184416] SELinux:  Class xdp_socket not defined in policy.
[    4.184417] SELinux: the above unknown classes and permissions will be allowed
[    4.184420] SELinux:  policy capability network_peer_controls=1
[    4.184421] SELinux:  policy capability open_perms=1
[    4.184421] SELinux:  policy capability extended_socket_class=1
[    4.184422] SELinux:  policy capability always_check_network=0
[    4.184422] SELinux:  policy capability cgroup_seclabel=1
[    4.184423] SELinux:  policy capability nnp_nosuid_transition=1
[    4.207772] systemd[1]: Successfully loaded SELinux policy in 379.142ms.
[    4.263852] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 37.933ms.
[    4.267674] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.279992] systemd[1]: Detected architecture x86-64.
[    4.281115] systemd[1]: Set hostname to <supermario.mushroomkingdom>.
[    4.589012] systemd[1]: Stopped Switch Root.
[    4.589253] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[    4.589288] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    4.589307] systemd[1]: Stopped Journal Service.
[    4.590504] systemd[1]: Starting Journal Service...
[    4.591661] systemd[1]: Mounting Huge Pages File System...
[    4.595663] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.611295] Adding 12386300k swap on /dev/mapper/fedora-swap.  Priority:-2 extents:1 across:12386300k SSFS
[    4.626102] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    4.984565] systemd-journald[688]: Received request to flush runtime journal from PID 1
[    5.308966] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.312539] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.312546] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    5.312894] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    5.347048] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.347203] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    5.347989] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.363416] IPMI message handler: version 39.2
[    5.366698] ipmi device interface
[    5.436395] raid6: using algorithm sse2x4 gen() 0 MB/s
[    5.436397] raid6: .... xor() 0 MB/s, rmw enabled
[    5.436398] raid6: using ssse3x2 recovery algorithm
[    5.449720] xor: automatically using best checksumming function   avx       
[    5.487307] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    5.487380] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.487389] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.509168] snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[    5.509171] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.509173] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[    5.509174] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    5.509175] snd_hda_codec_via hdaudioC0D0:    dig-out=0x2d/0x2e
[    5.509177] snd_hda_codec_via hdaudioC0D0:    inputs:
[    5.509178] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x29
[    5.509180] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x2b
[    5.509182] snd_hda_codec_via hdaudioC0D0:      Line=0x2a
[    5.531306] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    5.531409] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    5.531477] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    5.531564] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    5.531626] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    5.531691] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    5.531775] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    5.531866] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    5.560215] Btrfs loaded, crc32c=crc32c-intel
[    5.561152] BTRFS: device label SSDHome devid 1 transid 3033100 /dev/sdb1
[    5.561561] BTRFS: device label Photos devid 1 transid 326576 /dev/sdd
[    5.627879] kvm: Nested Virtualization enabled
[    5.627883] kvm: Nested Paging enabled
[    5.635109] MCE: In-kernel MCE decoding enabled.
[    5.639979] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.639981] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.741994] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[    5.742166] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[    5.742270] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[    5.765543] BTRFS: device label NotHome devid 1 transid 184019 /dev/sdc1
[    5.790767] BTRFS: device label Photos devid 2 transid 326576 /dev/sda1
[    5.899075] kauditd_printk_skb: 51 callbacks suppressed
[    5.899076] audit: type=1130 audit(1560208910.796:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:67 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.940730] audit: type=1130 audit(1560208910.837:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.245440] nvidia: loading out-of-tree module taints kernel.
[    6.245449] nvidia: module license 'NVIDIA' taints kernel.
[    6.245449] Disabling lock debugging due to kernel taint
[    6.256179] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    6.266996] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[    6.267432] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.467987] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  418.56  Fri Mar 15 12:59:26 CDT 2019
[    6.512293] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 234
[    6.549569] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  418.56  Fri Mar 15 12:32:40 CDT 2019
[    6.553409] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    6.553411] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    6.717436] audit: type=1130 audit(1560208911.614:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.886687] audit: type=1130 audit(1560208911.784:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.886719] audit: type=1131 audit(1560208911.784:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.921293] loop: module loaded
[    6.924200] audit: type=1130 audit(1560208911.821:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-1080b060\x2d4f1d\x2d4b72\x2d8544\x2dada43ec3cb54 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.924922] audit: type=1130 audit(1560208911.822:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-09344d53\x2ddb1e\x2d43d0\x2d8e43\x2dc41a5884e172 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.932901] BTRFS info (device sdc1): enabling auto defrag
[    6.932905] BTRFS info (device sdc1): disk space caching is enabled
[    6.932906] BTRFS info (device sdc1): has skinny extents
[    6.945451] audit: type=1130 audit(1560208911.842:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-27cc1330\x2dc4e3\x2d404f\x2d98f6\x2df23becec76b5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.949344] BTRFS info (device sdb1): enabling ssd optimizations
[    6.949347] BTRFS info (device sdb1): enabling auto defrag
[    6.949350] BTRFS info (device sdb1): disk space caching is enabled
[    6.949351] BTRFS info (device sdb1): has skinny extents
[    6.959766] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: user_xattr
[    6.961681] BTRFS info (device sdd): enabling auto defrag
[    6.961686] BTRFS info (device sdd): disk space caching is enabled
[    6.961688] BTRFS info (device sdd): has skinny extents
[    6.967395] audit: type=1130 audit(1560208911.864:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-F7B7\x2dFE7E comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.994979] audit: type=1130 audit(1560208911.892:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-ac23cfa4\x2df93d\x2d4fd8\x2db9a9\x2d11ee4bb84889 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.016231] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
[    9.616434] usb 8-1.3: USB disconnect, device number 4
[    9.826834] usb 8-1.3: new high-speed USB device number 5 using xhci_hcd
[    9.903714] usb 8-1.3: New USB device found, idVendor=2080, idProduct=0001, bcdDevice= 3.22
[    9.903719] usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.903722] usb 8-1.3: Product: NOOK
[    9.903725] usb 8-1.3: Manufacturer: Linux 2.6.27-svn40739 with s3c-udc
[    9.903727] usb 8-1.3: SerialNumber: 372041756775
[    9.906695] usb-storage 8-1.3:1.0: USB Mass Storage device detected
[    9.907006] scsi host7: usb-storage 8-1.3:1.0
[   10.950446] scsi 7:0:0:0: Direct-Access     B&N      NOOK             0322 PQ: 0 ANSI: 2
[   10.951110] sd 7:0:0:0: Attached scsi generic sg7 type 0
[   10.951161] sd 7:0:0:0: Power-on or device reset occurred
[   10.952880] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[   15.391085] audit: type=1130 audit(1560208920.289:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.403089] audit: type=1130 audit(1560208920.300:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.403098] audit: type=1131 audit(1560208920.300:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.474819] audit: type=1130 audit(1560208920.371:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.491780] audit: type=1127 audit(1560208920.389:76): pid=1060 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   15.498414] audit: type=1130 audit(1560208920.396:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.501014] audit: type=1130 audit(1560208920.398:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=alsa-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.503455] audit: type=1130 audit(1560208920.400:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=rescue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.518177] audit: type=1129 audit(1560208920.415:80): pid=1063 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='old-level=N new-level=1 comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   15.520002] audit: type=1130 audit(1560208920.418:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-update-utmp-runlevel comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  267.794434] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  272.838054] usb 9-1.1: device descriptor read/8, error -110
[  272.941832] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  277.958049] usb 9-1.1: device descriptor read/8, error -110
[  278.236339] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-10 23:56 Issues with btrfs send/receive with parents Eric Mesa
@ 2019-06-11  1:10 ` Chris Murphy
  2019-06-11  3:39   ` Andrei Borzenkov
  2019-06-11  3:47   ` Eric Mesa
  2019-06-11  1:11 ` Remi Gauvin
  1 sibling, 2 replies; 14+ messages in thread
From: Chris Murphy @ 2019-06-11  1:10 UTC (permalink / raw)
  To: Eric Mesa; +Cc: Btrfs BTRFS

On Mon, Jun 10, 2019 at 6:03 PM Eric Mesa <eric@ericmesa.com> wrote:

> When I did the btrfs send / receive for SSDHome it took 2.5 days to send
> ~500GiB over a 1GBps cable to the 3GBps drive in the server. It also had the
> error:
> ERROR: failed to clone extents to ermesa/.cache/krunner/
> bookmarkrunnerfirefoxfavdbfile.sqlite: Invalid argument

While there are distinct send and receive errors possible, I'm not
familiar with recognizing them. You can get a better idea what the
problem is with -vv or -vvv to get a more verbose error on the side
that's having the problem. My guess is this is a send error message.


>
> Let's say that snapshot A is a snapshot sent to the server without -p. It
> sends the entire 500GB for 18 hours.
>
> Then I do snapshot B. I send it with -p - takes 15 minutes or so depending on
> how much data I've added.
>
> Then I do snapshot C - and here I always get an error.

It's most useful if you show exact commands because actually it's not
always obvious to everyone what the logic should be and the error
handling doesn't always stop a user from doing something that doesn't
make a lot of sense. We need to know the name of the rw subvolume; the
command to snapshot it; the full send/receive command for that first
snapshot; the command for a subsequent snapshot; and the command to
incrementally send/receive it.




>
> And it always is something like:
>
> ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
> firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-08_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file
> or directory


>
> It always involves either .cache or .mozilla - the types of files that are
> constantly changing.
>
> It doesn't matter if I do a defrag before snapshot C followed by the sync
> command. It seems that for SSDHome I can only do one full snap send and then
> one parent send.

I don't actually know the status of snapshot aware defragmentation. It
wasn't there, then it was there, then there were problems, and I think
it was pulled rather than fixed. But I don't remember really. I also
don't know if there's a difference between manual defragging and
autodefrag, because I don't use either one. I do use reflinks. And I
have done deduplication. And I don't have any send/receive failures. I
do sometimes see slow sections of send/receive.



>
> Again, so far it seems to be working fine with the other drives which seems to
> suggest to me that it's maybe not the version of my kernel or btrfs progs or
> anything else.

Do you remember the mkfs command for this file system? Or also helpful would be:

# btrfs insp dump-s -f /dev/X  ## for both send and receive side file
system (only one device from each Btrfs volume is needed), this will
give us an idea what the mkfs options were including feature flags.

> And dmesg.log is attached

[    6.949347] BTRFS info (device sdb1): enabling auto defrag

Could be related. And then also

[    9.906695] usb-storage 8-1.3:1.0: USB Mass Storage device detected
[    9.907006] scsi host7: usb-storage 8-1.3:1.0
[   10.950446] scsi 7:0:0:0: Direct-Access     B&N      NOOK
  0322 PQ: 0 ANSI: 2
[   10.951110] sd 7:0:0:0: Attached scsi generic sg7 type 0
[   10.951161] sd 7:0:0:0: Power-on or device reset occurred
[   10.952880] sd 7:0:0:0: [sdg] Attached SCSI removable disk
snip
[  267.794434] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
using xhci_hcd
[  272.838054] usb 9-1.1: device descriptor read/8, error -110
[  272.941832] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
using xhci_hcd
[  277.958049] usb 9-1.1: device descriptor read/8, error -110
[  278.236339] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
using xhci_hcd


USB enclosed drives can be troublesome with any file system, expressly
because of these seemingly random reset that happen. I had the same
thing in an early form of my setup, and it did cause me problems that
Btrfs worked around. But I considered it untenable and fixed it with a
good quality self-powered USB hub (don't rely on bus power), or
perhaps more specifically one that comes with a high amp power
adapter. It needs to be able to drive all the drives in their
read/write usage, which for laptop drives is ~0.35A each.

You really shouldn't be getting link resets like the above, even
though I suspect it's unrelated to the current problem report.

-- 
Chris Murphy

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-10 23:56 Issues with btrfs send/receive with parents Eric Mesa
  2019-06-11  1:10 ` Chris Murphy
@ 2019-06-11  1:11 ` Remi Gauvin
  1 sibling, 0 replies; 14+ messages in thread
From: Remi Gauvin @ 2019-06-11  1:11 UTC (permalink / raw)
  To: Eric Mesa, linux-btrfs

[-- Attachment #1.1: Type: text/plain, Size: 665 bytes --]

On 2019-06-10 7:56 p.m., Eric Mesa wrote:

> ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
> firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-08_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file 
> or directory
> 

Are you by any chance using btrfs property to change RO snapshots RW?
That must *never* be done to parent subvolumes, on either sending or
receiving side.  (Really probably not a good idea to do at all outside
of very special development/testing cases, but is guaranteed to make of
mess of send/receive.)




[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-11  1:10 ` Chris Murphy
@ 2019-06-11  3:39   ` Andrei Borzenkov
  2019-06-11  4:19     ` Eric Mesa
  2019-06-11  3:47   ` Eric Mesa
  1 sibling, 1 reply; 14+ messages in thread
From: Andrei Borzenkov @ 2019-06-11  3:39 UTC (permalink / raw)
  To: Chris Murphy, Eric Mesa; +Cc: Btrfs BTRFS

11.06.2019 4:10, Chris Murphy пишет:
> 
> It's most useful if you show exact commands because actually it's not
> always obvious to everyone what the logic should be and the error
> handling doesn't always stop a user from doing something that doesn't
> make a lot of sense. We need to know the name of the rw subvolume; the
> command to snapshot it; the full send/receive command for that first
> snapshot; the command for a subsequent snapshot; and the command to
> incrementally send/receive it.
> 
> 

And the actual output of each command, not description what user thinks
has happened.


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-11  1:10 ` Chris Murphy
  2019-06-11  3:39   ` Andrei Borzenkov
@ 2019-06-11  3:47   ` Eric Mesa
  1 sibling, 0 replies; 14+ messages in thread
From: Eric Mesa @ 2019-06-11  3:47 UTC (permalink / raw)
  To: Chris Murphy; +Cc: Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 14330 bytes --]

On Monday, June 10, 2019 9:10:17 PM EDT Chris Murphy wrote:
> On Mon, Jun 10, 2019 at 6:03 PM Eric Mesa <eric@ericmesa.com> wrote:
> > When I did the btrfs send / receive for SSDHome it took 2.5 days to send
> > ~500GiB over a 1GBps cable to the 3GBps drive in the server. It also had
> > the error:
> > ERROR: failed to clone extents to ermesa/.cache/krunner/
> > bookmarkrunnerfirefoxfavdbfile.sqlite: Invalid argument
> 
> While there are distinct send and receive errors possible, I'm not
> familiar with recognizing them. You can get a better idea what the
> problem is with -vv or -vvv to get a more verbose error on the side
> that's having the problem. My guess is this is a send error message.
> 
> > Let's say that snapshot A is a snapshot sent to the server without -p. It
> > sends the entire 500GB for 18 hours.
> > 
> > Then I do snapshot B. I send it with -p - takes 15 minutes or so depending
> > on how much data I've added.
> > 
> > Then I do snapshot C - and here I always get an error.
> 
> It's most useful if you show exact commands because actually it's not
> always obvious to everyone what the logic should be and the error
> handling doesn't always stop a user from doing something that doesn't
> make a lot of sense. We need to know the name of the rw subvolume; the
> command to snapshot it; the full send/receive command for that first
> snapshot; the command for a subsequent snapshot; and the command to
> incrementally send/receive it.
> 

OK, here's an example from when it failed, although I didn't save the error - 
I'm just looking at my history for a time it failed:

#btrfs sub snap -r /home/ /home/.snapshots/2019-06-08-1437
#cd /home/.snapshots/
#btrfs send -p /home/.snapshots/2019-06-05-postdefrag/ 2019-06-08-1437/ | ssh 
#root@tanukimario btrfs receive /media/backups/backups1/supermario-home
#btrfs sub snap -r /home/ /home/.snapshots/2019-06-09-1415
#btrfs send -p 2019-06-08-1437/ 2019-06-09-1415/ | ssh root@tanukimario btrfs 
receive /media/backups/backups1/supermario-home



> > And it always is something like:
> > 
> > ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
> > bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 ->
> > ermesa/.mozilla/ firefox/n35gu0fb.default/bookmarkbackups/
> > bookmarks-2019-06-08_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such
> > file or directory
> > 
> > 
> > 
> > It always involves either .cache or .mozilla - the types of files that are
> > constantly changing.
> > 
> > It doesn't matter if I do a defrag before snapshot C followed by the sync
> > command. It seems that for SSDHome I can only do one full snap send and
> > then one parent send.
> 
> I don't actually know the status of snapshot aware defragmentation. It
> wasn't there, then it was there, then there were problems, and I think
> it was pulled rather than fixed. But I don't remember really. I also
> don't know if there's a difference between manual defragging and
> autodefrag, because I don't use either one. I do use reflinks. And I
> have done deduplication. And I don't have any send/receive failures. I
> do sometimes see slow sections of send/receive.
> 
> > Again, so far it seems to be working fine with the other drives which
> > seems to suggest to me that it's maybe not the version of my kernel or
> > btrfs progs or anything else.
> 
> Do you remember the mkfs command for this file system? Or also helpful would
> be:
> 
> # btrfs insp dump-s -f /dev/X  ## for both send and receive side file
> system (only one device from each Btrfs volume is needed), this will
> give us an idea what the mkfs options were including feature flags.
> 

for the sender:
btrfs insp dump-s -f /dev/sdb1 
superblock: bytenr=65536, device=/dev/sdb1
---------------------------------------------------------
csum_type               0 (crc32c)
csum_size               4
csum                    0xa7282fe2 [match]
bytenr                  65536
flags                   0x1
                        ( WRITTEN )
magic                   _BHRfS_M [match]
fsid                    1080b060-4f1d-4b72-8544-ada43ec3cb54
metadata_uuid           1080b060-4f1d-4b72-8544-ada43ec3cb54
label                   SSDHome
generation              3034047
root                    373805891584
sys_array_size          194
chunk_root_generation   3008316
root_level              1
chunk_root              1010940559360
chunk_root_level        1
log_root                0
log_root_transid        0
log_root_level          0
total_bytes             1000203091968
bytes_used              648933253120
sectorsize              4096
nodesize                16384
leafsize (deprecated)   16384
stripesize              4096
root_dir                6
num_devices             1
compat_flags            0x0
compat_ro_flags         0x0
incompat_flags          0x161
                        ( MIXED_BACKREF |
                          BIG_METADATA |
                          EXTENDED_IREF |
                          SKINNY_METADATA )
cache_generation        3034047
uuid_tree_generation    3034047
dev_item.uuid           61b1e688-5aad-4dff-95b7-2500c08aefb4
dev_item.fsid           1080b060-4f1d-4b72-8544-ada43ec3cb54 [match]
dev_item.type           0
dev_item.total_bytes    1000203091968
dev_item.bytes_used     864416694272
dev_item.io_align       4096
dev_item.io_width       4096
dev_item.sector_size    4096
dev_item.devid          1
dev_item.dev_group      0
dev_item.seek_speed     0
dev_item.bandwidth      0
dev_item.generation     0
sys_chunk_array[2048]:
        item 0 key (FIRST_CHUNK_TREE CHUNK_ITEM 1048576)
                length 4194304 owner 2 stripe_len 65536 type SYSTEM
                io_align 4096 io_width 4096 sector_size 4096
                num_stripes 1 sub_stripes 0
                        stripe 0 devid 1 offset 1048576
                        dev_uuid 61b1e688-5aad-4dff-95b7-2500c08aefb4
        item 1 key (FIRST_CHUNK_TREE CHUNK_ITEM 1010940510208)
                length 33554432 owner 2 stripe_len 65536 type SYSTEM
                io_align 65536 io_width 65536 sector_size 4096
                num_stripes 1 sub_stripes 1
                        stripe 0 devid 1 offset 710839107584
                        dev_uuid 61b1e688-5aad-4dff-95b7-2500c08aefb4
backup_roots[4]:
        backup 0:
                backup_tree_root:       373802975232    gen: 3034046    level: 
1
                backup_chunk_root:      1010940559360   gen: 3008316    level: 
1
                backup_extent_root:     373801369600    gen: 3034046    level: 
2
                backup_fs_root:         982774349824    gen: 2278090    level: 
0
                backup_dev_root:        38486016        gen: 3033103    level: 
1
                backup_csum_root:       373801058304    gen: 3034046    level: 
2
                backup_total_bytes:     1000203091968
                backup_bytes_used:      648933277696
                backup_num_devices:     1

        backup 1:
                backup_tree_root:       373805891584    gen: 3034047    level: 
1
                backup_chunk_root:      1010940559360   gen: 3008316    level: 
1
                backup_extent_root:     373805121536    gen: 3034047    level: 
2
                backup_fs_root:         982774349824    gen: 2278090    level: 
0
                backup_dev_root:        38486016        gen: 3033103    level: 
1
                backup_csum_root:       373804859392    gen: 3034047    level: 
2
                backup_total_bytes:     1000203091968
                backup_bytes_used:      648933253120
                backup_num_devices:     1

        backup 2:
                backup_tree_root:       373804662784    gen: 3034044    level: 
1
                backup_chunk_root:      1010940559360   gen: 3008316    level: 
1
                backup_extent_root:     373803008000    gen: 3034044    level: 
2
                backup_fs_root:         982774349824    gen: 2278090    level: 
0
                backup_dev_root:        38486016        gen: 3033103    level: 
1
                backup_csum_root:       373796159488    gen: 3034044    level: 
2
                backup_total_bytes:     1000203091968
                backup_bytes_used:      648933285888
                backup_num_devices:     1

        backup 3:
                backup_tree_root:       373800550400    gen: 3034045    level: 
1
                backup_chunk_root:      1010940559360   gen: 3008316    level: 
1
                backup_extent_root:     373800271872    gen: 3034045    level: 
2
                backup_fs_root:         982774349824    gen: 2278090    level: 
0
                backup_dev_root:        38486016        gen: 3033103    level: 
1
                backup_csum_root:       373799960576    gen: 3034045    level: 
2
                backup_total_bytes:     1000203091968
                backup_bytes_used:      648933298176
                backup_num_devices:     1


for receiver:
superblock: bytenr=65536, device=/dev/sdc1
---------------------------------------------------------
csum_type               0 (crc32c)
csum_size               4
csum                    0x47edc62b [match]
bytenr                  65536
flags                   0x1
                        ( WRITTEN )
magic                   _BHRfS_M [match]
fsid                    e1bc05b0-6fad-4f1a-9586-26a461b65d57
metadata_uuid           e1bc05b0-6fad-4f1a-9586-26a461b65d57
label                   Backups1
generation              15013
root                    368023306240
sys_array_size          129
chunk_root_generation   14915
root_level              1
chunk_root              22020096
chunk_root_level        1
log_root                0
log_root_transid        0
log_root_level          0
total_bytes             4000785104896
bytes_used              2350642929664
sectorsize              4096
nodesize                16384
leafsize (deprecated)   16384
stripesize              4096
root_dir                6
num_devices             1
compat_flags            0x0
compat_ro_flags         0x0
incompat_flags          0x161
                        ( MIXED_BACKREF |
                          BIG_METADATA |
                          EXTENDED_IREF |
                          SKINNY_METADATA )
cache_generation        15013
uuid_tree_generation    15013
dev_item.uuid           6640d884-bcf6-4f0c-8d97-a31d72133a76
dev_item.fsid           e1bc05b0-6fad-4f1a-9586-26a461b65d57 [match]
dev_item.type           0
dev_item.total_bytes    4000785104896
dev_item.bytes_used     2509351419904
dev_item.io_align       4096
dev_item.io_width       4096
dev_item.sector_size    4096
dev_item.devid          1
dev_item.dev_group      0
dev_item.seek_speed     0
dev_item.bandwidth      0
dev_item.generation     0
sys_chunk_array[2048]:
        item 0 key (FIRST_CHUNK_TREE CHUNK_ITEM 22020096)
                length 8388608 owner 2 stripe_len 65536 type SYSTEM|DUP
                io_align 65536 io_width 65536 sector_size 4096
                num_stripes 2 sub_stripes 0
                        stripe 0 devid 1 offset 22020096
                        dev_uuid 6640d884-bcf6-4f0c-8d97-a31d72133a76
                        stripe 1 devid 1 offset 30408704
                        dev_uuid 6640d884-bcf6-4f0c-8d97-a31d72133a76
backup_roots[4]:
        backup 0:
                backup_tree_root:       368023109632    gen: 15010      level: 
1
                backup_chunk_root:      22020096        gen: 14915      level: 
1
                backup_extent_root:     368023158784    gen: 15010      level: 
2
                backup_fs_root:         30621696        gen: 7  level: 0
                backup_dev_root:        499089408       gen: 14915      level: 
1
                backup_csum_root:       368016621568    gen: 15010      level: 
3
                backup_total_bytes:     4000785104896
                backup_bytes_used:      2350286446592
                backup_num_devices:     1

        backup 1:
                backup_tree_root:       368024518656    gen: 15011      level: 
1
                backup_chunk_root:      22020096        gen: 14915      level: 
1
                backup_extent_root:     368024551424    gen: 15011      level: 
2
                backup_fs_root:         30621696        gen: 7  level: 0
                backup_dev_root:        499089408       gen: 14915      level: 
1
                backup_csum_root:       368024682496    gen: 15011      level: 
3
                backup_total_bytes:     4000785104896

                backup_total_bytes:     4000785104896
                backup_bytes_used:      2350642929664
                backup_num_devices:     1



> > And dmesg.log is attached
> 
> [    6.949347] BTRFS info (device sdb1): enabling auto defrag
> 
> Could be related. And then also
> 
> [    9.906695] usb-storage 8-1.3:1.0: USB Mass Storage device detected
> [    9.907006] scsi host7: usb-storage 8-1.3:1.0
> [   10.950446] scsi 7:0:0:0: Direct-Access     B&N      NOOK
>   0322 PQ: 0 ANSI: 2
> [   10.951110] sd 7:0:0:0: Attached scsi generic sg7 type 0
> [   10.951161] sd 7:0:0:0: Power-on or device reset occurred
> [   10.952880] sd 7:0:0:0: [sdg] Attached SCSI removable disk
> snip
> [  267.794434] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
> using xhci_hcd
> [  272.838054] usb 9-1.1: device descriptor read/8, error -110
> [  272.941832] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
> using xhci_hcd
> [  277.958049] usb 9-1.1: device descriptor read/8, error -110
> [  278.236339] usb 9-1.1: reset SuperSpeed Gen 1 USB device number 3
> using xhci_hcd
> 
> 
> USB enclosed drives can be troublesome with any file system, expressly
> because of these seemingly random reset that happen. I had the same
> thing in an early form of my setup, and it did cause me problems that
> Btrfs worked around. But I considered it untenable and fixed it with a
> good quality self-powered USB hub (don't rely on bus power), or
> perhaps more specifically one that comes with a high amp power
> adapter. It needs to be able to drive all the drives in their
> read/write usage, which for laptop drives is ~0.35A each.
> 
> You really shouldn't be getting link resets like the above, even
> though I suspect it's unrelated to the current problem report.

the drives in question aren't USB. That's for a USB3 hub that I use for my SD 
cards.
-- 
--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-11  3:39   ` Andrei Borzenkov
@ 2019-06-11  4:19     ` Eric Mesa
  2019-06-12  5:43       ` Andrei Borzenkov
  0 siblings, 1 reply; 14+ messages in thread
From: Eric Mesa @ 2019-06-11  4:19 UTC (permalink / raw)
  To: Andrei Borzenkov; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 5270 bytes --]

On Monday, June 10, 2019 11:39:53 PM EDT Andrei Borzenkov wrote:
> 11.06.2019 4:10, Chris Murphy пишет:
> > It's most useful if you show exact commands because actually it's not
> > always obvious to everyone what the logic should be and the error
> > handling doesn't always stop a user from doing something that doesn't
> > make a lot of sense. We need to know the name of the rw subvolume; the
> > command to snapshot it; the full send/receive command for that first
> > snapshot; the command for a subsequent snapshot; and the command to
> > incrementally send/receive it.
> 
> And the actual output of each command, not description what user thinks
> has happened.

Here is a new session where I'll capture everything - well, on the defrag I'll 
do a snip.

#btrfs fi defrag -v -r /home/

...there follows a list of files that just scrolls infinitely....
/home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/_bisect.cpython-37m-
x86_64-linux-gnu.so
/home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/
tornado.speedups.cpython-37m-x86_64-linux-gnu.so
/home/ermesa/.bash_history
total 1 failures

# sync

# btrfs sub snap -r /home/ /home/.snapshots/2019-06-10-2353
Create a readonly snapshot of '/home/' in '/home/.snapshots/2019-06-10-2353'

# btrfs send -vvv -p /home/.snapshots/2019-06-10-1718/ /home/.snapshots/
2019-06-10-2353/ | ssh root@tanukimario btrfs receive /media/backups/backups1/
supermario-home
At subvol /home/.snapshots/2019-06-10-2353/
ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file 
or directory

Same error as before. So I go to tanukimario and del the errored subvol. Let 
me try with -vvv on the receive as well. Well, that produces a ridiculous 
scrolling list that I can't possible capture. Perhaps just -v? No, that's the 
same. So then I tried this command:

# btrfs send -vvv -p /home/.snapshots/2019-06-10-1718/ /home/.snapshots/
2019-06-10-2353/ | ssh root@tanukimario btrfs receive -vvv /media/backups/
backups1/supermario-home > receive.log

But my bash-fu was bad and it didn't put anything into the log other than "At 
snapshot..." So yeah....

What scrolled on my screen ended like this:


write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
32C1CAC72D7CACC3630A470C6622283DA500617A - offset=540672 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
32C1CAC72D7CACC3630A470C6622283DA500617A - offset=589824 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
32C1CAC72D7CACC3630A470C6622283DA500617A - offset=638976 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
32C1CAC72D7CACC3630A470C6622283DA500617A - offset=688128 length=34158
utimes ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
32C1CAC72D7CACC3630A470C6622283DA500617A
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05 - offset=0 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05 - offset=49152 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05 - offset=98304 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05 - offset=147456 length=49152
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05 - offset=196608 length=11390
utimes ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
DC0F9B96CE8C66CE51826341395D9B8805053D05
unlink ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
FEFC32BF08374B9F91B5B002FF51DF3DFB21B667
utimes ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
177BF2896EEBDB17A538A6ACB13C62925D0E84CA - offset=0 length=12280
utimes ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
177BF2896EEBDB17A538A6ACB13C62925D0E84CA
write ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
A0BC2B69D3EACA6005AFF72A4EC168ECC4DFC764 - offset=0 length=220
utimes ermesa/.cache/mozilla/firefox/n35gu0fb.default/cache2/entries/
A0BC2B69D3EACA6005AFF72A4EC168ECC4DFC764
unlink ermesa/.cache/ksycoca5_en_cJ+y22ar1ZzIcHsefGXiujDwk34=
unlink ermesa/.cache/ksycoca5
utimes ermesa/.cache
utimes ermesa/.cache
link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4
ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
firefox/n35gu0fb.default/bookmarkbackups/
bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file 
or directory

--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-11  4:19     ` Eric Mesa
@ 2019-06-12  5:43       ` Andrei Borzenkov
  2019-06-12 23:03         ` Eric Mesa
  0 siblings, 1 reply; 14+ messages in thread
From: Andrei Borzenkov @ 2019-06-12  5:43 UTC (permalink / raw)
  To: Eric Mesa; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1.1: Type: text/plain, Size: 2429 bytes --]

11.06.2019 7:19, Eric Mesa пишет:
> On Monday, June 10, 2019 11:39:53 PM EDT Andrei Borzenkov wrote:
>> 11.06.2019 4:10, Chris Murphy пишет:
>>> It's most useful if you show exact commands because actually it's not
>>> always obvious to everyone what the logic should be and the error
>>> handling doesn't always stop a user from doing something that doesn't
>>> make a lot of sense. We need to know the name of the rw subvolume; the
>>> command to snapshot it; the full send/receive command for that first
>>> snapshot; the command for a subsequent snapshot; and the command to
>>> incrementally send/receive it.
>>
>> And the actual output of each command, not description what user thinks
>> has happened.
> 
> Here is a new session where I'll capture everything - well, on the defrag I'll 
> do a snip.
> 
> #btrfs fi defrag -v -r /home/
> 
> ...there follows a list of files that just scrolls infinitely....
> /home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/_bisect.cpython-37m-
> x86_64-linux-gnu.so
> /home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/
> tornado.speedups.cpython-37m-x86_64-linux-gnu.so
> /home/ermesa/.bash_history
> total 1 failures
> 
> # sync
> 
> # btrfs sub snap -r /home/ /home/.snapshots/2019-06-10-2353
> Create a readonly snapshot of '/home/' in '/home/.snapshots/2019-06-10-2353'
> 
> # btrfs send -vvv -p /home/.snapshots/2019-06-10-1718/ /home/.snapshots/
> 2019-06-10-2353/ | ssh root@tanukimario btrfs receive /media/backups/backups1/
> supermario-home
> At subvol /home/.snapshots/2019-06-10-2353/
> ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 -> ermesa/.mozilla/
> firefox/n35gu0fb.default/bookmarkbackups/
> bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such file 
> or directory
> 

Does
ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4
actually exist in snapshot /home/.snapshots/2019-06-10-1718/ on source?

ls -lR
/home/.snapshots/2019-06-10-1718/ermesa/.mozilla/n35gu0fb.default/bookmarkbackups

What is the content of the same directory in matching snapshot on
destination?

Please show "btrfs subvolume list -qRu /home" for source and "btrfs
subvolume list -qRu /media/backups/backups1/supermario-home" for
destination.





[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-12  5:43       ` Andrei Borzenkov
@ 2019-06-12 23:03         ` Eric Mesa
  2019-06-12 23:11           ` Eric Mesa
  2019-06-13  6:26           ` Andrei Borzenkov
  0 siblings, 2 replies; 14+ messages in thread
From: Eric Mesa @ 2019-06-12 23:03 UTC (permalink / raw)
  To: Andrei Borzenkov; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 9806 bytes --]

On Wednesday, June 12, 2019 1:43:00 AM EDT Andrei Borzenkov wrote:
> 11.06.2019 7:19, Eric Mesa пишет:
> > On Monday, June 10, 2019 11:39:53 PM EDT Andrei Borzenkov wrote:
> >> 11.06.2019 4:10, Chris Murphy пишет:
> >>> It's most useful if you show exact commands because actually it's not
> >>> always obvious to everyone what the logic should be and the error
> >>> handling doesn't always stop a user from doing something that doesn't
> >>> make a lot of sense. We need to know the name of the rw subvolume; the
> >>> command to snapshot it; the full send/receive command for that first
> >>> snapshot; the command for a subsequent snapshot; and the command to
> >>> incrementally send/receive it.
> >> 
> >> And the actual output of each command, not description what user thinks
> >> has happened.
> > 
> > Here is a new session where I'll capture everything - well, on the defrag
> > I'll do a snip.
> > 
> > #btrfs fi defrag -v -r /home/
> > 
> > ...there follows a list of files that just scrolls infinitely....
> > /home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/_bisect.cpython-37m
> > -
> > x86_64-linux-gnu.so
> > /home/ermesa/.dropbox-dist/dropbox-lnx.x86_64-74.4.115/
> > tornado.speedups.cpython-37m-x86_64-linux-gnu.so
> > /home/ermesa/.bash_history
> > total 1 failures
> > 
> > # sync
> > 
> > # btrfs sub snap -r /home/ /home/.snapshots/2019-06-10-2353
> > Create a readonly snapshot of '/home/' in
> > '/home/.snapshots/2019-06-10-2353'
> > 
> > # btrfs send -vvv -p /home/.snapshots/2019-06-10-1718/ /home/.snapshots/
> > 2019-06-10-2353/ | ssh root@tanukimario btrfs receive
> > /media/backups/backups1/ supermario-home
> > At subvol /home/.snapshots/2019-06-10-2353/
> > ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
> > bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 ->
> > ermesa/.mozilla/ firefox/n35gu0fb.default/bookmarkbackups/
> > bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such
> > file or directory
> 
> Does
> ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/bookmarks-2019-06-0
> 9_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 actually exist in snapshot
> /home/.snapshots/2019-06-10-1718/ on source?
> 
> ls -lR
> /home/.snapshots/2019-06-10-1718/ermesa/.mozilla/n35gu0fb.default/bookmarkba
> ckups
> 
> What is the content of the same directory in matching snapshot on
> destination?
> 
> Please show "btrfs subvolume list -qRu /home" for source and "btrfs
> subvolume list -qRu /media/backups/backups1/supermario-home" for
> destination.


Sure thing. Thanks for your help. 

This is source disk:

#  ls -lR /home/.snapshots/2019-06-10-1718/ermesa/.mozilla/n35gu0fb.default/
bookmarkbackups/
ls: cannot access '/home/.snapshots/2019-06-10-1718/ermesa/.mozilla/
n35gu0fb.default/bookmarkbackups/': No such file or directory

You didn't ask for the child, but I'm going to do it in that, too:

# ls -lR /home/.snapshots/2019-06-10-2353/ermesa/.mozilla/n35gu0fb.default/
bookmarkbackups/
ls: cannot access '/home/.snapshots/2019-06-10-2353/ermesa/.mozilla/
n35gu0fb.default/bookmarkbackups/': No such file or directory

One more thing you didn't ask for, but since this is the ancestor of all -p 
snapshots that actually worked:

# ls -lR /home/.snapshots/2019-06-05-postdefrag/ermesa/.mozilla/
n35gu0fb.default/bookmarkbackups/
ls: cannot access '/home/.snapshots/2019-06-05-postdefrag/ermesa/.mozilla/
n35gu0fb.default/bookmarkbackups/': No such file or directory

On the destination disk:

# pwd                                                                                                                                                                             
/media/backups/backups1/supermario-home

# ls -lR 2019-06-10-1718/ermesa/.mozilla/n35gu0fb.default/bookmarkbackups/                                                                                                        
ls: cannot access '2019-06-10-1718/ermesa/.mozilla/n35gu0fb.default/
bookmarkbackups/': No such file or directory


On the source disk:

# btrfs subvolume list -qRu /home
ID 822 gen 3042780 top level 5 parent_uuid c6101e57-acd3-e54c-a957-
b2b6a033bc42 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
7247f4a0-6ea2-0d49-b5c5-1ea2ecb8980a path home
ID 823 gen 3042727 top level 822 parent_uuid -                                    
received_uuid -                                    uuid f83e53b6-dc88-1a44-
a5e8-f220d5d21083 path .snapshots
ID 2515 gen 3008316 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
8ef83478-86be-8a47-a425-1dc6957a0fbe path .snapshots/2019-06-05-postdefrag
ID 2516 gen 3021663 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
cbb67aec-02ed-8247-afee-38ae94555471 path .snapshots/2019-06-08-1437
ID 2518 gen 3027353 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
ca361150-1050-5844-bff7-de5c89b5cc05 path .snapshots/2019-06-09-1550
ID 2519 gen 3028168 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
5fa82b5e-59e1-2549-a939-5dabc99c0f2a path .snapshots/2019-06-09-1944
ID 2520 gen 3032614 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
df437aaf-0f40-344e-8302-932ea8e5f197 path .snapshots/2019-06-10-1718
ID 2521 gen 3034140 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
2b985685-d88b-784a-b870-8f5f8fcdd08c path .snapshots/2019-06-10-2353


On the destination disk: (I deleted 2019-06-2353 since it wasn't a valid 
backup and I didn't want to get confused when determining which backups I 
could delete)

btrfs subvolume list -qRu /media/backups/backups1/supermario-home
ID 257 gen 15047 top level 5 parent_uuid -                                    
received_uuid -                                    uuid 5d93ca75-
f423-9840-893e-6324f7e79e02 path backups
ID 258 gen 15049 top level 257 parent_uuid -                                    
received_uuid -                                    uuid 8b60359a-9525-4044-
ac04-4982f1f1fe3a path backups/supermario-home
ID 826 gen 14290 top level 257 parent_uuid -                                    
received_uuid -                                    uuid c7dc0373-7e2a-bb44-
b32c-172aac73b8a7 path backups/VG_ROMs
ID 827 gen 4313 top level 826 parent_uuid -                                    
received_uuid a85853e1-848f-ac46-93c6-da5035cc8042 uuid 0ef9b4f9-
f8b6-8943-8714-38e9376019bf path backups/VG_ROMs/2017-01-21-original
ID 1021 gen 4334 top level 826 parent_uuid 0ef9b4f9-
f8b6-8943-8714-38e9376019bf received_uuid c7356dd2-9fa3-1141-8433-4ba96e4cdcd6 
uuid 8c46bc72-9738-d24e-bb9a-c1edcf7a4755 path backups/VG_ROMs/2019-05-30
ID 1024 gen 15048 top level 257 parent_uuid -                                    
received_uuid -                                    uuid bc92cd25-cf4b-
d24c-8cf5-ddb0df654e05 path backups/Comics
ID 1025 gen 9890 top level 1024 parent_uuid -                                    
received_uuid fd3e9edb-854a-4143-993e-e2a8bbd4cedb uuid 
7a5bd7be-43aa-7f44-9443-ff96cf575175 path backups/Comics/2019-05-30
ID 1027 gen 4336 top level 826 parent_uuid 8c46bc72-9738-d24e-bb9a-
c1edcf7a4755 received_uuid -                                    uuid 85b5572b-
edc3-6d48-8b4d-3c956cae2da5 path backups/VG_ROMs/ROMs_NFS-orig
ID 1602 gen 15047 top level 257 parent_uuid -                                    
received_uuid -                                    uuid 13ab4679-
eccb-6544-8176-6f494236f1c9 path backups/Archive
ID 1603 gen 9964 top level 1602 parent_uuid -                                    
received_uuid 3c48ee45-4454-2f4a-86b7-5c498ffb784d uuid ab3efbd4-e78f-f745-
b401-b653e0ad6667 path backups/Archive/2019-06-01
ID 2726 gen 10165 top level 1024 parent_uuid 7a5bd7be-43aa-7f44-9443-
ff96cf575175 received_uuid 0df42045-b04a-5f43-924e-69b39e1b3ce6 uuid 
f46a045c-41c4-c543-ba5f-948b97e43746 path backups/Comics/2019-06-03
ID 2728 gen 12315 top level 1602 parent_uuid ab3efbd4-e78f-f745-b401-
b653e0ad6667 received_uuid 649d6bec-9f54-2a44-8fed-8e6e9c054f8c uuid 
255c8dc8-8d61-9342-9f3c-af06fe82daf6 path backups/Archive/2019-06-03
ID 2732 gen 10171 top level 1024 parent_uuid f46a045c-41c4-c543-
ba5f-948b97e43746 received_uuid a3a6b2d9-0b30-a342-bafb-6a3a70258994 uuid 
0cb98f03-0152-494c-935f-d6af45cf23dd path backups/Comics/2019-06-03p2
ID 2977 gen 12337 top level 1602 parent_uuid 255c8dc8-8d61-9342-9f3c-
af06fe82daf6 received_uuid 1404041e-6456-2641-a35a-f30f08baf250 uuid 
42eb5475-1b2f-8948-8333-b8a1267455e0 path backups/Archive/2019-06-05
ID 2983 gen 15033 top level 258 parent_uuid -                                    
received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 7685ff5c-0a72-
f94e-93d7-7736f68b3ec5 path 2019-06-05-postdefrag
ID 3545 gen 14310 top level 258 parent_uuid 7685ff5c-0a72-
f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
26791559-bd47-e44f-9e2f-0ea258615429 path 2019-06-08-1437
ID 3550 gen 14878 top level 258 parent_uuid 7685ff5c-0a72-
f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
7c9787bc-fbc4-c146-b88b-e5dd10918eaa path 2019-06-09-1944
ID 3582 gen 15012 top level 258 parent_uuid 7685ff5c-0a72-
f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
44963c1e-7bc7-f34a-9370-ce180ce05b69 path 2019-06-10-1718

--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-12 23:03         ` Eric Mesa
@ 2019-06-12 23:11           ` Eric Mesa
  2019-06-13  6:26           ` Andrei Borzenkov
  1 sibling, 0 replies; 14+ messages in thread
From: Eric Mesa @ 2019-06-12 23:11 UTC (permalink / raw)
  To: Andrei Borzenkov; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 11148 bytes --]

On Wednesday, June 12, 2019 7:03:04 PM EDT Eric Mesa wrote:
> 
> On the source disk:
> 
> # btrfs subvolume list -qRu /home
> ID 822 gen 3042780 top level 5 parent_uuid c6101e57-acd3-e54c-a957-
> b2b6a033bc42 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> 7247f4a0-6ea2-0d49-b5c5-1ea2ecb8980a path home
> ID 823 gen 3042727 top level 822 parent_uuid -
> received_uuid -                                    uuid f83e53b6-dc88-1a44-
> a5e8-f220d5d21083 path .snapshots
> ID 2515 gen 3008316 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> 8ef83478-86be-8a47-a425-1dc6957a0fbe path .snapshots/2019-06-05-postdefrag
> ID 2516 gen 3021663 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> cbb67aec-02ed-8247-afee-38ae94555471 path .snapshots/2019-06-08-1437
> ID 2518 gen 3027353 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> ca361150-1050-5844-bff7-de5c89b5cc05 path .snapshots/2019-06-09-1550
> ID 2519 gen 3028168 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> 5fa82b5e-59e1-2549-a939-5dabc99c0f2a path .snapshots/2019-06-09-1944
> ID 2520 gen 3032614 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> df437aaf-0f40-344e-8302-932ea8e5f197 path .snapshots/2019-06-10-1718
> ID 2521 gen 3034140 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid
> 2b985685-d88b-784a-b870-8f5f8fcdd08c path .snapshots/2019-06-10-2353
> 
> 
> On the destination disk: (I deleted 2019-06-2353 since it wasn't a valid
> backup and I didn't want to get confused when determining which backups I
> could delete)
> 
> btrfs subvolume list -qRu /media/backups/backups1/supermario-home
> ID 257 gen 15047 top level 5 parent_uuid -
> received_uuid -                                    uuid 5d93ca75-
> f423-9840-893e-6324f7e79e02 path backups
> ID 258 gen 15049 top level 257 parent_uuid -
> received_uuid -                                    uuid 8b60359a-9525-4044-
> ac04-4982f1f1fe3a path backups/supermario-home
> ID 826 gen 14290 top level 257 parent_uuid -
> received_uuid -                                    uuid c7dc0373-7e2a-bb44-
> b32c-172aac73b8a7 path backups/VG_ROMs
> ID 827 gen 4313 top level 826 parent_uuid -
> received_uuid a85853e1-848f-ac46-93c6-da5035cc8042 uuid 0ef9b4f9-
> f8b6-8943-8714-38e9376019bf path backups/VG_ROMs/2017-01-21-original
> ID 1021 gen 4334 top level 826 parent_uuid 0ef9b4f9-
> f8b6-8943-8714-38e9376019bf received_uuid
> c7356dd2-9fa3-1141-8433-4ba96e4cdcd6 uuid
> 8c46bc72-9738-d24e-bb9a-c1edcf7a4755 path backups/VG_ROMs/2019-05-30 ID
> 1024 gen 15048 top level 257 parent_uuid -
> received_uuid -                                    uuid bc92cd25-cf4b-
> d24c-8cf5-ddb0df654e05 path backups/Comics
> ID 1025 gen 9890 top level 1024 parent_uuid -
> received_uuid fd3e9edb-854a-4143-993e-e2a8bbd4cedb uuid
> 7a5bd7be-43aa-7f44-9443-ff96cf575175 path backups/Comics/2019-05-30
> ID 1027 gen 4336 top level 826 parent_uuid 8c46bc72-9738-d24e-bb9a-
> c1edcf7a4755 received_uuid -                                    uuid
> 85b5572b- edc3-6d48-8b4d-3c956cae2da5 path backups/VG_ROMs/ROMs_NFS-orig
> ID 1602 gen 15047 top level 257 parent_uuid -
> received_uuid -                                    uuid 13ab4679-
> eccb-6544-8176-6f494236f1c9 path backups/Archive
> ID 1603 gen 9964 top level 1602 parent_uuid -
> received_uuid 3c48ee45-4454-2f4a-86b7-5c498ffb784d uuid ab3efbd4-e78f-f745-
> b401-b653e0ad6667 path backups/Archive/2019-06-01
> ID 2726 gen 10165 top level 1024 parent_uuid 7a5bd7be-43aa-7f44-9443-
> ff96cf575175 received_uuid 0df42045-b04a-5f43-924e-69b39e1b3ce6 uuid
> f46a045c-41c4-c543-ba5f-948b97e43746 path backups/Comics/2019-06-03
> ID 2728 gen 12315 top level 1602 parent_uuid ab3efbd4-e78f-f745-b401-
> b653e0ad6667 received_uuid 649d6bec-9f54-2a44-8fed-8e6e9c054f8c uuid
> 255c8dc8-8d61-9342-9f3c-af06fe82daf6 path backups/Archive/2019-06-03
> ID 2732 gen 10171 top level 1024 parent_uuid f46a045c-41c4-c543-
> ba5f-948b97e43746 received_uuid a3a6b2d9-0b30-a342-bafb-6a3a70258994 uuid
> 0cb98f03-0152-494c-935f-d6af45cf23dd path backups/Comics/2019-06-03p2
> ID 2977 gen 12337 top level 1602 parent_uuid 255c8dc8-8d61-9342-9f3c-
> af06fe82daf6 received_uuid 1404041e-6456-2641-a35a-f30f08baf250 uuid
> 42eb5475-1b2f-8948-8333-b8a1267455e0 path backups/Archive/2019-06-05
> ID 2983 gen 15033 top level 258 parent_uuid -
> received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 path 2019-06-05-postdefrag
> ID 3545 gen 14310 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14
> uuid 26791559-bd47-e44f-9e2f-0ea258615429 path 2019-06-08-1437
> ID 3550 gen 14878 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14
> uuid 7c9787bc-fbc4-c146-b88b-e5dd10918eaa path 2019-06-09-1944
> ID 3582 gen 15012 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14
> uuid 44963c1e-7bc7-f34a-9370-ce180ce05b69 path 2019-06-10-1718
> 
> --
> Eric Mesa


I'm sure you guys already noticed this if you saw the email I sent about 5 
minutes ago, but I did a comparison between my /home directory (which is 
giving me issues) and /media/Photos and /media/NotHome which are not giving me 
issues with that command you ahd me type - btrfs subvolume list -qRu. Turns 
out that my snapshots in home all have a parent listed, but those other 
directories don't. 

For example:

# btrfs subvolume list -qRu /media/Photos/
ID 257 gen 328447 top level 5 parent_uuid -                                    
received_uuid -                                    uuid e638e583-eaf5-6a47-
a6e2-1e34d65146df path photos
ID 2666 gen 326598 top level 257 parent_uuid -                                    
received_uuid -                                    uuid 
15da54cb-0183-8648-9662-f500e9c82c23 path .Snapshots
ID 2667 gen 159288 top level 2666 parent_uuid e638e583-eaf5-6a47-
a6e2-1e34d65146df received_uuid -                                    uuid 
31e34d12-3dc1-794b-aa05-58990085069b path .Snapshots/2017-02-04
ID 5663 gen 322711 top level 2666 parent_uuid e638e583-eaf5-6a47-
a6e2-1e34d65146df received_uuid -                                    uuid 
786e2521-1877-9a46-b16b-aa4944d2cac6 path .Snapshots/2019-06-06
ID 5666 gen 326550 top level 2666 parent_uuid e638e583-eaf5-6a47-
a6e2-1e34d65146df received_uuid -                                    uuid 
97282c24-9cf0-c34e-91ba-b49a876e139c path .Snapshots/2019-06-09
ID 5667 gen 326582 top level 2666 parent_uuid e638e583-eaf5-6a47-
a6e2-1e34d65146df received_uuid -                                    uuid 
9cd6222a-cc77-9649-a9de-3c3e26514bf7 path .Snapshots/2019-06-10-1953

or 

# btrfs subvolume list -qRu /media/NotHome/
ID 1213 gen 122104 top level 1528 parent_uuid -                                    
received_uuid -                                    uuid 5cc42609-193a-
d341-9d76-b220093d572e path Snapshots/Torrents_RO
ID 1528 gen 183718 top level 5 parent_uuid -                                    
received_uuid -                                    uuid bb843dbe-ba8c-2045-
b548-7c799ea5646f path Snapshots
ID 1529 gen 184443 top level 5 parent_uuid 1331b71c-
ac2e-6d4d-91d6-55565534e87c received_uuid -                                    
uuid b4f18ee4-636a-3744-8869-8002c70ae707 path Archive
ID 1530 gen 184023 top level 5 parent_uuid 
17a1a4c0-76e2-7345-8123-6b5852f96a3a received_uuid -                                    
uuid 11d61ab5-ec8f-f741-a7f8-fa7d2d270431 path Handbrake
ID 1531 gen 184027 top level 5 parent_uuid 1b9dae89-ad97-
ad4f-8e36-446b56ca30d4 received_uuid -                                    uuid 
f16979e8-5144-a649-8dc3-af160e481ac8 path OBS
ID 1532 gen 184016 top level 5 parent_uuid 5cc42609-193a-d341-9d76-
b220093d572e received_uuid -                                    uuid 
923b6b54-0cd9-5c45-a481-fa3d88397fb8 path Torrents
ID 1533 gen 184350 top level 5 parent_uuid c649190a-78e0-b34c-
a0ad-68b4e0da9d45 received_uuid -                                    uuid 
cc0dfd12-1422-da48-a942-864f121b0d2f path VMs
ID 1646 gen 184275 top level 5 parent_uuid -                                    
received_uuid -                                    uuid b3d567f8-
e1f7-7545-9fa1-5e6b8f6b0b34 path VG_ROMs
ID 1666 gen 2075 top level 1528 parent_uuid 
b4f18ee4-636a-3744-8869-8002c70ae707 received_uuid -                                    
uuid 16ad77a4-c02a-0b47-9fcb-2e772cc82cd4 path Snapshots/Archive/2017-01-20
ID 1800 gen 2129 top level 1528 parent_uuid b3d567f8-
e1f7-7545-9fa1-5e6b8f6b0b34 received_uuid -                                    
uuid a85853e1-848f-ac46-93c6-da5035cc8042 path Snapshots/VG_ROMs/2017-01-21-
original
ID 2170 gen 2397 top level 1528 parent_uuid 23189154-b88e-e841-
a580-5f6cba88178f received_uuid -                                    uuid 
5bdf9ea9-337e-164b-b8e9-6e096f6ed749 path Snapshots/Comics/2017-01-21
ID 3165 gen 183107 top level 1528 parent_uuid b3d567f8-
e1f7-7545-9fa1-5e6b8f6b0b34 received_uuid -                                    
uuid c7356dd2-9fa3-1141-8433-4ba96e4cdcd6 path Snapshots/VG_ROMs/2019-05-30
ID 3166 gen 183173 top level 1528 parent_uuid 23189154-b88e-e841-
a580-5f6cba88178f received_uuid -                                    uuid 
fd3e9edb-854a-4143-993e-e2a8bbd4cedb path Snapshots/Comics/2019-05-30
ID 3169 gen 184446 top level 5 parent_uuid fd3e9edb-854a-4143-993e-
e2a8bbd4cedb received_uuid -                                    uuid 42c5b7f9-
e185-994f-9882-556fab3143de path Comics
ID 3170 gen 183182 top level 1528 parent_uuid 
b4f18ee4-636a-3744-8869-8002c70ae707 received_uuid -                                    
uuid 3c48ee45-4454-2f4a-86b7-5c498ffb784d path Snapshots/Archive/2019-06-01
ID 3195 gen 183575 top level 1528 parent_uuid 42c5b7f9-
e185-994f-9882-556fab3143de received_uuid -                                    
uuid 0df42045-b04a-5f43-924e-69b39e1b3ce6 path Snapshots/Comics/2019-06-03
ID 3200 gen 183592 top level 1528 parent_uuid 
b4f18ee4-636a-3744-8869-8002c70ae707 received_uuid -                                    
uuid 649d6bec-9f54-2a44-8fed-8e6e9c054f8c path Snapshots/Archive/2019-06-03
ID 3201 gen 183594 top level 1528 parent_uuid 42c5b7f9-
e185-994f-9882-556fab3143de received_uuid -                                    
uuid a3a6b2d9-0b30-a342-bafb-6a3a70258994 path Snapshots/Comics/2019-06-03p2
ID 3209 gen 183717 top level 1528 parent_uuid 
b4f18ee4-636a-3744-8869-8002c70ae707 received_uuid -                                    
uuid 1404041e-6456-2641-a35a-f30f08baf250 path Snapshots/Archive/2019-06-05


Gentlemen (and possibly ladies), I think we've potentially found the culprit! 
But how to fix without losing my data??
-- 
--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-12 23:03         ` Eric Mesa
  2019-06-12 23:11           ` Eric Mesa
@ 2019-06-13  6:26           ` Andrei Borzenkov
  2019-06-13 21:22             ` Eric Mesa
  1 sibling, 1 reply; 14+ messages in thread
From: Andrei Borzenkov @ 2019-06-13  6:26 UTC (permalink / raw)
  To: Eric Mesa; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1.1: Type: text/plain, Size: 4247 bytes --]

13.06.2019 2:03, Eric Mesa пишет:
...
>>>
>>> # btrfs sub snap -r /home/ /home/.snapshots/2019-06-10-2353
>>> Create a readonly snapshot of '/home/' in
>>> '/home/.snapshots/2019-06-10-2353'
>>>
>>> # btrfs send -vvv -p /home/.snapshots/2019-06-10-1718/ /home/.snapshots/
>>> 2019-06-10-2353/ | ssh root@tanukimario btrfs receive
>>> /media/backups/backups1/ supermario-home
>>> At subvol /home/.snapshots/2019-06-10-2353/
>>> ERROR: link ermesa/.mozilla/firefox/n35gu0fb.default/bookmarkbackups/
>>> bookmarks-2019-06-10_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 ->
>>> ermesa/.mozilla/ firefox/n35gu0fb.default/bookmarkbackups/
>>> bookmarks-2019-06-09_679_I1bs5PtgsPwtyXvcvcRdSg==.jsonlz4 failed: No such
>>> file or directory
>>
...
> 
> 
> On the source disk:
> 
> # btrfs subvolume list -qRu /home
> ID 822 gen 3042780 top level 5 parent_uuid c6101e57-acd3-e54c-a957-
> b2b6a033bc42 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 7247f4a0-6ea2-0d49-b5c5-1ea2ecb8980a path home
> ID 823 gen 3042727 top level 822 parent_uuid -                                    
> received_uuid -                                    uuid f83e53b6-dc88-1a44-
> a5e8-f220d5d21083 path .snapshots
> ID 2515 gen 3008316 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 8ef83478-86be-8a47-a425-1dc6957a0fbe path .snapshots/2019-06-05-postdefrag
> ID 2516 gen 3021663 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> cbb67aec-02ed-8247-afee-38ae94555471 path .snapshots/2019-06-08-1437
> ID 2518 gen 3027353 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> ca361150-1050-5844-bff7-de5c89b5cc05 path .snapshots/2019-06-09-1550
> ID 2519 gen 3028168 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 5fa82b5e-59e1-2549-a939-5dabc99c0f2a path .snapshots/2019-06-09-1944
> ID 2520 gen 3032614 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> df437aaf-0f40-344e-8302-932ea8e5f197 path .snapshots/2019-06-10-1718
> ID 2521 gen 3034140 top level 823 parent_uuid 7247f4a0-6ea2-0d49-
> b5c5-1ea2ecb8980a received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 2b985685-d88b-784a-b870-8f5f8fcdd08c path .snapshots/2019-06-10-2353
> 
> 
> On the destination disk: (I deleted 2019-06-2353 since it wasn't a valid 
> backup and I didn't want to get confused when determining which backups I 
> could delete)
> 
> btrfs subvolume list -qRu /media/backups/backups1/supermario-home
...
> ID 2983 gen 15033 top level 258 parent_uuid -                                    
> received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 path 2019-06-05-postdefrag
> ID 3545 gen 14310 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 26791559-bd47-e44f-9e2f-0ea258615429 path 2019-06-08-1437
> ID 3550 gen 14878 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 7c9787bc-fbc4-c146-b88b-e5dd10918eaa path 2019-06-09-1944
> ID 3582 gen 15012 top level 258 parent_uuid 7685ff5c-0a72-
> f94e-93d7-7736f68b3ec5 received_uuid ab1ea98a-b950-2047-802d-3b26568e2e14 uuid 
> 44963c1e-7bc7-f34a-9370-ce180ce05b69 path 2019-06-10-1718
> 

All your snapshots on source have the same received_uuid (I have no idea
how is it possible). If received_uuid exists, it is sent to destination
instead of subvolume UUID to identify matching snapshot. All your backup
sbapshots on destination also have the same received_uuid which is
matched against (received_)UUID of source subvolume. In this case
receive command takes the first found subvolume (probably the most
recent, i.e. with the smallest generation number). So you send
differential stream against one subvolume and this stream is applied to
another subvolume which explains the error.



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-13  6:26           ` Andrei Borzenkov
@ 2019-06-13 21:22             ` Eric Mesa
  2019-06-14  3:55               ` Chris Murphy
  2019-06-18  4:15               ` Andrei Borzenkov
  0 siblings, 2 replies; 14+ messages in thread
From: Eric Mesa @ 2019-06-13 21:22 UTC (permalink / raw)
  To: Andrei Borzenkov; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 728 bytes --]

On Thursday, June 13, 2019 2:26:10 AM EDT Andrei Borzenkov wrote:
> 
> All your snapshots on source have the same received_uuid (I have no idea
> how is it possible). If received_uuid exists, it is sent to destination
> instead of subvolume UUID to identify matching snapshot. All your backup
> sbapshots on destination also have the same received_uuid which is
> matched against (received_)UUID of source subvolume. In this case
> receive command takes the first found subvolume (probably the most
> recent, i.e. with the smallest generation number). So you send
> differential stream against one subvolume and this stream is applied to
> another subvolume which explains the error.

Yup. Any idea of how to fix? 

--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-13 21:22             ` Eric Mesa
@ 2019-06-14  3:55               ` Chris Murphy
  2019-07-14 20:59                 ` Eric Mesa
  2019-06-18  4:15               ` Andrei Borzenkov
  1 sibling, 1 reply; 14+ messages in thread
From: Chris Murphy @ 2019-06-14  3:55 UTC (permalink / raw)
  To: Eric Mesa; +Cc: Andrei Borzenkov, Chris Murphy, Btrfs BTRFS

On Thu, Jun 13, 2019 at 3:23 PM Eric Mesa <eric@ericmesa.com> wrote:
>
> On Thursday, June 13, 2019 2:26:10 AM EDT Andrei Borzenkov wrote:
> >
> > All your snapshots on source have the same received_uuid (I have no idea
> > how is it possible). If received_uuid exists, it is sent to destination
> > instead of subvolume UUID to identify matching snapshot. All your backup
> > sbapshots on destination also have the same received_uuid which is
> > matched against (received_)UUID of source subvolume. In this case
> > receive command takes the first found subvolume (probably the most
> > recent, i.e. with the smallest generation number). So you send
> > differential stream against one subvolume and this stream is applied to
> > another subvolume which explains the error.
>
> Yup. Any idea of how to fix?

Maybe 'cp -a --relink' into a new subvolume on the source. It won't
complete immediately like a snapshot. But it'll complete way faster
than a normal data copy. From that point, this new subvolume becomes
"master" where all changes occur, and all the other snapshots are made
from it.

Also, you should do incrementals between the most recent two
snapshots. i.e. the snapshot that follows -p should be the snapshot
most recently successfully received on the destination. That
represents the least amount of increment needed to update the
destination. It will work the way you're doing it now, with -p being
an older snapshot, but you're unnecessarily sending a lot more data
every time.


-- 
Chris Murphy

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-13 21:22             ` Eric Mesa
  2019-06-14  3:55               ` Chris Murphy
@ 2019-06-18  4:15               ` Andrei Borzenkov
  1 sibling, 0 replies; 14+ messages in thread
From: Andrei Borzenkov @ 2019-06-18  4:15 UTC (permalink / raw)
  To: Eric Mesa; +Cc: Chris Murphy, Btrfs BTRFS

[-- Attachment #1.1: Type: text/plain, Size: 1016 bytes --]

14.06.2019 0:22, Eric Mesa пишет:
> On Thursday, June 13, 2019 2:26:10 AM EDT Andrei Borzenkov wrote:
>>
>> All your snapshots on source have the same received_uuid (I have no idea
>> how is it possible). If received_uuid exists, it is sent to destination
>> instead of subvolume UUID to identify matching snapshot. All your backup
>> sbapshots on destination also have the same received_uuid which is
>> matched against (received_)UUID of source subvolume. In this case
>> receive command takes the first found subvolume (probably the most
>> recent, i.e. with the smallest generation number). So you send
>> differential stream against one subvolume and this stream is applied to
>> another subvolume which explains the error.
> 
> Yup. Any idea of how to fix? 
> 


I do not think there is easy way to fix it for existing subvolumes. So
remove existing ones, and start replication from scratch making sure you
do not have duplicated received_uuid on either source or destination sides.


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Issues with btrfs send/receive with parents
  2019-06-14  3:55               ` Chris Murphy
@ 2019-07-14 20:59                 ` Eric Mesa
  0 siblings, 0 replies; 14+ messages in thread
From: Eric Mesa @ 2019-07-14 20:59 UTC (permalink / raw)
  To: Chris Murphy; +Cc: Andrei Borzenkov, Btrfs BTRFS

[-- Attachment #1: Type: text/plain, Size: 1894 bytes --]

On Thursday, June 13, 2019 11:55:05 PM EDT Chris Murphy wrote:
> On Thu, Jun 13, 2019 at 3:23 PM Eric Mesa <eric@ericmesa.com> wrote:
> > On Thursday, June 13, 2019 2:26:10 AM EDT Andrei Borzenkov wrote:
> > > All your snapshots on source have the same received_uuid (I have no idea
> > > how is it possible). If received_uuid exists, it is sent to destination
> > > instead of subvolume UUID to identify matching snapshot. All your backup
> > > sbapshots on destination also have the same received_uuid which is
> > > matched against (received_)UUID of source subvolume. In this case
> > > receive command takes the first found subvolume (probably the most
> > > recent, i.e. with the smallest generation number). So you send
> > > differential stream against one subvolume and this stream is applied to
> > > another subvolume which explains the error.
> > 
> > Yup. Any idea of how to fix?
> 
> Maybe 'cp -a --relink' into a new subvolume on the source. It won't
> complete immediately like a snapshot. But it'll complete way faster
> than a normal data copy. From that point, this new subvolume becomes
> "master" where all changes occur, and all the other snapshots are made
> from it.
> 
> Also, you should do incrementals between the most recent two
> snapshots. i.e. the snapshot that follows -p should be the snapshot
> most recently successfully received on the destination. That
> represents the least amount of increment needed to update the
> destination. It will work the way you're doing it now, with -p being
> an older snapshot, but you're unnecessarily sending a lot more data
> every time.
Just in case anyone is searching the net with the same issue, I want to 
confirm that this worked. Ever since moving to a clean /home subvol (didn't 
have a recieved_UUID) everything has worked perfectly with respect to the 
issue I'd emailed the mailing list about. 

-- 
--
Eric Mesa

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-10 23:56 Issues with btrfs send/receive with parents Eric Mesa
2019-06-11  1:10 ` Chris Murphy
2019-06-11  3:39   ` Andrei Borzenkov
2019-06-11  4:19     ` Eric Mesa
2019-06-12  5:43       ` Andrei Borzenkov
2019-06-12 23:03         ` Eric Mesa
2019-06-12 23:11           ` Eric Mesa
2019-06-13  6:26           ` Andrei Borzenkov
2019-06-13 21:22             ` Eric Mesa
2019-06-14  3:55               ` Chris Murphy
2019-07-14 20:59                 ` Eric Mesa
2019-06-18  4:15               ` Andrei Borzenkov
2019-06-11  3:47   ` Eric Mesa
2019-06-11  1:11 ` Remi Gauvin

Linux-BTRFS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-btrfs/0 linux-btrfs/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-btrfs linux-btrfs/ https://lore.kernel.org/linux-btrfs \
		linux-btrfs@vger.kernel.org linux-btrfs@archiver.kernel.org
	public-inbox-index linux-btrfs


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-btrfs


AGPL code for this site: git clone https://public-inbox.org/ public-inbox