[RFC]: can-next 2020-09-16

[RFC]: can-next 2020-09-16

[Marc Kleine-Budde]

Hello,

during pengutronix annually techweek, I had time to look dig through the
linux-can mailinglist and pick up some patches. This will be the next pull
request to net-next.

There will be a separate series for flexcan (soonish) and m_can (later).

regards,
Marc

[PATCH 01/37] can: grcan: fix spelling mistake "buss" -> "bus"

[Marc Kleine-Budde]

From: Colin Ian King <colin.king@canonical.com>

There is a spelling mistake in a netdev_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200806105616.46790-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/grcan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c
index 378200b682fa..5d1f15843181 100644
--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -726,7 +726,7 @@ static void grcan_err(struct net_device *dev, u32 sources, u32 status)
 			txrx = "on rx ";
 			stats->rx_errors++;
 		}
-		netdev_err(dev, "Fatal AHB buss error %s- halting device\n",
+		netdev_err(dev, "Fatal AHB bus error %s- halting device\n",
 			   txrx);
 
 		spin_lock_irqsave(&priv->lock, flags);
-- 
2.28.0

[PATCH 02/37] can: flexcan: fix spelling mistake "reserverd" -> "reserved"

[Marc Kleine-Budde]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Fix a mistake in a register layout description.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 94d10ec954a0..19403e88daa3 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -230,7 +230,7 @@ struct flexcan_regs {
 	/* FIFO-mode:
 	 *			MB
 	 * 0x080...0x08f	0	RX message buffer
-	 * 0x090...0x0df	1-5	reserverd
+	 * 0x090...0x0df	1-5	reserved
 	 * 0x0e0...0x0ff	6-7	8 entry ID table
 	 *				(mx25, mx28, mx35, mx53)
 	 * 0x0e0...0x2df	6-7..37	8..128 entry ID table
-- 
2.28.0

[PATCH 03/37] can: include: fix spelling mistakes

[Marc Kleine-Budde]

This patch fixes spelling erros found by "codespell" in the
include/linux/can subtree.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 include/linux/can/core.h | 2 +-
 include/linux/can/dev.h  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index e20a0cd09ba5..7da9f1f82e8e 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -2,7 +2,7 @@
 /*
  * linux/can/core.h
  *
- * Protoypes and definitions for CAN protocol modules using the PF_CAN core
+ * Prototypes and definitions for CAN protocol modules using the PF_CAN core
  *
  * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
  *          Urs Thuermann   <urs.thuermann@volkswagen.de>
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 5e3d45525bd3..516892566ac9 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -108,7 +108,7 @@ static inline bool can_skb_headroom_valid(struct net_device *dev,
 
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-		/* preform proper loopback on capable devices */
+		/* perform proper loopback on capable devices */
 		if (dev->flags & IFF_ECHO)
 			skb->pkt_type = PACKET_LOOPBACK;
 		else
-- 
2.28.0

[PATCH 04/37] can: net: fix spelling mistakes

[Marc Kleine-Budde]

This patch fixes spelling erros found by "codespell" in the net/can
subtree.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 net/can/af_can.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/can/af_can.c b/net/can/af_can.c
index 5c06404bdf3e..ea29a6d97ef5 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -358,7 +358,7 @@ static unsigned int effhash(canid_t can_id)
  *
  * Return:
  *  Pointer to optimal filterlist for the given can_id/mask pair.
- *  Constistency checked mask.
+ *  Consistency checked mask.
  *  Reduced can_id to have a preprocessed filter compare value.
  */
 static struct hlist_head *can_rcv_list_find(canid_t *can_id, canid_t *mask,
@@ -411,7 +411,7 @@ static struct hlist_head *can_rcv_list_find(canid_t *can_id, canid_t *mask,
 /**
  * can_rx_register - subscribe CAN frames from a specific interface
  * @net: the applicable net namespace
- * @dev: pointer to netdevice (NULL => subcribe from 'all' CAN devices list)
+ * @dev: pointer to netdevice (NULL => subscribe from 'all' CAN devices list)
  * @can_id: CAN identifier (see description)
  * @mask: CAN mask (see description)
  * @func: callback function on filter match
-- 
2.28.0

[PATCH 05/37] can: drivers: fix spelling mistakes

[Marc Kleine-Budde]

This patch fixes spelling erros found by "codespell" in the
drivers/net/can subtree.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/at91_can.c                  | 8 ++++----
 drivers/net/can/cc770/cc770.c               | 2 +-
 drivers/net/can/cc770/cc770.h               | 2 +-
 drivers/net/can/grcan.c                     | 2 +-
 drivers/net/can/m_can/Kconfig               | 2 +-
 drivers/net/can/pch_can.c                   | 4 ++--
 drivers/net/can/sja1000/peak_pci.c          | 2 +-
 drivers/net/can/sja1000/peak_pcmcia.c       | 2 +-
 drivers/net/can/softing/Kconfig             | 4 ++--
 drivers/net/can/softing/softing_fw.c        | 8 ++++----
 drivers/net/can/softing/softing_main.c      | 8 ++++----
 drivers/net/can/softing/softing_platform.h  | 2 +-
 drivers/net/can/ti_hecc.c                   | 2 +-
 drivers/net/can/usb/Kconfig                 | 2 +-
 drivers/net/can/usb/gs_usb.c                | 4 ++--
 drivers/net/can/usb/mcba_usb.c              | 2 +-
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c  | 4 ++--
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
 drivers/net/can/usb/ucan.c                  | 4 ++--
 drivers/net/can/usb/usb_8dev.c              | 4 ++--
 drivers/net/can/xilinx_can.c                | 2 +-
 21 files changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 38e9f80ed1ef..c14de95d2ca7 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -643,7 +643,7 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
  *
  * The first message goes into mb nr. 1 and issues an interrupt. All
  * rx ints are disabled in the interrupt handler and a napi poll is
- * scheduled. We read the mailbox, but do _not_ reenable the mb (to
+ * scheduled. We read the mailbox, but do _not_ re-enable the mb (to
  * receive another message).
  *
  *    lower mbxs      upper
@@ -661,13 +661,13 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
  *
  * The variable priv->rx_next points to the next mailbox to read a
  * message from. As long we're in the lower mailboxes we just read the
- * mailbox but not reenable it.
+ * mailbox but not re-enable it.
  *
- * With completion of the last of the lower mailboxes, we reenable the
+ * With completion of the last of the lower mailboxes, we re-enable the
  * whole first group, but continue to look for filled mailboxes in the
  * upper mailboxes. Imagine the second group like overflow mailboxes,
  * which takes CAN messages if the lower goup is full. While in the
- * upper group we reenable the mailbox right after reading it. Giving
+ * upper group we re-enable the mailbox right after reading it. Giving
  * the chip more room to store messages.
  *
  * After finishing we look again in the lower group if we've still
diff --git a/drivers/net/can/cc770/cc770.c b/drivers/net/can/cc770/cc770.c
index 7cdc232cbfea..07e2b8df5153 100644
--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -538,7 +538,7 @@ static int cc770_err(struct net_device *dev, u8 status)
 			priv->can.can_stats.error_warning++;
 		}
 	} else {
-		/* Back to error avtive */
+		/* Back to error active */
 		cf->can_id |= CAN_ERR_PROT;
 		cf->data[2] = CAN_ERR_PROT_ACTIVE;
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;
diff --git a/drivers/net/can/cc770/cc770.h b/drivers/net/can/cc770/cc770.h
index 948541491ab5..0628fd9e1980 100644
--- a/drivers/net/can/cc770/cc770.h
+++ b/drivers/net/can/cc770/cc770.h
@@ -184,7 +184,7 @@ struct cc770_priv {
 	u8 control_normal_mode;	/* Control register for normal mode */
 	u8 cpu_interface;	/* CPU interface register */
 	u8 clkout;		/* Clock out register */
-	u8 bus_config;		/* Bus conffiguration register */
+	u8 bus_config;		/* Bus configuration register */
 
 	struct sk_buff *tx_skb;
 };
diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c
index 5d1f15843181..39802f107eb1 100644
--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -1243,7 +1243,7 @@ static int grcan_poll(struct napi_struct *napi, int budget)
 	int rx_budget = budget / 2;
 	int tx_budget = budget - rx_budget;
 
-	/* Half of the budget for receiveing messages */
+	/* Half of the budget for receiving messages */
 	rx_work_done = grcan_receive(dev, rx_budget);
 
 	/* Half of the budget for transmitting messages as that can trigger echo
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index d9216147ca93..48be627c85c2 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -20,5 +20,5 @@ config CAN_M_CAN_TCAN4X5X
 	tristate "TCAN4X5X M_CAN device"
 	help
 	  Say Y here if you want support for Texas Instruments TCAN4x5x
-	  M_CAN controller.  This device is a peripherial device that uses the
+	  M_CAN controller.  This device is a peripheral device that uses the
 	  SPI bus for communication.
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index db41dddd5771..af4fbd8f9077 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -461,7 +461,7 @@ static void pch_can_int_clr(struct pch_can_priv *priv, u32 mask)
 			       PCH_ID2_DIR | (0x7ff << 2));
 		iowrite32(0x0, &priv->regs->ifregs[1].id1);
 
-		/* Claring NewDat, TxRqst & IntPnd */
+		/* Clearing NewDat, TxRqst & IntPnd */
 		pch_can_bit_clear(&priv->regs->ifregs[1].mcont,
 				  PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_INTPND |
 				  PCH_IF_MCONT_TXRQXT);
@@ -834,7 +834,7 @@ static int pch_can_open(struct net_device *ndev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	int retval;
 
-	/* Regstering the interrupt. */
+	/* Registering the interrupt. */
 	retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
 			     ndev->name, ndev);
 	if (retval) {
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 8c0244f51059..4713921bd511 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -97,7 +97,7 @@ MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
 /* GPIOICR byte access offsets */
 #define PITA_GPOUT		0x18	/* GPx output value */
 #define PITA_GPIN		0x19	/* GPx input value */
-#define PITA_GPOEN		0x1A	/* configure GPx as ouput pin */
+#define PITA_GPOEN		0x1A	/* configure GPx as output pin */
 
 /* I2C GP bits */
 #define PITA_GPIN_SCL		0x01	/* Serial Clock Line */
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index 5e0d5e8101c8..cf951a783078 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -671,7 +671,7 @@ static int pcan_probe(struct pcmcia_device *pdev)
 	card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR);
 	card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR);
 
-	/* display board name and firware version */
+	/* display board name and firmware version */
 	dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n",
 		pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card",
 		card->fw_major, card->fw_minor);
diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 16b9eec63490..9edc73b13014 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -5,14 +5,14 @@ config CAN_SOFTING
 	help
 	  Support for CAN cards from Softing Gmbh & some cards
 	  from Vector Gmbh.
-	  Softing Gmbh CAN cards come with 1 or 2 physical busses.
+	  Softing Gmbh CAN cards come with 1 or 2 physical buses.
 	  Those cards typically use Dual Port RAM to communicate
 	  with the host CPU. The interface is then identical for PCI
 	  and PCMCIA cards. This driver operates on a platform device,
 	  which has been created by softing_cs or softing_pci driver.
 	  Warning:
 	  The API of the card does not allow fine control per bus, but
-	  controls the 2 busses on the card together.
+	  controls the 2 buses on the card together.
 	  As such, some actions (start/stop/busoff recovery) on 1 bus
 	  must bring down the other bus too temporarily.
 
diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index 8f44fdd8804b..ccd649a8e37b 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -273,7 +273,7 @@ int softing_load_app_fw(const char *file, struct softing *card)
 			goto failed;
 		}
 
-		/* regualar data */
+		/* regular data */
 		for (sum = 0, j = 0; j < len; ++j)
 			sum += dat[j];
 		/* work in 16bit (target) */
@@ -474,14 +474,14 @@ int softing_startstop(struct net_device *dev, int up)
 	if (ret)
 		goto failed;
 	if (!bus_bitmask_start)
-		/* no busses to be brought up */
+		/* no buses to be brought up */
 		goto card_done;
 
 	if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2)
 			&& (softing_error_reporting(card->net[0])
 				!= softing_error_reporting(card->net[1]))) {
 		dev_alert(&card->pdev->dev,
-				"err_reporting flag differs for busses\n");
+				"err_reporting flag differs for buses\n");
 		goto invalid;
 	}
 	error_reporting = 0;
@@ -635,7 +635,7 @@ int softing_startstop(struct net_device *dev, int up)
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;
 		open_candev(netdev);
 		if (dev != netdev) {
-			/* notify other busses on the restart */
+			/* notify other buses on the restart */
 			softing_netdev_rx(netdev, &msg, 0);
 			++priv->can.can_stats.restarts;
 		}
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index d1ddf763b188..11b0f3bcfe80 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -170,8 +170,8 @@ static int softing_handle_1(struct softing *card)
 		msg.can_dlc = CAN_ERR_DLC;
 		msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
 		/*
-		 * service to all busses, we don't know which it was applicable
-		 * but only service busses that are online
+		 * service to all buses, we don't know which it was applicable
+		 * but only service buses that are online
 		 */
 		for (j = 0; j < ARRAY_SIZE(card->net); ++j) {
 			netdev = card->net[j];
@@ -339,7 +339,7 @@ static irqreturn_t softing_irq_thread(int irq, void *dev_id)
 			continue;
 		priv = netdev_priv(netdev);
 		if (!canif_is_active(netdev))
-			/* it makes no sense to wake dead busses */
+			/* it makes no sense to wake dead buses */
 			continue;
 		if (priv->tx.pending >= TX_ECHO_SKB_MAX)
 			continue;
@@ -374,7 +374,7 @@ static irqreturn_t softing_irq_v1(int irq, void *dev_id)
 }
 
 /*
- * netdev/candev inter-operability
+ * netdev/candev interoperability
  */
 static int softing_netdev_open(struct net_device *ndev)
 {
diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h
index 68a161547644..cd8d7904c5f0 100644
--- a/drivers/net/can/softing/softing_platform.h
+++ b/drivers/net/can/softing/softing_platform.h
@@ -19,7 +19,7 @@ struct softing_platform_data {
 	 * 16bit, shared interrupt
 	 */
 	int generation;
-	int nbus; /* # busses on device */
+	int nbus; /* # buses on device */
 	unsigned int freq; /* operating frequency in Hz */
 	unsigned int max_brp;
 	unsigned int max_sjw;
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 94b1491b569f..fc76f7ad735a 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -454,7 +454,7 @@ static int ti_hecc_get_berr_counter(const struct net_device *ndev,
 /* ti_hecc_xmit: HECC Transmit
  *
  * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
- * priority of the mailbox for tranmission is dependent upon priority setting
+ * priority of the mailbox for transmission is dependent upon priority setting
  * field in mailbox registers. The mailbox with highest value in priority field
  * is transmitted first. Only when two mailboxes have the same value in
  * priority field the highest numbered mailbox is transmitted first.
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 77fa830fe7dd..bcb331b0c958 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -90,7 +90,7 @@ config CAN_PEAK_USB
 	tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
 	help
 	  This driver supports the PEAK-System Technik USB adapters that enable
-	  access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
+	  access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD
 	  standards, that is:
 
 	  PCAN-USB             single CAN 2.0b channel USB adapter
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index a4b4b742c80c..3005157059ca 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -828,7 +828,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 
 	netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
 
-	/* dev settup */
+	/* dev setup */
 	strcpy(dev->bt_const.name, "gs_usb");
 	dev->bt_const.tseg1_min = bt_const->tseg1_min;
 	dev->bt_const.tseg1_max = bt_const->tseg1_max;
@@ -852,7 +852,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 		dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
 	}
 
-	/* can settup */
+	/* can setup */
 	dev->can.state = CAN_STATE_STOPPED;
 	dev->can.clock.freq = bt_const->fclk_can;
 	dev->can.bittiming_const = &dev->bt_const;
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 21faa2ec4632..eb6fb7435061 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -28,7 +28,7 @@
 #define MCBA_CTX_FREE MCBA_MAX_TX_URBS
 
 /* RX buffer must be bigger than msg size since at the
- * beggining USB messages are stacked.
+ * beginning USB messages are stacked.
  */
 #define MCBA_USB_RX_BUFF_SIZE 64
 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 47cc1ff5b88e..ab63fd9eb982 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -35,7 +35,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
 #define PCAN_UFD_RX_BUFFER_SIZE		2048
 #define PCAN_UFD_TX_BUFFER_SIZE		512
 
-/* read some versions info from the hw devcie */
+/* read some versions info from the hw device */
 struct __packed pcan_ufd_fw_info {
 	__le16	size_of;	/* sizeof this */
 	__le16	type;		/* type of this structure */
@@ -796,7 +796,7 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev)
 	return err;
 }
 
-/* socket callback used to copy berr counters values receieved through USB */
+/* socket callback used to copy berr counters values received through USB */
 static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev,
 					struct can_berr_counter *bec)
 {
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 1689ab387612..f85b560e05db 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -973,7 +973,7 @@ int pcan_usb_pro_probe(struct usb_interface *intf)
 		struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc;
 
 		/*
-		 * below is the list of valid ep addreses. Any other ep address
+		 * below is the list of valid ep addresses. Any other ep address
 		 * is considered as not-CAN interface address => no dev created
 		 */
 		switch (ep->bEndpointAddress) {
diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 81e942f713e6..dc5290b36598 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -1445,7 +1445,7 @@ static int ucan_probe(struct usb_interface *intf,
 
 	/* request the device information and store it in ctl_msg_buffer
 	 *
-	 * note: ucan_ctrl_command_* wrappers connot be used yet
+	 * note: ucan_ctrl_command_* wrappers cannot be used yet
 	 * because `up` is initialised in Stage 3
 	 */
 	ret = usb_control_msg(udev,
@@ -1494,7 +1494,7 @@ static int ucan_probe(struct usb_interface *intf,
 
 	up = netdev_priv(netdev);
 
-	/* initialze data */
+	/* initialize data */
 	up->udev = udev;
 	up->intf = intf;
 	up->netdev = netdev;
diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c
index 8fa224b28218..62749c67c959 100644
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -88,7 +88,7 @@ enum usb_8dev_cmd {
 
 /* status */
 #define USB_8DEV_STATUSMSG_OK		0x00  /* Normal condition. */
-#define USB_8DEV_STATUSMSG_OVERRUN	0x01  /* Overrun occured when sending */
+#define USB_8DEV_STATUSMSG_OVERRUN	0x01  /* Overrun occurred when sending */
 #define USB_8DEV_STATUSMSG_BUSLIGHT	0x02  /* Error counter has reached 96 */
 #define USB_8DEV_STATUSMSG_BUSHEAVY	0x03  /* Error count. has reached 128 */
 #define USB_8DEV_STATUSMSG_BUSOFF	0x04  /* Device is in BUSOFF */
@@ -165,7 +165,7 @@ struct __packed usb_8dev_rx_msg {
 /* command frame */
 struct __packed usb_8dev_cmd_msg {
 	u8 begin;
-	u8 channel;	/* unkown - always 0 */
+	u8 channel;	/* unknown - always 0 */
 	u8 command;	/* command to execute */
 	u8 opt1;	/* optional parameter / return value */
 	u8 opt2;	/* optional parameter 2 */
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index c1dbab8c896d..7ae268468d2c 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1308,7 +1308,7 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr)
 /**
  * xcan_interrupt - CAN Isr
  * @irq:	irq number
- * @dev_id:	device id poniter
+ * @dev_id:	device id pointer
  *
  * This is the xilinx CAN Isr. It checks for the type of interrupt
  * and invokes the corresponding ISR.
-- 
2.28.0

[PATCH 06/37] can: raw: fix indention

[Marc Kleine-Budde]

This patch fixes the indention to follow kernel coding style.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 net/can/raw.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/net/can/raw.c b/net/can/raw.c
index 94a9405658dc..57235b29f571 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -154,16 +154,16 @@ static void raw_rcv(struct sk_buff *oskb, void *data)
 	if (!skb)
 		return;
 
-	/*  Put the datagram to the queue so that raw_recvmsg() can
-	 *  get it from there.  We need to pass the interface index to
-	 *  raw_recvmsg().  We pass a whole struct sockaddr_can in skb->cb
-	 *  containing the interface index.
+	/* Put the datagram to the queue so that raw_recvmsg() can get
+	 * it from there. We need to pass the interface index to
+	 * raw_recvmsg(). We pass a whole struct sockaddr_can in
+	 * skb->cb containing the interface index.
 	 */
 
 	sock_skb_cb_check_size(sizeof(struct sockaddr_can));
 	addr = (struct sockaddr_can *)skb->cb;
 	memset(addr, 0, sizeof(*addr));
-	addr->can_family  = AF_CAN;
+	addr->can_family = AF_CAN;
 	addr->can_ifindex = skb->dev->ifindex;
 
 	/* add CAN specific message flags for raw_recvmsg() */
@@ -290,8 +290,8 @@ static int raw_notifier(struct notifier_block *nb,
 			kfree(ro->filter);
 
 		ro->ifindex = 0;
-		ro->bound   = 0;
-		ro->count   = 0;
+		ro->bound = 0;
+		ro->count = 0;
 		release_sock(sk);
 
 		sk->sk_err = ENODEV;
@@ -374,8 +374,8 @@ static int raw_release(struct socket *sock)
 		kfree(ro->filter);
 
 	ro->ifindex = 0;
-	ro->bound   = 0;
-	ro->count   = 0;
+	ro->bound = 0;
+	ro->count = 0;
 	free_percpu(ro->uniq);
 
 	sock_orphan(sk);
@@ -773,7 +773,7 @@ static int raw_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 	skb_setup_tx_timestamp(skb, sk->sk_tsflags);
 
 	skb->dev = dev;
-	skb->sk  = sk;
+	skb->sk = sk;
 	skb->priority = sk->sk_priority;
 
 	err = can_send(skb, ro->loopback);
@@ -801,8 +801,8 @@ static int raw_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 	int err = 0;
 	int noblock;
 
-	noblock =  flags & MSG_DONTWAIT;
-	flags   &= ~MSG_DONTWAIT;
+	noblock = flags & MSG_DONTWAIT;
+	flags &= ~MSG_DONTWAIT;
 
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb)
-- 
2.28.0

[PATCH 07/37] can: slcan: update dead link

[Marc Kleine-Budde]

From: Diego Elio Pettenò <flameeyes@flameeyes.com>

BerliOS has not been operating for more than five years. linux-can moved to
GitHub.

Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Link: https://lore.kernel.org/r/20200413170241.13207-1-flameeyes@flameeyes.com
[mkl: split into two patches - handle slcan part here]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index f07012a76c0c..424970939fd4 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -41,8 +41,8 @@ config CAN_SLCAN
 	  www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de
 
 	  Userspace tools to attach the SLCAN line discipline (slcan_attach,
-	  slcand) can be found in the can-utils at the SocketCAN SVN, see
-	  http://developer.berlios.de/projects/socketcan for details.
+	  slcand) can be found in the can-utils at the linux-can project, see
+	  https://github.com/linux-can/can-utils for details.
 
 	  The slcan driver supports up to 10 CAN netdevices by default which
 	  can be changed by the 'maxdev=xx' module option. This driver can
-- 
2.28.0

[PATCH 08/37] can: softing: update dead link

[Marc Kleine-Budde]

From: Diego Elio Pettenò <flameeyes@flameeyes.com>

BerliOS has not been operating for more than five years. linux-can moved to
GitHub.

Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Link: https://lore.kernel.org/r/20200413170241.13207-1-flameeyes@flameeyes.com
[mkl: split into two patches - handle softing part here]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/softing/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 9edc73b13014..8afd7d0a1000 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -24,7 +24,7 @@ config CAN_SOFTING_CS
 	  Support for PCMCIA cards from Softing Gmbh & some cards
 	  from Vector Gmbh.
 	  You need firmware for these, which you can get at
-	  http://developer.berlios.de/projects/socketcan/
+	  https://github.com/linux-can/can-firmware
 	  This version of the driver is written against
 	  firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
 	  In order to use the card as CAN device, you need the Softing generic
-- 
2.28.0

[PATCH 09/37] can: remove "WITH Linux-syscall-note" from SPDX tag of C files

[Marc Kleine-Budde]

From: Masahiro Yamada <masahiroy@kernel.org>

The "WITH Linux-syscall-note" exception is intended for UAPI headers.

See LICENSES/exceptions/Linux-syscall-note

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 net/can/bcm.c  | 2 +-
 net/can/gw.c   | 2 +-
 net/can/proc.c | 2 +-
 net/can/raw.c  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index d14ea12affb1..4253915800e6 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content
  *
diff --git a/net/can/gw.c b/net/can/gw.c
index 65d60c93af29..49b4e3d91ad6 100644
--- a/net/can/gw.c
+++ b/net/can/gw.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /* gw.c - CAN frame Gateway/Router/Bridge with netlink interface
  *
  * Copyright (c) 2019 Volkswagen Group Electronic Research
diff --git a/net/can/proc.c b/net/can/proc.c
index e6881bfc3ed1..a4eb06c9eb70 100644
--- a/net/can/proc.c
+++ b/net/can/proc.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * proc.c - procfs support for Protocol family CAN core module
  *
diff --git a/net/can/raw.c b/net/can/raw.c
index 57235b29f571..24db4b4afdc7 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /* raw.c - Raw sockets for protocol family CAN
  *
  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
-- 
2.28.0

[PATCH 10/37] can: dev: can_put_echo_skb(): print number of echo_skb that is occupied

[Marc Kleine-Budde]

This patch prints the number of the occupied echo_skb, to ease
implementing and debugging of new drivers.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 68834a2853c9..dd443e5d8cb7 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -463,7 +463,7 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 		priv->echo_skb[idx] = skb;
 	} else {
 		/* locking problem with netif_stop_queue() ?? */
-		netdev_err(dev, "%s: BUG! echo_skb is occupied!\n", __func__);
+		netdev_err(dev, "%s: BUG! echo_skb %d is occupied!\n", __func__, idx);
 		kfree_skb(skb);
 	}
 }
-- 
2.28.0

[PATCH 11/37] can: dev: can_put_echo_skb(): propagate error in case of errors

[Marc Kleine-Budde]

The function can_put_echo_skb() can fail for several reasons. It may
fail due to OOM, but when it fails it's usually due to locking problems
in the driver.

In order to help developing and debugging of new drivers propagate error
value in case of errors.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c   | 11 +++++++----
 include/linux/can/dev.h |  4 ++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index dd443e5d8cb7..77a5663693af 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -434,8 +434,8 @@ static void can_flush_echo_skb(struct net_device *dev)
  * of the device driver. The driver must protect access to
  * priv->echo_skb, if necessary.
  */
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
-		      unsigned int idx)
+int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		     unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
@@ -446,13 +446,13 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 	    (skb->protocol != htons(ETH_P_CAN) &&
 	     skb->protocol != htons(ETH_P_CANFD))) {
 		kfree_skb(skb);
-		return;
+		return 0;
 	}
 
 	if (!priv->echo_skb[idx]) {
 		skb = can_create_echo_skb(skb);
 		if (!skb)
-			return;
+			return -ENOMEM;
 
 		/* make settings for echo to reduce code in irq context */
 		skb->pkt_type = PACKET_BROADCAST;
@@ -465,7 +465,10 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 		/* locking problem with netif_stop_queue() ?? */
 		netdev_err(dev, "%s: BUG! echo_skb %d is occupied!\n", __func__, idx);
 		kfree_skb(skb);
+		return -EBUSY;
 	}
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(can_put_echo_skb);
 
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 516892566ac9..ed0482b2f4b2 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -201,8 +201,8 @@ void can_bus_off(struct net_device *dev);
 void can_change_state(struct net_device *dev, struct can_frame *cf,
 		      enum can_state tx_state, enum can_state rx_state);
 
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
-		      unsigned int idx);
+int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		     unsigned int idx);
 struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx,
 				   u8 *len_ptr);
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
-- 
2.28.0

[PATCH 12/37] can: dev: can_change_state(): print human readable state change messages

[Marc Kleine-Budde]

In order to ease debugging let can_change_state() print the human readable
state change messages. Also print the old and new state.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 77a5663693af..e0caf969e342 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -371,6 +371,28 @@ static int can_rx_state_to_frame(struct net_device *dev, enum can_state state)
 	}
 }
 
+static const char *can_get_state_str(const enum can_state state)
+{
+	switch (state) {
+	case CAN_STATE_ERROR_ACTIVE:
+		return "Error Active";
+	case CAN_STATE_ERROR_WARNING:
+		return "Error Warning";
+	case CAN_STATE_ERROR_PASSIVE:
+		return "Error Passive";
+	case CAN_STATE_BUS_OFF:
+		return "Bus Off";
+	case CAN_STATE_STOPPED:
+		return "Stopped";
+	case CAN_STATE_SLEEPING:
+		return "Sleeping";
+	default:
+		return "<unknown>";
+	}
+
+	return "<unknown>";
+}
+
 void can_change_state(struct net_device *dev, struct can_frame *cf,
 		      enum can_state tx_state, enum can_state rx_state)
 {
@@ -382,7 +404,9 @@ void can_change_state(struct net_device *dev, struct can_frame *cf,
 		return;
 	}
 
-	netdev_dbg(dev, "New error state: %d\n", new_state);
+	netdev_dbg(dev, "Controller changed from %s State (%d) into %s State (%d).\n",
+		   can_get_state_str(priv->state), priv->state,
+		   can_get_state_str(new_state), new_state);
 
 	can_update_state_error_stats(dev, new_state);
 	priv->state = new_state;
-- 
2.28.0

[PATCH 13/37] can: dev: can_bus_off(): print scheduling of restart if activated

[Marc Kleine-Budde]

If a CAN device goes into bus-off and has automatic restart enabled, inform
user that a automatic restart is scheduled after the configured delay.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index e0caf969e342..3c40bba71d5b 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -639,7 +639,11 @@ void can_bus_off(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	netdev_info(dev, "bus-off\n");
+	if (priv->restart_ms)
+		netdev_info(dev, "bus-off, scheduling restart in %d ms\n",
+			    priv->restart_ms);
+	else
+		netdev_info(dev, "bus-off\n");
 
 	netif_carrier_off(dev);
 
-- 
2.28.0

[PATCH 14/37] can: c_can: Remove unused inline function

[Marc Kleine-Budde]

From: YueHaibing <yuehaibing@huawei.com>

commit 524369e2391f ("can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option")
left behind this, remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200505084149.23848-1-yuehaibing@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 8e9f5620c9a2..1ccdbe89585b 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -356,15 +356,6 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface,
 	}
 }
 
-static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
-						       int iface)
-{
-	int i;
-
-	for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++)
-		c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT);
-}
-
 static int c_can_handle_lost_msg_obj(struct net_device *dev,
 				     int iface, int objno, u32 ctrl)
 {
-- 
2.28.0

[PATCH 15/37] can: mcba_usb: remove redundant initialization of variable err

[Marc Kleine-Budde]

From: Colin Ian King <colin.king@canonical.com>

The variable err is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200706164240.518623-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/mcba_usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index eb6fb7435061..5857b37dcd96 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -793,7 +793,7 @@ static int mcba_usb_probe(struct usb_interface *intf,
 {
 	struct net_device *netdev;
 	struct mcba_priv *priv;
-	int err = -ENOMEM;
+	int err;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
 
 	netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
-- 
2.28.0

[PATCH 16/37] can: mscan: mark expected switch fall-through

[Marc Kleine-Budde]

As -Wimplicit-fallthrough is now enabled the mscan driver shows this warning,
which is fixed by this patch:

drivers/net/can/mscan/mscan.c: In function ‘mscan_start_xmit’:
drivers/net/can/mscan/mscan.c:211:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
  211 |   netif_stop_queue(dev);
      |   ^~~~~~~~~~~~~~~~~~~~~
drivers/net/can/mscan/mscan.c:212:2: note: here
  212 |  case 2:
      |  ^~~~

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mscan/mscan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 99101d7027a8..0b3532dd50e2 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -209,6 +209,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * since buffer with lower id have higher priority (hell..)
 		 */
 		netif_stop_queue(dev);
+		fallthrough;
 	case 2:
 		if (buf_id < priv->prev_buf_id) {
 			priv->cur_pri++;
-- 
2.28.0

[PATCH 17/37] can: ti_hecc: convert to devm_platform_ioremap_resource_byname()

[Marc Kleine-Budde]

From: Dejin Zheng <zhengdejin5@gmail.com>

Use the function devm_platform_ioremap_resource_byname() to simplify
source code which calls the functions platform_get_resource_byname()
and devm_ioremap_resource(). Remove also a few error messages which
became unnecessary with this software refactoring.

Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Link: https://lore.kernel.org/r/20200420132207.8536-1-zhengdejin5@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/ti_hecc.c | 27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index fc76f7ad735a..1d63006c97bc 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -857,7 +857,7 @@ static int ti_hecc_probe(struct platform_device *pdev)
 	struct net_device *ndev = (struct net_device *)0;
 	struct ti_hecc_priv *priv;
 	struct device_node *np = pdev->dev.of_node;
-	struct resource *res, *irq;
+	struct resource *irq;
 	struct regulator *reg_xceiver;
 	int err = -ENODEV;
 
@@ -878,39 +878,22 @@ static int ti_hecc_probe(struct platform_device *pdev)
 	priv = netdev_priv(ndev);
 
 	/* handle hecc memory */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hecc");
-	if (!res) {
-		dev_err(&pdev->dev, "can't get IORESOURCE_MEM hecc\n");
-		return -EINVAL;
-	}
-
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_ioremap_resource_byname(pdev, "hecc");
 	if (IS_ERR(priv->base)) {
 		dev_err(&pdev->dev, "hecc ioremap failed\n");
 		return PTR_ERR(priv->base);
 	}
 
 	/* handle hecc-ram memory */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hecc-ram");
-	if (!res) {
-		dev_err(&pdev->dev, "can't get IORESOURCE_MEM hecc-ram\n");
-		return -EINVAL;
-	}
-
-	priv->hecc_ram = devm_ioremap_resource(&pdev->dev, res);
+	priv->hecc_ram = devm_platform_ioremap_resource_byname(pdev,
+							       "hecc-ram");
 	if (IS_ERR(priv->hecc_ram)) {
 		dev_err(&pdev->dev, "hecc-ram ioremap failed\n");
 		return PTR_ERR(priv->hecc_ram);
 	}
 
 	/* handle mbx memory */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mbx");
-	if (!res) {
-		dev_err(&pdev->dev, "can't get IORESOURCE_MEM mbx\n");
-		return -EINVAL;
-	}
-
-	priv->mbx = devm_ioremap_resource(&pdev->dev, res);
+	priv->mbx = devm_platform_ioremap_resource_byname(pdev, "mbx");
 	if (IS_ERR(priv->mbx)) {
 		dev_err(&pdev->dev, "mbx ioremap failed\n");
 		return PTR_ERR(priv->mbx);
-- 
2.28.0

[PATCH 18/37] can: peak_usb: convert to use le32_add_cpu()

[Marc Kleine-Budde]

From: Liu Shixin <liushixin2@huawei.com>

Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200914041744.3701840-1-liushixin2@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index f85b560e05db..c7564773fb2b 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -186,7 +186,7 @@ static int pcan_msg_add_rec(struct pcan_usb_pro_msg *pm, int id, ...)
 
 	len = pc - pm->rec_ptr;
 	if (len > 0) {
-		*pm->u.rec_cnt = cpu_to_le32(le32_to_cpu(*pm->u.rec_cnt) + 1);
+		le32_add_cpu(pm->u.rec_cnt, 1);
 		*pm->rec_ptr = id;
 
 		pm->rec_ptr = pc;
-- 
2.28.0

[PATCH 19/37] can: peak_canfd: Remove unused macros

[Marc Kleine-Budde]

From: Wang Hai <wanghai38@huawei.com>

CANFD_CLK_SEL_DIV_MASK and CANFD_OPTIONS_SET are
never used after they were introduced. Remove them.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20200904131247.23021-1-wanghai38@huawei.com
[mkl: keep CANFD_CLK_SEL_DIV_MASK for documentation purpose]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/peak_canfd/peak_pciefd_main.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c
index 9469d4421afe..0df1cdfa6835 100644
--- a/drivers/net/can/peak_canfd/peak_pciefd_main.c
+++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c
@@ -116,8 +116,6 @@ MODULE_LICENSE("GPL v2");
 #define CANFD_CTL_IRQ_CL_DEF	16	/* Rx msg max nb per IRQ in Rx DMA */
 #define CANFD_CTL_IRQ_TL_DEF	10	/* Time before IRQ if < CL (x100 µs) */
 
-#define CANFD_OPTIONS_SET	(CANFD_OPTION_ERROR | CANFD_OPTION_BUSLOAD)
-
 /* Tx anticipation window (link logical address should be aligned on 2K
  * boundary)
  */
-- 
2.28.0

[PATCH 20/37] can: pch_can: use generic power management

[Marc Kleine-Budde]

From: Vaibhav Gupta <vaibhavgupta40@gmail.com>

Drivers using legacy power management .suspen()/.resume() callbacks have to
manage PCI states and device's PM states themselves. They also need to take
care of standard configuration registers.

Switch to generic power management framework using a single "struct dev_pm_ops"
variable to take the unnecessary load from the driver. This also avoids the
need for the driver to directly call most of the PCI helper functions and
device power state control functions, as through the generic framework PCI Core
takes care of the necessary operations, and drivers are required to do only
device-specific jobs.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200728085757.888620-1-vaibhavgupta40@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/pch_can.c | 63 +++++++++++++--------------------------
 1 file changed, 21 insertions(+), 42 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index af4fbd8f9077..5c180d2f3c3c 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -957,8 +957,7 @@ static void pch_can_remove(struct pci_dev *pdev)
 	free_candev(priv->ndev);
 }
 
-#ifdef CONFIG_PM
-static void pch_can_set_int_custom(struct pch_can_priv *priv)
+static void __maybe_unused pch_can_set_int_custom(struct pch_can_priv *priv)
 {
 	/* Clearing the IE, SIE and EIE bits of Can control register. */
 	pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_IE_SIE_EIE);
@@ -969,14 +968,14 @@ static void pch_can_set_int_custom(struct pch_can_priv *priv)
 }
 
 /* This function retrieves interrupt enabled for the CAN device. */
-static u32 pch_can_get_int_enables(struct pch_can_priv *priv)
+static u32 __maybe_unused pch_can_get_int_enables(struct pch_can_priv *priv)
 {
 	/* Obtaining the status of IE, SIE and EIE interrupt bits. */
 	return (ioread32(&priv->regs->cont) & PCH_CTRL_IE_SIE_EIE) >> 1;
 }
 
-static u32 pch_can_get_rxtx_ir(struct pch_can_priv *priv, u32 buff_num,
-			       enum pch_ifreg dir)
+static u32 __maybe_unused pch_can_get_rxtx_ir(struct pch_can_priv *priv,
+					      u32 buff_num, enum pch_ifreg dir)
 {
 	u32 ie, enable;
 
@@ -997,8 +996,8 @@ static u32 pch_can_get_rxtx_ir(struct pch_can_priv *priv, u32 buff_num,
 	return enable;
 }
 
-static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
-				       u32 buffer_num, int set)
+static void __maybe_unused pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
+						      u32 buffer_num, int set)
 {
 	iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
 	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
@@ -1013,7 +1012,8 @@ static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
 	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
 }
 
-static u32 pch_can_get_rx_buffer_link(struct pch_can_priv *priv, u32 buffer_num)
+static u32 __maybe_unused pch_can_get_rx_buffer_link(struct pch_can_priv *priv,
+						     u32 buffer_num)
 {
 	u32 link;
 
@@ -1027,20 +1027,19 @@ static u32 pch_can_get_rx_buffer_link(struct pch_can_priv *priv, u32 buffer_num)
 	return link;
 }
 
-static int pch_can_get_buffer_status(struct pch_can_priv *priv)
+static int __maybe_unused pch_can_get_buffer_status(struct pch_can_priv *priv)
 {
 	return (ioread32(&priv->regs->treq1) & 0xffff) |
 	       (ioread32(&priv->regs->treq2) << 16);
 }
 
-static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_can_suspend(struct device *dev_d)
 {
 	int i;
-	int retval;
 	u32 buf_stat;	/* Variable for reading the transmit buffer status. */
 	int counter = PCH_COUNTER_LIMIT;
 
-	struct net_device *dev = pci_get_drvdata(pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
 	struct pch_can_priv *priv = netdev_priv(dev);
 
 	/* Stop the CAN controller */
@@ -1058,7 +1057,7 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 		udelay(1);
 	}
 	if (!counter)
-		dev_err(&pdev->dev, "%s -> Transmission time out.\n", __func__);
+		dev_err(dev_d, "%s -> Transmission time out.\n", __func__);
 
 	/* Save interrupt configuration and then disable them */
 	priv->int_enables = pch_can_get_int_enables(priv);
@@ -1081,35 +1080,16 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	/* Disable all Receive buffers */
 	pch_can_set_rx_all(priv, 0);
-	retval = pci_save_state(pdev);
-	if (retval) {
-		dev_err(&pdev->dev, "pci_save_state failed.\n");
-	} else {
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_disable_device(pdev);
-		pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	}
 
-	return retval;
+	return 0;
 }
 
-static int pch_can_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_can_resume(struct device *dev_d)
 {
 	int i;
-	int retval;
-	struct net_device *dev = pci_get_drvdata(pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
 	struct pch_can_priv *priv = netdev_priv(dev);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	retval = pci_enable_device(pdev);
-	if (retval) {
-		dev_err(&pdev->dev, "pci_enable_device failed.\n");
-		return retval;
-	}
-
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
 	/* Disabling all interrupts. */
@@ -1146,12 +1126,8 @@ static int pch_can_resume(struct pci_dev *pdev)
 	/* Restore Run Mode */
 	pch_can_set_run_mode(priv, PCH_CAN_RUN);
 
-	return retval;
+	return 0;
 }
-#else
-#define pch_can_suspend NULL
-#define pch_can_resume NULL
-#endif
 
 static int pch_can_get_berr_counter(const struct net_device *dev,
 				    struct can_berr_counter *bec)
@@ -1252,13 +1228,16 @@ static int pch_can_probe(struct pci_dev *pdev,
 	return rc;
 }
 
+static SIMPLE_DEV_PM_OPS(pch_can_pm_ops,
+			 pch_can_suspend,
+			 pch_can_resume);
+
 static struct pci_driver pch_can_pci_driver = {
 	.name = "pch_can",
 	.id_table = pch_pci_tbl,
 	.probe = pch_can_probe,
 	.remove = pch_can_remove,
-	.suspend = pch_can_suspend,
-	.resume = pch_can_resume,
+	.driver.pm = &pch_can_pm_ops,
 };
 
 module_pci_driver(pch_can_pci_driver);
-- 
2.28.0

[PATCH 21/37] can: pcan_usb: Document the commands sent to the device

[Marc Kleine-Budde]

From: Stephane Grosjean <s.grosjean@peak-system.com>

This patch documents the functions and numbers of the commands sent by the
driver to the PCAN-USB CAN device from PEAK-System GmbH.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c | 33 +++++++++++++++++++------
 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 66d0198e7834..76468250cabf 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -34,6 +34,22 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
 #define PCAN_USB_CMD_LEN		(PCAN_USB_CMD_ARGS + \
 					 PCAN_USB_CMD_ARGS_LEN)
 
+/* PCAN-USB commands */
+#define PCAN_USB_CMD_BITRATE	1
+#define PCAN_USB_CMD_SET_BUS	3
+#define PCAN_USB_CMD_DEVID	4
+#define PCAN_USB_CMD_SN		6
+#define PCAN_USB_CMD_REGISTER	9
+#define PCAN_USB_CMD_EXT_VCC	10
+
+/* PCAN_USB_CMD_SET_BUS number arg */
+#define PCAN_USB_BUS_XCVER		2
+#define PCAN_USB_BUS_SILENT_MODE	3
+
+/* PCAN_USB_CMD_xxx functions */
+#define PCAN_USB_GET		1
+#define PCAN_USB_SET		2
+
 /* PCAN-USB command timeout (ms.) */
 #define PCAN_USB_COMMAND_TIMEOUT	1000
 
@@ -172,7 +188,8 @@ static int pcan_usb_set_sja1000(struct peak_usb_device *dev, u8 mode)
 		[1] = mode,
 	};
 
-	return pcan_usb_send_cmd(dev, 9, 2, args);
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_REGISTER, PCAN_USB_SET,
+				 args);
 }
 
 static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff)
@@ -181,7 +198,8 @@ static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff)
 		[0] = !!onoff,
 	};
 
-	return pcan_usb_send_cmd(dev, 3, 2, args);
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, PCAN_USB_BUS_XCVER,
+				 args);
 }
 
 static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff)
@@ -190,7 +208,8 @@ static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff)
 		[0] = !!onoff,
 	};
 
-	return pcan_usb_send_cmd(dev, 3, 3, args);
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS,
+				 PCAN_USB_BUS_SILENT_MODE, args);
 }
 
 static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
@@ -199,7 +218,7 @@ static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
 		[0] = !!onoff,
 	};
 
-	return pcan_usb_send_cmd(dev, 10, 2, args);
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args);
 }
 
 /*
@@ -223,7 +242,7 @@ static int pcan_usb_set_bittiming(struct peak_usb_device *dev,
 	args[0] = btr1;
 	args[1] = btr0;
 
-	return pcan_usb_send_cmd(dev, 1, 2, args);
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_BITRATE, PCAN_USB_SET, args);
 }
 
 /*
@@ -307,7 +326,7 @@ static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number)
 	u8 args[PCAN_USB_CMD_ARGS_LEN];
 	int err;
 
-	err = pcan_usb_wait_rsp(dev, 6, 1, args);
+	err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_SN, PCAN_USB_GET, args);
 	if (err) {
 		netdev_err(dev->netdev, "getting serial failure: %d\n", err);
 	} else if (serial_number) {
@@ -328,7 +347,7 @@ static int pcan_usb_get_device_id(struct peak_usb_device *dev, u32 *device_id)
 	u8 args[PCAN_USB_CMD_ARGS_LEN];
 	int err;
 
-	err = pcan_usb_wait_rsp(dev, 4, 1, args);
+	err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_DEVID, PCAN_USB_GET, args);
 	if (err)
 		netdev_err(dev->netdev, "getting device id failure: %d\n", err);
 	else if (device_id)
-- 
2.28.0

[PATCH 22/37] can: pcan_usb: add support of rxerr/txerr counters

[Marc Kleine-Budde]

From: Stephane Grosjean <s.grosjean@peak-system.com>

This patch adds the support of the rx/tx errors CAN counters to the
driver of the PCAN-USB PC-CAN interface from PEAK-System GmbH.

The PCAN-USB is capable of giving back the values of the rx/tx errors
counters, to provide more details and statistics to the linux-can layer.
Getting these values allows the driver to better tune
CAN_ERR_CRTL_TX_xxx and CAN_ERR_CRTL_RX_xxx bits in case of the
interface enters any CAN_STATE_ERROR_xxx state.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c | 133 +++++++++++++++++++++---
 1 file changed, 117 insertions(+), 16 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 76468250cabf..63bd2ed96697 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -41,6 +41,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
 #define PCAN_USB_CMD_SN		6
 #define PCAN_USB_CMD_REGISTER	9
 #define PCAN_USB_CMD_EXT_VCC	10
+#define PCAN_USB_CMD_ERR_FR	11
 
 /* PCAN_USB_CMD_SET_BUS number arg */
 #define PCAN_USB_BUS_XCVER		2
@@ -82,6 +83,10 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
 #define PCAN_USB_ERROR_QOVR		0x40
 #define PCAN_USB_ERROR_TXQFULL		0x80
 
+#define PCAN_USB_ERROR_BUS		(PCAN_USB_ERROR_BUS_LIGHT | \
+					 PCAN_USB_ERROR_BUS_HEAVY | \
+					 PCAN_USB_ERROR_BUS_OFF)
+
 /* SJA1000 modes */
 #define SJA1000_MODE_NORMAL		0x00
 #define SJA1000_MODE_INIT		0x01
@@ -101,11 +106,25 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
 #define PCAN_USB_REC_TS			4
 #define PCAN_USB_REC_BUSEVT		5
 
+/* CAN bus events notifications selection mask */
+#define PCAN_USB_ERR_RXERR		0x02	/* ask for rxerr counter */
+#define PCAN_USB_ERR_TXERR		0x04	/* ask for txerr counter */
+
+/* This mask generates an usb packet each time the state of the bus changes.
+ * In other words, its interest is to know which side among rx and tx is
+ * responsible of the change of the bus state.
+ */
+#define PCAN_USB_BERR_MASK	(PCAN_USB_ERR_RXERR | PCAN_USB_ERR_TXERR)
+
+/* identify bus event packets with rx/tx error counters */
+#define PCAN_USB_ERR_CNT		0x80
+
 /* private to PCAN-USB adapter */
 struct pcan_usb {
 	struct peak_usb_device dev;
 	struct peak_time_ref time_ref;
 	struct timer_list restart_timer;
+	struct can_berr_counter bec;
 };
 
 /* incoming message context for decoding */
@@ -212,6 +231,16 @@ static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff)
 				 PCAN_USB_BUS_SILENT_MODE, args);
 }
 
+/* send the cmd to be notified from bus errors */
+static int pcan_usb_set_err_frame(struct peak_usb_device *dev, u8 err_mask)
+{
+	u8 args[PCAN_USB_CMD_ARGS_LEN] = {
+		[0] = err_mask,
+	};
+
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_ERR_FR, PCAN_USB_SET, args);
+}
+
 static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
 {
 	u8 args[PCAN_USB_CMD_ARGS_LEN] = {
@@ -445,7 +474,7 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
 			new_state = CAN_STATE_BUS_OFF;
 			break;
 		}
-		if (n & (PCAN_USB_ERROR_RXQOVR | PCAN_USB_ERROR_QOVR)) {
+		if (n & ~PCAN_USB_ERROR_BUS) {
 			/*
 			 * trick to bypass next comparison and process other
 			 * errors
@@ -469,7 +498,7 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
 			new_state = CAN_STATE_ERROR_WARNING;
 			break;
 		}
-		if (n & (PCAN_USB_ERROR_RXQOVR | PCAN_USB_ERROR_QOVR)) {
+		if (n & ~PCAN_USB_ERROR_BUS) {
 			/*
 			 * trick to bypass next comparison and process other
 			 * errors
@@ -508,29 +537,50 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
 
 	case CAN_STATE_ERROR_PASSIVE:
 		cf->can_id |= CAN_ERR_CRTL;
-		cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE |
-			       CAN_ERR_CRTL_RX_PASSIVE;
+		cf->data[1] = (mc->pdev->bec.txerr > mc->pdev->bec.rxerr) ?
+				CAN_ERR_CRTL_TX_PASSIVE :
+				CAN_ERR_CRTL_RX_PASSIVE;
+		cf->data[6] = mc->pdev->bec.txerr;
+		cf->data[7] = mc->pdev->bec.rxerr;
+
 		mc->pdev->dev.can.can_stats.error_passive++;
 		break;
 
 	case CAN_STATE_ERROR_WARNING:
 		cf->can_id |= CAN_ERR_CRTL;
-		cf->data[1] |= CAN_ERR_CRTL_TX_WARNING |
-			       CAN_ERR_CRTL_RX_WARNING;
+		cf->data[1] = (mc->pdev->bec.txerr > mc->pdev->bec.rxerr) ?
+				CAN_ERR_CRTL_TX_WARNING :
+				CAN_ERR_CRTL_RX_WARNING;
+		cf->data[6] = mc->pdev->bec.txerr;
+		cf->data[7] = mc->pdev->bec.rxerr;
+
 		mc->pdev->dev.can.can_stats.error_warning++;
 		break;
 
 	case CAN_STATE_ERROR_ACTIVE:
 		cf->can_id |= CAN_ERR_CRTL;
 		cf->data[1] = CAN_ERR_CRTL_ACTIVE;
+
+		/* sync local copies of rxerr/txerr counters */
+		mc->pdev->bec.txerr = 0;
+		mc->pdev->bec.rxerr = 0;
 		break;
 
 	default:
 		/* CAN_STATE_MAX (trick to handle other errors) */
-		cf->can_id |= CAN_ERR_CRTL;
-		cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
-		mc->netdev->stats.rx_over_errors++;
-		mc->netdev->stats.rx_errors++;
+		if (n & PCAN_USB_ERROR_TXQFULL)
+			netdev_dbg(mc->netdev, "device Tx queue full)\n");
+
+		if (n & PCAN_USB_ERROR_RXQOVR) {
+			netdev_dbg(mc->netdev, "data overrun interrupt\n");
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
+			mc->netdev->stats.rx_over_errors++;
+			mc->netdev->stats.rx_errors++;
+		}
+
+		cf->data[6] = mc->pdev->bec.txerr;
+		cf->data[7] = mc->pdev->bec.rxerr;
 
 		new_state = mc->pdev->dev.can.state;
 		break;
@@ -552,6 +602,30 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
 	return 0;
 }
 
+/* decode bus event usb packet: first byte contains rxerr while 2nd one contains
+ * txerr.
+ */
+static int pcan_usb_handle_bus_evt(struct pcan_usb_msg_context *mc, u8 ir)
+{
+	struct pcan_usb *pdev = mc->pdev;
+
+	/* acccording to the content of the packet */
+	switch (ir) {
+	case PCAN_USB_ERR_CNT:
+
+		/* save rx/tx error counters from in the device context */
+		pdev->bec.rxerr = mc->ptr[0];
+		pdev->bec.txerr = mc->ptr[1];
+		break;
+
+	default:
+		/* reserved */
+		break;
+	}
+
+	return 0;
+}
+
 /*
  * decode non-data usb message
  */
@@ -606,9 +680,10 @@ static int pcan_usb_decode_status(struct pcan_usb_msg_context *mc,
 		break;
 
 	case PCAN_USB_REC_BUSEVT:
-		/* error frame/bus event */
-		if (n & PCAN_USB_ERROR_TXQFULL)
-			netdev_dbg(mc->netdev, "device Tx queue full)\n");
+		/* bus event notifications (get rxerr/txerr) */
+		err = pcan_usb_handle_bus_evt(mc, n);
+		if (err)
+			return err;
 		break;
 	default:
 		netdev_err(mc->netdev, "unexpected function %u\n", f);
@@ -792,20 +867,44 @@ static int pcan_usb_encode_msg(struct peak_usb_device *dev, struct sk_buff *skb,
 	return 0;
 }
 
+/* socket callback used to copy berr counters values received through USB */
+static int pcan_usb_get_berr_counter(const struct net_device *netdev,
+				     struct can_berr_counter *bec)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
+
+	*bec = pdev->bec;
+
+	/* must return 0 */
+	return 0;
+}
+
 /*
  * start interface
  */
 static int pcan_usb_start(struct peak_usb_device *dev)
 {
 	struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
+	int err;
 
 	/* number of bits used in timestamps read from adapter struct */
 	peak_usb_init_time_ref(&pdev->time_ref, &pcan_usb);
 
+	pdev->bec.rxerr = 0;
+	pdev->bec.txerr = 0;
+
+	/* be notified on error counter changes (if requested by user) */
+	if (dev->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) {
+		err = pcan_usb_set_err_frame(dev, PCAN_USB_BERR_MASK);
+		if (err)
+			netdev_warn(dev->netdev,
+				    "Asking for BERR reporting error %u\n",
+				    err);
+	}
+
 	/* if revision greater than 3, can put silent mode on/off */
 	if (dev->device_rev > 3) {
-		int err;
-
 		err = pcan_usb_set_silent(dev,
 				dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY);
 		if (err)
@@ -892,7 +991,8 @@ const struct peak_usb_adapter pcan_usb = {
 	.name = "PCAN-USB",
 	.device_id = PCAN_USB_PRODUCT_ID,
 	.ctrl_count = 1,
-	.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
+	.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
+			      CAN_CTRLMODE_BERR_REPORTING,
 	.clock = {
 		.freq = PCAN_USB_CRYSTAL_HZ / 2 ,
 	},
@@ -925,4 +1025,5 @@ const struct peak_usb_adapter pcan_usb = {
 	.dev_encode_msg = pcan_usb_encode_msg,
 	.dev_start = pcan_usb_start,
 	.dev_restart_async = pcan_usb_restart_async,
+	.do_get_berr_counter = pcan_usb_get_berr_counter,
 };
-- 
2.28.0

[PATCH 23/37] can: spi: Kconfig: remove unneeded dependencies form Kconfig symbols

[Marc Kleine-Budde]

Since commits

    653ee35ce6d5 ("can: hi311x: remove custom DMA mapped buffer")
    Fixes: df58525df395 ("can: mcp251x: remove custom DMA mapped buffer")

both the hi3111x and the mcp251x driver don't make use of the DMA API
any more. So we can safely remove the HAS_DMA dependency.

While we're here, remove the unneeded CAN_DEV and SPI dependencies from
the CAN_HI311X symbol, as the parent menus already have these
dependencies.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index f780c79aac6f..a332008d8495 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -4,13 +4,11 @@ menu "CAN SPI interfaces"
 
 config CAN_HI311X
 	tristate "Holt HI311x SPI CAN controllers"
-	depends on CAN_DEV && SPI && HAS_DMA
 	help
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
 	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
-	depends on HAS_DMA
 	help
 	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
 	  controllers.
-- 
2.28.0

[PATCH 24/37] dt-bindings: can: mcp251x: change example interrupt type to IRQ_TYPE_LEVEL_LOW

[Marc Kleine-Budde]

The MCP2515 datasheet clearly describes a level-triggered interrupt pin.
Change example bindings accordingly.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index 5a0111d4de58..e689506ac38d 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -19,7 +19,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk24m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 0x2>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};
-- 
2.28.0

[PATCH 25/37] dt-bindings: can: mcp251x: document GPIO support

[Marc Kleine-Budde]

The next patch adds gpio controller support to the mcp251x driver. This
patch updates the binding accordingly.

Cc: Timo Schlüßler <schluessler@krause.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../devicetree/bindings/net/can/microchip,mcp251x.txt        | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index e689506ac38d..381f8fb3e865 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -12,6 +12,9 @@ Required properties:
 Optional properties:
  - vdd-supply: Regulator that powers the CAN controller.
  - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+                the second cell is used to specify the gpio polarity.
 
 Example:
 	can0: can@1 {
@@ -22,4 +25,6 @@ Example:
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
-- 
2.28.0

[PATCH 26/37] can: mcp251x: sort include files alphabetically

[Marc Kleine-Budde]

This patch sorts the include files alphabetically.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index d17608870f2d..df3cfe616b2d 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -32,12 +32,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/property.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/uaccess.h>
-#include <linux/regulator/consumer.h>
 
 /* SPI interface instruction set */
 #define INSTRUCTION_WRITE	0x02
-- 
2.28.0

[PATCH 27/37] can: mcp251x: add GPIO support

[Marc Kleine-Budde]

From: Timo Schlüßler <schluessler@krause.de>

The mcp251x variants feature 3 general purpose digital inputs and 2
outputs. With this patch they are accessible through the gpio framework.

Signed-off-by: Timo Schlüßler <schluessler@krause.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251x.c | 243 ++++++++++++++++++++++++++++++++++
 1 file changed, 243 insertions(+)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index df3cfe616b2d..4b113f61e39d 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -19,6 +19,7 @@
  * Copyright 2007
  */
 
+#include <linux/bitfield.h>
 #include <linux/can/core.h>
 #include <linux/can/dev.h>
 #include <linux/can/led.h>
@@ -27,6 +28,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/freezer.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -52,6 +55,30 @@
 #define INSTRUCTION_RTS(n)	(0x80 | ((n) & 0x07))
 
 /* MPC251x registers */
+#define BFPCTRL			0x0c
+#  define BFPCTRL_B0BFM		BIT(0)
+#  define BFPCTRL_B1BFM		BIT(1)
+#  define BFPCTRL_BFM(n)	(BFPCTRL_B0BFM << (n))
+#  define BFPCTRL_BFM_MASK	GENMASK(1, 0)
+#  define BFPCTRL_B0BFE		BIT(2)
+#  define BFPCTRL_B1BFE		BIT(3)
+#  define BFPCTRL_BFE(n)	(BFPCTRL_B0BFE << (n))
+#  define BFPCTRL_BFE_MASK	GENMASK(3, 2)
+#  define BFPCTRL_B0BFS		BIT(4)
+#  define BFPCTRL_B1BFS		BIT(5)
+#  define BFPCTRL_BFS(n)	(BFPCTRL_B0BFS << (n))
+#  define BFPCTRL_BFS_MASK	GENMASK(5, 4)
+#define TXRTSCTRL		0x0d
+#  define TXRTSCTRL_B0RTSM	BIT(0)
+#  define TXRTSCTRL_B1RTSM	BIT(1)
+#  define TXRTSCTRL_B2RTSM	BIT(2)
+#  define TXRTSCTRL_RTSM(n)	(TXRTSCTRL_B0RTSM << (n))
+#  define TXRTSCTRL_RTSM_MASK	GENMASK(2, 0)
+#  define TXRTSCTRL_B0RTS	BIT(3)
+#  define TXRTSCTRL_B1RTS	BIT(4)
+#  define TXRTSCTRL_B2RTS	BIT(5)
+#  define TXRTSCTRL_RTS(n)	(TXRTSCTRL_B0RTS << (n))
+#  define TXRTSCTRL_RTS_MASK	GENMASK(5, 3)
 #define CANSTAT	      0x0e
 #define CANCTRL	      0x0f
 #  define CANCTRL_REQOP_MASK	    0xe0
@@ -225,6 +252,10 @@ struct mcp251x_priv {
 	struct regulator *power;
 	struct regulator *transceiver;
 	struct clk *clk;
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip gpio;
+	u8 reg_bfpctrl;
+#endif
 };
 
 #define MCP251X_IS(_model) \
@@ -345,6 +376,213 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
 	mcp251x_spi_trans(spi, 4);
 }
 
+#ifdef CONFIG_GPIOLIB
+enum {
+	MCP251X_GPIO_TX0RTS = 0,		/* inputs */
+	MCP251X_GPIO_TX1RTS,
+	MCP251X_GPIO_TX2RTS,
+	MCP251X_GPIO_RX0BF,			/* outputs */
+	MCP251X_GPIO_RX1BF,
+};
+
+#define MCP251X_GPIO_INPUT_MASK \
+	GENMASK(MCP251X_GPIO_TX2RTS, MCP251X_GPIO_TX0RTS)
+#define MCP251X_GPIO_OUTPUT_MASK \
+	GENMASK(MCP251X_GPIO_RX1BF, MCP251X_GPIO_RX0BF)
+
+static const char * const mcp251x_gpio_names[] = {
+	[MCP251X_GPIO_TX0RTS] = "TX0RTS",	/* inputs */
+	[MCP251X_GPIO_TX1RTS] = "TX1RTS",
+	[MCP251X_GPIO_TX2RTS] = "TX2RTS",
+	[MCP251X_GPIO_RX0BF] = "RX0BF",		/* outputs */
+	[MCP251X_GPIO_RX1BF] = "RX1BF",
+};
+
+static inline bool mcp251x_gpio_is_input(unsigned int offset)
+{
+	return offset <= MCP251X_GPIO_TX2RTS;
+}
+
+static int mcp251x_gpio_request(struct gpio_chip *chip,
+				unsigned int offset)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	u8 val;
+
+	/* nothing to be done for inputs */
+	if (mcp251x_gpio_is_input(offset))
+		return 0;
+
+	val = BFPCTRL_BFE(offset - MCP251X_GPIO_RX0BF);
+
+	mutex_lock(&priv->mcp_lock);
+	mcp251x_write_bits(priv->spi, BFPCTRL, val, val);
+	mutex_unlock(&priv->mcp_lock);
+
+	priv->reg_bfpctrl |= val;
+
+	return 0;
+}
+
+static void mcp251x_gpio_free(struct gpio_chip *chip,
+			      unsigned int offset)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	u8 val;
+
+	/* nothing to be done for inputs */
+	if (mcp251x_gpio_is_input(offset))
+		return;
+
+	val = BFPCTRL_BFE(offset - MCP251X_GPIO_RX0BF);
+
+	mutex_lock(&priv->mcp_lock);
+	mcp251x_write_bits(priv->spi, BFPCTRL, val, 0);
+	mutex_unlock(&priv->mcp_lock);
+
+	priv->reg_bfpctrl &= ~val;
+}
+
+static int mcp251x_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	if (mcp251x_gpio_is_input(offset))
+		return GPIOF_DIR_IN;
+
+	return GPIOF_DIR_OUT;
+}
+
+static int mcp251x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	u8 reg, mask, val;
+
+	if (mcp251x_gpio_is_input(offset)) {
+		reg = TXRTSCTRL;
+		mask = TXRTSCTRL_RTS(offset);
+	} else {
+		reg = BFPCTRL;
+		mask = BFPCTRL_BFS(offset - MCP251X_GPIO_RX0BF);
+	}
+
+	mutex_lock(&priv->mcp_lock);
+	val = mcp251x_read_reg(priv->spi, reg);
+	mutex_unlock(&priv->mcp_lock);
+
+	return !!(val & mask);
+}
+
+static int mcp251x_gpio_get_multiple(struct gpio_chip *chip,
+				     unsigned long *maskp, unsigned long *bitsp)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	unsigned long bits = 0;
+	u8 val;
+
+	mutex_lock(&priv->mcp_lock);
+	if (maskp[0] & MCP251X_GPIO_INPUT_MASK) {
+		val = mcp251x_read_reg(priv->spi, TXRTSCTRL);
+		val = FIELD_GET(TXRTSCTRL_RTS_MASK, val);
+		bits |= FIELD_PREP(MCP251X_GPIO_INPUT_MASK, val);
+	}
+	if (maskp[0] & MCP251X_GPIO_OUTPUT_MASK) {
+		val = mcp251x_read_reg(priv->spi, BFPCTRL);
+		val = FIELD_GET(BFPCTRL_BFS_MASK, val);
+		bits |= FIELD_PREP(MCP251X_GPIO_OUTPUT_MASK, val);
+	}
+	mutex_unlock(&priv->mcp_lock);
+
+	bitsp[0] = bits;
+	return 0;
+}
+
+static void mcp251x_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	u8 mask, val;
+
+	mask = BFPCTRL_BFS(offset - MCP251X_GPIO_RX0BF);
+	val = value ? mask : 0;
+
+	mutex_lock(&priv->mcp_lock);
+	mcp251x_write_bits(priv->spi, BFPCTRL, mask, val);
+	mutex_unlock(&priv->mcp_lock);
+
+	priv->reg_bfpctrl &= ~mask;
+	priv->reg_bfpctrl |= val;
+}
+
+static void
+mcp251x_gpio_set_multiple(struct gpio_chip *chip,
+			  unsigned long *maskp, unsigned long *bitsp)
+{
+	struct mcp251x_priv *priv = gpiochip_get_data(chip);
+	u8 mask, val;
+
+	mask = FIELD_GET(MCP251X_GPIO_OUTPUT_MASK, maskp[0]);
+	mask = FIELD_PREP(BFPCTRL_BFS_MASK, mask);
+
+	val = FIELD_GET(MCP251X_GPIO_OUTPUT_MASK, bitsp[0]);
+	val = FIELD_PREP(BFPCTRL_BFS_MASK, val);
+
+	if (!mask)
+		return;
+
+	mutex_lock(&priv->mcp_lock);
+	mcp251x_write_bits(priv->spi, BFPCTRL, mask, val);
+	mutex_unlock(&priv->mcp_lock);
+
+	priv->reg_bfpctrl &= ~mask;
+	priv->reg_bfpctrl |= val;
+}
+
+static void mcp251x_gpio_restore(struct spi_device *spi)
+{
+	struct mcp251x_priv *priv = spi_get_drvdata(spi);
+
+	mcp251x_write_reg(spi, BFPCTRL, priv->reg_bfpctrl);
+}
+
+static int mcp251x_gpio_setup(struct mcp251x_priv *priv)
+{
+	struct gpio_chip *gpio = &priv->gpio;
+
+	if (!device_property_present(&priv->spi->dev, "gpio-controller"))
+		return 0;
+
+	/* gpiochip handles TX[0..2]RTS and RX[0..1]BF */
+	gpio->label = priv->spi->modalias;
+	gpio->parent = &priv->spi->dev;
+	gpio->owner = THIS_MODULE;
+	gpio->request = mcp251x_gpio_request;
+	gpio->free = mcp251x_gpio_free;
+	gpio->get_direction = mcp251x_gpio_get_direction;
+	gpio->get = mcp251x_gpio_get;
+	gpio->get_multiple = mcp251x_gpio_get_multiple;
+	gpio->set = mcp251x_gpio_set;
+	gpio->set_multiple = mcp251x_gpio_set_multiple;
+	gpio->base = -1;
+	gpio->ngpio = ARRAY_SIZE(mcp251x_gpio_names);
+	gpio->names = mcp251x_gpio_names;
+	gpio->can_sleep = true;
+#ifdef CONFIG_OF_GPIO
+	gpio->of_node = priv->spi->dev.of_node;
+#endif
+
+	return devm_gpiochip_add_data(&priv->spi->dev, gpio, priv);
+}
+#else
+static inline void mcp251x_gpio_restore(struct spi_device *spi)
+{
+}
+
+static inline int mcp251x_gpio_setup(struct mcp251x_priv *priv)
+{
+	return 0;
+}
+#endif
+
 static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 				int len, int tx_buf_idx)
 {
@@ -761,6 +999,7 @@ static void mcp251x_restart_work_handler(struct work_struct *ws)
 		if (priv->after_suspend & AFTER_SUSPEND_POWER) {
 			mcp251x_hw_reset(spi);
 			mcp251x_setup(net, spi);
+			mcp251x_gpio_restore(spi);
 		} else {
 			mcp251x_hw_wake(spi);
 		}
@@ -1136,6 +1375,10 @@ static int mcp251x_can_probe(struct spi_device *spi)
 
 	devm_can_led_init(net);
 
+	ret = mcp251x_gpio_setup(priv);
+	if (ret)
+		goto error_probe;
+
 	netdev_info(net, "MCP%x successfully initialized.\n", priv->model);
 	return 0;
 
-- 
2.28.0

[PATCH 28/37] can: mcp251x: Use readx_poll_timeout() helper

[Marc Kleine-Budde]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

We may use special helper macro to poll IO till condition or timeout occurs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251x.c | 64 ++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 31 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 4b113f61e39d..3bf57bc9b3ff 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -32,6 +32,7 @@
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
@@ -376,6 +377,15 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
 	mcp251x_spi_trans(spi, 4);
 }
 
+static u8 mcp251x_read_stat(struct spi_device *spi)
+{
+	return mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK;
+}
+
+#define mcp251x_read_stat_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+	readx_poll_timeout(mcp251x_read_stat, addr, val, cond, \
+			   delay_us, timeout_us)
+
 #ifdef CONFIG_GPIOLIB
 enum {
 	MCP251X_GPIO_TX0RTS = 0,		/* inputs */
@@ -709,7 +719,8 @@ static void mcp251x_hw_sleep(struct spi_device *spi)
 /* May only be called when device is sleeping! */
 static int mcp251x_hw_wake(struct spi_device *spi)
 {
-	unsigned long timeout;
+	u8 value;
+	int ret;
 
 	/* Force wakeup interrupt to wake device, but don't execute IST */
 	disable_irq(spi->irq);
@@ -722,14 +733,12 @@ static int mcp251x_hw_wake(struct spi_device *spi)
 	mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_CONF);
 
 	/* Wait for the device to enter config mode */
-	timeout = jiffies + HZ;
-	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
-			CANCTRL_REQOP_CONF) {
-		schedule();
-		if (time_after(jiffies, timeout)) {
-			dev_err(&spi->dev, "MCP251x didn't enter in config mode\n");
-			return -EBUSY;
-		}
+	ret = mcp251x_read_stat_poll_timeout(spi, value, value == CANCTRL_REQOP_CONF,
+					     MCP251X_OST_DELAY_MS * 1000,
+					     USEC_PER_SEC);
+	if (ret) {
+		dev_err(&spi->dev, "MCP251x didn't enter in config mode\n");
+		return ret;
 	}
 
 	/* Disable and clear pending interrupts */
@@ -784,7 +793,8 @@ static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
 static int mcp251x_set_normal_mode(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
-	unsigned long timeout;
+	u8 value;
+	int ret;
 
 	/* Enable interrupts */
 	mcp251x_write_reg(spi, CANINTE,
@@ -802,13 +812,12 @@ static int mcp251x_set_normal_mode(struct spi_device *spi)
 		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
 
 		/* Wait for the device to enter normal mode */
-		timeout = jiffies + HZ;
-		while (mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) {
-			schedule();
-			if (time_after(jiffies, timeout)) {
-				dev_err(&spi->dev, "MCP251x didn't enter in normal mode\n");
-				return -EBUSY;
-			}
+		ret = mcp251x_read_stat_poll_timeout(spi, value, value == 0,
+						     MCP251X_OST_DELAY_MS * 1000,
+						     USEC_PER_SEC);
+		if (ret) {
+			dev_err(&spi->dev, "MCP251x didn't enter in normal mode\n");
+			return ret;
 		}
 	}
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
@@ -852,7 +861,7 @@ static int mcp251x_setup(struct net_device *net, struct spi_device *spi)
 static int mcp251x_hw_reset(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
-	unsigned long timeout;
+	u8 value;
 	int ret;
 
 	/* Wait for oscillator startup timer after power up */
@@ -867,19 +876,12 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 	mdelay(MCP251X_OST_DELAY_MS);
 
 	/* Wait for reset to finish */
-	timeout = jiffies + HZ;
-	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
-	       CANCTRL_REQOP_CONF) {
-		usleep_range(MCP251X_OST_DELAY_MS * 1000,
-			     MCP251X_OST_DELAY_MS * 1000 * 2);
-
-		if (time_after(jiffies, timeout)) {
-			dev_err(&spi->dev,
-				"MCP251x didn't enter in conf mode after reset\n");
-			return -EBUSY;
-		}
-	}
-	return 0;
+	ret = mcp251x_read_stat_poll_timeout(spi, value, value == CANCTRL_REQOP_CONF,
+					     MCP251X_OST_DELAY_MS * 1000,
+					     USEC_PER_SEC);
+	if (ret)
+		dev_err(&spi->dev, "MCP251x didn't enter in conf mode after reset\n");
+	return ret;
 }
 
 static int mcp251x_hw_probe(struct spi_device *spi)
-- 
2.28.0

[PATCH 29/37] can: mcp251x: add support for half duplex controllers

[Marc Kleine-Budde]

From: Tim Harvey <tharvey@gateworks.com>

Some SPI host controllers do not support full-duplex SPI and are
marked as such via the SPI_CONTROLLER_HALF_DUPLEX controller flag.

For such controllers use half duplex transactions but retain full
duplex transactions for the controllers that can handle those.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://lore.kernel.org/r/1595516275-1179-1-git-send-email-tharvey@gateworks.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251x.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 3bf57bc9b3ff..22d814ae4edc 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -322,8 +322,12 @@ static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg)
 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
 	priv->spi_tx_buf[1] = reg;
 
-	mcp251x_spi_trans(spi, 3);
-	val = priv->spi_rx_buf[2];
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+		spi_write_then_read(spi, priv->spi_tx_buf, 2, &val, 1);
+	} else {
+		mcp251x_spi_trans(spi, 3);
+		val = priv->spi_rx_buf[2];
+	}
 
 	return val;
 }
@@ -335,10 +339,18 @@ static void mcp251x_read_2regs(struct spi_device *spi, u8 reg, u8 *v1, u8 *v2)
 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
 	priv->spi_tx_buf[1] = reg;
 
-	mcp251x_spi_trans(spi, 4);
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+		u8 val[2] = { 0 };
 
-	*v1 = priv->spi_rx_buf[2];
-	*v2 = priv->spi_rx_buf[3];
+		spi_write_then_read(spi, priv->spi_tx_buf, 2, val, 2);
+		*v1 = val[0];
+		*v2 = val[1];
+	} else {
+		mcp251x_spi_trans(spi, 4);
+
+		*v1 = priv->spi_rx_buf[2];
+		*v2 = priv->spi_rx_buf[3];
+	}
 }
 
 static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
@@ -657,8 +669,16 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
 			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
 	} else {
 		priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
-		mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
-		memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+		if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+			spi_write_then_read(spi, priv->spi_tx_buf, 1,
+					    priv->spi_rx_buf,
+					    SPI_TRANSFER_BUF_LEN);
+			memcpy(buf + 1, priv->spi_rx_buf,
+			       SPI_TRANSFER_BUF_LEN - 1);
+		} else {
+			mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
+			memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+		}
 	}
 }
 
-- 
2.28.0

[PATCH 30/37] can: mscan: mpc5xxx_can: update contact email

[Marc Kleine-Budde]

From: Wolfram Sang <wsa@kernel.org>

The 'pengutronix' address is defunct for years. Use the proper contact
address.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200502142657.19199-1-wsa@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mscan/mpc5xxx_can.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index e4f4b5c9ebd6..e254e04ae257 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
  *                         Varma Electronics Oy
  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
- * Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix <kernel@pengutronix.de>
  */
 
 #include <linux/kernel.h>
-- 
2.28.0

[PATCH 31/37] can: mscan: simplify clock enable/disable

[Marc Kleine-Budde]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

All the NULL checks are pointless, clk_*() routines already deal with
NULL just fine.

Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594972875-27631-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mscan/mscan.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 0b3532dd50e2..640ba1b356ec 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -541,16 +541,12 @@ static int mscan_open(struct net_device *dev)
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs __iomem *regs = priv->reg_base;
 
-	if (priv->clk_ipg) {
-		ret = clk_prepare_enable(priv->clk_ipg);
-		if (ret)
-			goto exit_retcode;
-	}
-	if (priv->clk_can) {
-		ret = clk_prepare_enable(priv->clk_can);
-		if (ret)
-			goto exit_dis_ipg_clock;
-	}
+	ret = clk_prepare_enable(priv->clk_ipg);
+	if (ret)
+		goto exit_retcode;
+	ret = clk_prepare_enable(priv->clk_can);
+	if (ret)
+		goto exit_dis_ipg_clock;
 
 	/* common open */
 	ret = open_candev(dev);
@@ -584,11 +580,9 @@ static int mscan_open(struct net_device *dev)
 	napi_disable(&priv->napi);
 	close_candev(dev);
 exit_dis_can_clock:
-	if (priv->clk_can)
-		clk_disable_unprepare(priv->clk_can);
+	clk_disable_unprepare(priv->clk_can);
 exit_dis_ipg_clock:
-	if (priv->clk_ipg)
-		clk_disable_unprepare(priv->clk_ipg);
+	clk_disable_unprepare(priv->clk_ipg);
 exit_retcode:
 	return ret;
 }
@@ -607,10 +601,8 @@ static int mscan_close(struct net_device *dev)
 	close_candev(dev);
 	free_irq(dev->irq, dev);
 
-	if (priv->clk_can)
-		clk_disable_unprepare(priv->clk_can);
-	if (priv->clk_ipg)
-		clk_disable_unprepare(priv->clk_ipg);
+	clk_disable_unprepare(priv->clk_can);
+	clk_disable_unprepare(priv->clk_ipg);
 
 	return 0;
 }
-- 
2.28.0

[PATCH 32/37] can: rx-offload: can_rx_offload_add_manual(): add new initialization function

[Marc Kleine-Budde]

This patch adds a new initialization function:
can_rx_offload_add_manual()

It should be used to add support rx-offload to a driver, if the callback
mechanism should not be used. Use e.g. can_rx_offload_queue_sorted() to queue
skbs into rx-offload.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/rx-offload.c   | 11 +++++++++++
 include/linux/can/rx-offload.h |  3 +++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/can/rx-offload.c b/drivers/net/can/rx-offload.c
index e8328910a234..3b180269a92d 100644
--- a/drivers/net/can/rx-offload.c
+++ b/drivers/net/can/rx-offload.c
@@ -351,6 +351,17 @@ int can_rx_offload_add_fifo(struct net_device *dev,
 }
 EXPORT_SYMBOL_GPL(can_rx_offload_add_fifo);
 
+int can_rx_offload_add_manual(struct net_device *dev,
+			      struct can_rx_offload *offload,
+			      unsigned int weight)
+{
+	if (offload->mailbox_read)
+		return -EINVAL;
+
+	return can_rx_offload_init_queue(dev, offload, weight);
+}
+EXPORT_SYMBOL_GPL(can_rx_offload_add_manual);
+
 void can_rx_offload_enable(struct can_rx_offload *offload)
 {
 	napi_enable(&offload->napi);
diff --git a/include/linux/can/rx-offload.h b/include/linux/can/rx-offload.h
index 1b78a0cfb615..f1b38088b765 100644
--- a/include/linux/can/rx-offload.h
+++ b/include/linux/can/rx-offload.h
@@ -35,6 +35,9 @@ int can_rx_offload_add_timestamp(struct net_device *dev,
 int can_rx_offload_add_fifo(struct net_device *dev,
 			    struct can_rx_offload *offload,
 			    unsigned int weight);
+int can_rx_offload_add_manual(struct net_device *dev,
+			      struct can_rx_offload *offload,
+			      unsigned int weight);
 int can_rx_offload_irq_offload_timestamp(struct can_rx_offload *offload,
 					 u64 reg);
 int can_rx_offload_irq_offload_fifo(struct can_rx_offload *offload);
-- 
2.28.0

[PATCH 33/37] dt-binding: can: mcp25xxfd: document device tree bindings

[Marc Kleine-Budde]

From: Oleksij Rempel <o.rempel@pengutronix.de>

This patch adds the device-tree binding documentation for the Microchip
MCP25xxFD SPI CAN controller family.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../bindings/net/can/microchip,mcp25xxfd.yaml | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml
new file mode 100644
index 000000000000..aa2cad14d6d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
+  bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp2517fd
+        description: for MCP2517FD
+      - const: microchip,mcp2518fd
+        description: for MCP2518FD
+      - const: microchip,mcp25xxfd
+        description: to autodetect chip variant
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+    maxItems: 1
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+    maxItems: 1
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp25xxfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };
-- 
2.28.0

[PATCH 34/37] can: mcp25xxfd: add regmap infrastructure

[Marc Kleine-Budde]

This patch adds the regmap infrastructure for the Microchip MCP25xxFD SPI CAN
controller family. The actual driver is added in the next commit.

Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/Kconfig                   |   2 +
 drivers/net/can/spi/Makefile                  |   1 +
 drivers/net/can/spi/mcp25xxfd/Kconfig         |  17 +
 drivers/net/can/spi/mcp25xxfd/Makefile        |   7 +
 .../net/can/spi/mcp25xxfd/mcp25xxfd-crc16.c   |  89 ++
 .../net/can/spi/mcp25xxfd/mcp25xxfd-regmap.c  | 556 ++++++++++++
 drivers/net/can/spi/mcp25xxfd/mcp25xxfd.h     | 833 ++++++++++++++++++
 7 files changed, 1505 insertions(+)
 create mode 100644 drivers/net/can/spi/mcp25xxfd/Kconfig
 create mode 100644 drivers/net/can/spi/mcp25xxfd/Makefile
 create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd-crc16.c
 create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd-regmap.c
 create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd.h

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index a332008d8495..a82240628c33 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -13,4 +13,6 @@ config CAN_MCP251X
 	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
 	  controllers.
 
+source "drivers/net/can/spi/mcp25xxfd/Kconfig"
+
 endmenu
diff --git a/drivers/net/can/spi/Makefile b/drivers/net/can/spi/Makefile
index f115b2c46623..20c18ac96b1c 100644
--- a/drivers/net/can/spi/Makefile
+++ b/drivers/net/can/spi/Makefile
@@ -6,3 +6,4 @@
 
 obj-$(CONFIG_CAN_HI311X)	+= hi311x.o
 obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
+obj-y				+= mcp25xxfd/
diff --git a/drivers/net/can/spi/mcp25xxfd/Kconfig b/drivers/net/can/spi/mcp25xxfd/Kconfig
new file mode 100644
index 000000000000..9eb596019a58
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CAN_MCP25XXFD
+	tristate "Microchip MCP25xxFD SPI CAN controllers"
+	select REGMAP
+	help
+	  Driver for the Microchip MCP25XXFD SPI FD-CAN controller
+	  family.
+
+config CAN_MCP25XXFD_SANITY
+	depends on CAN_MCP25XXFD
+	bool "Additional Sanity Checks"
+	help
+	  This option enables additional sanity checks in the driver,
+	  that compares various internal counters with the in chip
+	  variants. This comes with a runtime overhead.
+	  Disable if unsure.
diff --git a/drivers/net/can/spi/mcp25xxfd/Makefile b/drivers/net/can/spi/mcp25xxfd/Makefile
new file mode 100644
index 000000000000..9dadf0070b42
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CAN_MCP25XXFD) += mcp25xxfd.o
+
+mcp25xxfd-objs :=
+mcp25xxfd-objs += mcp25xxfd-crc16.o
+mcp25xxfd-objs += mcp25xxfd-regmap.o
diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-crc16.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-crc16.c
new file mode 100644
index 000000000000..79d09aaebf33
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-crc16.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp25xxfd - Microchip MCP25xxFD Family CAN controller driver
+//
+// Copyright (c) 2020 Pengutronix,
+//                    Marc Kleine-Budde <kernel@pengutronix.de>
+//
+// Based on:
+//
+// CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface
+//
+// Copyright (c) 2019 Martin Sperl <kernel@martin.sperl.org>
+//
+
+#include "mcp25xxfd.h"
+
+/* The standard crc16 in linux/crc16.h is unfortunately not computing
+ * the correct results (left shift vs. right shift). So here an
+ * implementation with a table generated with the help of:
+ *
+ * http://lkml.iu.edu/hypermail/linux/kernel/0508.1/1085.html
+ */
+static const u16 mcp25xxfd_crc16_table[] = {
+	0x0000, 0x8005, 0x800f, 0x000a, 0x801b, 0x001e, 0x0014, 0x8011,
+	0x8033, 0x0036, 0x003c, 0x8039, 0x0028, 0x802d, 0x8027, 0x0022,
+	0x8063, 0x0066, 0x006c, 0x8069, 0x0078, 0x807d, 0x8077, 0x0072,
+	0x0050, 0x8055, 0x805f, 0x005a, 0x804b, 0x004e, 0x0044, 0x8041,
+	0x80c3, 0x00c6, 0x00cc, 0x80c9, 0x00d8, 0x80dd, 0x80d7, 0x00d2,
+	0x00f0, 0x80f5, 0x80ff, 0x00fa, 0x80eb, 0x00ee, 0x00e4, 0x80e1,
+	0x00a0, 0x80a5, 0x80af, 0x00aa, 0x80bb, 0x00be, 0x00b4, 0x80b1,
+	0x8093, 0x0096, 0x009c, 0x8099, 0x0088, 0x808d, 0x8087, 0x0082,
+	0x8183, 0x0186, 0x018c, 0x8189, 0x0198, 0x819d, 0x8197, 0x0192,
+	0x01b0, 0x81b5, 0x81bf, 0x01ba, 0x81ab, 0x01ae, 0x01a4, 0x81a1,
+	0x01e0, 0x81e5, 0x81ef, 0x01ea, 0x81fb, 0x01fe, 0x01f4, 0x81f1,
+	0x81d3, 0x01d6, 0x01dc, 0x81d9, 0x01c8, 0x81cd, 0x81c7, 0x01c2,
+	0x0140, 0x8145, 0x814f, 0x014a, 0x815b, 0x015e, 0x0154, 0x8151,
+	0x8173, 0x0176, 0x017c, 0x8179, 0x0168, 0x816d, 0x8167, 0x0162,
+	0x8123, 0x0126, 0x012c, 0x8129, 0x0138, 0x813d, 0x8137, 0x0132,
+	0x0110, 0x8115, 0x811f, 0x011a, 0x810b, 0x010e, 0x0104, 0x8101,
+	0x8303, 0x0306, 0x030c, 0x8309, 0x0318, 0x831d, 0x8317, 0x0312,
+	0x0330, 0x8335, 0x833f, 0x033a, 0x832b, 0x032e, 0x0324, 0x8321,
+	0x0360, 0x8365, 0x836f, 0x036a, 0x837b, 0x037e, 0x0374, 0x8371,
+	0x8353, 0x0356, 0x035c, 0x8359, 0x0348, 0x834d, 0x8347, 0x0342,
+	0x03c0, 0x83c5, 0x83cf, 0x03ca, 0x83db, 0x03de, 0x03d4, 0x83d1,
+	0x83f3, 0x03f6, 0x03fc, 0x83f9, 0x03e8, 0x83ed, 0x83e7, 0x03e2,
+	0x83a3, 0x03a6, 0x03ac, 0x83a9, 0x03b8, 0x83bd, 0x83b7, 0x03b2,
+	0x0390, 0x8395, 0x839f, 0x039a, 0x838b, 0x038e, 0x0384, 0x8381,
+	0x0280, 0x8285, 0x828f, 0x028a, 0x829b, 0x029e, 0x0294, 0x8291,
+	0x82b3, 0x02b6, 0x02bc, 0x82b9, 0x02a8, 0x82ad, 0x82a7, 0x02a2,
+	0x82e3, 0x02e6, 0x02ec, 0x82e9, 0x02f8, 0x82fd, 0x82f7, 0x02f2,
+	0x02d0, 0x82d5, 0x82df, 0x02da, 0x82cb, 0x02ce, 0x02c4, 0x82c1,
+	0x8243, 0x0246, 0x024c, 0x8249, 0x0258, 0x825d, 0x8257, 0x0252,
+	0x0270, 0x8275, 0x827f, 0x027a, 0x826b, 0x026e, 0x0264, 0x8261,
+	0x0220, 0x8225, 0x822f, 0x022a, 0x823b, 0x023e, 0x0234, 0x8231,
+	0x8213, 0x0216, 0x021c, 0x8219, 0x0208, 0x820d, 0x8207, 0x0202
+};
+
+static inline u16 mcp25xxfd_crc16_byte(u16 crc, const u8 data)
+{
+	u8 index = (crc >> 8) ^ data;
+
+	return (crc << 8) ^ mcp25xxfd_crc16_table[index];
+}
+
+static u16 mcp25xxfd_crc16(u16 crc, u8 const *buffer, size_t len)
+{
+	while (len--)
+		crc = mcp25xxfd_crc16_byte(crc, *buffer++);
+
+	return crc;
+}
+
+u16 mcp25xxfd_crc16_compute(const void *data, size_t data_size)
+{
+	u16 crc = 0xffff;
+
+	return mcp25xxfd_crc16(crc, data, data_size);
+}
+
+u16 mcp25xxfd_crc16_compute2(const void *cmd, size_t cmd_size,
+			     const void *data, size_t data_size)
+{
+	u16 crc;
+
+	crc = mcp25xxfd_crc16_compute(cmd, cmd_size);
+	crc = mcp25xxfd_crc16(crc, data, data_size);
+
+	return crc;
+}
diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-regmap.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-regmap.c
new file mode 100644
index 000000000000..f02c65cc95ba
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-regmap.c
@@ -0,0 +1,556 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp25xxfd - Microchip MCP25xxFD Family CAN controller driver
+//
+// Copyright (c) 2019, 2020 Pengutronix,
+//                          Marc Kleine-Budde <kernel@pengutronix.de>
+//
+
+#include "mcp25xxfd.h"
+
+#include <asm/unaligned.h>
+
+static const struct regmap_config mcp25xxfd_regmap_crc;
+
+static int
+mcp25xxfd_regmap_nocrc_write(void *context, const void *data, size_t count)
+{
+	struct spi_device *spi = context;
+
+	return spi_write(spi, data, count);
+}
+
+static int
+mcp25xxfd_regmap_nocrc_gather_write(void *context,
+				    const void *reg, size_t reg_len,
+				    const void *val, size_t val_len)
+{
+	struct spi_device *spi = context;
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct mcp25xxfd_map_buf_nocrc *buf_tx = priv->map_buf_nocrc_tx;
+	struct spi_transfer xfer[] = {
+		{
+			.tx_buf = buf_tx,
+			.len = sizeof(buf_tx->cmd) + val_len,
+		},
+	};
+
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16));
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    reg_len != sizeof(buf_tx->cmd.cmd))
+		return -EINVAL;
+
+	memcpy(&buf_tx->cmd, reg, sizeof(buf_tx->cmd));
+	memcpy(buf_tx->data, val, val_len);
+
+	return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static inline bool mcp25xxfd_update_bits_read_reg(unsigned int reg)
+{
+	switch (reg) {
+	case MCP25XXFD_REG_INT:
+	case MCP25XXFD_REG_TEFCON:
+	case MCP25XXFD_REG_FIFOCON(MCP25XXFD_RX_FIFO(0)):
+	case MCP25XXFD_REG_FLTCON(0):
+	case MCP25XXFD_REG_ECCSTAT:
+	case MCP25XXFD_REG_CRC:
+		return false;
+	case MCP25XXFD_REG_CON:
+	case MCP25XXFD_REG_FIFOSTA(MCP25XXFD_RX_FIFO(0)):
+	case MCP25XXFD_REG_OSC:
+	case MCP25XXFD_REG_ECCCON:
+		return true;
+	default:
+		WARN(1, "Status of reg 0x%04x unknown.\n", reg);
+	}
+
+	return true;
+}
+
+static int
+mcp25xxfd_regmap_nocrc_update_bits(void *context, unsigned int reg,
+				   unsigned int mask, unsigned int val)
+{
+	struct spi_device *spi = context;
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct mcp25xxfd_map_buf_nocrc *buf_rx = priv->map_buf_nocrc_rx;
+	struct mcp25xxfd_map_buf_nocrc *buf_tx = priv->map_buf_nocrc_tx;
+	__le32 orig_le32 = 0, mask_le32, val_le32, tmp_le32;
+	u8 first_byte, last_byte, len;
+	int err;
+
+	BUILD_BUG_ON(sizeof(buf_rx->cmd) != sizeof(__be16));
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16));
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    mask == 0)
+		return -EINVAL;
+
+	first_byte = mcp25xxfd_first_byte_set(mask);
+	last_byte = mcp25xxfd_last_byte_set(mask);
+	len = last_byte - first_byte + 1;
+
+	if (mcp25xxfd_update_bits_read_reg(reg)) {
+		struct spi_transfer xfer[2] = { };
+		struct spi_message msg;
+
+		spi_message_init(&msg);
+		spi_message_add_tail(&xfer[0], &msg);
+
+		if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_HALF_DUPLEX) {
+			xfer[0].tx_buf = buf_tx;
+			xfer[0].len = sizeof(buf_tx->cmd);
+
+			xfer[1].rx_buf = buf_rx->data;
+			xfer[1].len = len;
+			spi_message_add_tail(&xfer[1], &msg);
+		} else {
+			xfer[0].tx_buf = buf_tx;
+			xfer[0].rx_buf = buf_rx;
+			xfer[0].len = sizeof(buf_tx->cmd) + len;
+
+			if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY))
+				memset(buf_tx->data, 0x0, len);
+		}
+
+		mcp25xxfd_spi_cmd_read_nocrc(&buf_tx->cmd, reg + first_byte);
+		err = spi_sync(spi, &msg);
+		if (err)
+			return err;
+
+		memcpy(&orig_le32, buf_rx->data, len);
+	}
+
+	mask_le32 = cpu_to_le32(mask >> BITS_PER_BYTE * first_byte);
+	val_le32 = cpu_to_le32(val >> BITS_PER_BYTE * first_byte);
+
+	tmp_le32 = orig_le32 & ~mask_le32;
+	tmp_le32 |= val_le32 & mask_le32;
+
+	mcp25xxfd_spi_cmd_write_nocrc(&buf_tx->cmd, reg + first_byte);
+	memcpy(buf_tx->data, &tmp_le32, len);
+
+	return spi_write(spi, buf_tx, sizeof(buf_tx->cmd) + len);
+}
+
+static int
+mcp25xxfd_regmap_nocrc_read(void *context,
+			    const void *reg, size_t reg_len,
+			    void *val_buf, size_t val_len)
+{
+	struct spi_device *spi = context;
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct mcp25xxfd_map_buf_nocrc *buf_rx = priv->map_buf_nocrc_rx;
+	struct mcp25xxfd_map_buf_nocrc *buf_tx = priv->map_buf_nocrc_tx;
+	struct spi_transfer xfer[2] = { };
+	struct spi_message msg;
+	int err;
+
+	BUILD_BUG_ON(sizeof(buf_rx->cmd) != sizeof(__be16));
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16));
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    reg_len != sizeof(buf_tx->cmd.cmd))
+		return -EINVAL;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer[0], &msg);
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_HALF_DUPLEX) {
+		xfer[0].tx_buf = reg;
+		xfer[0].len = sizeof(buf_tx->cmd);
+
+		xfer[1].rx_buf = val_buf;
+		xfer[1].len = val_len;
+		spi_message_add_tail(&xfer[1], &msg);
+	} else {
+		xfer[0].tx_buf = buf_tx;
+		xfer[0].rx_buf = buf_rx;
+		xfer[0].len = sizeof(buf_tx->cmd) + val_len;
+
+		memcpy(&buf_tx->cmd, reg, sizeof(buf_tx->cmd));
+		if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY))
+			memset(buf_tx->data, 0x0, val_len);
+	};
+
+	err = spi_sync(spi, &msg);
+	if (err)
+		return err;
+
+	if (!(priv->devtype_data.quirks & MCP25XXFD_QUIRK_HALF_DUPLEX))
+		memcpy(val_buf, buf_rx->data, val_len);
+
+	return 0;
+}
+
+static int
+mcp25xxfd_regmap_crc_gather_write(void *context,
+				  const void *reg_p, size_t reg_len,
+				  const void *val, size_t val_len)
+{
+	struct spi_device *spi = context;
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct mcp25xxfd_map_buf_crc *buf_tx = priv->map_buf_crc_tx;
+	struct spi_transfer xfer[] = {
+		{
+			.tx_buf = buf_tx,
+			.len = sizeof(buf_tx->cmd) + val_len +
+				sizeof(buf_tx->crc),
+		},
+	};
+	u16 reg = *(u16 *)reg_p;
+	u16 crc;
+
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16) + sizeof(u8));
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    reg_len != sizeof(buf_tx->cmd.cmd) +
+	    mcp25xxfd_regmap_crc.pad_bits / BITS_PER_BYTE)
+		return -EINVAL;
+
+	mcp25xxfd_spi_cmd_write_crc(&buf_tx->cmd, reg, val_len);
+	memcpy(buf_tx->data, val, val_len);
+
+	crc = mcp25xxfd_crc16_compute(buf_tx, sizeof(buf_tx->cmd) + val_len);
+	put_unaligned_be16(crc, buf_tx->data + val_len);
+
+	return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static int
+mcp25xxfd_regmap_crc_write(void *context,
+			   const void *data, size_t count)
+{
+	const size_t data_offset = sizeof(__be16) +
+		mcp25xxfd_regmap_crc.pad_bits / BITS_PER_BYTE;
+
+	return mcp25xxfd_regmap_crc_gather_write(context,
+						 data, data_offset,
+						 data + data_offset,
+						 count - data_offset);
+}
+
+static int
+mcp25xxfd_regmap_crc_read_one(struct mcp25xxfd_priv *priv,
+			      struct spi_message *msg, unsigned int data_len)
+{
+	const struct mcp25xxfd_map_buf_crc *buf_rx = priv->map_buf_crc_rx;
+	const struct mcp25xxfd_map_buf_crc *buf_tx = priv->map_buf_crc_tx;
+	u16 crc_received, crc_calculated;
+	int err;
+
+	BUILD_BUG_ON(sizeof(buf_rx->cmd) != sizeof(__be16) + sizeof(u8));
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16) + sizeof(u8));
+
+	err = spi_sync(priv->spi, msg);
+	if (err)
+		return err;
+
+	crc_received = get_unaligned_be16(buf_rx->data + data_len);
+	crc_calculated = mcp25xxfd_crc16_compute2(&buf_tx->cmd,
+						  sizeof(buf_tx->cmd),
+						  buf_rx->data,
+						  data_len);
+	if (crc_received != crc_calculated)
+		return -EBADMSG;
+
+	return 0;
+}
+
+static int
+mcp25xxfd_regmap_crc_read(void *context,
+			  const void *reg_p, size_t reg_len,
+			  void *val_buf, size_t val_len)
+{
+	struct spi_device *spi = context;
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct mcp25xxfd_map_buf_crc *buf_rx = priv->map_buf_crc_rx;
+	struct mcp25xxfd_map_buf_crc *buf_tx = priv->map_buf_crc_tx;
+	struct spi_transfer xfer[2] = { };
+	struct spi_message msg;
+	u16 reg = *(u16 *)reg_p;
+	int i, err;
+
+	BUILD_BUG_ON(sizeof(buf_rx->cmd) != sizeof(__be16) + sizeof(u8));
+	BUILD_BUG_ON(sizeof(buf_tx->cmd) != sizeof(__be16) + sizeof(u8));
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    reg_len != sizeof(buf_tx->cmd.cmd) +
+	    mcp25xxfd_regmap_crc.pad_bits / BITS_PER_BYTE)
+		return -EINVAL;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer[0], &msg);
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_HALF_DUPLEX) {
+		xfer[0].tx_buf = buf_tx;
+		xfer[0].len = sizeof(buf_tx->cmd);
+
+		xfer[1].rx_buf = buf_rx->data;
+		xfer[1].len = val_len + sizeof(buf_tx->crc);
+		spi_message_add_tail(&xfer[1], &msg);
+	} else {
+		xfer[0].tx_buf = buf_tx;
+		xfer[0].rx_buf = buf_rx;
+		xfer[0].len = sizeof(buf_tx->cmd) + val_len +
+			sizeof(buf_tx->crc);
+
+		if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY))
+			memset(buf_tx->data, 0x0, val_len +
+			       sizeof(buf_tx->crc));
+	}
+
+	mcp25xxfd_spi_cmd_read_crc(&buf_tx->cmd, reg, val_len);
+
+	for (i = 0; i < MCP25XXFD_READ_CRC_RETRIES_MAX; i++) {
+		err = mcp25xxfd_regmap_crc_read_one(priv, &msg, val_len);
+		if (!err)
+			goto out;
+		if (err != -EBADMSG)
+			return err;
+
+		/* MCP25XXFD_REG_OSC is the first ever reg we read from.
+		 *
+		 * The chip may be in deep sleep and this SPI transfer
+		 * (i.e. the assertion of the CS) will wake the chip
+		 * up. This takes about 3ms. The CRC of this transfer
+		 * is wrong.
+		 *
+		 * Or there isn't a chip at all, in this case the CRC
+		 * will be wrong, too.
+		 *
+		 * In both cases ignore the CRC and copy the read data
+		 * to the caller. It will take care of both cases.
+		 *
+		 */
+		if (reg == MCP25XXFD_REG_OSC) {
+			err = 0;
+			goto out;
+		}
+
+		netdev_dbg(priv->ndev,
+			   "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n",
+			   reg, val_len, (int)val_len, buf_rx->data,
+			   get_unaligned_be16(buf_rx->data + val_len));
+	}
+
+	if (err) {
+		netdev_info(priv->ndev,
+			    "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n",
+			    reg, val_len, (int)val_len, buf_rx->data,
+			    get_unaligned_be16(buf_rx->data + val_len));
+
+		return err;
+	}
+ out:
+	memcpy(val_buf, buf_rx->data, val_len);
+
+	return 0;
+}
+
+static const struct regmap_range mcp25xxfd_reg_table_yes_range[] = {
+	regmap_reg_range(0x000, 0x2ec),	/* CAN FD Controller Module SFR */
+	regmap_reg_range(0x400, 0xbfc),	/* RAM */
+	regmap_reg_range(0xe00, 0xe14),	/* MCP2517/18FD SFR */
+};
+
+static const struct regmap_access_table mcp25xxfd_reg_table = {
+	.yes_ranges = mcp25xxfd_reg_table_yes_range,
+	.n_yes_ranges = ARRAY_SIZE(mcp25xxfd_reg_table_yes_range),
+};
+
+static const struct regmap_config mcp25xxfd_regmap_nocrc = {
+	.name = "nocrc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.pad_bits = 0,
+	.val_bits = 32,
+	.max_register = 0xffc,
+	.wr_table = &mcp25xxfd_reg_table,
+	.rd_table = &mcp25xxfd_reg_table,
+	.cache_type = REGCACHE_NONE,
+	.read_flag_mask = (__force unsigned long)
+		cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_READ),
+	.write_flag_mask = (__force unsigned long)
+		cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_WRITE),
+};
+
+static const struct regmap_bus mcp25xxfd_bus_nocrc = {
+	.write = mcp25xxfd_regmap_nocrc_write,
+	.gather_write = mcp25xxfd_regmap_nocrc_gather_write,
+	.reg_update_bits = mcp25xxfd_regmap_nocrc_update_bits,
+	.read = mcp25xxfd_regmap_nocrc_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+	.max_raw_read = sizeof_field(struct mcp25xxfd_map_buf_nocrc, data),
+	.max_raw_write = sizeof_field(struct mcp25xxfd_map_buf_nocrc, data),
+};
+
+static const struct regmap_config mcp25xxfd_regmap_crc = {
+	.name = "crc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.pad_bits = 16,		/* keep data bits aligned */
+	.val_bits = 32,
+	.max_register = 0xffc,
+	.wr_table = &mcp25xxfd_reg_table,
+	.rd_table = &mcp25xxfd_reg_table,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_bus mcp25xxfd_bus_crc = {
+	.write = mcp25xxfd_regmap_crc_write,
+	.gather_write = mcp25xxfd_regmap_crc_gather_write,
+	.read = mcp25xxfd_regmap_crc_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+	.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+	.max_raw_read = sizeof_field(struct mcp25xxfd_map_buf_crc, data),
+	.max_raw_write = sizeof_field(struct mcp25xxfd_map_buf_crc, data),
+};
+
+static inline bool
+mcp25xxfd_regmap_use_nocrc(struct mcp25xxfd_priv *priv)
+{
+	return (!(priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG)) ||
+		(!(priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_RX));
+}
+
+static inline bool
+mcp25xxfd_regmap_use_crc(struct mcp25xxfd_priv *priv)
+{
+	return (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG) ||
+		(priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_RX);
+}
+
+static int
+mcp25xxfd_regmap_init_nocrc(struct mcp25xxfd_priv *priv)
+{
+	if (!priv->map_nocrc) {
+		struct regmap *map;
+
+		map = devm_regmap_init(&priv->spi->dev, &mcp25xxfd_bus_nocrc,
+				       priv->spi, &mcp25xxfd_regmap_nocrc);
+		if (IS_ERR(map))
+			return PTR_ERR(map);
+
+		priv->map_nocrc = map;
+	}
+
+	if (!priv->map_buf_nocrc_rx) {
+		priv->map_buf_nocrc_rx =
+			devm_kzalloc(&priv->spi->dev,
+				     sizeof(*priv->map_buf_nocrc_rx),
+				     GFP_KERNEL);
+		if (!priv->map_buf_nocrc_rx)
+			return -ENOMEM;
+	}
+
+	if (!priv->map_buf_nocrc_tx) {
+		priv->map_buf_nocrc_tx =
+			devm_kzalloc(&priv->spi->dev,
+				     sizeof(*priv->map_buf_nocrc_tx),
+				     GFP_KERNEL);
+		if (!priv->map_buf_nocrc_tx)
+			return -ENOMEM;
+	}
+
+	if (!(priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG))
+		priv->map_reg = priv->map_nocrc;
+
+	if (!(priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_RX))
+		priv->map_rx = priv->map_nocrc;
+
+	return 0;
+}
+
+static void mcp25xxfd_regmap_destroy_nocrc(struct mcp25xxfd_priv *priv)
+{
+	if (priv->map_buf_nocrc_rx) {
+		devm_kfree(&priv->spi->dev, priv->map_buf_nocrc_rx);
+		priv->map_buf_nocrc_rx = NULL;
+	}
+	if (priv->map_buf_nocrc_tx) {
+		devm_kfree(&priv->spi->dev, priv->map_buf_nocrc_tx);
+		priv->map_buf_nocrc_tx = NULL;
+	}
+}
+
+static int
+mcp25xxfd_regmap_init_crc(struct mcp25xxfd_priv *priv)
+{
+	if (!priv->map_crc) {
+		struct regmap *map;
+
+		map = devm_regmap_init(&priv->spi->dev, &mcp25xxfd_bus_crc,
+				       priv->spi, &mcp25xxfd_regmap_crc);
+		if (IS_ERR(map))
+			return PTR_ERR(map);
+
+		priv->map_crc = map;
+	}
+
+	if (!priv->map_buf_crc_rx) {
+		priv->map_buf_crc_rx =
+			devm_kzalloc(&priv->spi->dev,
+				     sizeof(*priv->map_buf_crc_rx),
+				     GFP_KERNEL);
+		if (!priv->map_buf_crc_rx)
+			return -ENOMEM;
+	}
+
+	if (!priv->map_buf_crc_tx) {
+		priv->map_buf_crc_tx =
+			devm_kzalloc(&priv->spi->dev,
+				     sizeof(*priv->map_buf_crc_tx),
+				     GFP_KERNEL);
+		if (!priv->map_buf_crc_tx)
+			return -ENOMEM;
+	}
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG)
+		priv->map_reg = priv->map_crc;
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_RX)
+		priv->map_rx = priv->map_crc;
+
+	return 0;
+}
+
+static void mcp25xxfd_regmap_destroy_crc(struct mcp25xxfd_priv *priv)
+{
+	if (priv->map_buf_crc_rx) {
+		devm_kfree(&priv->spi->dev, priv->map_buf_crc_rx);
+		priv->map_buf_crc_rx = NULL;
+	}
+	if (priv->map_buf_crc_tx) {
+		devm_kfree(&priv->spi->dev, priv->map_buf_crc_tx);
+		priv->map_buf_crc_tx = NULL;
+	}
+}
+
+int mcp25xxfd_regmap_init(struct mcp25xxfd_priv *priv)
+{
+	int err;
+
+	if (mcp25xxfd_regmap_use_nocrc(priv)) {
+		err = mcp25xxfd_regmap_init_nocrc(priv);
+
+		if (err)
+			return err;
+	} else {
+		mcp25xxfd_regmap_destroy_nocrc(priv);
+	}
+
+	if (mcp25xxfd_regmap_use_crc(priv)) {
+		err = mcp25xxfd_regmap_init_crc(priv);
+
+		if (err)
+			return err;
+	} else {
+		mcp25xxfd_regmap_destroy_crc(priv);
+	}
+
+	return 0;
+}
diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd.h
new file mode 100644
index 000000000000..896d5a261260
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd.h
@@ -0,0 +1,833 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * mcp25xxfd - Microchip MCP25xxFD Family CAN controller driver
+ *
+ * Copyright (c) 2019 Pengutronix,
+ *                    Marc Kleine-Budde <kernel@pengutronix.de>
+ * Copyright (c) 2019 Martin Sperl <kernel@martin.sperl.org>
+ */
+
+#ifndef _MCP25XXFD_H
+#define _MCP25XXFD_H
+
+#include <linux/can/core.h>
+#include <linux/can/dev.h>
+#include <linux/can/rx-offload.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+/* MPC25xx registers */
+
+/* CAN FD Controller Module SFR */
+#define MCP25XXFD_REG_CON 0x00
+#define MCP25XXFD_REG_CON_TXBWS_MASK GENMASK(31, 28)
+#define MCP25XXFD_REG_CON_ABAT BIT(27)
+#define MCP25XXFD_REG_CON_REQOP_MASK GENMASK(26, 24)
+#define MCP25XXFD_REG_CON_MODE_MIXED 0
+#define MCP25XXFD_REG_CON_MODE_SLEEP 1
+#define MCP25XXFD_REG_CON_MODE_INT_LOOPBACK 2
+#define MCP25XXFD_REG_CON_MODE_LISTENONLY 3
+#define MCP25XXFD_REG_CON_MODE_CONFIG 4
+#define MCP25XXFD_REG_CON_MODE_EXT_LOOPBACK 5
+#define MCP25XXFD_REG_CON_MODE_CAN2_0 6
+#define MCP25XXFD_REG_CON_MODE_RESTRICTED 7
+#define MCP25XXFD_REG_CON_OPMOD_MASK GENMASK(23, 21)
+#define MCP25XXFD_REG_CON_TXQEN BIT(20)
+#define MCP25XXFD_REG_CON_STEF BIT(19)
+#define MCP25XXFD_REG_CON_SERR2LOM BIT(18)
+#define MCP25XXFD_REG_CON_ESIGM BIT(17)
+#define MCP25XXFD_REG_CON_RTXAT BIT(16)
+#define MCP25XXFD_REG_CON_BRSDIS BIT(12)
+#define MCP25XXFD_REG_CON_BUSY BIT(11)
+#define MCP25XXFD_REG_CON_WFT_MASK GENMASK(10, 9)
+#define MCP25XXFD_REG_CON_WFT_T00FILTER 0x0
+#define MCP25XXFD_REG_CON_WFT_T01FILTER 0x1
+#define MCP25XXFD_REG_CON_WFT_T10FILTER 0x2
+#define MCP25XXFD_REG_CON_WFT_T11FILTER 0x3
+#define MCP25XXFD_REG_CON_WAKFIL BIT(8)
+#define MCP25XXFD_REG_CON_PXEDIS BIT(6)
+#define MCP25XXFD_REG_CON_ISOCRCEN BIT(5)
+#define MCP25XXFD_REG_CON_DNCNT_MASK GENMASK(4, 0)
+
+#define MCP25XXFD_REG_NBTCFG 0x04
+#define MCP25XXFD_REG_NBTCFG_BRP_MASK GENMASK(31, 24)
+#define MCP25XXFD_REG_NBTCFG_TSEG1_MASK GENMASK(23, 16)
+#define MCP25XXFD_REG_NBTCFG_TSEG2_MASK GENMASK(14, 8)
+#define MCP25XXFD_REG_NBTCFG_SJW_MASK GENMASK(6, 0)
+
+#define MCP25XXFD_REG_DBTCFG 0x08
+#define MCP25XXFD_REG_DBTCFG_BRP_MASK GENMASK(31, 24)
+#define MCP25XXFD_REG_DBTCFG_TSEG1_MASK GENMASK(20, 16)
+#define MCP25XXFD_REG_DBTCFG_TSEG2_MASK GENMASK(11, 8)
+#define MCP25XXFD_REG_DBTCFG_SJW_MASK GENMASK(3, 0)
+
+#define MCP25XXFD_REG_TDC 0x0c
+#define MCP25XXFD_REG_TDC_EDGFLTEN BIT(25)
+#define MCP25XXFD_REG_TDC_SID11EN BIT(24)
+#define MCP25XXFD_REG_TDC_TDCMOD_MASK GENMASK(17, 16)
+#define MCP25XXFD_REG_TDC_TDCMOD_AUTO 2
+#define MCP25XXFD_REG_TDC_TDCMOD_MANUAL 1
+#define MCP25XXFD_REG_TDC_TDCMOD_DISABLED 0
+#define MCP25XXFD_REG_TDC_TDCO_MASK GENMASK(14, 8)
+#define MCP25XXFD_REG_TDC_TDCV_MASK GENMASK(5, 0)
+
+#define MCP25XXFD_REG_TBC 0x10
+
+#define MCP25XXFD_REG_TSCON 0x14
+#define MCP25XXFD_REG_TSCON_TSRES BIT(18)
+#define MCP25XXFD_REG_TSCON_TSEOF BIT(17)
+#define MCP25XXFD_REG_TSCON_TBCEN BIT(16)
+#define MCP25XXFD_REG_TSCON_TBCPRE_MASK GENMASK(9, 0)
+
+#define MCP25XXFD_REG_VEC 0x18
+#define MCP25XXFD_REG_VEC_RXCODE_MASK GENMASK(30, 24)
+#define MCP25XXFD_REG_VEC_TXCODE_MASK GENMASK(22, 16)
+#define MCP25XXFD_REG_VEC_FILHIT_MASK GENMASK(12, 8)
+#define MCP25XXFD_REG_VEC_ICODE_MASK GENMASK(6, 0)
+
+#define MCP25XXFD_REG_INT 0x1c
+#define MCP25XXFD_REG_INT_IF_MASK GENMASK(15, 0)
+#define MCP25XXFD_REG_INT_IE_MASK GENMASK(31, 16)
+#define MCP25XXFD_REG_INT_IVMIE BIT(31)
+#define MCP25XXFD_REG_INT_WAKIE BIT(30)
+#define MCP25XXFD_REG_INT_CERRIE BIT(29)
+#define MCP25XXFD_REG_INT_SERRIE BIT(28)
+#define MCP25XXFD_REG_INT_RXOVIE BIT(27)
+#define MCP25XXFD_REG_INT_TXATIE BIT(26)
+#define MCP25XXFD_REG_INT_SPICRCIE BIT(25)
+#define MCP25XXFD_REG_INT_ECCIE BIT(24)
+#define MCP25XXFD_REG_INT_TEFIE BIT(20)
+#define MCP25XXFD_REG_INT_MODIE BIT(19)
+#define MCP25XXFD_REG_INT_TBCIE BIT(18)
+#define MCP25XXFD_REG_INT_RXIE BIT(17)
+#define MCP25XXFD_REG_INT_TXIE BIT(16)
+#define MCP25XXFD_REG_INT_IVMIF BIT(15)
+#define MCP25XXFD_REG_INT_WAKIF BIT(14)
+#define MCP25XXFD_REG_INT_CERRIF BIT(13)
+#define MCP25XXFD_REG_INT_SERRIF BIT(12)
+#define MCP25XXFD_REG_INT_RXOVIF BIT(11)
+#define MCP25XXFD_REG_INT_TXATIF BIT(10)
+#define MCP25XXFD_REG_INT_SPICRCIF BIT(9)
+#define MCP25XXFD_REG_INT_ECCIF BIT(8)
+#define MCP25XXFD_REG_INT_TEFIF BIT(4)
+#define MCP25XXFD_REG_INT_MODIF BIT(3)
+#define MCP25XXFD_REG_INT_TBCIF BIT(2)
+#define MCP25XXFD_REG_INT_RXIF BIT(1)
+#define MCP25XXFD_REG_INT_TXIF BIT(0)
+/* These IRQ flags must be cleared by SW in the CAN_INT register */
+#define MCP25XXFD_REG_INT_IF_CLEARABLE_MASK \
+	(MCP25XXFD_REG_INT_IVMIF | MCP25XXFD_REG_INT_WAKIF | \
+	 MCP25XXFD_REG_INT_CERRIF |  MCP25XXFD_REG_INT_SERRIF | \
+	 MCP25XXFD_REG_INT_MODIF)
+
+#define MCP25XXFD_REG_RXIF 0x20
+#define MCP25XXFD_REG_TXIF 0x24
+#define MCP25XXFD_REG_RXOVIF 0x28
+#define MCP25XXFD_REG_TXATIF 0x2c
+#define MCP25XXFD_REG_TXREQ 0x30
+
+#define MCP25XXFD_REG_TREC 0x34
+#define MCP25XXFD_REG_TREC_TXBO BIT(21)
+#define MCP25XXFD_REG_TREC_TXBP BIT(20)
+#define MCP25XXFD_REG_TREC_RXBP BIT(19)
+#define MCP25XXFD_REG_TREC_TXWARN BIT(18)
+#define MCP25XXFD_REG_TREC_RXWARN BIT(17)
+#define MCP25XXFD_REG_TREC_EWARN BIT(16)
+#define MCP25XXFD_REG_TREC_TEC_MASK GENMASK(15, 8)
+#define MCP25XXFD_REG_TREC_REC_MASK GENMASK(7, 0)
+
+#define MCP25XXFD_REG_BDIAG0 0x38
+#define MCP25XXFD_REG_BDIAG0_DTERRCNT_MASK GENMASK(31, 24)
+#define MCP25XXFD_REG_BDIAG0_DRERRCNT_MASK GENMASK(23, 16)
+#define MCP25XXFD_REG_BDIAG0_NTERRCNT_MASK GENMASK(15, 8)
+#define MCP25XXFD_REG_BDIAG0_NRERRCNT_MASK GENMASK(7, 0)
+
+#define MCP25XXFD_REG_BDIAG1 0x3c
+#define MCP25XXFD_REG_BDIAG1_DLCMM BIT(31)
+#define MCP25XXFD_REG_BDIAG1_ESI BIT(30)
+#define MCP25XXFD_REG_BDIAG1_DCRCERR BIT(29)
+#define MCP25XXFD_REG_BDIAG1_DSTUFERR BIT(28)
+#define MCP25XXFD_REG_BDIAG1_DFORMERR BIT(27)
+#define MCP25XXFD_REG_BDIAG1_DBIT1ERR BIT(25)
+#define MCP25XXFD_REG_BDIAG1_DBIT0ERR BIT(24)
+#define MCP25XXFD_REG_BDIAG1_TXBOERR BIT(23)
+#define MCP25XXFD_REG_BDIAG1_NCRCERR BIT(21)
+#define MCP25XXFD_REG_BDIAG1_NSTUFERR BIT(20)
+#define MCP25XXFD_REG_BDIAG1_NFORMERR BIT(19)
+#define MCP25XXFD_REG_BDIAG1_NACKERR BIT(18)
+#define MCP25XXFD_REG_BDIAG1_NBIT1ERR BIT(17)
+#define MCP25XXFD_REG_BDIAG1_NBIT0ERR BIT(16)
+#define MCP25XXFD_REG_BDIAG1_BERR_MASK \
+	(MCP25XXFD_REG_BDIAG1_DLCMM | MCP25XXFD_REG_BDIAG1_ESI | \
+	 MCP25XXFD_REG_BDIAG1_DCRCERR | MCP25XXFD_REG_BDIAG1_DSTUFERR | \
+	 MCP25XXFD_REG_BDIAG1_DFORMERR | MCP25XXFD_REG_BDIAG1_DBIT1ERR | \
+	 MCP25XXFD_REG_BDIAG1_DBIT0ERR | MCP25XXFD_REG_BDIAG1_TXBOERR | \
+	 MCP25XXFD_REG_BDIAG1_NCRCERR | MCP25XXFD_REG_BDIAG1_NSTUFERR | \
+	 MCP25XXFD_REG_BDIAG1_NFORMERR | MCP25XXFD_REG_BDIAG1_NACKERR | \
+	 MCP25XXFD_REG_BDIAG1_NBIT1ERR | MCP25XXFD_REG_BDIAG1_NBIT0ERR)
+#define MCP25XXFD_REG_BDIAG1_EFMSGCNT_MASK GENMASK(15, 0)
+
+#define MCP25XXFD_REG_TEFCON 0x40
+#define MCP25XXFD_REG_TEFCON_FSIZE_MASK GENMASK(28, 24)
+#define MCP25XXFD_REG_TEFCON_FRESET BIT(10)
+#define MCP25XXFD_REG_TEFCON_UINC BIT(8)
+#define MCP25XXFD_REG_TEFCON_TEFTSEN BIT(5)
+#define MCP25XXFD_REG_TEFCON_TEFOVIE BIT(3)
+#define MCP25XXFD_REG_TEFCON_TEFFIE BIT(2)
+#define MCP25XXFD_REG_TEFCON_TEFHIE BIT(1)
+#define MCP25XXFD_REG_TEFCON_TEFNEIE BIT(0)
+
+#define MCP25XXFD_REG_TEFSTA 0x44
+#define MCP25XXFD_REG_TEFSTA_TEFOVIF BIT(3)
+#define MCP25XXFD_REG_TEFSTA_TEFFIF BIT(2)
+#define MCP25XXFD_REG_TEFSTA_TEFHIF BIT(1)
+#define MCP25XXFD_REG_TEFSTA_TEFNEIF BIT(0)
+
+#define MCP25XXFD_REG_TEFUA 0x48
+
+#define MCP25XXFD_REG_TXQCON 0x50
+#define MCP25XXFD_REG_TXQCON_PLSIZE_MASK GENMASK(31, 29)
+#define MCP25XXFD_REG_TXQCON_PLSIZE_8 0
+#define MCP25XXFD_REG_TXQCON_PLSIZE_12 1
+#define MCP25XXFD_REG_TXQCON_PLSIZE_16 2
+#define MCP25XXFD_REG_TXQCON_PLSIZE_20 3
+#define MCP25XXFD_REG_TXQCON_PLSIZE_24 4
+#define MCP25XXFD_REG_TXQCON_PLSIZE_32 5
+#define MCP25XXFD_REG_TXQCON_PLSIZE_48 6
+#define MCP25XXFD_REG_TXQCON_PLSIZE_64 7
+#define MCP25XXFD_REG_TXQCON_FSIZE_MASK GENMASK(28, 24)
+#define MCP25XXFD_REG_TXQCON_TXAT_UNLIMITED 3
+#define MCP25XXFD_REG_TXQCON_TXAT_THREE_SHOT 1
+#define MCP25XXFD_REG_TXQCON_TXAT_ONE_SHOT 0
+#define MCP25XXFD_REG_TXQCON_TXAT_MASK GENMASK(22, 21)
+#define MCP25XXFD_REG_TXQCON_TXPRI_MASK GENMASK(20, 16)
+#define MCP25XXFD_REG_TXQCON_FRESET BIT(10)
+#define MCP25XXFD_REG_TXQCON_TXREQ BIT(9)
+#define MCP25XXFD_REG_TXQCON_UINC BIT(8)
+#define MCP25XXFD_REG_TXQCON_TXEN BIT(7)
+#define MCP25XXFD_REG_TXQCON_TXATIE BIT(4)
+#define MCP25XXFD_REG_TXQCON_TXQEIE BIT(2)
+#define MCP25XXFD_REG_TXQCON_TXQNIE BIT(0)
+
+#define MCP25XXFD_REG_TXQSTA 0x54
+#define MCP25XXFD_REG_TXQSTA_TXQCI_MASK GENMASK(12, 8)
+#define MCP25XXFD_REG_TXQSTA_TXABT BIT(7)
+#define MCP25XXFD_REG_TXQSTA_TXLARB BIT(6)
+#define MCP25XXFD_REG_TXQSTA_TXERR BIT(5)
+#define MCP25XXFD_REG_TXQSTA_TXATIF BIT(4)
+#define MCP25XXFD_REG_TXQSTA_TXQEIF BIT(2)
+#define MCP25XXFD_REG_TXQSTA_TXQNIF BIT(0)
+
+#define MCP25XXFD_REG_TXQUA 0x58
+
+#define MCP25XXFD_REG_FIFOCON(x) (0x50 + 0xc * (x))
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_MASK GENMASK(31, 29)
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_8 0
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_12 1
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_16 2
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_20 3
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_24 4
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_32 5
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_48 6
+#define MCP25XXFD_REG_FIFOCON_PLSIZE_64 7
+#define MCP25XXFD_REG_FIFOCON_FSIZE_MASK GENMASK(28, 24)
+#define MCP25XXFD_REG_FIFOCON_TXAT_MASK GENMASK(22, 21)
+#define MCP25XXFD_REG_FIFOCON_TXAT_ONE_SHOT 0
+#define MCP25XXFD_REG_FIFOCON_TXAT_THREE_SHOT 1
+#define MCP25XXFD_REG_FIFOCON_TXAT_UNLIMITED 3
+#define MCP25XXFD_REG_FIFOCON_TXPRI_MASK GENMASK(20, 16)
+#define MCP25XXFD_REG_FIFOCON_FRESET BIT(10)
+#define MCP25XXFD_REG_FIFOCON_TXREQ BIT(9)
+#define MCP25XXFD_REG_FIFOCON_UINC BIT(8)
+#define MCP25XXFD_REG_FIFOCON_TXEN BIT(7)
+#define MCP25XXFD_REG_FIFOCON_RTREN BIT(6)
+#define MCP25XXFD_REG_FIFOCON_RXTSEN BIT(5)
+#define MCP25XXFD_REG_FIFOCON_TXATIE BIT(4)
+#define MCP25XXFD_REG_FIFOCON_RXOVIE BIT(3)
+#define MCP25XXFD_REG_FIFOCON_TFERFFIE BIT(2)
+#define MCP25XXFD_REG_FIFOCON_TFHRFHIE BIT(1)
+#define MCP25XXFD_REG_FIFOCON_TFNRFNIE BIT(0)
+
+#define MCP25XXFD_REG_FIFOSTA(x) (0x54 + 0xc * (x))
+#define MCP25XXFD_REG_FIFOSTA_FIFOCI_MASK GENMASK(12, 8)
+#define MCP25XXFD_REG_FIFOSTA_TXABT BIT(7)
+#define MCP25XXFD_REG_FIFOSTA_TXLARB BIT(6)
+#define MCP25XXFD_REG_FIFOSTA_TXERR BIT(5)
+#define MCP25XXFD_REG_FIFOSTA_TXATIF BIT(4)
+#define MCP25XXFD_REG_FIFOSTA_RXOVIF BIT(3)
+#define MCP25XXFD_REG_FIFOSTA_TFERFFIF BIT(2)
+#define MCP25XXFD_REG_FIFOSTA_TFHRFHIF BIT(1)
+#define MCP25XXFD_REG_FIFOSTA_TFNRFNIF BIT(0)
+
+#define MCP25XXFD_REG_FIFOUA(x) (0x58 + 0xc * (x))
+
+#define MCP25XXFD_REG_FLTCON(x) (0x1d0 + 0x4 * (x))
+#define MCP25XXFD_REG_FLTCON_FLTEN3 BIT(31)
+#define MCP25XXFD_REG_FLTCON_F3BP_MASK GENMASK(28, 24)
+#define MCP25XXFD_REG_FLTCON_FLTEN2 BIT(23)
+#define MCP25XXFD_REG_FLTCON_F2BP_MASK GENMASK(20, 16)
+#define MCP25XXFD_REG_FLTCON_FLTEN1 BIT(15)
+#define MCP25XXFD_REG_FLTCON_F1BP_MASK GENMASK(12, 8)
+#define MCP25XXFD_REG_FLTCON_FLTEN0 BIT(7)
+#define MCP25XXFD_REG_FLTCON_F0BP_MASK GENMASK(4, 0)
+#define MCP25XXFD_REG_FLTCON_FLTEN(x) (BIT(7) << 8 * ((x) & 0x3))
+#define MCP25XXFD_REG_FLTCON_FLT_MASK(x) (GENMASK(7, 0) << (8 * ((x) & 0x3)))
+#define MCP25XXFD_REG_FLTCON_FBP(x, fifo) ((fifo) << 8 * ((x) & 0x3))
+
+#define MCP25XXFD_REG_FLTOBJ(x) (0x1f0 + 0x8 * (x))
+#define MCP25XXFD_REG_FLTOBJ_EXIDE BIT(30)
+#define MCP25XXFD_REG_FLTOBJ_SID11 BIT(29)
+#define MCP25XXFD_REG_FLTOBJ_EID_MASK GENMASK(28, 11)
+#define MCP25XXFD_REG_FLTOBJ_SID_MASK GENMASK(10, 0)
+
+#define MCP25XXFD_REG_FLTMASK(x) (0x1f4 + 0x8 * (x))
+#define MCP25XXFD_REG_MASK_MIDE BIT(30)
+#define MCP25XXFD_REG_MASK_MSID11 BIT(29)
+#define MCP25XXFD_REG_MASK_MEID_MASK GENMASK(28, 11)
+#define MCP25XXFD_REG_MASK_MSID_MASK GENMASK(10, 0)
+
+/* RAM */
+#define MCP25XXFD_RAM_START 0x400
+#define MCP25XXFD_RAM_SIZE SZ_2K
+
+/* Message Object */
+#define MCP25XXFD_OBJ_ID_SID11 BIT(29)
+#define MCP25XXFD_OBJ_ID_EID_MASK GENMASK(28, 11)
+#define MCP25XXFD_OBJ_ID_SID_MASK GENMASK(10, 0)
+#define MCP25XXFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK GENMASK(31, 9)
+#define MCP25XXFD_OBJ_FLAGS_SEQ_MCP2517FD_MASK GENMASK(15, 9)
+#define MCP25XXFD_OBJ_FLAGS_SEQ_MASK MCP25XXFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK
+#define MCP25XXFD_OBJ_FLAGS_ESI BIT(8)
+#define MCP25XXFD_OBJ_FLAGS_FDF BIT(7)
+#define MCP25XXFD_OBJ_FLAGS_BRS BIT(6)
+#define MCP25XXFD_OBJ_FLAGS_RTR BIT(5)
+#define MCP25XXFD_OBJ_FLAGS_IDE BIT(4)
+#define MCP25XXFD_OBJ_FLAGS_DLC GENMASK(3, 0)
+
+#define MCP25XXFD_REG_FRAME_EFF_SID_MASK GENMASK(28, 18)
+#define MCP25XXFD_REG_FRAME_EFF_EID_MASK GENMASK(17, 0)
+
+/* MCP2517/18FD SFR */
+#define MCP25XXFD_REG_OSC 0xe00
+#define MCP25XXFD_REG_OSC_SCLKRDY BIT(12)
+#define MCP25XXFD_REG_OSC_OSCRDY BIT(10)
+#define MCP25XXFD_REG_OSC_PLLRDY BIT(8)
+#define MCP25XXFD_REG_OSC_CLKODIV_10 3
+#define MCP25XXFD_REG_OSC_CLKODIV_4 2
+#define MCP25XXFD_REG_OSC_CLKODIV_2 1
+#define MCP25XXFD_REG_OSC_CLKODIV_1 0
+#define MCP25XXFD_REG_OSC_CLKODIV_MASK GENMASK(6, 5)
+#define MCP25XXFD_REG_OSC_SCLKDIV BIT(4)
+#define MCP25XXFD_REG_OSC_LPMEN BIT(3)	/* MCP2518FD only */
+#define MCP25XXFD_REG_OSC_OSCDIS BIT(2)
+#define MCP25XXFD_REG_OSC_PLLEN BIT(0)
+
+#define MCP25XXFD_REG_IOCON 0xe04
+#define MCP25XXFD_REG_IOCON_INTOD BIT(30)
+#define MCP25XXFD_REG_IOCON_SOF BIT(29)
+#define MCP25XXFD_REG_IOCON_TXCANOD BIT(28)
+#define MCP25XXFD_REG_IOCON_PM1 BIT(25)
+#define MCP25XXFD_REG_IOCON_PM0 BIT(24)
+#define MCP25XXFD_REG_IOCON_GPIO1 BIT(17)
+#define MCP25XXFD_REG_IOCON_GPIO0 BIT(16)
+#define MCP25XXFD_REG_IOCON_LAT1 BIT(9)
+#define MCP25XXFD_REG_IOCON_LAT0 BIT(8)
+#define MCP25XXFD_REG_IOCON_XSTBYEN BIT(6)
+#define MCP25XXFD_REG_IOCON_TRIS1 BIT(1)
+#define MCP25XXFD_REG_IOCON_TRIS0 BIT(0)
+
+#define MCP25XXFD_REG_CRC 0xe08
+#define MCP25XXFD_REG_CRC_FERRIE BIT(25)
+#define MCP25XXFD_REG_CRC_CRCERRIE BIT(24)
+#define MCP25XXFD_REG_CRC_FERRIF BIT(17)
+#define MCP25XXFD_REG_CRC_CRCERRIF BIT(16)
+#define MCP25XXFD_REG_CRC_IF_MASK GENMASK(17, 16)
+#define MCP25XXFD_REG_CRC_MASK GENMASK(15, 0)
+
+#define MCP25XXFD_REG_ECCCON 0xe0c
+#define MCP25XXFD_REG_ECCCON_PARITY_MASK GENMASK(14, 8)
+#define MCP25XXFD_REG_ECCCON_DEDIE BIT(2)
+#define MCP25XXFD_REG_ECCCON_SECIE BIT(1)
+#define MCP25XXFD_REG_ECCCON_ECCEN BIT(0)
+
+#define MCP25XXFD_REG_ECCSTAT 0xe10
+#define MCP25XXFD_REG_ECCSTAT_ERRADDR_MASK GENMASK(27, 16)
+#define MCP25XXFD_REG_ECCSTAT_IF_MASK GENMASK(2, 1)
+#define MCP25XXFD_REG_ECCSTAT_DEDIF BIT(2)
+#define MCP25XXFD_REG_ECCSTAT_SECIF BIT(1)
+
+#define MCP25XXFD_REG_DEVID 0xe14	/* MCP2518FD only */
+#define MCP25XXFD_REG_DEVID_ID_MASK GENMASK(7, 4)
+#define MCP25XXFD_REG_DEVID_REV_MASK GENMASK(3, 0)
+
+/* number of TX FIFO objects, depending on CAN mode
+ *
+ * FIFO setup: tef: 8*12 bytes = 96 bytes, tx: 8*16 bytes = 128 bytes
+ * FIFO setup: tef: 4*12 bytes = 48 bytes, tx: 4*72 bytes = 288 bytes
+ */
+#define MCP25XXFD_TX_OBJ_NUM_CAN 8
+#define MCP25XXFD_TX_OBJ_NUM_CANFD 4
+
+#if MCP25XXFD_TX_OBJ_NUM_CAN > MCP25XXFD_TX_OBJ_NUM_CANFD
+#define MCP25XXFD_TX_OBJ_NUM_MAX MCP25XXFD_TX_OBJ_NUM_CAN
+#else
+#define MCP25XXFD_TX_OBJ_NUM_MAX MCP25XXFD_TX_OBJ_NUM_CANFD
+#endif
+
+#define MCP25XXFD_NAPI_WEIGHT 32
+#define MCP25XXFD_TX_FIFO 1
+#define MCP25XXFD_RX_FIFO(x) (MCP25XXFD_TX_FIFO + 1 + (x))
+
+/* SPI commands */
+#define MCP25XXFD_SPI_INSTRUCTION_RESET 0x0000
+#define MCP25XXFD_SPI_INSTRUCTION_WRITE 0x2000
+#define MCP25XXFD_SPI_INSTRUCTION_READ 0x3000
+#define MCP25XXFD_SPI_INSTRUCTION_WRITE_CRC 0xa000
+#define MCP25XXFD_SPI_INSTRUCTION_READ_CRC 0xb000
+#define MCP25XXFD_SPI_INSTRUCTION_WRITE_CRC_SAFE 0xc000
+#define MCP25XXFD_SPI_ADDRESS_MASK GENMASK(11, 0)
+
+#define MCP25XXFD_SYSCLOCK_HZ_MAX 40000000
+#define MCP25XXFD_SYSCLOCK_HZ_MIN 1000000
+#define MCP25XXFD_SPICLOCK_HZ_MAX 20000000
+#define MCP25XXFD_OSC_PLL_MULTIPLIER 10
+#define MCP25XXFD_OSC_STAB_SLEEP_US (3 * USEC_PER_MSEC)
+#define MCP25XXFD_OSC_STAB_TIMEOUT_US (10 * MCP25XXFD_OSC_STAB_SLEEP_US)
+#define MCP25XXFD_POLL_SLEEP_US (10)
+#define MCP25XXFD_POLL_TIMEOUT_US (USEC_PER_MSEC)
+#define MCP25XXFD_SOFTRESET_RETRIES_MAX 3
+#define MCP25XXFD_READ_CRC_RETRIES_MAX 3
+#define MCP25XXFD_ECC_CNT_MAX 2
+
+/* Silence TX MAB overflow warnings */
+#define MCP25XXFD_QUIRK_MAB_NO_WARN BIT(0)
+/* Use CRC to access registers */
+#define MCP25XXFD_QUIRK_CRC_REG BIT(1)
+/* Use CRC to access RX/TEF-RAM */
+#define MCP25XXFD_QUIRK_CRC_RX BIT(2)
+/* Use CRC to access TX-RAM */
+#define MCP25XXFD_QUIRK_CRC_TX BIT(3)
+/* Enable ECC for RAM */
+#define MCP25XXFD_QUIRK_ECC BIT(4)
+/* Use Half Duplex SPI transfers */
+#define MCP25XXFD_QUIRK_HALF_DUPLEX BIT(5)
+
+struct mcp25xxfd_hw_tef_obj {
+	u32 id;
+	u32 flags;
+	u32 ts;
+};
+
+/* The tx_obj_raw version is used in spi async, i.e. without
+ * regmap. We have to take care of endianness ourselves.
+ */
+struct mcp25xxfd_hw_tx_obj_raw {
+	__le32 id;
+	__le32 flags;
+	u8 data[sizeof_field(struct canfd_frame, data)];
+};
+
+struct mcp25xxfd_hw_tx_obj_can {
+	u32 id;
+	u32 flags;
+	u8 data[sizeof_field(struct can_frame, data)];
+};
+
+struct mcp25xxfd_hw_tx_obj_canfd {
+	u32 id;
+	u32 flags;
+	u8 data[sizeof_field(struct canfd_frame, data)];
+};
+
+struct mcp25xxfd_hw_rx_obj_can {
+	u32 id;
+	u32 flags;
+	u32 ts;
+	u8 data[sizeof_field(struct can_frame, data)];
+};
+
+struct mcp25xxfd_hw_rx_obj_canfd {
+	u32 id;
+	u32 flags;
+	u32 ts;
+	u8 data[sizeof_field(struct canfd_frame, data)];
+};
+
+struct mcp25xxfd_tef_ring {
+	unsigned int head;
+	unsigned int tail;
+
+	/* u8 obj_num equals tx_ring->obj_num */
+	/* u8 obj_size equals sizeof(struct mcp25xxfd_hw_tef_obj) */
+};
+
+struct __packed mcp25xxfd_buf_cmd {
+	__be16 cmd;
+};
+
+struct __packed mcp25xxfd_buf_cmd_crc {
+	__be16 cmd;
+	u8 len;
+};
+
+union mcp25xxfd_tx_obj_load_buf {
+	struct __packed {
+		struct mcp25xxfd_buf_cmd cmd;
+		struct mcp25xxfd_hw_tx_obj_raw hw_tx_obj;
+	} nocrc;
+	struct __packed {
+		struct mcp25xxfd_buf_cmd_crc cmd;
+		struct mcp25xxfd_hw_tx_obj_raw hw_tx_obj;
+		__be16 crc;
+	} crc;
+} ____cacheline_aligned;
+
+union mcp25xxfd_write_reg_buf {
+	struct __packed {
+		struct mcp25xxfd_buf_cmd cmd;
+		u8 data[4];
+	} nocrc;
+	struct __packed {
+		struct mcp25xxfd_buf_cmd_crc cmd;
+		u8 data[4];
+		__be16 crc;
+	} crc;
+} ____cacheline_aligned;
+
+struct mcp25xxfd_tx_obj {
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	union mcp25xxfd_tx_obj_load_buf buf;
+};
+
+struct mcp25xxfd_tx_ring {
+	unsigned int head;
+	unsigned int tail;
+
+	u16 base;
+	u8 obj_num;
+	u8 obj_size;
+
+	struct mcp25xxfd_tx_obj obj[MCP25XXFD_TX_OBJ_NUM_MAX];
+	union mcp25xxfd_write_reg_buf rts_buf;
+};
+
+struct mcp25xxfd_rx_ring {
+	unsigned int head;
+	unsigned int tail;
+
+	u16 base;
+	u8 nr;
+	u8 fifo_nr;
+	u8 obj_num;
+	u8 obj_size;
+
+	struct mcp25xxfd_hw_rx_obj_canfd obj[];
+};
+
+struct __packed mcp25xxfd_map_buf_nocrc {
+	struct mcp25xxfd_buf_cmd cmd;
+	u8 data[256];
+} ____cacheline_aligned;
+
+struct __packed mcp25xxfd_map_buf_crc {
+	struct mcp25xxfd_buf_cmd_crc cmd;
+	u8 data[256 - 4];
+	__be16 crc;
+} ____cacheline_aligned;
+
+struct mcp25xxfd_ecc {
+	u32 ecc_stat;
+	int cnt;
+};
+
+struct mcp25xxfd_regs_status {
+	u32 intf;
+};
+
+enum mcp25xxfd_model {
+	MCP25XXFD_MODEL_MCP2517FD = 0x2517,
+	MCP25XXFD_MODEL_MCP2518FD = 0x2518,
+	MCP25XXFD_MODEL_MCP25XXFD = 0xffff,	/* autodetect model */
+};
+
+struct mcp25xxfd_devtype_data {
+	enum mcp25xxfd_model model;
+	u32 quirks;
+};
+
+struct mcp25xxfd_priv {
+	struct can_priv can;
+	struct can_rx_offload offload;
+	struct net_device *ndev;
+
+	struct regmap *map_reg;			/* register access */
+	struct regmap *map_rx;			/* RX/TEF RAM access */
+
+	struct regmap *map_nocrc;
+	struct mcp25xxfd_map_buf_nocrc *map_buf_nocrc_rx;
+	struct mcp25xxfd_map_buf_nocrc *map_buf_nocrc_tx;
+
+	struct regmap *map_crc;
+	struct mcp25xxfd_map_buf_crc *map_buf_crc_rx;
+	struct mcp25xxfd_map_buf_crc *map_buf_crc_tx;
+
+	struct spi_device *spi;
+	u32 spi_max_speed_hz_orig;
+
+	struct mcp25xxfd_tef_ring tef;
+	struct mcp25xxfd_tx_ring tx[1];
+	struct mcp25xxfd_rx_ring *rx[1];
+
+	u8 rx_ring_num;
+
+	struct mcp25xxfd_ecc ecc;
+	struct mcp25xxfd_regs_status regs_status;
+
+	struct gpio_desc *rx_int;
+	struct clk *clk;
+	struct regulator *reg_vdd;
+	struct regulator *reg_xceiver;
+
+	struct mcp25xxfd_devtype_data devtype_data;
+	struct can_berr_counter bec;
+};
+
+#define MCP25XXFD_IS(_model) \
+static inline bool \
+mcp25xxfd_is_##_model(const struct mcp25xxfd_priv *priv) \
+{ \
+	return priv->devtype_data.model == MCP25XXFD_MODEL_MCP##_model##FD; \
+}
+
+MCP25XXFD_IS(2517);
+MCP25XXFD_IS(2518);
+MCP25XXFD_IS(25XX);
+
+static inline u8 mcp25xxfd_first_byte_set(u32 mask)
+{
+	return (mask & 0x0000ffff) ?
+		((mask & 0x000000ff) ? 0 : 1) :
+		((mask & 0x00ff0000) ? 2 : 3);
+}
+
+static inline u8 mcp25xxfd_last_byte_set(u32 mask)
+{
+	return (mask & 0xffff0000) ?
+		((mask & 0xff000000) ? 3 : 2) :
+		((mask & 0x0000ff00) ? 1 : 0);
+}
+
+static inline __be16 mcp25xxfd_cmd_reset(void)
+{
+	return cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_RESET);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_read_nocrc(struct mcp25xxfd_buf_cmd *cmd, u16 addr)
+{
+	cmd->cmd = cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_READ | addr);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_write_nocrc(struct mcp25xxfd_buf_cmd *cmd, u16 addr)
+{
+	cmd->cmd = cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_WRITE | addr);
+}
+
+static inline bool mcp25xxfd_reg_in_ram(unsigned int reg)
+{
+	static const struct regmap_range range =
+		regmap_reg_range(MCP25XXFD_RAM_START,
+				 MCP25XXFD_RAM_START + MCP25XXFD_RAM_SIZE - 4);
+
+	return regmap_reg_in_range(reg, &range);
+}
+
+static inline void
+__mcp25xxfd_spi_cmd_crc_set_len(struct mcp25xxfd_buf_cmd_crc *cmd,
+				u16 len, bool in_ram)
+{
+	/* Number of u32 for RAM access, number of u8 otherwise. */
+	if (in_ram)
+		cmd->len = len >> 2;
+	else
+		cmd->len = len;
+}
+
+static inline void
+mcp25xxfd_spi_cmd_crc_set_len_in_ram(struct mcp25xxfd_buf_cmd_crc *cmd, u16 len)
+{
+	__mcp25xxfd_spi_cmd_crc_set_len(cmd, len, true);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_crc_set_len_in_reg(struct mcp25xxfd_buf_cmd_crc *cmd, u16 len)
+{
+	__mcp25xxfd_spi_cmd_crc_set_len(cmd, len, false);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_read_crc_set_addr(struct mcp25xxfd_buf_cmd_crc *cmd, u16 addr)
+{
+	cmd->cmd = cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_READ_CRC | addr);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_read_crc(struct mcp25xxfd_buf_cmd_crc *cmd,
+			   u16 addr, u16 len)
+{
+	mcp25xxfd_spi_cmd_read_crc_set_addr(cmd, addr);
+	__mcp25xxfd_spi_cmd_crc_set_len(cmd, len, mcp25xxfd_reg_in_ram(addr));
+}
+
+static inline void
+mcp25xxfd_spi_cmd_write_crc_set_addr(struct mcp25xxfd_buf_cmd_crc *cmd,
+				     u16 addr)
+{
+	cmd->cmd = cpu_to_be16(MCP25XXFD_SPI_INSTRUCTION_WRITE_CRC | addr);
+}
+
+static inline void
+mcp25xxfd_spi_cmd_write_crc(struct mcp25xxfd_buf_cmd_crc *cmd,
+			    u16 addr, u16 len)
+{
+	mcp25xxfd_spi_cmd_write_crc_set_addr(cmd, addr);
+	__mcp25xxfd_spi_cmd_crc_set_len(cmd, len, mcp25xxfd_reg_in_ram(addr));
+}
+
+static inline u8 *
+mcp25xxfd_spi_cmd_write(const struct mcp25xxfd_priv *priv,
+			union mcp25xxfd_write_reg_buf *write_reg_buf,
+			u16 addr)
+{
+	u8 *data;
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG) {
+		mcp25xxfd_spi_cmd_write_crc_set_addr(&write_reg_buf->crc.cmd,
+						     addr);
+		data = write_reg_buf->crc.data;
+	} else {
+		mcp25xxfd_spi_cmd_write_nocrc(&write_reg_buf->nocrc.cmd,
+					      addr);
+		data = write_reg_buf->nocrc.data;
+	}
+
+	return data;
+}
+
+static inline u16 mcp25xxfd_get_tef_obj_addr(u8 n)
+{
+	return MCP25XXFD_RAM_START +
+		sizeof(struct mcp25xxfd_hw_tef_obj) * n;
+}
+
+static inline u16
+mcp25xxfd_get_tx_obj_addr(const struct mcp25xxfd_tx_ring *ring, u8 n)
+{
+	return ring->base + ring->obj_size * n;
+}
+
+static inline u16
+mcp25xxfd_get_rx_obj_addr(const struct mcp25xxfd_rx_ring *ring, u8 n)
+{
+	return ring->base + ring->obj_size * n;
+}
+
+static inline u8 mcp25xxfd_get_tef_head(const struct mcp25xxfd_priv *priv)
+{
+	return priv->tef.head & (priv->tx->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_tef_tail(const struct mcp25xxfd_priv *priv)
+{
+	return priv->tef.tail & (priv->tx->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_tef_len(const struct mcp25xxfd_priv *priv)
+{
+	return priv->tef.head - priv->tef.tail;
+}
+
+static inline u8 mcp25xxfd_get_tef_linear_len(const struct mcp25xxfd_priv *priv)
+{
+	u8 len;
+
+	len = mcp25xxfd_get_tef_len(priv);
+
+	return min_t(u8, len, priv->tx->obj_num - mcp25xxfd_get_tef_tail(priv));
+}
+
+static inline u8 mcp25xxfd_get_tx_head(const struct mcp25xxfd_tx_ring *ring)
+{
+	return ring->head & (ring->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_tx_tail(const struct mcp25xxfd_tx_ring *ring)
+{
+	return ring->tail & (ring->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_tx_free(const struct mcp25xxfd_tx_ring *ring)
+{
+	return ring->obj_num - (ring->head - ring->tail);
+}
+
+static inline int
+mcp25xxfd_get_tx_nr_by_addr(const struct mcp25xxfd_tx_ring *tx_ring, u8 *nr,
+			    u16 addr)
+{
+	if (addr < mcp25xxfd_get_tx_obj_addr(tx_ring, 0) ||
+	    addr >= mcp25xxfd_get_tx_obj_addr(tx_ring, tx_ring->obj_num))
+		return -ENOENT;
+
+	*nr = (addr - mcp25xxfd_get_tx_obj_addr(tx_ring, 0)) /
+		tx_ring->obj_size;
+
+	return 0;
+}
+
+static inline u8 mcp25xxfd_get_rx_head(const struct mcp25xxfd_rx_ring *ring)
+{
+	return ring->head & (ring->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_rx_tail(const struct mcp25xxfd_rx_ring *ring)
+{
+	return ring->tail & (ring->obj_num - 1);
+}
+
+static inline u8 mcp25xxfd_get_rx_len(const struct mcp25xxfd_rx_ring *ring)
+{
+	return ring->head - ring->tail;
+}
+
+static inline u8
+mcp25xxfd_get_rx_linear_len(const struct mcp25xxfd_rx_ring *ring)
+{
+	u8 len;
+
+	len = mcp25xxfd_get_rx_len(ring);
+
+	return min_t(u8, len, ring->obj_num - mcp25xxfd_get_rx_tail(ring));
+}
+
+#define mcp25xxfd_for_each_tx_obj(ring, _obj, n) \
+	for ((n) = 0, (_obj) = &(ring)->obj[(n)]; \
+	     (n) < (ring)->obj_num; \
+	     (n)++, (_obj) = &(ring)->obj[(n)])
+
+#define mcp25xxfd_for_each_rx_ring(priv, ring, n) \
+	for ((n) = 0, (ring) = *((priv)->rx + (n)); \
+	     (n) < (priv)->rx_ring_num; \
+	     (n)++, (ring) = *((priv)->rx + (n)))
+
+int mcp25xxfd_regmap_init(struct mcp25xxfd_priv *priv);
+u16 mcp25xxfd_crc16_compute2(const void *cmd, size_t cmd_size,
+			     const void *data, size_t data_size);
+u16 mcp25xxfd_crc16_compute(const void *data, size_t data_size);
+
+#endif
-- 
2.28.0

[PATCH 35/37] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN

[Marc Kleine-Budde]

This patch adds support for the Microchip MCP25xxFD SPI CAN controller family.

Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp25xxfd/Makefile        |    1 +
 .../net/can/spi/mcp25xxfd/mcp25xxfd-core.c    | 2900 +++++++++++++++++
 2 files changed, 2901 insertions(+)
 create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c

diff --git a/drivers/net/can/spi/mcp25xxfd/Makefile b/drivers/net/can/spi/mcp25xxfd/Makefile
index 9dadf0070b42..4e17f592e22e 100644
--- a/drivers/net/can/spi/mcp25xxfd/Makefile
+++ b/drivers/net/can/spi/mcp25xxfd/Makefile
@@ -3,5 +3,6 @@
 obj-$(CONFIG_CAN_MCP25XXFD) += mcp25xxfd.o
 
 mcp25xxfd-objs :=
+mcp25xxfd-objs += mcp25xxfd-core.o
 mcp25xxfd-objs += mcp25xxfd-crc16.o
 mcp25xxfd-objs += mcp25xxfd-regmap.o
diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
new file mode 100644
index 000000000000..043259b3e04e
--- /dev/null
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
@@ -0,0 +1,2900 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp25xxfd - Microchip MCP25xxFD Family CAN controller driver
+//
+// Copyright (c) 2019, 2020 Pengutronix,
+//                          Marc Kleine-Budde <kernel@pengutronix.de>
+//
+// Based on:
+//
+// CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface
+//
+// Copyright (c) 2019 Martin Sperl <kernel@martin.sperl.org>
+//
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/unaligned.h>
+
+#include "mcp25xxfd.h"
+
+#define DEVICE_NAME "mcp25xxfd"
+
+static const struct mcp25xxfd_devtype_data mcp25xxfd_devtype_data_mcp2517fd = {
+	.quirks = MCP25XXFD_QUIRK_MAB_NO_WARN | MCP25XXFD_QUIRK_CRC_REG |
+		MCP25XXFD_QUIRK_CRC_RX | MCP25XXFD_QUIRK_CRC_TX |
+		MCP25XXFD_QUIRK_ECC,
+	.model = MCP25XXFD_MODEL_MCP2517FD,
+};
+
+static const struct mcp25xxfd_devtype_data mcp25xxfd_devtype_data_mcp2518fd = {
+	.quirks = MCP25XXFD_QUIRK_CRC_REG | MCP25XXFD_QUIRK_CRC_RX |
+		MCP25XXFD_QUIRK_CRC_TX | MCP25XXFD_QUIRK_ECC,
+	.model = MCP25XXFD_MODEL_MCP2518FD,
+};
+
+/* Autodetect model, start with CRC enabled. */
+static const struct mcp25xxfd_devtype_data mcp25xxfd_devtype_data_mcp25xxfd = {
+	.quirks = MCP25XXFD_QUIRK_CRC_REG | MCP25XXFD_QUIRK_CRC_RX |
+		MCP25XXFD_QUIRK_CRC_TX | MCP25XXFD_QUIRK_ECC,
+	.model = MCP25XXFD_MODEL_MCP25XXFD,
+};
+
+static const struct can_bittiming_const mcp25xxfd_bittiming_const = {
+	.name = DEVICE_NAME,
+	.tseg1_min = 2,
+	.tseg1_max = 256,
+	.tseg2_min = 1,
+	.tseg2_max = 128,
+	.sjw_max = 128,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
+static const struct can_bittiming_const mcp25xxfd_data_bittiming_const = {
+	.name = DEVICE_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 32,
+	.tseg2_min = 1,
+	.tseg2_max = 16,
+	.sjw_max = 16,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
+static const char *__mcp25xxfd_get_model_str(enum mcp25xxfd_model model)
+{
+	switch (model) {
+	case MCP25XXFD_MODEL_MCP2517FD:
+		return "MCP2517FD"; break;
+	case MCP25XXFD_MODEL_MCP2518FD:
+		return "MCP2518FD"; break;
+	case MCP25XXFD_MODEL_MCP25XXFD:
+		return "MCP25xxFD"; break;
+	}
+
+	return "<unknown>";
+}
+
+static inline const char *
+mcp25xxfd_get_model_str(const struct mcp25xxfd_priv *priv)
+{
+	return __mcp25xxfd_get_model_str(priv->devtype_data.model);
+}
+
+static const char *mcp25xxfd_get_mode_str(const u8 mode)
+{
+	switch (mode) {
+	case MCP25XXFD_REG_CON_MODE_MIXED:
+		return "Mixed (CAN FD/CAN 2.0)"; break;
+	case MCP25XXFD_REG_CON_MODE_SLEEP:
+		return "Sleep"; break;
+	case MCP25XXFD_REG_CON_MODE_INT_LOOPBACK:
+		return "Internal Loopback"; break;
+	case MCP25XXFD_REG_CON_MODE_LISTENONLY:
+		return "Listen Only"; break;
+	case MCP25XXFD_REG_CON_MODE_CONFIG:
+		return "Configuration"; break;
+	case MCP25XXFD_REG_CON_MODE_EXT_LOOPBACK:
+		return "External Loopback"; break;
+	case MCP25XXFD_REG_CON_MODE_CAN2_0:
+		return "CAN 2.0"; break;
+	case MCP25XXFD_REG_CON_MODE_RESTRICTED:
+		return "Restricted Operation"; break;
+	}
+
+	return "<unknown>";
+}
+
+static inline int mcp25xxfd_vdd_enable(const struct mcp25xxfd_priv *priv)
+{
+	if (!priv->reg_vdd)
+		return 0;
+
+	return regulator_enable(priv->reg_vdd);
+}
+
+static inline int mcp25xxfd_vdd_disable(const struct mcp25xxfd_priv *priv)
+{
+	if (!priv->reg_vdd)
+		return 0;
+
+	return regulator_disable(priv->reg_vdd);
+}
+
+static inline int
+mcp25xxfd_transceiver_enable(const struct mcp25xxfd_priv *priv)
+{
+	if (!priv->reg_xceiver)
+		return 0;
+
+	return regulator_enable(priv->reg_xceiver);
+}
+
+static inline int
+mcp25xxfd_transceiver_disable(const struct mcp25xxfd_priv *priv)
+{
+	if (!priv->reg_xceiver)
+		return 0;
+
+	return regulator_disable(priv->reg_xceiver);
+}
+
+static int mcp25xxfd_clks_and_vdd_enable(const struct mcp25xxfd_priv *priv)
+{
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+
+	err = mcp25xxfd_vdd_enable(priv);
+	if (err)
+		clk_disable_unprepare(priv->clk);
+
+	/* Wait for oscillator stabilisation time after power up */
+	usleep_range(MCP25XXFD_OSC_STAB_SLEEP_US,
+		     2 * MCP25XXFD_OSC_STAB_SLEEP_US);
+
+	return err;
+}
+
+static int mcp25xxfd_clks_and_vdd_disable(const struct mcp25xxfd_priv *priv)
+{
+	int err;
+
+	err = mcp25xxfd_vdd_disable(priv);
+	if (err)
+		return err;
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static inline u8
+mcp25xxfd_cmd_prepare_write_reg(const struct mcp25xxfd_priv *priv,
+				union mcp25xxfd_write_reg_buf *write_reg_buf,
+				const u16 reg, const u32 mask, const u32 val)
+{
+	u8 first_byte, last_byte, len;
+	u8 *data;
+	__le32 val_le32;
+
+	first_byte = mcp25xxfd_first_byte_set(mask);
+	last_byte = mcp25xxfd_last_byte_set(mask);
+	len = last_byte - first_byte + 1;
+
+	data = mcp25xxfd_spi_cmd_write(priv, write_reg_buf, reg + first_byte);
+	val_le32 = cpu_to_le32(val >> BITS_PER_BYTE * first_byte);
+	memcpy(data, &val_le32, len);
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_REG) {
+		u16 crc;
+
+		mcp25xxfd_spi_cmd_crc_set_len_in_reg(&write_reg_buf->crc.cmd,
+						     len);
+		/* CRC */
+		len += sizeof(write_reg_buf->crc.cmd);
+		crc = mcp25xxfd_crc16_compute(&write_reg_buf->crc, len);
+		put_unaligned_be16(crc, (void *)write_reg_buf + len);
+
+		/* Total length */
+		len += sizeof(write_reg_buf->crc.crc);
+	} else {
+		len += sizeof(write_reg_buf->nocrc.cmd);
+	}
+
+	return len;
+}
+
+static inline int
+mcp25xxfd_tef_tail_get_from_chip(const struct mcp25xxfd_priv *priv,
+				 u8 *tef_tail)
+{
+	u32 tef_ua;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_TEFUA, &tef_ua);
+	if (err)
+		return err;
+
+	*tef_tail = tef_ua / sizeof(struct mcp25xxfd_hw_tef_obj);
+
+	return 0;
+}
+
+static inline int
+mcp25xxfd_tx_tail_get_from_chip(const struct mcp25xxfd_priv *priv,
+				u8 *tx_tail)
+{
+	u32 fifo_sta;
+	int err;
+
+	err = regmap_read(priv->map_reg,
+			  MCP25XXFD_REG_FIFOSTA(MCP25XXFD_TX_FIFO),
+			  &fifo_sta);
+	if (err)
+		return err;
+
+	*tx_tail = FIELD_GET(MCP25XXFD_REG_FIFOSTA_FIFOCI_MASK, fifo_sta);
+
+	return 0;
+}
+
+static inline int
+mcp25xxfd_rx_head_get_from_chip(const struct mcp25xxfd_priv *priv,
+				const struct mcp25xxfd_rx_ring *ring,
+				u8 *rx_head)
+{
+	u32 fifo_sta;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_FIFOSTA(ring->fifo_nr),
+			  &fifo_sta);
+	if (err)
+		return err;
+
+	*rx_head = FIELD_GET(MCP25XXFD_REG_FIFOSTA_FIFOCI_MASK, fifo_sta);
+
+	return 0;
+}
+
+static inline int
+mcp25xxfd_rx_tail_get_from_chip(const struct mcp25xxfd_priv *priv,
+				const struct mcp25xxfd_rx_ring *ring,
+				u8 *rx_tail)
+{
+	u32 fifo_ua;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_FIFOUA(ring->fifo_nr),
+			  &fifo_ua);
+	if (err)
+		return err;
+
+	fifo_ua -= ring->base - MCP25XXFD_RAM_START;
+	*rx_tail = fifo_ua / ring->obj_size;
+
+	return 0;
+}
+
+static void
+mcp25xxfd_tx_ring_init_tx_obj(const struct mcp25xxfd_priv *priv,
+			      const struct mcp25xxfd_tx_ring *ring,
+			      struct mcp25xxfd_tx_obj *tx_obj,
+			      const u8 rts_buf_len,
+			      const u8 n)
+{
+	struct spi_transfer *xfer;
+	u16 addr;
+
+	/* FIFO load */
+	addr = mcp25xxfd_get_tx_obj_addr(ring, n);
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_TX)
+		mcp25xxfd_spi_cmd_write_crc_set_addr(&tx_obj->buf.crc.cmd,
+						     addr);
+	else
+		mcp25xxfd_spi_cmd_write_nocrc(&tx_obj->buf.nocrc.cmd,
+					      addr);
+
+	xfer = &tx_obj->xfer[0];
+	xfer->tx_buf = &tx_obj->buf;
+	xfer->len = 0;	/* actual len is assigned on the fly */
+	xfer->cs_change = 1;
+	xfer->cs_change_delay.value = 0;
+	xfer->cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
+
+	/* FIFO request to send */
+	xfer = &tx_obj->xfer[1];
+	xfer->tx_buf = &ring->rts_buf;
+	xfer->len = rts_buf_len;
+
+	/* SPI message */
+	spi_message_init_with_transfers(&tx_obj->msg, tx_obj->xfer,
+					ARRAY_SIZE(tx_obj->xfer));
+}
+
+static void mcp25xxfd_ring_init(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_tx_ring *tx_ring;
+	struct mcp25xxfd_rx_ring *rx_ring, *prev_rx_ring = NULL;
+	struct mcp25xxfd_tx_obj *tx_obj;
+	u32 val;
+	u16 addr;
+	u8 len;
+	int i;
+
+	/* TEF */
+	priv->tef.head = 0;
+	priv->tef.tail = 0;
+
+	/* TX */
+	tx_ring = priv->tx;
+	tx_ring->head = 0;
+	tx_ring->tail = 0;
+	tx_ring->base = mcp25xxfd_get_tef_obj_addr(tx_ring->obj_num);
+
+	/* FIFO request to send */
+	addr = MCP25XXFD_REG_FIFOCON(MCP25XXFD_TX_FIFO);
+	val = MCP25XXFD_REG_FIFOCON_TXREQ | MCP25XXFD_REG_FIFOCON_UINC;
+	len = mcp25xxfd_cmd_prepare_write_reg(priv, &tx_ring->rts_buf,
+					      addr, val, val);
+
+	mcp25xxfd_for_each_tx_obj(tx_ring, tx_obj, i)
+		mcp25xxfd_tx_ring_init_tx_obj(priv, tx_ring, tx_obj, len, i);
+
+	/* RX */
+	mcp25xxfd_for_each_rx_ring(priv, rx_ring, i) {
+		rx_ring->head = 0;
+		rx_ring->tail = 0;
+		rx_ring->nr = i;
+		rx_ring->fifo_nr = MCP25XXFD_RX_FIFO(i);
+
+		if (!prev_rx_ring)
+			rx_ring->base =
+				mcp25xxfd_get_tx_obj_addr(tx_ring,
+							  tx_ring->obj_num);
+		else
+			rx_ring->base = prev_rx_ring->base +
+				prev_rx_ring->obj_size *
+				prev_rx_ring->obj_num;
+
+		prev_rx_ring = rx_ring;
+	}
+}
+
+static void mcp25xxfd_ring_free(struct mcp25xxfd_priv *priv)
+{
+	int i;
+
+	for (i = ARRAY_SIZE(priv->rx) - 1; i > 0; i--) {
+		kfree(priv->rx[i]);
+		priv->rx[i] = NULL;
+	}
+}
+
+static int mcp25xxfd_ring_alloc(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_tx_ring *tx_ring;
+	struct mcp25xxfd_rx_ring *rx_ring;
+	int tef_obj_size, tx_obj_size, rx_obj_size;
+	int tx_obj_num;
+	int ram_free, i;
+
+	tef_obj_size = sizeof(struct mcp25xxfd_hw_tef_obj);
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+		tx_obj_num = MCP25XXFD_TX_OBJ_NUM_CANFD;
+		tx_obj_size = sizeof(struct mcp25xxfd_hw_tx_obj_canfd);
+		rx_obj_size = sizeof(struct mcp25xxfd_hw_rx_obj_canfd);
+	} else {
+		tx_obj_num = MCP25XXFD_TX_OBJ_NUM_CAN;
+		tx_obj_size = sizeof(struct mcp25xxfd_hw_tx_obj_can);
+		rx_obj_size = sizeof(struct mcp25xxfd_hw_rx_obj_can);
+	}
+
+	tx_ring = priv->tx;
+	tx_ring->obj_num = tx_obj_num;
+	tx_ring->obj_size = tx_obj_size;
+
+	ram_free = MCP25XXFD_RAM_SIZE - tx_obj_num *
+		(tef_obj_size + tx_obj_size);
+
+	for (i = 0;
+	     i < ARRAY_SIZE(priv->rx) && ram_free >= rx_obj_size;
+	     i++) {
+		int rx_obj_num;
+
+		rx_obj_num = ram_free / rx_obj_size;
+		rx_obj_num = min(1 << (fls(rx_obj_num) - 1), 32);
+
+		rx_ring = kzalloc(sizeof(*rx_ring) + rx_obj_size * rx_obj_num,
+				  GFP_KERNEL);
+		if (!rx_ring) {
+			mcp25xxfd_ring_free(priv);
+			return -ENOMEM;
+		}
+		rx_ring->obj_num = rx_obj_num;
+		rx_ring->obj_size = rx_obj_size;
+		priv->rx[i] = rx_ring;
+
+		ram_free -= rx_ring->obj_num * rx_ring->obj_size;
+	}
+	priv->rx_ring_num = i;
+
+	netdev_dbg(priv->ndev,
+		   "FIFO setup: TEF: %d*%d bytes = %d bytes, TX: %d*%d bytes = %d bytes\n",
+		   tx_obj_num, tef_obj_size, tef_obj_size * tx_obj_num,
+		   tx_obj_num, tx_obj_size, tx_obj_size * tx_obj_num);
+
+	mcp25xxfd_for_each_rx_ring(priv, rx_ring, i) {
+		netdev_dbg(priv->ndev,
+			   "FIFO setup: RX-%d: %d*%d bytes = %d bytes\n",
+			   i, rx_ring->obj_num, rx_ring->obj_size,
+			   rx_ring->obj_size * rx_ring->obj_num);
+	}
+
+	netdev_dbg(priv->ndev,
+		   "FIFO setup: free: %d bytes\n",
+		   ram_free);
+
+	return 0;
+}
+
+static inline int
+mcp25xxfd_chip_get_mode(const struct mcp25xxfd_priv *priv, u8 *mode)
+{
+	u32 val;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_CON, &val);
+	if (err)
+		return err;
+
+	*mode = FIELD_GET(MCP25XXFD_REG_CON_OPMOD_MASK, val);
+
+	return 0;
+}
+
+static int
+__mcp25xxfd_chip_set_mode(const struct mcp25xxfd_priv *priv,
+			  const u8 mode_req, bool nowait)
+{
+	u32 con, con_reqop;
+	int err;
+
+	con_reqop = FIELD_PREP(MCP25XXFD_REG_CON_REQOP_MASK, mode_req);
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_CON,
+				 MCP25XXFD_REG_CON_REQOP_MASK, con_reqop);
+	if (err)
+		return err;
+
+	if (mode_req == MCP25XXFD_REG_CON_MODE_SLEEP || nowait)
+		return 0;
+
+	err = regmap_read_poll_timeout(priv->map_reg, MCP25XXFD_REG_CON, con,
+				       FIELD_GET(MCP25XXFD_REG_CON_OPMOD_MASK,
+						 con) == mode_req,
+				       MCP25XXFD_POLL_SLEEP_US,
+				       MCP25XXFD_POLL_TIMEOUT_US);
+	if (err) {
+		u8 mode = FIELD_GET(MCP25XXFD_REG_CON_OPMOD_MASK, con);
+
+		netdev_err(priv->ndev,
+			   "Controller failed to enter mode %s Mode (%u) and stays in %s Mode (%u).\n",
+			   mcp25xxfd_get_mode_str(mode_req), mode_req,
+			   mcp25xxfd_get_mode_str(mode), mode);
+		return err;
+	}
+
+	return 0;
+}
+
+static inline int
+mcp25xxfd_chip_set_mode(const struct mcp25xxfd_priv *priv,
+			const u8 mode_req)
+{
+	return __mcp25xxfd_chip_set_mode(priv, mode_req, false);
+}
+
+static inline int
+mcp25xxfd_chip_set_mode_nowait(const struct mcp25xxfd_priv *priv,
+			       const u8 mode_req)
+{
+	return __mcp25xxfd_chip_set_mode(priv, mode_req, true);
+}
+
+static inline bool mcp25xxfd_osc_invalid(u32 reg)
+{
+	return reg == 0x0 || reg == 0xffffffff;
+}
+
+static int mcp25xxfd_chip_clock_enable(const struct mcp25xxfd_priv *priv)
+{
+	u32 osc, osc_reference, osc_mask;
+	int err;
+
+	/* Set Power On Defaults for "Clock Output Divisor" and remove
+	 * "Oscillator Disable" bit.
+	 */
+	osc = FIELD_PREP(MCP25XXFD_REG_OSC_CLKODIV_MASK,
+			 MCP25XXFD_REG_OSC_CLKODIV_10);
+	osc_reference = MCP25XXFD_REG_OSC_OSCRDY;
+	osc_mask = MCP25XXFD_REG_OSC_OSCRDY | MCP25XXFD_REG_OSC_PLLRDY;
+
+	/* Note:
+	 *
+	 * If the controller is in Sleep Mode the following write only
+	 * removes the "Oscillator Disable" bit and powers it up. All
+	 * other bits are unaffected.
+	 */
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_OSC, osc);
+	if (err)
+		return err;
+
+	/* Wait for "Oscillator Ready" bit */
+	err = regmap_read_poll_timeout(priv->map_reg, MCP25XXFD_REG_OSC, osc,
+				       (osc & osc_mask) == osc_reference,
+				       MCP25XXFD_OSC_STAB_SLEEP_US,
+				       MCP25XXFD_OSC_STAB_TIMEOUT_US);
+	if (mcp25xxfd_osc_invalid(osc)) {
+		netdev_err(priv->ndev,
+			   "Failed to detect %s (osc=0x%08x).\n",
+			   mcp25xxfd_get_model_str(priv), osc);
+		return -ENODEV;
+	} else if (err == -ETIMEDOUT) {
+		netdev_err(priv->ndev,
+			   "Timeout waiting for Oscillator Ready (osc=0x%08x, osc_reference=0x%08x)\n",
+			   osc, osc_reference);
+		return -ETIMEDOUT;
+	} else if (err) {
+		return err;
+	}
+
+	return 0;
+}
+
+static int mcp25xxfd_chip_softreset_do(const struct mcp25xxfd_priv *priv)
+{
+	const __be16 cmd = mcp25xxfd_cmd_reset();
+	int err;
+
+	/* The Set Mode and SPI Reset command only seems to works if
+	 * the controller is not in Sleep Mode.
+	 */
+	err = mcp25xxfd_chip_clock_enable(priv);
+	if (err)
+		return err;
+
+	err = mcp25xxfd_chip_set_mode(priv, MCP25XXFD_REG_CON_MODE_CONFIG);
+	if (err)
+		return err;
+
+	/* spi_write_then_read() works with non DMA-safe buffers */
+	return spi_write_then_read(priv->spi, &cmd, sizeof(cmd), NULL, 0);
+}
+
+static int mcp25xxfd_chip_softreset_check(const struct mcp25xxfd_priv *priv)
+{
+	u32 osc, osc_reference;
+	u8 mode;
+	int err;
+
+	err = mcp25xxfd_chip_get_mode(priv, &mode);
+	if (err)
+		return err;
+
+	if (mode != MCP25XXFD_REG_CON_MODE_CONFIG) {
+		netdev_info(priv->ndev,
+			    "Controller not in Config Mode after reset, but in %s Mode (%u).\n",
+			    mcp25xxfd_get_mode_str(mode), mode);
+		return -ETIMEDOUT;
+	}
+
+	osc_reference = MCP25XXFD_REG_OSC_OSCRDY |
+		FIELD_PREP(MCP25XXFD_REG_OSC_CLKODIV_MASK,
+			   MCP25XXFD_REG_OSC_CLKODIV_10);
+
+	/* check reset defaults of OSC reg */
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_OSC, &osc);
+	if (err)
+		return err;
+
+	if (osc != osc_reference) {
+		netdev_info(priv->ndev,
+			    "Controller failed to reset. osc=0x%08x, reference value=0x%08x\n",
+			    osc, osc_reference);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int mcp25xxfd_chip_softreset(const struct mcp25xxfd_priv *priv)
+{
+	int err, i;
+
+	for (i = 0; i < MCP25XXFD_SOFTRESET_RETRIES_MAX; i++) {
+		if (i)
+			netdev_info(priv->ndev,
+				    "Retrying to reset Controller.\n");
+
+		err = mcp25xxfd_chip_softreset_do(priv);
+		if (err == -ETIMEDOUT)
+			continue;
+		if (err)
+			return err;
+
+		err = mcp25xxfd_chip_softreset_check(priv);
+		if (err == -ETIMEDOUT)
+			continue;
+		if (err)
+			return err;
+
+		return 0;
+	}
+
+	if (err)
+		return err;
+
+	return -ETIMEDOUT;
+}
+
+static int mcp25xxfd_chip_clock_init(const struct mcp25xxfd_priv *priv)
+{
+	u32 osc;
+	int err;
+
+	/* Activate Low Power Mode on Oscillator Disable. This only
+	 * works on the MCP2518FD. The MCP2517FD will go into normal
+	 * Sleep Mode instead.
+	 */
+	osc = MCP25XXFD_REG_OSC_LPMEN |
+		FIELD_PREP(MCP25XXFD_REG_OSC_CLKODIV_MASK,
+			   MCP25XXFD_REG_OSC_CLKODIV_10);
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_OSC, osc);
+	if (err)
+		return err;
+
+	/* Set Time Base Counter Prescaler to 1.
+	 *
+	 * This means an overflow of the 32 bit Time Base Counter
+	 * register at 40 MHz every 107 seconds.
+	 */
+	return regmap_write(priv->map_reg, MCP25XXFD_REG_TSCON,
+			    MCP25XXFD_REG_TSCON_TBCEN);
+}
+
+static int mcp25xxfd_set_bittiming(const struct mcp25xxfd_priv *priv)
+{
+	const struct can_bittiming *bt = &priv->can.bittiming;
+	const struct can_bittiming *dbt = &priv->can.data_bittiming;
+	u32 val = 0;
+	s8 tdco;
+	int err;
+
+	/* CAN Control Register
+	 *
+	 * - no transmit bandwidth sharing
+	 * - config mode
+	 * - disable transmit queue
+	 * - store in transmit FIFO event
+	 * - transition to restricted operation mode on system error
+	 * - ESI is transmitted recessive when ESI of message is high or
+	 *   CAN controller error passive
+	 * - restricted retransmission attempts,
+	 *   use TQXCON_TXAT and FIFOCON_TXAT
+	 * - wake-up filter bits T11FILTER
+	 * - use CAN bus line filter for wakeup
+	 * - protocol exception is treated as a form error
+	 * - Do not compare data bytes
+	 */
+	val = FIELD_PREP(MCP25XXFD_REG_CON_REQOP_MASK,
+			 MCP25XXFD_REG_CON_MODE_CONFIG) |
+		MCP25XXFD_REG_CON_STEF |
+		MCP25XXFD_REG_CON_ESIGM |
+		MCP25XXFD_REG_CON_RTXAT |
+		FIELD_PREP(MCP25XXFD_REG_CON_WFT_MASK,
+			   MCP25XXFD_REG_CON_WFT_T11FILTER) |
+		MCP25XXFD_REG_CON_WAKFIL |
+		MCP25XXFD_REG_CON_PXEDIS;
+
+	if (!(priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO))
+		val |= MCP25XXFD_REG_CON_ISOCRCEN;
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_CON, val);
+	if (err)
+		return err;
+
+	/* Nominal Bit Time */
+	val = FIELD_PREP(MCP25XXFD_REG_NBTCFG_BRP_MASK, bt->brp - 1) |
+		FIELD_PREP(MCP25XXFD_REG_NBTCFG_TSEG1_MASK,
+			   bt->prop_seg + bt->phase_seg1 - 1) |
+		FIELD_PREP(MCP25XXFD_REG_NBTCFG_TSEG2_MASK,
+			   bt->phase_seg2 - 1) |
+		FIELD_PREP(MCP25XXFD_REG_NBTCFG_SJW_MASK, bt->sjw - 1);
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_NBTCFG, val);
+	if (err)
+		return err;
+
+	if (!(priv->can.ctrlmode & CAN_CTRLMODE_FD))
+		return 0;
+
+	/* Data Bit Time */
+	val = FIELD_PREP(MCP25XXFD_REG_DBTCFG_BRP_MASK, dbt->brp - 1) |
+		FIELD_PREP(MCP25XXFD_REG_DBTCFG_TSEG1_MASK,
+			   dbt->prop_seg + dbt->phase_seg1 - 1) |
+		FIELD_PREP(MCP25XXFD_REG_DBTCFG_TSEG2_MASK,
+			   dbt->phase_seg2 - 1) |
+		FIELD_PREP(MCP25XXFD_REG_DBTCFG_SJW_MASK, dbt->sjw - 1);
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_DBTCFG, val);
+	if (err)
+		return err;
+
+	/* Transmitter Delay Compensation */
+	tdco = clamp_t(int, dbt->brp * (dbt->prop_seg + dbt->phase_seg1),
+		       -64, 63);
+	val = FIELD_PREP(MCP25XXFD_REG_TDC_TDCMOD_MASK,
+			 MCP25XXFD_REG_TDC_TDCMOD_AUTO) |
+		FIELD_PREP(MCP25XXFD_REG_TDC_TDCO_MASK, tdco);
+
+	return regmap_write(priv->map_reg, MCP25XXFD_REG_TDC, val);
+}
+
+static int mcp25xxfd_chip_rx_int_enable(const struct mcp25xxfd_priv *priv)
+{
+	u32 val;
+
+	if (!priv->rx_int)
+		return 0;
+
+	/* Configure GPIOs:
+	 * - PIN0: GPIO Input
+	 * - PIN1: GPIO Input/RX Interrupt
+	 *
+	 * PIN1 must be Input, otherwise there is a glitch on the
+	 * rx-INT line. It happens between setting the PIN as output
+	 * (in the first byte of the SPI transfer) and configuring the
+	 * PIN as interrupt (in the last byte of the SPI transfer).
+	 */
+	val = MCP25XXFD_REG_IOCON_PM0 | MCP25XXFD_REG_IOCON_TRIS1 |
+		MCP25XXFD_REG_IOCON_TRIS0;
+	return regmap_write(priv->map_reg, MCP25XXFD_REG_IOCON, val);
+}
+
+static int mcp25xxfd_chip_rx_int_disable(const struct mcp25xxfd_priv *priv)
+{
+	u32 val;
+
+	if (!priv->rx_int)
+		return 0;
+
+	/* Configure GPIOs:
+	 * - PIN0: GPIO Input
+	 * - PIN1: GPIO Input
+	 */
+	val = MCP25XXFD_REG_IOCON_PM1 | MCP25XXFD_REG_IOCON_PM0 |
+		MCP25XXFD_REG_IOCON_TRIS1 | MCP25XXFD_REG_IOCON_TRIS0;
+	return regmap_write(priv->map_reg, MCP25XXFD_REG_IOCON, val);
+}
+
+static int
+mcp25xxfd_chip_rx_fifo_init_one(const struct mcp25xxfd_priv *priv,
+				const struct mcp25xxfd_rx_ring *ring)
+{
+	u32 fifo_con;
+
+	/* Enable RXOVIE on _all_ RX FIFOs, not just the last one.
+	 *
+	 * FIFOs hit by a RX MAB overflow and RXOVIE enabled will
+	 * generate a RXOVIF, use this to properly detect RX MAB
+	 * overflows.
+	 */
+	fifo_con = FIELD_PREP(MCP25XXFD_REG_FIFOCON_FSIZE_MASK,
+			      ring->obj_num - 1) |
+		MCP25XXFD_REG_FIFOCON_RXTSEN |
+		MCP25XXFD_REG_FIFOCON_RXOVIE |
+		MCP25XXFD_REG_FIFOCON_TFNRFNIE;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+		fifo_con |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
+				       MCP25XXFD_REG_FIFOCON_PLSIZE_64);
+	else
+		fifo_con |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
+				       MCP25XXFD_REG_FIFOCON_PLSIZE_8);
+
+	return regmap_write(priv->map_reg,
+			    MCP25XXFD_REG_FIFOCON(ring->fifo_nr), fifo_con);
+}
+
+static int
+mcp25xxfd_chip_rx_filter_init_one(const struct mcp25xxfd_priv *priv,
+				  const struct mcp25xxfd_rx_ring *ring)
+{
+	u32 fltcon;
+
+	fltcon = MCP25XXFD_REG_FLTCON_FLTEN(ring->nr) |
+		MCP25XXFD_REG_FLTCON_FBP(ring->nr, ring->fifo_nr);
+
+	return regmap_update_bits(priv->map_reg,
+				  MCP25XXFD_REG_FLTCON(ring->nr >> 2),
+				  MCP25XXFD_REG_FLTCON_FLT_MASK(ring->nr),
+				  fltcon);
+}
+
+static int mcp25xxfd_chip_fifo_init(const struct mcp25xxfd_priv *priv)
+{
+	const struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	const struct mcp25xxfd_rx_ring *rx_ring;
+	u32 val;
+	int err, n;
+
+	/* TEF */
+	val = FIELD_PREP(MCP25XXFD_REG_TEFCON_FSIZE_MASK,
+			 tx_ring->obj_num - 1) |
+		MCP25XXFD_REG_TEFCON_TEFTSEN |
+		MCP25XXFD_REG_TEFCON_TEFOVIE |
+		MCP25XXFD_REG_TEFCON_TEFNEIE;
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_TEFCON, val);
+	if (err)
+		return err;
+
+	/* FIFO 1 - TX */
+	val = FIELD_PREP(MCP25XXFD_REG_FIFOCON_FSIZE_MASK,
+			 tx_ring->obj_num - 1) |
+		MCP25XXFD_REG_FIFOCON_TXEN |
+		MCP25XXFD_REG_FIFOCON_TXATIE;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+		val |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
+				  MCP25XXFD_REG_FIFOCON_PLSIZE_64);
+	else
+		val |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
+				  MCP25XXFD_REG_FIFOCON_PLSIZE_8);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		val |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_TXAT_MASK,
+				  MCP25XXFD_REG_FIFOCON_TXAT_ONE_SHOT);
+	else
+		val |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_TXAT_MASK,
+				  MCP25XXFD_REG_FIFOCON_TXAT_UNLIMITED);
+
+	err = regmap_write(priv->map_reg,
+			   MCP25XXFD_REG_FIFOCON(MCP25XXFD_TX_FIFO),
+			   val);
+	if (err)
+		return err;
+
+	/* RX FIFOs */
+	mcp25xxfd_for_each_rx_ring(priv, rx_ring, n) {
+		err = mcp25xxfd_chip_rx_fifo_init_one(priv, rx_ring);
+		if (err)
+			return err;
+
+		err = mcp25xxfd_chip_rx_filter_init_one(priv, rx_ring);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int mcp25xxfd_chip_ecc_init(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_ecc *ecc = &priv->ecc;
+	void *ram;
+	u32 val = 0;
+	int err;
+
+	ecc->ecc_stat = 0;
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_ECC)
+		val = MCP25XXFD_REG_ECCCON_ECCEN;
+
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_ECCCON,
+				 MCP25XXFD_REG_ECCCON_ECCEN, val);
+	if (err)
+		return err;
+
+	ram = kzalloc(MCP25XXFD_RAM_SIZE, GFP_KERNEL);
+	if (!ram)
+		return -ENOMEM;
+
+	err = regmap_raw_write(priv->map_reg, MCP25XXFD_RAM_START, ram,
+			       MCP25XXFD_RAM_SIZE);
+	kfree(ram);
+
+	return err;
+}
+
+static inline void mcp25xxfd_ecc_tefif_successful(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_ecc *ecc = &priv->ecc;
+
+	ecc->ecc_stat = 0;
+}
+
+static u8 mcp25xxfd_get_normal_mode(const struct mcp25xxfd_priv *priv)
+{
+	u8 mode;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+		mode = MCP25XXFD_REG_CON_MODE_MIXED;
+	else
+		mode = MCP25XXFD_REG_CON_MODE_CAN2_0;
+
+	return mode;
+}
+
+static int
+__mcp25xxfd_chip_set_normal_mode(const struct mcp25xxfd_priv *priv,
+				 bool nowait)
+{
+	u8 mode;
+
+	mode = mcp25xxfd_get_normal_mode(priv);
+
+	return __mcp25xxfd_chip_set_mode(priv, mode, nowait);
+}
+
+static inline int
+mcp25xxfd_chip_set_normal_mode(const struct mcp25xxfd_priv *priv)
+{
+	return __mcp25xxfd_chip_set_normal_mode(priv, false);
+}
+
+static inline int
+mcp25xxfd_chip_set_normal_mode_nowait(const struct mcp25xxfd_priv *priv)
+{
+	return __mcp25xxfd_chip_set_normal_mode(priv, true);
+}
+
+static int mcp25xxfd_chip_interrupts_enable(const struct mcp25xxfd_priv *priv)
+{
+	u32 val;
+	int err;
+
+	err = mcp25xxfd_chip_rx_int_enable(priv);
+	if (err)
+		return err;
+
+	val = MCP25XXFD_REG_CRC_FERRIE | MCP25XXFD_REG_CRC_CRCERRIE;
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_CRC, val);
+	if (err)
+		return err;
+
+	val = MCP25XXFD_REG_ECCCON_DEDIE | MCP25XXFD_REG_ECCCON_SECIE;
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_ECCCON, val, val);
+	if (err)
+		return err;
+
+	val = MCP25XXFD_REG_INT_CERRIE |
+		MCP25XXFD_REG_INT_SERRIE |
+		MCP25XXFD_REG_INT_RXOVIE |
+		MCP25XXFD_REG_INT_TXATIE |
+		MCP25XXFD_REG_INT_SPICRCIE |
+		MCP25XXFD_REG_INT_ECCIE |
+		MCP25XXFD_REG_INT_TEFIE |
+		MCP25XXFD_REG_INT_MODIE |
+		MCP25XXFD_REG_INT_RXIE;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+		val |= MCP25XXFD_REG_INT_IVMIE;
+
+	return regmap_write(priv->map_reg, MCP25XXFD_REG_INT, val);
+}
+
+static int mcp25xxfd_chip_interrupts_disable(const struct mcp25xxfd_priv *priv)
+{
+	int err;
+	u32 mask;
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_INT, 0);
+	if (err)
+		return err;
+
+	mask = MCP25XXFD_REG_ECCCON_DEDIE | MCP25XXFD_REG_ECCCON_SECIE;
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_ECCCON,
+				 mask, 0x0);
+	if (err)
+		return err;
+
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_CRC, 0);
+	if (err)
+		return err;
+
+	return mcp25xxfd_chip_rx_int_disable(priv);
+}
+
+static int mcp25xxfd_chip_stop(struct mcp25xxfd_priv *priv,
+			       const enum can_state state)
+{
+	priv->can.state = state;
+
+	mcp25xxfd_chip_interrupts_disable(priv);
+	return mcp25xxfd_chip_set_mode(priv, MCP25XXFD_REG_CON_MODE_SLEEP);
+}
+
+static int mcp25xxfd_chip_start(struct mcp25xxfd_priv *priv)
+{
+	int err;
+
+	err = mcp25xxfd_chip_softreset(priv);
+	if (err)
+		goto out_chip_stop;
+
+	err = mcp25xxfd_chip_clock_init(priv);
+	if (err)
+		goto out_chip_stop;
+
+	err = mcp25xxfd_set_bittiming(priv);
+	if (err)
+		goto out_chip_stop;
+
+	err = mcp25xxfd_chip_ecc_init(priv);
+	if (err)
+		goto out_chip_stop;
+
+	mcp25xxfd_ring_init(priv);
+
+	err = mcp25xxfd_chip_fifo_init(priv);
+	if (err)
+		goto out_chip_stop;
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	err = mcp25xxfd_chip_set_normal_mode(priv);
+	if (err)
+		goto out_chip_stop;
+
+	return 0;
+
+ out_chip_stop:
+	mcp25xxfd_chip_stop(priv, CAN_STATE_STOPPED);
+
+	return err;
+}
+
+static int mcp25xxfd_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+	int err;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		err = mcp25xxfd_chip_start(priv);
+		if (err)
+			return err;
+
+		err = mcp25xxfd_chip_interrupts_enable(priv);
+		if (err) {
+			mcp25xxfd_chip_stop(priv, CAN_STATE_STOPPED);
+			return err;
+		}
+
+		netif_wake_queue(ndev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int __mcp25xxfd_get_berr_counter(const struct net_device *ndev,
+					struct can_berr_counter *bec)
+{
+	const struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+	u32 trec;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_TREC, &trec);
+	if (err)
+		return err;
+
+	if (trec & MCP25XXFD_REG_TREC_TXBO)
+		bec->txerr = 256;
+	else
+		bec->txerr = FIELD_GET(MCP25XXFD_REG_TREC_TEC_MASK, trec);
+	bec->rxerr = FIELD_GET(MCP25XXFD_REG_TREC_REC_MASK, trec);
+
+	return 0;
+}
+
+static int mcp25xxfd_get_berr_counter(const struct net_device *ndev,
+				      struct can_berr_counter *bec)
+{
+	const struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+
+	/* Avoid waking up the controller if the interface is down */
+	if (!(ndev->flags & IFF_UP))
+		return 0;
+
+	/* The controller is powered down during Bus Off, use saved
+	 * bec values.
+	 */
+	if (priv->can.state == CAN_STATE_BUS_OFF) {
+		*bec = priv->bec;
+		return 0;
+	}
+
+	return __mcp25xxfd_get_berr_counter(ndev, bec);
+}
+
+static int mcp25xxfd_check_tef_tail(const struct mcp25xxfd_priv *priv)
+{
+	u8 tef_tail_chip, tef_tail;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY))
+		return 0;
+
+	err = mcp25xxfd_tef_tail_get_from_chip(priv, &tef_tail_chip);
+	if (err)
+		return err;
+
+	tef_tail = mcp25xxfd_get_tef_tail(priv);
+	if (tef_tail_chip != tef_tail) {
+		netdev_err(priv->ndev,
+			   "TEF tail of chip (0x%02x) and ours (0x%08x) inconsistent.\n",
+			   tef_tail_chip, tef_tail);
+		return -EILSEQ;
+	}
+
+	return 0;
+}
+
+static int
+mcp25xxfd_check_rx_tail(const struct mcp25xxfd_priv *priv,
+			const struct mcp25xxfd_rx_ring *ring)
+{
+	u8 rx_tail_chip, rx_tail;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY))
+		return 0;
+
+	err = mcp25xxfd_rx_tail_get_from_chip(priv, ring, &rx_tail_chip);
+	if (err)
+		return err;
+
+	rx_tail = mcp25xxfd_get_rx_tail(ring);
+	if (rx_tail_chip != rx_tail) {
+		netdev_err(priv->ndev,
+			   "RX tail of chip (%d) and ours (%d) inconsistent.\n",
+			   rx_tail_chip, rx_tail);
+		return -EILSEQ;
+	}
+
+	return 0;
+}
+
+static int
+mcp25xxfd_handle_tefif_recover(const struct mcp25xxfd_priv *priv, const u32 seq)
+{
+	const struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	u32 tef_sta;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_TEFSTA, &tef_sta);
+	if (err)
+		return err;
+
+	if (tef_sta & MCP25XXFD_REG_TEFSTA_TEFOVIF) {
+		netdev_err(priv->ndev,
+			   "Transmit Event FIFO buffer overflow.\n");
+		return -ENOBUFS;
+	}
+
+	netdev_info(priv->ndev,
+		    "Transmit Event FIFO buffer %s. (seq=0x%08x, tef_tail=0x%08x, tef_head=0x%08x, tx_head=0x%08x)\n",
+		    tef_sta & MCP25XXFD_REG_TEFSTA_TEFFIF ?
+		    "full" : tef_sta & MCP25XXFD_REG_TEFSTA_TEFNEIF ?
+		    "not empty" : "empty",
+		    seq, priv->tef.tail, priv->tef.head, tx_ring->head);
+
+	/* The Sequence Number in the TEF doesn't match our tef_tail. */
+	return -EAGAIN;
+}
+
+static int
+mcp25xxfd_handle_tefif_one(struct mcp25xxfd_priv *priv,
+			   const struct mcp25xxfd_hw_tef_obj *hw_tef_obj)
+{
+	struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	struct net_device_stats *stats = &priv->ndev->stats;
+	u32 seq, seq_masked, tef_tail_masked;
+	int err;
+
+	seq = FIELD_GET(MCP25XXFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK,
+			hw_tef_obj->flags);
+
+	/* Use the MCP2517FD mask on the MCP2518FD, too. We only
+	 * compare 7 bits, this should be enough to detect
+	 * net-yet-completed, i.e. old TEF objects.
+	 */
+	seq_masked = seq &
+		field_mask(MCP25XXFD_OBJ_FLAGS_SEQ_MCP2517FD_MASK);
+	tef_tail_masked = priv->tef.tail &
+		field_mask(MCP25XXFD_OBJ_FLAGS_SEQ_MCP2517FD_MASK);
+	if (seq_masked != tef_tail_masked)
+		return mcp25xxfd_handle_tefif_recover(priv, seq);
+
+	stats->tx_bytes +=
+		can_rx_offload_get_echo_skb(&priv->offload,
+					    mcp25xxfd_get_tef_tail(priv),
+					    hw_tef_obj->ts);
+	stats->tx_packets++;
+
+	/* finally increment the TEF pointer */
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_TEFCON,
+				 GENMASK(15, 8),
+				 MCP25XXFD_REG_TEFCON_UINC);
+	if (err)
+		return err;
+
+	priv->tef.tail++;
+	tx_ring->tail++;
+
+	return mcp25xxfd_check_tef_tail(priv);
+}
+
+static int mcp25xxfd_tef_ring_update(struct mcp25xxfd_priv *priv)
+{
+	const struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	unsigned int new_head;
+	u8 chip_tx_tail;
+	int err;
+
+	err = mcp25xxfd_tx_tail_get_from_chip(priv, &chip_tx_tail);
+	if (err)
+		return err;
+
+	/* chip_tx_tail, is the next TX-Object send by the HW.
+	 * The new TEF head must be >= the old head, ...
+	 */
+	new_head = round_down(priv->tef.head, tx_ring->obj_num) + chip_tx_tail;
+	if (new_head <= priv->tef.head)
+		new_head += tx_ring->obj_num;
+
+	/* ... but it cannot exceed the TX head. */
+	priv->tef.head = min(new_head, tx_ring->head);
+
+	return mcp25xxfd_check_tef_tail(priv);
+}
+
+static inline int
+mcp25xxfd_tef_obj_read(const struct mcp25xxfd_priv *priv,
+		       struct mcp25xxfd_hw_tef_obj *hw_tef_obj,
+		       const u8 offset, const u8 len)
+{
+	const struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+
+	if (IS_ENABLED(CONFIG_CAN_MCP25XXFD_SANITY) &&
+	    (offset > tx_ring->obj_num ||
+	     len > tx_ring->obj_num ||
+	     offset + len > tx_ring->obj_num)) {
+		netdev_err(priv->ndev,
+			   "Trying to read to many TEF objects (max=%d, offset=%d, len=%d).\n",
+			   tx_ring->obj_num, offset, len);
+		return -ERANGE;
+	}
+
+	return regmap_bulk_read(priv->map_rx,
+				mcp25xxfd_get_tef_obj_addr(offset),
+				hw_tef_obj,
+				sizeof(*hw_tef_obj) / sizeof(u32) * len);
+}
+
+static int mcp25xxfd_handle_tefif(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_hw_tef_obj hw_tef_obj[MCP25XXFD_TX_OBJ_NUM_MAX];
+	u8 tef_tail, len, l;
+	int err, i;
+
+	err = mcp25xxfd_tef_ring_update(priv);
+	if (err)
+		return err;
+
+	tef_tail = mcp25xxfd_get_tef_tail(priv);
+	len = mcp25xxfd_get_tef_len(priv);
+	l = mcp25xxfd_get_tef_linear_len(priv);
+	err = mcp25xxfd_tef_obj_read(priv, hw_tef_obj, tef_tail, l);
+	if (err)
+		return err;
+
+	if (l < len) {
+		err = mcp25xxfd_tef_obj_read(priv, &hw_tef_obj[l], 0, len - l);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < len; i++) {
+		err = mcp25xxfd_handle_tefif_one(priv, &hw_tef_obj[i]);
+		/* -EAGAIN means the Sequence Number in the TEF
+		 * doesn't match our tef_tail. This can happen if we
+		 * read the TEF objects too early. Leave loop let the
+		 * interrupt handler call us again.
+		 */
+		if (err == -EAGAIN)
+			goto out_netif_wake_queue;
+		if (err)
+			return err;
+	}
+
+ out_netif_wake_queue:
+	mcp25xxfd_ecc_tefif_successful(priv);
+
+	if (mcp25xxfd_get_tx_free(priv->tx)) {
+		smp_mb();
+		netif_wake_queue(priv->ndev);
+	}
+
+	return 0;
+}
+
+static int
+mcp25xxfd_rx_ring_update(const struct mcp25xxfd_priv *priv,
+			 struct mcp25xxfd_rx_ring *ring)
+{
+	u32 new_head;
+	u8 chip_rx_head;
+	int err;
+
+	err = mcp25xxfd_rx_head_get_from_chip(priv, ring, &chip_rx_head);
+	if (err)
+		return err;
+
+	/* chip_rx_head, is the next RX-Object filled by the HW.
+	 * The new RX head must be >= the old head.
+	 */
+	new_head = round_down(ring->head, ring->obj_num) + chip_rx_head;
+	if (new_head <= ring->head)
+		new_head += ring->obj_num;
+
+	ring->head = new_head;
+
+	return mcp25xxfd_check_rx_tail(priv, ring);
+}
+
+static void
+mcp25xxfd_hw_rx_obj_to_skb(const struct mcp25xxfd_priv *priv,
+			   const struct mcp25xxfd_hw_rx_obj_canfd *hw_rx_obj,
+			   struct sk_buff *skb)
+{
+	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+
+	if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_IDE) {
+		u32 sid, eid;
+
+		eid = FIELD_GET(MCP25XXFD_OBJ_ID_EID_MASK, hw_rx_obj->id);
+		sid = FIELD_GET(MCP25XXFD_OBJ_ID_SID_MASK, hw_rx_obj->id);
+
+		cfd->can_id = CAN_EFF_FLAG |
+			FIELD_PREP(MCP25XXFD_REG_FRAME_EFF_EID_MASK, eid) |
+			FIELD_PREP(MCP25XXFD_REG_FRAME_EFF_SID_MASK, sid);
+	} else {
+		cfd->can_id = FIELD_GET(MCP25XXFD_OBJ_ID_SID_MASK,
+					hw_rx_obj->id);
+	}
+
+	/* CANFD */
+	if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_FDF) {
+		u8 dlc;
+
+		if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_ESI)
+			cfd->flags |= CANFD_ESI;
+
+		if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_BRS)
+			cfd->flags |= CANFD_BRS;
+
+		dlc = FIELD_GET(MCP25XXFD_OBJ_FLAGS_DLC, hw_rx_obj->flags);
+		cfd->len = can_dlc2len(get_canfd_dlc(dlc));
+	} else {
+		if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_RTR)
+			cfd->can_id |= CAN_RTR_FLAG;
+
+		cfd->len = get_can_dlc(FIELD_GET(MCP25XXFD_OBJ_FLAGS_DLC,
+						 hw_rx_obj->flags));
+	}
+
+	memcpy(cfd->data, hw_rx_obj->data, cfd->len);
+}
+
+static int
+mcp25xxfd_handle_rxif_one(struct mcp25xxfd_priv *priv,
+			  struct mcp25xxfd_rx_ring *ring,
+			  const struct mcp25xxfd_hw_rx_obj_canfd *hw_rx_obj)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct sk_buff *skb;
+	struct canfd_frame *cfd;
+	int err;
+
+	if (hw_rx_obj->flags & MCP25XXFD_OBJ_FLAGS_FDF)
+		skb = alloc_canfd_skb(priv->ndev, &cfd);
+	else
+		skb = alloc_can_skb(priv->ndev, (struct can_frame **)&cfd);
+
+	if (!cfd) {
+		stats->rx_dropped++;
+		return 0;
+	}
+
+	mcp25xxfd_hw_rx_obj_to_skb(priv, hw_rx_obj, skb);
+	err = can_rx_offload_queue_sorted(&priv->offload, skb, hw_rx_obj->ts);
+	if (err)
+		stats->rx_fifo_errors++;
+
+	ring->tail++;
+
+	/* finally increment the RX pointer */
+	return regmap_update_bits(priv->map_reg,
+				  MCP25XXFD_REG_FIFOCON(ring->fifo_nr),
+				  GENMASK(15, 8),
+				  MCP25XXFD_REG_FIFOCON_UINC);
+}
+
+static inline int
+mcp25xxfd_rx_obj_read(const struct mcp25xxfd_priv *priv,
+		      const struct mcp25xxfd_rx_ring *ring,
+		      struct mcp25xxfd_hw_rx_obj_canfd *hw_rx_obj,
+		      const u8 offset, const u8 len)
+{
+	int err;
+
+	err = regmap_bulk_read(priv->map_rx,
+			       mcp25xxfd_get_rx_obj_addr(ring, offset),
+			       hw_rx_obj,
+			       len * ring->obj_size / sizeof(u32));
+
+	return err;
+}
+
+static int
+mcp25xxfd_handle_rxif_ring(struct mcp25xxfd_priv *priv,
+			   struct mcp25xxfd_rx_ring *ring)
+{
+	struct mcp25xxfd_hw_rx_obj_canfd *hw_rx_obj = ring->obj;
+	u8 rx_tail, len;
+	int err, i;
+
+	err = mcp25xxfd_rx_ring_update(priv, ring);
+	if (err)
+		return err;
+
+	while ((len = mcp25xxfd_get_rx_linear_len(ring))) {
+		rx_tail = mcp25xxfd_get_rx_tail(ring);
+
+		err = mcp25xxfd_rx_obj_read(priv, ring, hw_rx_obj,
+					    rx_tail, len);
+		if (err)
+			return err;
+
+		for (i = 0; i < len; i++) {
+			err = mcp25xxfd_handle_rxif_one(priv, ring,
+							(void *)hw_rx_obj +
+							i * ring->obj_size);
+			if (err)
+				return err;
+		}
+	}
+
+	return 0;
+}
+
+static int mcp25xxfd_handle_rxif(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_rx_ring *ring;
+	int err, n;
+
+	mcp25xxfd_for_each_rx_ring(priv, ring, n) {
+		err = mcp25xxfd_handle_rxif_ring(priv, ring);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static inline int mcp25xxfd_get_timestamp(const struct mcp25xxfd_priv *priv,
+					  u32 *timestamp)
+{
+	return regmap_read(priv->map_reg, MCP25XXFD_REG_TBC, timestamp);
+}
+
+static struct sk_buff *
+mcp25xxfd_alloc_can_err_skb(const struct mcp25xxfd_priv *priv,
+			    struct can_frame **cf, u32 *timestamp)
+{
+	int err;
+
+	err = mcp25xxfd_get_timestamp(priv, timestamp);
+	if (err)
+		return NULL;
+
+	return alloc_can_err_skb(priv->ndev, cf);
+}
+
+static int mcp25xxfd_handle_rxovif(struct mcp25xxfd_priv *priv)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct mcp25xxfd_rx_ring *ring;
+	struct sk_buff *skb;
+	struct can_frame *cf;
+	u32 timestamp, rxovif;
+	int err, i;
+
+	stats->rx_over_errors++;
+	stats->rx_errors++;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_RXOVIF, &rxovif);
+	if (err)
+		return err;
+
+	mcp25xxfd_for_each_rx_ring(priv, ring, i) {
+		if (!(rxovif & BIT(ring->fifo_nr)))
+			continue;
+
+		/* If SERRIF is active, there was a RX MAB overflow. */
+		if (priv->regs_status.intf & MCP25XXFD_REG_INT_SERRIF) {
+			netdev_info(priv->ndev,
+				    "RX-%d: MAB overflow detected.\n",
+				    ring->nr);
+		} else {
+			netdev_info(priv->ndev,
+				    "RX-%d: FIFO overflow.\n", ring->nr);
+		}
+
+		err = regmap_update_bits(priv->map_reg,
+					 MCP25XXFD_REG_FIFOSTA(ring->fifo_nr),
+					 MCP25XXFD_REG_FIFOSTA_RXOVIF,
+					 0x0);
+		if (err)
+			return err;
+	}
+
+	skb = mcp25xxfd_alloc_can_err_skb(priv, &cf, &timestamp);
+	if (!skb)
+		return 0;
+
+	cf->can_id |= CAN_ERR_CRTL;
+	cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+	err = can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
+	if (err)
+		stats->rx_fifo_errors++;
+
+	return 0;
+}
+
+static int mcp25xxfd_handle_txatif(struct mcp25xxfd_priv *priv)
+{
+	netdev_info(priv->ndev, "%s\n", __func__);
+
+	return 0;
+}
+
+static int mcp25xxfd_handle_ivmif(struct mcp25xxfd_priv *priv)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	u32 bdiag1, timestamp;
+	struct sk_buff *skb;
+	struct can_frame *cf = NULL;
+	int err;
+
+	err = mcp25xxfd_get_timestamp(priv, &timestamp);
+	if (err)
+		return err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_BDIAG1, &bdiag1);
+	if (err)
+		return err;
+
+	/* Write 0s to clear error bits, don't write 1s to non active
+	 * bits, as they will be set.
+	 */
+	err = regmap_write(priv->map_reg, MCP25XXFD_REG_BDIAG1, 0x0);
+	if (err)
+		return err;
+
+	priv->can.can_stats.bus_error++;
+
+	skb = alloc_can_err_skb(priv->ndev, &cf);
+	if (cf)
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+	/* Controller misconfiguration */
+	if (WARN_ON(bdiag1 & MCP25XXFD_REG_BDIAG1_DLCMM))
+		netdev_err(priv->ndev,
+			   "recv'd DLC is larger than PLSIZE of FIFO element.");
+
+	/* RX errors */
+	if (bdiag1 & (MCP25XXFD_REG_BDIAG1_DCRCERR |
+		      MCP25XXFD_REG_BDIAG1_NCRCERR)) {
+		netdev_dbg(priv->ndev, "CRC error\n");
+
+		stats->rx_errors++;
+		if (cf)
+			cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+	}
+	if (bdiag1 & (MCP25XXFD_REG_BDIAG1_DSTUFERR |
+		      MCP25XXFD_REG_BDIAG1_NSTUFERR)) {
+		netdev_dbg(priv->ndev, "Stuff error\n");
+
+		stats->rx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+	}
+	if (bdiag1 & (MCP25XXFD_REG_BDIAG1_DFORMERR |
+		      MCP25XXFD_REG_BDIAG1_NFORMERR)) {
+		netdev_dbg(priv->ndev, "Format error\n");
+
+		stats->rx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+	}
+
+	/* TX errors */
+	if (bdiag1 & MCP25XXFD_REG_BDIAG1_NACKERR) {
+		netdev_dbg(priv->ndev, "NACK error\n");
+
+		stats->tx_errors++;
+		if (cf) {
+			cf->can_id |= CAN_ERR_ACK;
+			cf->data[2] |= CAN_ERR_PROT_TX;
+		}
+	}
+	if (bdiag1 & (MCP25XXFD_REG_BDIAG1_DBIT1ERR |
+		      MCP25XXFD_REG_BDIAG1_NBIT1ERR)) {
+		netdev_dbg(priv->ndev, "Bit1 error\n");
+
+		stats->tx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_TX | CAN_ERR_PROT_BIT1;
+	}
+	if (bdiag1 & (MCP25XXFD_REG_BDIAG1_DBIT0ERR |
+		      MCP25XXFD_REG_BDIAG1_NBIT0ERR)) {
+		netdev_dbg(priv->ndev, "Bit0 error\n");
+
+		stats->tx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_TX | CAN_ERR_PROT_BIT0;
+	}
+
+	if (!cf)
+		return 0;
+
+	err = can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
+	if (err)
+		stats->rx_fifo_errors++;
+
+	return 0;
+}
+
+static int mcp25xxfd_handle_cerrif(struct mcp25xxfd_priv *priv)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct sk_buff *skb;
+	struct can_frame *cf = NULL;
+	enum can_state new_state, rx_state, tx_state;
+	u32 trec, timestamp;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_TREC, &trec);
+	if (err)
+		return err;
+
+	if (trec & MCP25XXFD_REG_TREC_TXBO)
+		tx_state = CAN_STATE_BUS_OFF;
+	else if (trec & MCP25XXFD_REG_TREC_TXBP)
+		tx_state = CAN_STATE_ERROR_PASSIVE;
+	else if (trec & MCP25XXFD_REG_TREC_TXWARN)
+		tx_state = CAN_STATE_ERROR_WARNING;
+	else
+		tx_state = CAN_STATE_ERROR_ACTIVE;
+
+	if (trec & MCP25XXFD_REG_TREC_RXBP)
+		rx_state = CAN_STATE_ERROR_PASSIVE;
+	else if (trec & MCP25XXFD_REG_TREC_RXWARN)
+		rx_state = CAN_STATE_ERROR_WARNING;
+	else
+		rx_state = CAN_STATE_ERROR_ACTIVE;
+
+	new_state = max(tx_state, rx_state);
+	if (new_state == priv->can.state)
+		return 0;
+
+	/* The skb allocation might fail, but can_change_state()
+	 * handles cf == NULL.
+	 */
+	skb = mcp25xxfd_alloc_can_err_skb(priv, &cf, &timestamp);
+	can_change_state(priv->ndev, cf, tx_state, rx_state);
+
+	if (new_state == CAN_STATE_BUS_OFF) {
+		/* As we're going to switch off the chip now, let's
+		 * save the error counters and return them to
+		 * userspace, if do_get_berr_counter() is called while
+		 * the chip is in Bus Off.
+		 */
+		err = __mcp25xxfd_get_berr_counter(priv->ndev, &priv->bec);
+		if (err)
+			return err;
+
+		mcp25xxfd_chip_stop(priv, CAN_STATE_BUS_OFF);
+		can_bus_off(priv->ndev);
+	}
+
+	if (!skb)
+		return 0;
+
+	if (new_state != CAN_STATE_BUS_OFF) {
+		struct can_berr_counter bec;
+
+		err = mcp25xxfd_get_berr_counter(priv->ndev, &bec);
+		if (err)
+			return err;
+		cf->data[6] = bec.txerr;
+		cf->data[7] = bec.rxerr;
+	}
+
+	err = can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
+	if (err)
+		stats->rx_fifo_errors++;
+
+	return 0;
+}
+
+static int
+mcp25xxfd_handle_modif(const struct mcp25xxfd_priv *priv, bool *set_normal_mode)
+{
+	const u8 mode_reference = mcp25xxfd_get_normal_mode(priv);
+	u8 mode;
+	int err;
+
+	err = mcp25xxfd_chip_get_mode(priv, &mode);
+	if (err)
+		return err;
+
+	if (mode == mode_reference) {
+		netdev_dbg(priv->ndev,
+			   "Controller changed into %s Mode (%u).\n",
+			   mcp25xxfd_get_mode_str(mode), mode);
+		return 0;
+	}
+
+	/* According to MCP2517FD errata DS80000792B 1., during a TX
+	 * MAB underflow, the controller will transition to Restricted
+	 * Operation Mode or Listen Only Mode (depending on SERR2LOM).
+	 *
+	 * However this is not always the case. If SERR2LOM is
+	 * configured for Restricted Operation Mode (SERR2LOM not set)
+	 * the MCP2517FD will sometimes transition to Listen Only Mode
+	 * first. When polling this bit we see that it will transition
+	 * to Restricted Operation Mode shortly after.
+	 */
+	if ((priv->devtype_data.quirks & MCP25XXFD_QUIRK_MAB_NO_WARN) &&
+	    (mode == MCP25XXFD_REG_CON_MODE_RESTRICTED ||
+	     mode == MCP25XXFD_REG_CON_MODE_LISTENONLY))
+		netdev_dbg(priv->ndev,
+			   "Controller changed into %s Mode (%u).\n",
+			   mcp25xxfd_get_mode_str(mode), mode);
+	else
+		netdev_err(priv->ndev,
+			   "Controller changed into %s Mode (%u).\n",
+			   mcp25xxfd_get_mode_str(mode), mode);
+
+	/* After the application requests Normal mode, the Controller
+	 * will automatically attempt to retransmit the message that
+	 * caused the TX MAB underflow.
+	 *
+	 * However, if there is an ECC error in the TX-RAM, we first
+	 * have to reload the tx-object before requesting Normal
+	 * mode. This is done later in mcp25xxfd_handle_eccif().
+	 */
+	if (priv->regs_status.intf & MCP25XXFD_REG_INT_ECCIF) {
+		*set_normal_mode = true;
+		return 0;
+	}
+
+	return mcp25xxfd_chip_set_normal_mode_nowait(priv);
+}
+
+static int mcp25xxfd_handle_serrif(struct mcp25xxfd_priv *priv)
+{
+	struct mcp25xxfd_ecc *ecc = &priv->ecc;
+	struct net_device_stats *stats = &priv->ndev->stats;
+	bool handled = false;
+
+	/* TX MAB underflow
+	 *
+	 * According to MCP2517FD Errata DS80000792B 1. a TX MAB
+	 * underflow is indicated by SERRIF and MODIF.
+	 *
+	 * In addition to the effects mentioned in the Errata, there
+	 * are Bus Errors due to the aborted CAN frame, so a IVMIF
+	 * will be seen as well.
+	 *
+	 * Sometimes there is an ECC error in the TX-RAM, which leads
+	 * to a TX MAB underflow.
+	 *
+	 * However, probably due to a race condition, there is no
+	 * associated MODIF pending.
+	 *
+	 * Further, there are situations, where the SERRIF is caused
+	 * by an ECC error in the TX-RAM, but not even the ECCIF is
+	 * set. This only seems to happen _after_ the first occurrence
+	 * of a ECCIF (which is tracked in ecc->cnt).
+	 *
+	 * Treat all as a known system errors..
+	 */
+	if ((priv->regs_status.intf & MCP25XXFD_REG_INT_MODIF &&
+	     priv->regs_status.intf & MCP25XXFD_REG_INT_IVMIF) ||
+	    priv->regs_status.intf & MCP25XXFD_REG_INT_ECCIF ||
+	    ecc->cnt) {
+		const char *msg;
+
+		if (priv->regs_status.intf & MCP25XXFD_REG_INT_ECCIF ||
+		    ecc->cnt)
+			msg = "TX MAB underflow due to ECC error detected.";
+		else
+			msg = "TX MAB underflow detected.";
+
+		if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_MAB_NO_WARN)
+			netdev_dbg(priv->ndev, "%s\n", msg);
+		else
+			netdev_info(priv->ndev, "%s\n", msg);
+
+		stats->tx_aborted_errors++;
+		stats->tx_errors++;
+		handled = true;
+	}
+
+	/* RX MAB overflow
+	 *
+	 * According to MCP2517FD Errata DS80000792B 1. a RX MAB
+	 * overflow is indicated by SERRIF.
+	 *
+	 * In addition to the effects mentioned in the Errata, (most
+	 * of the times) a RXOVIF is raised, if the FIFO that is being
+	 * received into has the RXOVIE activated (and we have enabled
+	 * RXOVIE on all FIFOs).
+	 *
+	 * Sometimes there is no RXOVIF just a RXIF is pending.
+	 *
+	 * Treat all as a known system errors..
+	 */
+	if (priv->regs_status.intf & MCP25XXFD_REG_INT_RXOVIF ||
+	    priv->regs_status.intf & MCP25XXFD_REG_INT_RXIF) {
+		stats->rx_dropped++;
+		handled = true;
+	}
+
+	if (!handled)
+		netdev_err(priv->ndev,
+			   "Unhandled System Error Interrupt (intf=0x%08x)!\n",
+			   priv->regs_status.intf);
+
+	return 0;
+}
+
+static int
+mcp25xxfd_handle_eccif_recover(struct mcp25xxfd_priv *priv, u8 nr)
+{
+	struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	struct mcp25xxfd_ecc *ecc = &priv->ecc;
+	struct mcp25xxfd_tx_obj *tx_obj;
+	u8 chip_tx_tail, tx_tail, offset;
+	u16 addr;
+	int err;
+
+	addr = FIELD_GET(MCP25XXFD_REG_ECCSTAT_ERRADDR_MASK, ecc->ecc_stat);
+
+	err = mcp25xxfd_tx_tail_get_from_chip(priv, &chip_tx_tail);
+	if (err)
+		return err;
+
+	tx_tail = mcp25xxfd_get_tx_tail(tx_ring);
+	offset = (nr - chip_tx_tail) & (tx_ring->obj_num - 1);
+
+	/* Bail out if one of the following is met:
+	 * - tx_tail information is inconsistent
+	 * - for mcp2517fd: offset not 0
+	 * - for mcp2518fd: offset not 0 or 1
+	 */
+	if (chip_tx_tail != tx_tail ||
+	    !(offset == 0 || (offset == 1 && mcp25xxfd_is_2518(priv)))) {
+		netdev_err(priv->ndev,
+			   "ECC Error information inconsistent (addr=0x%04x, nr=%d, tx_tail=0x%08x(%d), chip_tx_tail=%d, offset=%d).\n",
+			   addr, nr, tx_ring->tail, tx_tail, chip_tx_tail,
+			   offset);
+		return -EINVAL;
+	}
+
+	netdev_info(priv->ndev,
+		    "Recovering %s ECC Error at address 0x%04x (in TX-RAM, tx_obj=%d, tx_tail=0x%08x(%d), offset=%d).\n",
+		    ecc->ecc_stat & MCP25XXFD_REG_ECCSTAT_SECIF ?
+		    "Single" : "Double",
+		    addr, nr, tx_ring->tail, tx_tail, offset);
+
+	/* reload tx_obj into controller RAM ... */
+	tx_obj = &tx_ring->obj[nr];
+	err = spi_sync_transfer(priv->spi, tx_obj->xfer, 1);
+	if (err)
+		return err;
+
+	/* ... and trigger retransmit */
+	return mcp25xxfd_chip_set_normal_mode(priv);
+}
+
+static int
+mcp25xxfd_handle_eccif(struct mcp25xxfd_priv *priv, bool set_normal_mode)
+{
+	struct mcp25xxfd_ecc *ecc = &priv->ecc;
+	const char *msg;
+	bool in_tx_ram;
+	u32 ecc_stat;
+	u16 addr;
+	u8 nr;
+	int err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_ECCSTAT, &ecc_stat);
+	if (err)
+		return err;
+
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_ECCSTAT,
+				 MCP25XXFD_REG_ECCSTAT_IF_MASK, ~ecc_stat);
+	if (err)
+		return err;
+
+	/* Check if ECC error occurred in TX-RAM */
+	addr = FIELD_GET(MCP25XXFD_REG_ECCSTAT_ERRADDR_MASK, ecc_stat);
+	err = mcp25xxfd_get_tx_nr_by_addr(priv->tx, &nr, addr);
+	if (!err)
+		in_tx_ram = true;
+	else if (err == -ENOENT)
+		in_tx_ram = false;
+	else
+		return err;
+
+	if (ecc_stat & MCP25XXFD_REG_ECCSTAT_SECIF)
+		msg = "Single ECC Error corrected at address";
+	else if (ecc_stat & MCP25XXFD_REG_ECCSTAT_DEDIF)
+		msg = "Double ECC Error detected at address";
+	else
+		return -EINVAL;
+
+	if (!in_tx_ram) {
+		ecc->ecc_stat = 0;
+
+		if (ecc_stat & MCP25XXFD_REG_ECCSTAT_SECIF)
+			netdev_info(priv->ndev, "%s 0x%04x.\n",
+				    msg, addr);
+		else
+			netdev_notice(priv->ndev, "%s 0x%04x.\n",
+				      msg, addr);
+	} else {
+		/* Re-occurring error? */
+		if (ecc->ecc_stat == ecc_stat) {
+			ecc->cnt++;
+		} else {
+			ecc->ecc_stat = ecc_stat;
+			ecc->cnt = 1;
+		}
+
+		netdev_info(priv->ndev,
+			    "%s 0x%04x (in TX-RAM, tx_obj=%d), occurred %d time%s.\n",
+			    msg, addr, nr, ecc->cnt, ecc->cnt > 1 ? "s" : "");
+
+		if (ecc->cnt >= MCP25XXFD_ECC_CNT_MAX)
+			return mcp25xxfd_handle_eccif_recover(priv, nr);
+	}
+
+	if (set_normal_mode)
+		return mcp25xxfd_chip_set_normal_mode_nowait(priv);
+
+	return 0;
+}
+
+static int mcp25xxfd_handle_spicrcif(struct mcp25xxfd_priv *priv)
+{
+	int err;
+	u32 crc;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_CRC, &crc);
+	if (err)
+		return err;
+
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_CRC,
+				 MCP25XXFD_REG_CRC_IF_MASK,
+				 ~crc);
+	if (err)
+		return err;
+
+	if (crc & MCP25XXFD_REG_CRC_FERRIF)
+		netdev_notice(priv->ndev, "CRC write command format error.\n");
+	else if (crc & MCP25XXFD_REG_CRC_CRCERRIF)
+		netdev_notice(priv->ndev,
+			      "CRC write error detected. CRC=0x%04lx.\n",
+			      FIELD_GET(MCP25XXFD_REG_CRC_MASK, crc));
+
+	return 0;
+}
+
+#define mcp25xxfd_handle(priv, irq, ...) \
+({ \
+	struct mcp25xxfd_priv *_priv = (priv); \
+	int err; \
+\
+	err = mcp25xxfd_handle_##irq(_priv, ## __VA_ARGS__); \
+	if (err) \
+		netdev_err(_priv->ndev, \
+			"IRQ handler mcp25xxfd_handle_%s() returned %d.\n", \
+			__stringify(irq), err); \
+	err; \
+})
+
+static irqreturn_t mcp25xxfd_irq(int irq, void *dev_id)
+{
+	struct mcp25xxfd_priv *priv = dev_id;
+	irqreturn_t handled = IRQ_NONE;
+	int err;
+
+	if (priv->rx_int)
+		do {
+			int rx_pending;
+
+			rx_pending = gpiod_get_value_cansleep(priv->rx_int);
+			if (!rx_pending)
+				break;
+
+			err = mcp25xxfd_handle(priv, rxif);
+			if (err)
+				goto out_fail;
+
+			handled = IRQ_HANDLED;
+		} while (1);
+
+	do {
+		u32 intf_pending, intf_pending_clearable;
+		bool set_normal_mode;
+
+		err = regmap_bulk_read(priv->map_reg, MCP25XXFD_REG_INT,
+				       &priv->regs_status,
+				       sizeof(priv->regs_status) /
+				       sizeof(u32));
+		if (err)
+			goto out_fail;
+
+		intf_pending = FIELD_GET(MCP25XXFD_REG_INT_IF_MASK,
+					 priv->regs_status.intf) &
+			FIELD_GET(MCP25XXFD_REG_INT_IE_MASK,
+				  priv->regs_status.intf);
+
+		if (!(intf_pending))
+			return handled;
+
+		/* Some interrupts must be ACKed in the
+		 * MCP25XXFD_REG_INT register.
+		 * - First ACK then handle, to avoid lost-IRQ race
+		 *   condition on fast re-occurring interrupts.
+		 * - Write "0" to clear active IRQs, "1" to all other,
+		 *   to avoid r/m/w race condition on the
+		 *   MCP25XXFD_REG_INT register.
+		 */
+		intf_pending_clearable = intf_pending &
+			MCP25XXFD_REG_INT_IF_CLEARABLE_MASK;
+		if (intf_pending_clearable) {
+			err = regmap_update_bits(priv->map_reg,
+						 MCP25XXFD_REG_INT,
+						 MCP25XXFD_REG_INT_IF_MASK,
+						 ~intf_pending_clearable);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_MODIF) {
+			err = mcp25xxfd_handle(priv, modif, &set_normal_mode);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_RXIF) {
+			err = mcp25xxfd_handle(priv, rxif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_TEFIF) {
+			err = mcp25xxfd_handle(priv, tefif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_RXOVIF) {
+			err = mcp25xxfd_handle(priv, rxovif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_TXATIF) {
+			err = mcp25xxfd_handle(priv, txatif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_IVMIF) {
+			err = mcp25xxfd_handle(priv, ivmif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_SERRIF) {
+			err = mcp25xxfd_handle(priv, serrif);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_ECCIF) {
+			err = mcp25xxfd_handle(priv, eccif, set_normal_mode);
+			if (err)
+				goto out_fail;
+		}
+
+		if (intf_pending & MCP25XXFD_REG_INT_SPICRCIF) {
+			err = mcp25xxfd_handle(priv, spicrcif);
+			if (err)
+				goto out_fail;
+		}
+
+		/* On the MCP2527FD and MCP2518FD, we don't get a
+		 * CERRIF IRQ on the transition TX ERROR_WARNING -> TX
+		 * ERROR_ACTIVE.
+		 */
+		if (intf_pending & MCP25XXFD_REG_INT_CERRIF ||
+		    priv->can.state > CAN_STATE_ERROR_ACTIVE) {
+			err = mcp25xxfd_handle(priv, cerrif);
+			if (err)
+				goto out_fail;
+
+			/* In Bus Off we completely shut down the
+			 * controller. Every subsequent register read
+			 * will read bogus data, and if
+			 * MCP25XXFD_QUIRK_CRC_REG is enabled the CRC
+			 * check will fail, too. So leave IRQ handler
+			 * directly.
+			 */
+			if (priv->can.state == CAN_STATE_BUS_OFF)
+				return IRQ_HANDLED;
+		}
+
+		handled = IRQ_HANDLED;
+	} while (1);
+
+ out_fail:
+	netdev_err(priv->ndev, "IRQ handler returned %d (intf=0x%08x).\n",
+		   err, priv->regs_status.intf);
+	mcp25xxfd_chip_interrupts_disable(priv);
+
+	return handled;
+}
+
+static inline struct
+mcp25xxfd_tx_obj *mcp25xxfd_get_tx_obj_next(struct mcp25xxfd_tx_ring *tx_ring)
+{
+	u8 tx_head;
+
+	tx_head = mcp25xxfd_get_tx_head(tx_ring);
+
+	return &tx_ring->obj[tx_head];
+}
+
+static void
+mcp25xxfd_tx_obj_from_skb(const struct mcp25xxfd_priv *priv,
+			  struct mcp25xxfd_tx_obj *tx_obj,
+			  const struct sk_buff *skb,
+			  unsigned int seq)
+{
+	const struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+	struct mcp25xxfd_hw_tx_obj_raw *hw_tx_obj;
+	union mcp25xxfd_tx_obj_load_buf *load_buf;
+	u8 dlc;
+	u32 id, flags;
+	int offset, len;
+
+	if (cfd->can_id & CAN_EFF_FLAG) {
+		u32 sid, eid;
+
+		sid = FIELD_GET(MCP25XXFD_REG_FRAME_EFF_SID_MASK, cfd->can_id);
+		eid = FIELD_GET(MCP25XXFD_REG_FRAME_EFF_EID_MASK, cfd->can_id);
+
+		id = FIELD_PREP(MCP25XXFD_OBJ_ID_EID_MASK, eid) |
+			FIELD_PREP(MCP25XXFD_OBJ_ID_SID_MASK, sid);
+
+		flags = MCP25XXFD_OBJ_FLAGS_IDE;
+	} else {
+		id = FIELD_PREP(MCP25XXFD_OBJ_ID_SID_MASK, cfd->can_id);
+		flags = 0;
+	}
+
+	/* Use the MCP2518FD mask even on the MCP2517FD. It doesn't
+	 * harm, only the lower 7 bits will be transferred into the
+	 * TEF object.
+	 */
+	dlc = can_len2dlc(cfd->len);
+	flags |= FIELD_PREP(MCP25XXFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK, seq) |
+		FIELD_PREP(MCP25XXFD_OBJ_FLAGS_DLC, dlc);
+
+	if (cfd->can_id & CAN_RTR_FLAG)
+		flags |= MCP25XXFD_OBJ_FLAGS_RTR;
+
+	/* CANFD */
+	if (can_is_canfd_skb(skb)) {
+		if (cfd->flags & CANFD_ESI)
+			flags |= MCP25XXFD_OBJ_FLAGS_ESI;
+
+		flags |= MCP25XXFD_OBJ_FLAGS_FDF;
+
+		if (cfd->flags & CANFD_BRS)
+			flags |= MCP25XXFD_OBJ_FLAGS_BRS;
+	}
+
+	load_buf = &tx_obj->buf;
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_TX)
+		hw_tx_obj = &load_buf->crc.hw_tx_obj;
+	else
+		hw_tx_obj = &load_buf->nocrc.hw_tx_obj;
+
+	put_unaligned_le32(id, &hw_tx_obj->id);
+	put_unaligned_le32(flags, &hw_tx_obj->flags);
+
+	/* Clear data at end of CAN frame */
+	// FIXME: what does the controller send in CANFD if can_dlc2len(can_len2dlc(cfd->len)) > cfd->len?
+	offset = round_down(cfd->len, sizeof(u32));
+	len = round_up(can_dlc2len(dlc), sizeof(u32)) - offset;
+	if (len)
+		memset(hw_tx_obj->data + offset, 0x0, len);
+	memcpy(hw_tx_obj->data, cfd->data, cfd->len);
+
+	/* Number of bytes to be written into the RAM of the controller */
+	len = sizeof(hw_tx_obj->id) + sizeof(hw_tx_obj->flags);
+	len += round_up(cfd->len, sizeof(u32));
+
+	if (priv->devtype_data.quirks & MCP25XXFD_QUIRK_CRC_TX) {
+		u16 crc;
+
+		mcp25xxfd_spi_cmd_crc_set_len_in_ram(&load_buf->crc.cmd,
+						     len);
+		/* CRC */
+		len += sizeof(load_buf->crc.cmd);
+		crc = mcp25xxfd_crc16_compute(&load_buf->crc, len);
+		put_unaligned_be16(crc, (void *)load_buf + len);
+
+		/* Total length */
+		len += sizeof(load_buf->crc.crc);
+	} else {
+		len += sizeof(load_buf->nocrc.cmd);
+	}
+
+	tx_obj->xfer[0].len = len;
+}
+
+static int mcp25xxfd_tx_obj_write(const struct mcp25xxfd_priv *priv,
+				  struct mcp25xxfd_tx_obj *tx_obj)
+{
+	return spi_async(priv->spi, &tx_obj->msg);
+}
+
+static bool mcp25xxfd_tx_busy(const struct mcp25xxfd_priv *priv,
+			      struct mcp25xxfd_tx_ring *tx_ring)
+{
+	if (mcp25xxfd_get_tx_free(tx_ring) > 0)
+		return false;
+
+	netif_stop_queue(priv->ndev);
+
+	smp_mb();
+
+	if (mcp25xxfd_get_tx_free(tx_ring) == 0) {
+		netdev_dbg(priv->ndev,
+			   "Stopping tx-queue (tx_head=0x%08x, tx_tail=0x%08x, len=%d).\n",
+			   tx_ring->head, tx_ring->tail,
+			   tx_ring->head - tx_ring->tail);
+
+		return true;
+	}
+
+	netif_start_queue(priv->ndev);
+
+	return false;
+}
+
+static netdev_tx_t mcp25xxfd_start_xmit(struct sk_buff *skb,
+					struct net_device *ndev)
+{
+	struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+	struct mcp25xxfd_tx_ring *tx_ring = priv->tx;
+	struct mcp25xxfd_tx_obj *tx_obj;
+	u8 tx_head;
+	int err;
+
+	if (can_dropped_invalid_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
+	if (mcp25xxfd_tx_busy(priv, tx_ring))
+		return NETDEV_TX_BUSY;
+
+	tx_obj = mcp25xxfd_get_tx_obj_next(tx_ring);
+	mcp25xxfd_tx_obj_from_skb(priv, tx_obj, skb, tx_ring->head);
+
+	/* Stop queue if we occupy the complete TX FIFO */
+	tx_head = mcp25xxfd_get_tx_head(tx_ring);
+	tx_ring->head++;
+	if (tx_ring->head - tx_ring->tail >= tx_ring->obj_num)
+		netif_stop_queue(ndev);
+
+	can_put_echo_skb(skb, ndev, tx_head);
+
+	err = mcp25xxfd_tx_obj_write(priv, tx_obj);
+	if (err)
+		goto out_err;
+
+	return NETDEV_TX_OK;
+
+ out_err:
+	netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
+
+	return NETDEV_TX_OK;
+}
+
+static int mcp25xxfd_open(struct net_device *ndev)
+{
+	struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+	const struct spi_device *spi = priv->spi;
+	int err;
+
+	err = pm_runtime_get_sync(ndev->dev.parent);
+	if (err < 0) {
+		pm_runtime_put_noidle(ndev->dev.parent);
+		return err;
+	}
+
+	err = open_candev(ndev);
+	if (err)
+		goto out_pm_runtime_put;
+
+	err = mcp25xxfd_ring_alloc(priv);
+	if (err)
+		goto out_close_candev;
+
+	err = mcp25xxfd_transceiver_enable(priv);
+	if (err)
+		goto out_mcp25xxfd_ring_free;
+
+	err = mcp25xxfd_chip_start(priv);
+	if (err)
+		goto out_transceiver_disable;
+
+	can_rx_offload_enable(&priv->offload);
+
+	err = request_threaded_irq(spi->irq, NULL, mcp25xxfd_irq,
+				   IRQF_ONESHOT, dev_name(&spi->dev),
+				   priv);
+	if (err)
+		goto out_can_rx_offload_disable;
+
+	err = mcp25xxfd_chip_interrupts_enable(priv);
+	if (err)
+		goto out_free_irq;
+
+	netif_start_queue(ndev);
+
+	return 0;
+
+ out_free_irq:
+	free_irq(spi->irq, priv);
+ out_can_rx_offload_disable:
+	can_rx_offload_disable(&priv->offload);
+ out_transceiver_disable:
+	mcp25xxfd_transceiver_disable(priv);
+ out_mcp25xxfd_ring_free:
+	mcp25xxfd_ring_free(priv);
+ out_close_candev:
+	close_candev(ndev);
+ out_pm_runtime_put:
+	mcp25xxfd_chip_stop(priv, CAN_STATE_STOPPED);
+	pm_runtime_put(ndev->dev.parent);
+
+	return err;
+}
+
+static int mcp25xxfd_stop(struct net_device *ndev)
+{
+	struct mcp25xxfd_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	mcp25xxfd_chip_interrupts_disable(priv);
+	free_irq(ndev->irq, priv);
+	can_rx_offload_disable(&priv->offload);
+	mcp25xxfd_chip_stop(priv, CAN_STATE_STOPPED);
+	mcp25xxfd_transceiver_disable(priv);
+	mcp25xxfd_ring_free(priv);
+	close_candev(ndev);
+
+	pm_runtime_put(ndev->dev.parent);
+
+	return 0;
+}
+
+static const struct net_device_ops mcp25xxfd_netdev_ops = {
+	.ndo_open = mcp25xxfd_open,
+	.ndo_stop = mcp25xxfd_stop,
+	.ndo_start_xmit	= mcp25xxfd_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
+};
+
+static void
+mcp25xxfd_register_quirks(struct mcp25xxfd_priv *priv)
+{
+	const struct spi_device *spi = priv->spi;
+	const struct spi_controller *ctlr = spi->controller;
+
+	if (ctlr->flags & SPI_CONTROLLER_HALF_DUPLEX)
+		priv->devtype_data.quirks |= MCP25XXFD_QUIRK_HALF_DUPLEX;
+}
+
+static int mcp25xxfd_register_chip_detect(struct mcp25xxfd_priv *priv)
+{
+	const struct net_device *ndev = priv->ndev;
+	const struct mcp25xxfd_devtype_data *devtype_data;
+	u32 osc;
+	int err;
+
+	/* The OSC_LPMEN is only supported on MCP2518FD, so use it to
+	 * autodetect the model.
+	 */
+	err = regmap_update_bits(priv->map_reg, MCP25XXFD_REG_OSC,
+				 MCP25XXFD_REG_OSC_LPMEN,
+				 MCP25XXFD_REG_OSC_LPMEN);
+	if (err)
+		return err;
+
+	err = regmap_read(priv->map_reg, MCP25XXFD_REG_OSC, &osc);
+	if (err)
+		return err;
+
+	if (osc & MCP25XXFD_REG_OSC_LPMEN)
+		devtype_data = &mcp25xxfd_devtype_data_mcp2518fd;
+	else
+		devtype_data = &mcp25xxfd_devtype_data_mcp2517fd;
+
+	if (!mcp25xxfd_is_25XX(priv) &&
+	    priv->devtype_data.model != devtype_data->model) {
+		netdev_info(ndev,
+			    "Detected %s, but firmware specifies a %s. Fixing up.",
+			    __mcp25xxfd_get_model_str(devtype_data->model),
+			    mcp25xxfd_get_model_str(priv));
+	}
+	priv->devtype_data = *devtype_data;
+
+	/* We need to preserve the Half Duplex Quirk. */
+	mcp25xxfd_register_quirks(priv);
+
+	/* Re-init regmap with quirks of detected model. */
+	return mcp25xxfd_regmap_init(priv);
+}
+
+static int mcp25xxfd_register_check_rx_int(struct mcp25xxfd_priv *priv)
+{
+	int err, rx_pending;
+
+	if (!priv->rx_int)
+		return 0;
+
+	err = mcp25xxfd_chip_rx_int_enable(priv);
+	if (err)
+		return err;
+
+	/* Check if RX_INT is properly working. The RX_INT should not
+	 * be active after a softreset.
+	 */
+	rx_pending = gpiod_get_value_cansleep(priv->rx_int);
+
+	err = mcp25xxfd_chip_rx_int_disable(priv);
+	if (err)
+		return err;
+
+	if (!rx_pending)
+		return 0;
+
+	netdev_info(priv->ndev,
+		    "RX_INT active after softreset, disabling RX_INT support.");
+	devm_gpiod_put(&priv->spi->dev, priv->rx_int);
+	priv->rx_int = NULL;
+
+	return 0;
+}
+
+static int
+mcp25xxfd_register_get_dev_id(const struct mcp25xxfd_priv *priv,
+			      u32 *dev_id, u32 *effective_speed_hz)
+{
+	struct mcp25xxfd_map_buf_nocrc *buf_rx;
+	struct mcp25xxfd_map_buf_nocrc *buf_tx;
+	struct spi_transfer xfer[2] = { };
+	int err;
+
+	buf_rx = kzalloc(sizeof(*buf_rx), GFP_KERNEL);
+	if (!buf_rx)
+		return -ENOMEM;
+
+	buf_tx = kzalloc(sizeof(*buf_tx), GFP_KERNEL);
+	if (!buf_tx) {
+		err = -ENOMEM;
+		goto out_kfree_buf_rx;
+	}
+
+	xfer[0].tx_buf = buf_tx;
+	xfer[0].len = sizeof(buf_tx->cmd);
+	xfer[1].rx_buf = buf_rx->data;
+	xfer[1].len = sizeof(dev_id);
+
+	mcp25xxfd_spi_cmd_read_nocrc(&buf_tx->cmd, MCP25XXFD_REG_DEVID);
+	err = spi_sync_transfer(priv->spi, xfer, ARRAY_SIZE(xfer));
+	if (err)
+		goto out_kfree_buf_tx;
+
+	*dev_id = be32_to_cpup((__be32 *)buf_rx->data);
+	*effective_speed_hz = xfer->effective_speed_hz;
+
+ out_kfree_buf_tx:
+	kfree(buf_tx);
+ out_kfree_buf_rx:
+	kfree(buf_rx);
+
+	return 0;
+}
+
+#define MCP25XXFD_QUIRK_ACTIVE(quirk) \
+	(priv->devtype_data.quirks & MCP25XXFD_QUIRK_##quirk ? '+' : '-')
+
+static int
+mcp25xxfd_register_done(const struct mcp25xxfd_priv *priv)
+{
+	u32 dev_id, effective_speed_hz;
+	int err;
+
+	err = mcp25xxfd_register_get_dev_id(priv, &dev_id,
+					    &effective_speed_hz);
+	if (err)
+		return err;
+
+	netdev_info(priv->ndev,
+		    "%s rev%lu.%lu (%cRX_INT %cMAB_NO_WARN %cCRC_REG %cCRC_RX %cCRC_TX %cECC %cHD m:%u.%02uMHz r:%u.%02uMHz e:%u.%02uMHz) successfully initialized.\n",
+		    mcp25xxfd_get_model_str(priv),
+		    FIELD_GET(MCP25XXFD_REG_DEVID_ID_MASK, dev_id),
+		    FIELD_GET(MCP25XXFD_REG_DEVID_REV_MASK, dev_id),
+		    priv->rx_int ? '+' : '-',
+		    MCP25XXFD_QUIRK_ACTIVE(MAB_NO_WARN),
+		    MCP25XXFD_QUIRK_ACTIVE(CRC_REG),
+		    MCP25XXFD_QUIRK_ACTIVE(CRC_RX),
+		    MCP25XXFD_QUIRK_ACTIVE(CRC_TX),
+		    MCP25XXFD_QUIRK_ACTIVE(ECC),
+		    MCP25XXFD_QUIRK_ACTIVE(HALF_DUPLEX),
+		    priv->spi_max_speed_hz_orig / 1000000,
+		    priv->spi_max_speed_hz_orig % 1000000 / 1000 / 10,
+		    priv->spi->max_speed_hz / 1000000,
+		    priv->spi->max_speed_hz % 1000000 / 1000 / 10,
+		    effective_speed_hz / 1000000,
+		    effective_speed_hz % 1000000 / 1000 / 10);
+
+	return 0;
+}
+
+static int mcp25xxfd_register(struct mcp25xxfd_priv *priv)
+{
+	struct net_device *ndev = priv->ndev;
+	int err;
+
+	err = mcp25xxfd_clks_and_vdd_enable(priv);
+	if (err)
+		return err;
+
+	pm_runtime_get_noresume(ndev->dev.parent);
+	err = pm_runtime_set_active(ndev->dev.parent);
+	if (err)
+		goto out_runtime_put_noidle;
+	pm_runtime_enable(ndev->dev.parent);
+
+	mcp25xxfd_register_quirks(priv);
+
+	err = mcp25xxfd_chip_softreset(priv);
+	if (err == -ENODEV)
+		goto out_runtime_disable;
+	if (err)
+		goto out_chip_set_mode_sleep;
+
+	err = mcp25xxfd_register_chip_detect(priv);
+	if (err)
+		goto out_chip_set_mode_sleep;
+
+	err = mcp25xxfd_register_check_rx_int(priv);
+	if (err)
+		goto out_chip_set_mode_sleep;
+
+	err = register_candev(ndev);
+	if (err)
+		goto out_chip_set_mode_sleep;
+
+	err = mcp25xxfd_register_done(priv);
+	if (err)
+		goto out_unregister_candev;
+
+	/* Put controller into sleep mode and let pm_runtime_put()
+	 * disable the clocks and vdd. If CONFIG_PM is not enabled,
+	 * the clocks and vdd will stay powered.
+	 */
+	err = mcp25xxfd_chip_set_mode(priv, MCP25XXFD_REG_CON_MODE_SLEEP);
+	if (err)
+		goto out_unregister_candev;
+
+	pm_runtime_put(ndev->dev.parent);
+
+	return 0;
+
+ out_unregister_candev:
+	unregister_candev(ndev);
+ out_chip_set_mode_sleep:
+	mcp25xxfd_chip_set_mode(priv, MCP25XXFD_REG_CON_MODE_SLEEP);
+ out_runtime_disable:
+	pm_runtime_disable(ndev->dev.parent);
+ out_runtime_put_noidle:
+	pm_runtime_put_noidle(ndev->dev.parent);
+	mcp25xxfd_clks_and_vdd_disable(priv);
+
+	return err;
+}
+
+static inline void mcp25xxfd_unregister(struct mcp25xxfd_priv *priv)
+{
+	struct net_device *ndev	= priv->ndev;
+
+	unregister_candev(ndev);
+
+	pm_runtime_get_sync(ndev->dev.parent);
+	pm_runtime_put_noidle(ndev->dev.parent);
+	mcp25xxfd_clks_and_vdd_disable(priv);
+	pm_runtime_disable(ndev->dev.parent);
+}
+
+static const struct of_device_id mcp25xxfd_of_match[] = {
+	{
+		.compatible = "microchip,mcp2517fd",
+		.data = &mcp25xxfd_devtype_data_mcp2517fd,
+	}, {
+		.compatible = "microchip,mcp2518fd",
+		.data = &mcp25xxfd_devtype_data_mcp2518fd,
+	}, {
+		.compatible = "microchip,mcp25xxfd",
+		.data = &mcp25xxfd_devtype_data_mcp25xxfd,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, mcp25xxfd_of_match);
+
+static const struct spi_device_id mcp25xxfd_id_table[] = {
+	{
+		.name = "mcp2517fd",
+		.driver_data = (kernel_ulong_t)&mcp25xxfd_devtype_data_mcp2517fd,
+	}, {
+		.name = "mcp2518fd",
+		.driver_data = (kernel_ulong_t)&mcp25xxfd_devtype_data_mcp2518fd,
+	}, {
+		.name = "mcp25xxfd",
+		.driver_data = (kernel_ulong_t)&mcp25xxfd_devtype_data_mcp25xxfd,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(spi, mcp25xxfd_id_table);
+
+static int mcp25xxfd_probe(struct spi_device *spi)
+{
+	const void *match;
+	struct net_device *ndev;
+	struct mcp25xxfd_priv *priv;
+	struct gpio_desc *rx_int;
+	struct regulator *reg_vdd, *reg_xceiver;
+	struct clk *clk;
+	u32 freq;
+	int err;
+
+	rx_int = devm_gpiod_get_optional(&spi->dev, "microchip,rx-int",
+					 GPIOD_IN);
+	if (PTR_ERR(rx_int) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(rx_int))
+		return PTR_ERR(rx_int);
+
+	reg_vdd = devm_regulator_get_optional(&spi->dev, "vdd");
+	if (PTR_ERR(reg_vdd) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (PTR_ERR(reg_vdd) == -ENODEV)
+		reg_vdd = NULL;
+	else if (IS_ERR(reg_vdd))
+		return PTR_ERR(reg_vdd);
+
+	reg_xceiver = devm_regulator_get_optional(&spi->dev, "xceiver");
+	if (PTR_ERR(reg_xceiver) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (PTR_ERR(reg_xceiver) == -ENODEV)
+		reg_xceiver = NULL;
+	else if (IS_ERR(reg_xceiver))
+		return PTR_ERR(reg_xceiver);
+
+	clk = devm_clk_get(&spi->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&spi->dev, "No Oscillator (clock) defined.\n");
+		return PTR_ERR(clk);
+	}
+	freq = clk_get_rate(clk);
+
+	/* Sanity check */
+	if (freq < MCP25XXFD_SYSCLOCK_HZ_MIN ||
+	    freq > MCP25XXFD_SYSCLOCK_HZ_MAX) {
+		dev_err(&spi->dev,
+			"Oscillator frequency (%u Hz) is too low or high.\n",
+			freq);
+		return -ERANGE;
+	}
+
+	if (freq <= MCP25XXFD_SYSCLOCK_HZ_MAX / MCP25XXFD_OSC_PLL_MULTIPLIER) {
+		dev_err(&spi->dev,
+			"Oscillator frequency (%u Hz) is too low and PLL is not supported.\n",
+			freq);
+		return -ERANGE;
+	}
+
+	ndev = alloc_candev(sizeof(struct mcp25xxfd_priv),
+			    MCP25XXFD_TX_OBJ_NUM_MAX);
+	if (!ndev)
+		return -ENOMEM;
+
+	SET_NETDEV_DEV(ndev, &spi->dev);
+
+	ndev->netdev_ops = &mcp25xxfd_netdev_ops;
+	ndev->irq = spi->irq;
+	ndev->flags |= IFF_ECHO;
+
+	priv = netdev_priv(ndev);
+	spi_set_drvdata(spi, priv);
+	priv->can.clock.freq = freq;
+	priv->can.do_set_mode = mcp25xxfd_set_mode;
+	priv->can.do_get_berr_counter = mcp25xxfd_get_berr_counter;
+	priv->can.bittiming_const = &mcp25xxfd_bittiming_const;
+	priv->can.data_bittiming_const = &mcp25xxfd_data_bittiming_const;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
+		CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO;
+	priv->ndev = ndev;
+	priv->spi = spi;
+	priv->rx_int = rx_int;
+	priv->clk = clk;
+	priv->reg_vdd = reg_vdd;
+	priv->reg_xceiver = reg_xceiver;
+
+	match = device_get_match_data(&spi->dev);
+	if (match)
+		priv->devtype_data = *(struct mcp25xxfd_devtype_data *)match;
+	else
+		priv->devtype_data = *(struct mcp25xxfd_devtype_data *)
+			spi_get_device_id(spi)->driver_data;
+
+	/* According to the datasheet the SPI clock must be less or
+	 * equal SYSCLOCK / 2.
+	 *
+	 * It turns out, that the Controller is not stable at this
+	 * rate. Known good and bad combinations are:
+	 *
+	 * MCP	ext-clk	SoC			SPI			SPI-clk		max-clk	parent-clk	Status	config
+	 *
+	 * 2518	20 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	 9090909 Hz	 90.90%	600000000 Hz	good	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2518	20 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	 9375000 Hz	 93.75%	600000000 Hz	bad	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2518	40 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	17647058 Hz	 88.24%	600000000 Hz	good	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2518	40 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	18750000 Hz	 93.75%	600000000 Hz	bad	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2517	20 MHz	fsl,imx8mm		fsl,imx51-ecspi		 9090909 Hz	 90.09%	 18181819 Hz	good	assigned-clocks = <&clk IMX8MM_CLK_ECSPIx_ROOT>
+	 * 2517	20 MHz	fsl,imx8mm		fsl,imx51-ecspi		 9523809 Hz	 95.34%	 28571429 Hz	bad	assigned-clocks = <&clk IMX8MM_CLK_ECSPIx_ROOT>
+	 *
+	 * Limit SPI clock to 92.5% of SYSCLOCK / 2 for now.
+	 */
+	priv->spi_max_speed_hz_orig = spi->max_speed_hz;
+	spi->max_speed_hz = min(spi->max_speed_hz, freq / 2 / 1000 * 925);
+	spi->bits_per_word = 8;
+	spi->rt = true;
+	err = spi_setup(spi);
+	if (err)
+		goto out_free_candev;
+
+	err = mcp25xxfd_regmap_init(priv);
+	if (err)
+		goto out_free_candev;
+
+	err = can_rx_offload_add_manual(ndev, &priv->offload,
+					MCP25XXFD_NAPI_WEIGHT);
+	if (err)
+		goto out_free_candev;
+
+	err = mcp25xxfd_register(priv);
+	if (err)
+		goto out_free_candev;
+
+	return 0;
+
+ out_free_candev:
+	spi->max_speed_hz = priv->spi_max_speed_hz_orig;
+
+	free_candev(ndev);
+
+	return err;
+}
+
+static int mcp25xxfd_remove(struct spi_device *spi)
+{
+	struct mcp25xxfd_priv *priv = spi_get_drvdata(spi);
+	struct net_device *ndev = priv->ndev;
+
+	can_rx_offload_del(&priv->offload);
+	mcp25xxfd_unregister(priv);
+	spi->max_speed_hz = priv->spi_max_speed_hz_orig;
+	free_candev(ndev);
+
+	return 0;
+}
+
+static int __maybe_unused mcp25xxfd_runtime_suspend(struct device *device)
+{
+	const struct mcp25xxfd_priv *priv = dev_get_drvdata(device);
+
+	return mcp25xxfd_clks_and_vdd_disable(priv);
+}
+
+static int __maybe_unused mcp25xxfd_runtime_resume(struct device *device)
+{
+	const struct mcp25xxfd_priv *priv = dev_get_drvdata(device);
+
+	return mcp25xxfd_clks_and_vdd_enable(priv);
+}
+
+static const struct dev_pm_ops mcp25xxfd_pm_ops = {
+	SET_RUNTIME_PM_OPS(mcp25xxfd_runtime_suspend,
+			   mcp25xxfd_runtime_resume, NULL)
+};
+
+static struct spi_driver mcp25xxfd_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.pm = &mcp25xxfd_pm_ops,
+		.of_match_table = mcp25xxfd_of_match,
+	},
+	.probe = mcp25xxfd_probe,
+	.remove = mcp25xxfd_remove,
+	.id_table = mcp25xxfd_id_table,
+};
+module_spi_driver(mcp25xxfd_driver);
+
+MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>");
+MODULE_DESCRIPTION("Microchip MCP25xxFD Family CAN controller driver");
+MODULE_LICENSE("GPL v2");
-- 
2.28.0

[PATCH 36/37] can: mcp25xxfd: add listen-only mode

[Marc Kleine-Budde]

From: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>

This commit enables listen-only mode, which works internally like CANFD mode.

Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
index 043259b3e04e..6ffa7af50119 100644
--- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
@@ -392,7 +392,8 @@ static int mcp25xxfd_ring_alloc(struct mcp25xxfd_priv *priv)
 	int ram_free, i;
 
 	tef_obj_size = sizeof(struct mcp25xxfd_hw_tef_obj);
-	if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+	/* listen-only mode works like FD mode */
+	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD)) {
 		tx_obj_num = MCP25XXFD_TX_OBJ_NUM_CANFD;
 		tx_obj_size = sizeof(struct mcp25xxfd_hw_tx_obj_canfd);
 		rx_obj_size = sizeof(struct mcp25xxfd_hw_rx_obj_canfd);
@@ -807,7 +808,7 @@ mcp25xxfd_chip_rx_fifo_init_one(const struct mcp25xxfd_priv *priv,
 		MCP25XXFD_REG_FIFOCON_RXOVIE |
 		MCP25XXFD_REG_FIFOCON_TFNRFNIE;
 
-	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
 		fifo_con |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
 				       MCP25XXFD_REG_FIFOCON_PLSIZE_64);
 	else
@@ -857,7 +858,7 @@ static int mcp25xxfd_chip_fifo_init(const struct mcp25xxfd_priv *priv)
 		MCP25XXFD_REG_FIFOCON_TXEN |
 		MCP25XXFD_REG_FIFOCON_TXATIE;
 
-	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_FD))
 		val |= FIELD_PREP(MCP25XXFD_REG_FIFOCON_PLSIZE_MASK,
 				  MCP25XXFD_REG_FIFOCON_PLSIZE_64);
 	else
@@ -930,7 +931,9 @@ static u8 mcp25xxfd_get_normal_mode(const struct mcp25xxfd_priv *priv)
 {
 	u8 mode;
 
-	if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		mode = MCP25XXFD_REG_CON_MODE_LISTENONLY;
+	else if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
 		mode = MCP25XXFD_REG_CON_MODE_MIXED;
 	else
 		mode = MCP25XXFD_REG_CON_MODE_CAN2_0;
@@ -2787,8 +2790,9 @@ static int mcp25xxfd_probe(struct spi_device *spi)
 	priv->can.do_get_berr_counter = mcp25xxfd_get_berr_counter;
 	priv->can.bittiming_const = &mcp25xxfd_bittiming_const;
 	priv->can.data_bittiming_const = &mcp25xxfd_data_bittiming_const;
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
-		CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
+		CAN_CTRLMODE_BERR_REPORTING | CAN_CTRLMODE_FD |
+		CAN_CTRLMODE_FD_NON_ISO;
 	priv->ndev = ndev;
 	priv->spi = spi;
 	priv->rx_int = rx_int;
-- 
2.28.0

[PATCH 37/37] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver

[Marc Kleine-Budde]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Add MAINTAINERS entry for Microchip MCP25XXFD SPI-CAN network driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200910133806.25077-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c99577961cc4..fcb63f0c9635 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10671,6 +10671,14 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-mcp2221.c
 
+MCP25XXFD SPI-CAN NETWORK DRIVER
+M:	Marc Kleine-Budde <mkl@pengutronix.de>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml
+F:	drivers/net/can/spi/mcp25xxfd/
+
 MCP4018 AND MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVERS
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org
-- 
2.28.0