* [PATCH 0/2] clk: vc5: Add IDT VersaClock 5P49V5925
@ 2017-07-07 1:57 Vladimir Barinov
2017-07-07 1:57 ` [PATCH 1/2] clk: vc5: Add support for " Vladimir Barinov
2017-07-07 1:57 ` [PATCH 2/2] dt: Add bindings " Vladimir Barinov
0 siblings, 2 replies; 10+ messages in thread
From: Vladimir Barinov @ 2017-07-07 1:57 UTC (permalink / raw)
To: Marek Vasut, Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland
Cc: linux-clk, linux-kernel, devicetree, Vladimir Barinov
Hello,
This adds the folowing:
- Update IDT VersaClock 5 driver to support 5P49V5925
- Add bindings for IDT VersaClock 5P49V5925
Vladimir Barinov (2):
[1/2] clk: vc5: Add support for IDT VersaClock 5P49V5925
[2/2] dt: Add bindings for IDT VersaClock 5P49V5925
---
This patchset is against the 'kernel/git/torvalds/linux.git' repo.
Documentation/devicetree/bindings/clock/idt,versaclock5.txt | 11 +++++++----
drivers/clk/clk-versaclock5.c | 11 +++++++++++
2 files changed, 18 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] clk: vc5: Add support for IDT VersaClock 5P49V5925
2017-07-07 1:57 [PATCH 0/2] clk: vc5: Add IDT VersaClock 5P49V5925 Vladimir Barinov
@ 2017-07-07 1:57 ` Vladimir Barinov
2017-07-09 13:29 ` Marek Vasut
2017-07-07 1:57 ` [PATCH 2/2] dt: Add bindings " Vladimir Barinov
1 sibling, 1 reply; 10+ messages in thread
From: Vladimir Barinov @ 2017-07-07 1:57 UTC (permalink / raw)
To: Marek Vasut, Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland
Cc: linux-clk, linux-kernel, devicetree, Vladimir Barinov
From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Update IDT VersaClock 5 driver to support 5P49V5925. This chip has only
external clock input, four fractional dividers (FODs) and five clock
outputs (four universal clock outputs and one reference clock output at
OUT0_SELB_I2C).
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
---
drivers/clk/clk-versaclock5.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index ea7d552..88b749d 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -126,6 +126,7 @@
/* Supported IDT VC5 models. */
enum vc5_model {
IDT_VC5_5P49V5923,
+ IDT_VC5_5P49V5925,
IDT_VC5_5P49V5933,
IDT_VC5_5P49V5935,
};
@@ -595,6 +596,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
case IDT_VC5_5P49V5933:
return (n == 0) ? 0 : 3;
case IDT_VC5_5P49V5923:
+ case IDT_VC5_5P49V5925:
case IDT_VC5_5P49V5935:
default:
return n;
@@ -785,6 +787,13 @@ static int vc5_remove(struct i2c_client *client)
.flags = 0,
};
+static const struct vc5_chip_info idt_5p49v5925_info = {
+ .model = IDT_VC5_5P49V5925,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = 0,
+};
+
static const struct vc5_chip_info idt_5p49v5933_info = {
.model = IDT_VC5_5P49V5933,
.clk_fod_cnt = 2,
@@ -801,6 +810,7 @@ static int vc5_remove(struct i2c_client *client)
static const struct i2c_device_id vc5_id[] = {
{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
+ { "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
{ }
@@ -809,6 +819,7 @@ static int vc5_remove(struct i2c_client *client)
static const struct of_device_id clk_vc5_of_match[] = {
{ .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
+ { .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info },
{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
{ },
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] clk: vc5: Add support for IDT VersaClock 5P49V5925
2017-07-07 1:57 ` [PATCH 1/2] clk: vc5: Add support for " Vladimir Barinov
@ 2017-07-09 13:29 ` Marek Vasut
0 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2017-07-09 13:29 UTC (permalink / raw)
To: Vladimir Barinov, Michael Turquette, Stephen Boyd, Rob Herring,
Mark Rutland
Cc: linux-clk, linux-kernel, devicetree
On 07/07/2017 03:57 AM, Vladimir Barinov wrote:
> From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
>
> Update IDT VersaClock 5 driver to support 5P49V5925. This chip has only
> external clock input, four fractional dividers (FODs) and five clock
> outputs (four universal clock outputs and one reference clock output at
> OUT0_SELB_I2C).
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> drivers/clk/clk-versaclock5.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
> index ea7d552..88b749d 100644
> --- a/drivers/clk/clk-versaclock5.c
> +++ b/drivers/clk/clk-versaclock5.c
> @@ -126,6 +126,7 @@
> /* Supported IDT VC5 models. */
> enum vc5_model {
> IDT_VC5_5P49V5923,
> + IDT_VC5_5P49V5925,
> IDT_VC5_5P49V5933,
> IDT_VC5_5P49V5935,
> };
> @@ -595,6 +596,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
> case IDT_VC5_5P49V5933:
> return (n == 0) ? 0 : 3;
> case IDT_VC5_5P49V5923:
> + case IDT_VC5_5P49V5925:
> case IDT_VC5_5P49V5935:
> default:
> return n;
> @@ -785,6 +787,13 @@ static int vc5_remove(struct i2c_client *client)
> .flags = 0,
> };
>
> +static const struct vc5_chip_info idt_5p49v5925_info = {
> + .model = IDT_VC5_5P49V5925,
> + .clk_fod_cnt = 4,
> + .clk_out_cnt = 5,
> + .flags = 0,
> +};
> +
> static const struct vc5_chip_info idt_5p49v5933_info = {
> .model = IDT_VC5_5P49V5933,
> .clk_fod_cnt = 2,
> @@ -801,6 +810,7 @@ static int vc5_remove(struct i2c_client *client)
>
> static const struct i2c_device_id vc5_id[] = {
> { "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
> + { "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
> { "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
> { "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
> { }
> @@ -809,6 +819,7 @@ static int vc5_remove(struct i2c_client *client)
>
> static const struct of_device_id clk_vc5_of_match[] = {
> { .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
> + { .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info },
> { .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
> { .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
> { },
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2017-07-07 1:57 [PATCH 0/2] clk: vc5: Add IDT VersaClock 5P49V5925 Vladimir Barinov
2017-07-07 1:57 ` [PATCH 1/2] clk: vc5: Add support for " Vladimir Barinov
@ 2017-07-07 1:57 ` Vladimir Barinov
2017-07-09 13:31 ` Marek Vasut
1 sibling, 1 reply; 10+ messages in thread
From: Vladimir Barinov @ 2017-07-07 1:57 UTC (permalink / raw)
To: Marek Vasut, Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland
Cc: linux-clk, linux-kernel, devicetree, Vladimir Barinov
From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
IDT VersaClock 5 5P49V5925 has 4 clock outputs, 4 fractional dividers.
Input clock source can be taken only from external reference clock.
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
---
Documentation/devicetree/bindings/clock/idt,versaclock5.txt | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index 53d7e50..a1ad9e0 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -6,19 +6,21 @@ from 3 to 12 output clocks.
==I2C device node==
Required properties:
-- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
- "idt,5p49v5935".
+- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5925" ,
+ "idt,5p49v5933", "idt,5p49v5935".
- reg: i2c device address, shall be 0x68 or 0x6a.
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock handles,
- - 5p49v5923: (required) either or both of XTAL or CLKIN
+ - 5p49v5923 and
+ - 5p49v5925: (required) either or both of XTAL or CLKIN
reference clock.
- 5p49v5933 and
- 5p49v5935: (optional) property not present (internal
Xtal used) or CLKIN reference
clock.
- clock-names: from common clock binding; clock input names, can be
- - 5p49v5923: (required) either or both of "xin", "clkin".
+ - 5p49v5923 and
+ - 5p49v5925: (required) either or both of "xin", "clkin".
- 5p49v5933 and
- 5p49v5935: (optional) property not present or "clkin".
@@ -37,6 +39,7 @@ clock specifier, the following mapping applies:
1 -- OUT1
2 -- OUT4
+5P49V5925 and
5P49V5935:
0 -- OUT0_SEL_I2CB
1 -- OUT1
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2017-07-07 1:57 ` [PATCH 2/2] dt: Add bindings " Vladimir Barinov
@ 2017-07-09 13:31 ` Marek Vasut
2017-07-09 17:38 ` Vladimir Barinov
0 siblings, 1 reply; 10+ messages in thread
From: Marek Vasut @ 2017-07-09 13:31 UTC (permalink / raw)
To: Vladimir Barinov, Michael Turquette, Stephen Boyd, Rob Herring,
Mark Rutland
Cc: linux-clk, linux-kernel, devicetree
On 07/07/2017 03:57 AM, Vladimir Barinov wrote:
> From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
>
> IDT VersaClock 5 5P49V5925 has 4 clock outputs
In 1/2 you said it has 4 FODs and 5 outputs (and it does have 5 outputs,
4 from FODs and 1 I2C_OUTB).
>, 4 fractional dividers.
> Input clock source can be taken only from external reference clock.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
You might want to rebase this on top of and retest against [1], there
are 8 patches in total fixing some stuff and adding VC6 support.
[1] https://patchwork.kernel.org/patch/9831797/
> ---
> Documentation/devicetree/bindings/clock/idt,versaclock5.txt | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> index 53d7e50..a1ad9e0 100644
> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> @@ -6,19 +6,21 @@ from 3 to 12 output clocks.
> ==I2C device node==
>
> Required properties:
> -- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
> - "idt,5p49v5935".
> +- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5925" ,
> + "idt,5p49v5933", "idt,5p49v5935".
> - reg: i2c device address, shall be 0x68 or 0x6a.
> - #clock-cells: from common clock binding; shall be set to 1.
> - clocks: from common clock binding; list of parent clock handles,
> - - 5p49v5923: (required) either or both of XTAL or CLKIN
> + - 5p49v5923 and
> + - 5p49v5925: (required) either or both of XTAL or CLKIN
> reference clock.
> - 5p49v5933 and
> - 5p49v5935: (optional) property not present (internal
> Xtal used) or CLKIN reference
> clock.
> - clock-names: from common clock binding; clock input names, can be
> - - 5p49v5923: (required) either or both of "xin", "clkin".
> + - 5p49v5923 and
> + - 5p49v5925: (required) either or both of "xin", "clkin".
> - 5p49v5933 and
> - 5p49v5935: (optional) property not present or "clkin".
>
> @@ -37,6 +39,7 @@ clock specifier, the following mapping applies:
> 1 -- OUT1
> 2 -- OUT4
>
> +5P49V5925 and
> 5P49V5935:
> 0 -- OUT0_SEL_I2CB
> 1 -- OUT1
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2017-07-09 13:31 ` Marek Vasut
@ 2017-07-09 17:38 ` Vladimir Barinov
2017-07-09 17:42 ` Marek Vasut
0 siblings, 1 reply; 10+ messages in thread
From: Vladimir Barinov @ 2017-07-09 17:38 UTC (permalink / raw)
To: Marek Vasut, Michael Turquette, Stephen Boyd, Rob Herring, Mark Rutland
Cc: linux-clk, linux-kernel, devicetree
On 09.07.2017 16:31, Marek Vasut wrote:
> On 07/07/2017 03:57 AM, Vladimir Barinov wrote:
>> From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
>>
>> IDT VersaClock 5 5P49V5925 has 4 clock outputs
> In 1/2 you said it has 4 FODs and 5 outputs (and it does have 5 outputs,
> 4 from FODs and 1 I2C_OUTB).
That was a copy typo. Thank you for pointing to this.
>
>> , 4 fractional dividers.
>> Input clock source can be taken only from external reference clock.
>>
>> Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
> You might want to rebase this on top of and retest against [1], there
> are 8 patches in total fixing some stuff and adding VC6 support.
>
> [1] https://patchwork.kernel.org/patch/9831797/
I've tested your patch series with ULCB board and HDMI display.
I will rebase 5P49V5925 patches on top of them.
Regards,
Vladimir
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2017-07-09 17:38 ` Vladimir Barinov
@ 2017-07-09 17:42 ` Marek Vasut
0 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2017-07-09 17:42 UTC (permalink / raw)
To: Vladimir Barinov, Michael Turquette, Stephen Boyd, Rob Herring,
Mark Rutland
Cc: linux-clk, linux-kernel, devicetree
On 07/09/2017 07:38 PM, Vladimir Barinov wrote:
> On 09.07.2017 16:31, Marek Vasut wrote:
>> On 07/07/2017 03:57 AM, Vladimir Barinov wrote:
>>> From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
>>>
>>> IDT VersaClock 5 5P49V5925 has 4 clock outputs
>> In 1/2 you said it has 4 FODs and 5 outputs (and it does have 5 outputs,
>> 4 from FODs and 1 I2C_OUTB).
> That was a copy typo. Thank you for pointing to this.
>
>>
>>> , 4 fractional dividers.
>>> Input clock source can be taken only from external reference clock.
>>>
>>> Signed-off-by: Vladimir Barinov
>>> <vladimir.barinov+renesas@cogentembedded.com>
>> You might want to rebase this on top of and retest against [1], there
>> are 8 patches in total fixing some stuff and adding VC6 support.
>>
>> [1] https://patchwork.kernel.org/patch/9831797/
>
> I've tested your patch series with ULCB board and HDMI display.
> I will rebase 5P49V5925 patches on top of them.
Thanks! That makes things easy :)
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] clk: vc5: Add support for IDT VersaClock 5P49V6965
@ 2020-04-04 16:15 Adam Ford
2020-04-04 16:15 ` [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925 Adam Ford
0 siblings, 1 reply; 10+ messages in thread
From: Adam Ford @ 2020-04-04 16:15 UTC (permalink / raw)
To: linux-clk
Cc: aford, charles.stevens, Adam Ford, Michael Turquette,
Stephen Boyd, Rob Herring, Marek Vasut, devicetree, linux-kernel
Update IDT VersaClock 5 driver to support 5P49V6965.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 24fef51fbcb5..fa96659f8023
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -124,6 +124,7 @@ enum vc5_model {
IDT_VC5_5P49V5933,
IDT_VC5_5P49V5935,
IDT_VC6_5P49V6901,
+ IDT_VC6_5P49V6965,
};
/* Structure to describe features of a particular VC5 model */
@@ -683,6 +684,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
case IDT_VC5_5P49V5925:
case IDT_VC5_5P49V5935:
case IDT_VC6_5P49V6901:
+ case IDT_VC6_5P49V6965:
default:
return n;
}
@@ -956,12 +958,20 @@ static const struct vc5_chip_info idt_5p49v6901_info = {
.flags = VC5_HAS_PFD_FREQ_DBL,
};
+static const struct vc5_chip_info idt_5p49v6965_info = {
+ .model = IDT_VC6_5P49V6965,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = 0,
+};
+
static const struct i2c_device_id vc5_id[] = {
{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
{ "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
+ { "5p49v6965", .driver_data = IDT_VC6_5P49V6965 },
{ }
};
MODULE_DEVICE_TABLE(i2c, vc5_id);
@@ -972,6 +982,7 @@ static const struct of_device_id clk_vc5_of_match[] = {
{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
+ { .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info },
{ },
};
MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2020-04-04 16:15 [PATCH 1/2] clk: vc5: Add support for IDT VersaClock 5P49V6965 Adam Ford
@ 2020-04-04 16:15 ` Adam Ford
2020-04-14 18:15 ` Rob Herring
2020-05-29 4:05 ` Stephen Boyd
0 siblings, 2 replies; 10+ messages in thread
From: Adam Ford @ 2020-04-04 16:15 UTC (permalink / raw)
To: linux-clk
Cc: aford, charles.stevens, Adam Ford, Michael Turquette,
Stephen Boyd, Rob Herring, Marek Vasut, devicetree, linux-kernel
IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index 05a245c9df08..bcff681a4bd0 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -12,6 +12,7 @@ Required properties:
"idt,5p49v5933"
"idt,5p49v5935"
"idt,5p49v6901"
+ "idt,5p49v6965"
- reg: i2c device address, shall be 0x68 or 0x6a.
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock handles,
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2020-04-04 16:15 ` [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925 Adam Ford
@ 2020-04-14 18:15 ` Rob Herring
2020-05-29 4:05 ` Stephen Boyd
1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-04-14 18:15 UTC (permalink / raw)
To: Adam Ford
Cc: linux-clk, aford, charles.stevens, Adam Ford, Michael Turquette,
Stephen Boyd, Marek Vasut, devicetree, linux-kernel
On Sat, 4 Apr 2020 11:15:36 -0500, Adam Ford wrote:
> IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925
2020-04-04 16:15 ` [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925 Adam Ford
2020-04-14 18:15 ` Rob Herring
@ 2020-05-29 4:05 ` Stephen Boyd
1 sibling, 0 replies; 10+ messages in thread
From: Stephen Boyd @ 2020-05-29 4:05 UTC (permalink / raw)
To: Adam Ford, linux-clk
Cc: aford, charles.stevens, Adam Ford, Michael Turquette,
Rob Herring, Marek Vasut, devicetree, linux-kernel
Quoting Adam Ford (2020-04-04 09:15:36)
> IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> index 05a245c9df08..bcff681a4bd0 100644
> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
Applied to clk-next
BTW, the patch format threw my scripts off because there isn't a triple
dash after the SoB line.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-05-29 4:05 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-07 1:57 [PATCH 0/2] clk: vc5: Add IDT VersaClock 5P49V5925 Vladimir Barinov
2017-07-07 1:57 ` [PATCH 1/2] clk: vc5: Add support for " Vladimir Barinov
2017-07-09 13:29 ` Marek Vasut
2017-07-07 1:57 ` [PATCH 2/2] dt: Add bindings " Vladimir Barinov
2017-07-09 13:31 ` Marek Vasut
2017-07-09 17:38 ` Vladimir Barinov
2017-07-09 17:42 ` Marek Vasut
2020-04-04 16:15 [PATCH 1/2] clk: vc5: Add support for IDT VersaClock 5P49V6965 Adam Ford
2020-04-04 16:15 ` [PATCH 2/2] dt: Add bindings for IDT VersaClock 5P49V5925 Adam Ford
2020-04-14 18:15 ` Rob Herring
2020-05-29 4:05 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).