linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Subject: [PATCH V6 0/5] Add APSS clock controller support for IPQ6018
Date: Wed, 27 May 2020 17:54:47 +0530	[thread overview]
Message-ID: <1590582292-13314-1-git-send-email-sivaprak@codeaurora.org> (raw)

The CPU on Qualcomm's IPQ6018 devices are primarily fed by APSS PLL and XO,
these are connected to a clock mux and enable block.

This patch series adds support for these clocks and inturn enables clocks
required for CPU freq.

[V6]
 * Split mailbox driver from this series, mailbox changes will sent as a
   separate series
 * Addressed review comments from Stephen
[V5]
 * Addressed Bjorn comments on apss clk and dt-bindings
 * Patch 2 depends on a53 pll dt-bindings
   https://www.spinics.net/lists/linux-clk/msg48358.html  
[V4]
 * Re-written PLL found on IPQ platforms as a separate driver
 * Addressed stephen's comments on apss clock controller and pll
 * Addressed Rob's review comments on bindings
 * moved a53 pll binding from this series as it is not applicable, will send
   it separately.
[V3]
 * Fixed dt binding check error in patch2
   dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
[V2]
 * Restructred the patch series as there are two different HW blocks,
   the mux and enable belongs to the apcs block and PLL has a separate HW
   block.
 * Converted qcom mailbox and qcom a53 pll documentation to yaml.
 * Addressed review comments from Stephen, Rob and Sibi where it is applicable.
 * Changed this cover letter to state the purpose of this patch series

Sivaprakash Murugesan (5):
  dt-bindings: clock: add ipq6018 a53 pll compatible
  clk: qcom: Add ipq apss pll driver
  clk: qcom: Add DT bindings for ipq6018 apss clock controller
  clk: qcom: Add ipq6018 apss clock controller
  arm64: dts: ipq6018: Add support for apss pll

 .../devicetree/bindings/clock/qcom,a53pll.yaml     |  18 ++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |   8 ++
 drivers/clk/qcom/Kconfig                           |  19 ++++
 drivers/clk/qcom/Makefile                          |   2 +
 drivers/clk/qcom/apss-ipq-pll.c                    |  95 ++++++++++++++++++
 drivers/clk/qcom/apss-ipq6018.c                    | 106 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,apss-ipq.h          |  12 +++
 7 files changed, 260 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq-pll.c
 create mode 100644 drivers/clk/qcom/apss-ipq6018.c
 create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h

-- 
2.7.4


             reply	other threads:[~2020-05-27 12:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-27 12:24 Sivaprakash Murugesan [this message]
2020-05-27 12:24 ` [PATCH V6 1/5] dt-bindings: clock: add ipq6018 a53 pll compatible Sivaprakash Murugesan
2020-05-29 18:08   ` Rob Herring
2020-05-27 12:24 ` [PATCH V6 2/5] clk: qcom: Add ipq apss pll driver Sivaprakash Murugesan
2020-05-27 12:24 ` [PATCH V6 3/5] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-05-29 18:08   ` Rob Herring
2020-05-27 12:24 ` [PATCH V6 4/5] clk: qcom: Add " Sivaprakash Murugesan
2020-05-28  1:59   ` Stephen Boyd
2020-06-01 12:41     ` Sivaprakash Murugesan
2020-06-01 19:36       ` Stephen Boyd
2020-06-02 10:47         ` Sivaprakash Murugesan
2020-06-03  5:31           ` Stephen Boyd
2020-05-27 12:24 ` [PATCH V6 5/5] arm64: dts: ipq6018: Add support for apss pll Sivaprakash Murugesan
2020-05-28  1:56   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590582292-13314-1-git-send-email-sivaprak@codeaurora.org \
    --to=sivaprak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).