From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Ben Widawsky <ben.widawsky@intel.com>
Cc: <linux-cxl@vger.kernel.org>,
Chet Douglas <chet.r.douglas@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>
Subject: Re: [RFC PATCH v2 19/28] cxl/region: Introduce concept of region configuration
Date: Wed, 15 Dec 2021 17:47:22 +0000 [thread overview]
Message-ID: <20211215174722.00000861@huawei.com> (raw)
In-Reply-To: <20211022183709.1199701-20-ben.widawsky@intel.com>
On Fri, 22 Oct 2021 11:37:00 -0700
Ben Widawsky <ben.widawsky@intel.com> wrote:
> The region creation APIs create a vacant region. Configuring the region
> works in the same way as similar subsystems such as devdax. Sysfs attrs
> will be provided to allow userspace to configure the region. Finally
> once all configuration is complete, userspace may activate the region.
>
> Introduced here are the most basic attributes needed to configure a
> region. Details of these attribute are described in the ABI
> Documentation.
>
> A example is provided below:
>
> /sys/bus/cxl/devices/region0.0:0
> ├── interleave_granularity
> ├── interleave_ways
> ├── offset
> ├── size
> ├── subsystem -> ../../../../../../bus/cxl
> ├── target0
> ├── uevent
> └── uuid
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> ---
Not a proper review, but just one thing noticed whilst messing around with this.
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 588f0ca65bb2..3b0d74d4dd6c 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3,9 +3,12 @@
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/sizes.h>
> #include <linux/slab.h>
> +#include <linux/uuid.h>
> #include <linux/idr.h>
> #include <region.h>
> +#include <cxlmem.h>
> #include <cxl.h>
>
> +
> +static size_t set_targetN(struct cxl_region *region, const char *buf, int n,
> + size_t len)
> +{
> + struct device *memdev_dev;
> + struct cxl_memdev *cxlmd;
> +
> + device_lock(®ion->dev);
> +
> + if (len == 1 || region->targets[n])
> + remove_target(region, n);
> +
> + /* Remove target special case */
> + if (len == 1) {
> + device_unlock(®ion->dev);
> + return len;
> + }
> +
> + memdev_dev = bus_find_device_by_name(&cxl_bus_type, NULL, buf);
> + if (!memdev_dev)
device_unlock()?
> + return -ENOENT;
> +
> + /* reference to memdev held until target is unset or region goes away */
> +
> + cxlmd = to_cxl_memdev(memdev_dev);
> + region->targets[n] = cxlmd;
> +
> + device_unlock(®ion->dev);
> +
> + return len;
> +}
J
next prev parent reply other threads:[~2021-12-15 17:47 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-22 18:36 [RFC PATCH v2 00/28] CXL Region Creation / HDM decoder programming Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 01/28] cxl: Rename CXL_MEM to CXL_PCI Ben Widawsky
2021-10-29 20:15 ` Dan Williams
2021-10-29 21:20 ` Ben Widawsky
2021-10-29 21:39 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 02/28] cxl: Move register block enumeration to core Ben Widawsky
2021-10-29 20:23 ` Dan Williams
2021-10-29 21:23 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 03/28] cxl/acpi: Map component registers for Root Ports Ben Widawsky
2021-10-29 20:28 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 04/28] cxl: Add helper for new drivers Ben Widawsky
2021-10-29 20:30 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 05/28] cxl/core: Convert decoder range to resource Ben Widawsky
2021-10-29 20:50 ` Dan Williams
2021-10-29 21:26 ` Ben Widawsky
2021-10-29 22:22 ` Dan Williams
2021-10-29 22:37 ` Ben Widawsky
2021-11-01 14:33 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 06/28] cxl: Introduce endpoint decoders Ben Widawsky
2021-10-29 21:00 ` Dan Williams
2021-10-29 22:02 ` Ben Widawsky
2021-10-29 22:25 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 07/28] cxl/core: Move target population locking to caller Ben Widawsky
2021-10-29 23:03 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 08/28] cxl/port: Introduce a port driver Ben Widawsky
2021-10-30 1:37 ` Dan Williams
2021-10-31 17:53 ` Dan Williams
2021-10-31 18:10 ` Dan Williams
2021-11-01 17:36 ` Ben Widawsky
2021-11-01 17:53 ` Ben Widawsky
2021-11-01 17:54 ` Ben Widawsky
2021-11-02 3:31 ` Dan Williams
2021-11-02 16:27 ` Ben Widawsky
2021-11-02 17:21 ` Dan Williams
2021-11-02 16:58 ` Ben Widawsky
2021-11-04 19:10 ` Dan Williams
2021-11-04 19:49 ` Ben Widawsky
2021-11-04 20:04 ` Dan Williams
2021-11-04 21:25 ` Ben Widawsky
2021-11-04 16:37 ` Ben Widawsky
2021-11-04 19:17 ` Dan Williams
2021-11-04 19:46 ` Ben Widawsky
2021-11-04 20:00 ` Dan Williams
2021-11-04 21:26 ` Ben Widawsky
2021-11-03 15:18 ` Jonathan Cameron
2021-10-22 18:36 ` [RFC PATCH v2 09/28] cxl/acpi: Map single port host bridge component registers Ben Widawsky
2021-10-31 18:03 ` Dan Williams
2021-11-01 17:07 ` Ben Widawsky
2021-11-02 2:15 ` Dan Williams
2021-11-02 16:31 ` Ben Widawsky
2021-11-02 17:46 ` Dan Williams
2021-11-02 17:57 ` Ben Widawsky
2021-11-02 18:10 ` Dan Williams
2021-11-02 18:27 ` Ben Widawsky
2021-11-02 18:49 ` Dan Williams
2021-11-02 21:15 ` Ben Widawsky
2021-11-02 21:34 ` Dan Williams
2021-11-02 21:47 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 10/28] cxl/core: Store global list of root ports Ben Widawsky
2021-10-31 18:32 ` Dan Williams
2021-11-01 18:43 ` Ben Widawsky
2021-11-02 2:04 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 11/28] cxl/acpi: Rescan bus at probe completion Ben Widawsky
2021-10-31 19:25 ` Dan Williams
2021-11-01 18:56 ` Ben Widawsky
2021-11-01 21:45 ` Ben Widawsky
2021-11-02 1:56 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 12/28] cxl/core: Store component register base for memdevs Ben Widawsky
2021-10-31 20:13 ` Dan Williams
2021-11-01 21:50 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 13/28] cxl: Flesh out register names Ben Widawsky
2021-10-31 20:18 ` Dan Williams
2021-11-01 22:00 ` Ben Widawsky
2021-11-02 1:53 ` Dan Williams
2021-11-03 15:53 ` Jonathan Cameron
2021-11-03 16:03 ` Ben Widawsky
2021-11-03 16:42 ` Jonathan Cameron
2021-11-03 17:05 ` Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 14/28] cxl: Hide devm host for ports Ben Widawsky
2021-10-31 21:14 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 15/28] cxl/core: Introduce API to scan switch ports Ben Widawsky
2021-11-01 5:39 ` Dan Williams
2021-11-01 22:56 ` Ben Widawsky
2021-11-02 1:45 ` Dan Williams
2021-11-02 16:39 ` Ben Widawsky
2021-11-02 20:00 ` Dan Williams
2021-11-16 16:50 ` Ben Widawsky
2021-11-16 17:51 ` Dan Williams
2021-11-16 18:02 ` Ben Widawsky
2021-11-03 16:08 ` Jonathan Cameron
2021-11-10 17:49 ` Ben Widawsky
2021-11-10 18:10 ` Jonathan Cameron
2021-11-10 21:03 ` Dan Williams
2021-10-22 18:36 ` [RFC PATCH v2 16/28] cxl: Introduce cxl_mem driver Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 17/28] cxl: Disable switch hierarchies for now Ben Widawsky
2021-10-22 18:36 ` [RFC PATCH v2 18/28] cxl/region: Add region creation ABI Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 19/28] cxl/region: Introduce concept of region configuration Ben Widawsky
2021-12-15 17:47 ` Jonathan Cameron [this message]
2021-10-22 18:37 ` [RFC PATCH v2 20/28] cxl/region: Introduce a cxl_region driver Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 21/28] cxl/acpi: Handle address space allocation Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 22/28] cxl/region: Address " Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 23/28] cxl/region: Implement XHB verification Ben Widawsky
2022-01-06 16:55 ` Jonathan Cameron
2022-01-06 16:58 ` Ben Widawsky
2022-01-06 17:33 ` Jonathan Cameron
2022-01-06 18:10 ` Jonathan Cameron
2022-01-06 18:34 ` Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 24/28] cxl/region: HB port config verification Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 25/28] cxl/region: Record host bridge target list Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 26/28] cxl/mem: Store the endpoint's uport Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 27/28] cxl/region: Gather HDM decoder resources Ben Widawsky
2021-10-22 18:37 ` [RFC PATCH v2 28/28] cxl: Program decoders for regions Ben Widawsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211215174722.00000861@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=ben.widawsky@intel.com \
--cc=chet.r.douglas@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).