From: Ard Biesheuvel <ardb@kernel.org>
To: devicetree@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
Brijesh Singh <brijeshkumar.singh@amd.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v3 1/8] dt: amd-seattle: remove Husky platform
Date: Tue, 3 Dec 2019 15:22:59 +0000 [thread overview]
Message-ID: <20191203152306.7839-2-ardb@kernel.org> (raw)
In-Reply-To: <20191203152306.7839-1-ardb@kernel.org>
The Huskyboard never made it to production, and its successor the
Celloboard was only shipped in very limited quantities with ACPI
only firmware, so the historical significance of husky.dts is
highly questionable. Let's drop it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/husky.dts | 84 --------------------
2 files changed, 1 insertion(+), 86 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index 6a6093064a32..5e27bc0321e9 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
- amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
- husky.dtb
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
deleted file mode 100644
index 7acde34772cb..000000000000
--- a/arch/arm64/boot/dts/amd/husky.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
- * Note: Based-on AMD Seattle Rev.B0
- *
- * Copyright (C) 2015 Advanced Micro Devices, Inc.
- */
-
-/dts-v1/;
-
-/include/ "amd-seattle-soc.dtsi"
-
-/ {
- model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
- compatible = "amd,seattle-overdrive", "amd,seattle";
-
- chosen {
- stdout-path = &serial0;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-};
-
-&ccp0 {
- status = "ok";
- amd,zlib-support = <1>;
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
- status = "ok";
-};
-
-&gpio2 {
- status = "ok";
-};
-
-&gpio3 {
- status = "ok";
-};
-
-&gpio4 {
- status = "ok";
-};
-
-&i2c0 {
- status = "ok";
-};
-
-&i2c1 {
- status = "ok";
-};
-
-&pcie0 {
- status = "ok";
-};
-
-&spi0 {
- status = "ok";
-};
-
-&spi1 {
- status = "ok";
- sdcard0: sdcard@0 {
- compatible = "mmc-spi-slot";
- reg = <0>;
- spi-max-frequency = <20000000>;
- voltage-ranges = <3200 3400>;
- pl022,hierarchy = <0>;
- pl022,interface = <0>;
- pl022,com-mode = <0x0>;
- pl022,rx-level-trig = <0>;
- pl022,tx-level-trig = <0>;
- };
-};
-
-&smb0 {
- /include/ "amd-seattle-xgbe-b.dtsi"
-};
--
2.17.1
next prev parent reply other threads:[~2019-12-03 15:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-03 15:22 [PATCH v3 0/8] dt: amd-seattle: update SMMU, PCIe and cache descriptions Ard Biesheuvel
2019-12-03 15:22 ` Ard Biesheuvel [this message]
2019-12-03 15:23 ` [PATCH v3 2/8] dt: amd-seattle: remove Overdrive revision A0 support Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 3/8] dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 4/8] dt: amd-seattle: fix PCIe legacy interrupt routing Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 5/8] dt: amd-seattle: add a description of the PCIe SMMU Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 6/8] dt: amd-seattle: add description of the SATA/CCP SMMUs Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 7/8] dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0 Ard Biesheuvel
2019-12-03 15:23 ` [PATCH v3 8/8] dt: amd-seattle: add a description of the CPUs and caches Ard Biesheuvel
2020-01-28 10:23 ` [PATCH v3 0/8] dt: amd-seattle: update SMMU, PCIe and cache descriptions Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191203152306.7839-2-ardb@kernel.org \
--to=ardb@kernel.org \
--cc=brijeshkumar.singh@amd.com \
--cc=devicetree@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).