Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: "Jacopo Mondi" <jacopo+renesas@jmondi.org>,
	slongerbeam@gmail.com, linux-media@vger.kernel.org,
	laurent.pinchart@ideasonboard.com,
	linux-renesas-soc@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	linux-omap@vger.kernel.org, "Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@st.com>,
	linux-stm32@st-md-mailman.stormreply.com (moderated
	list:ARM/STM32 ARCHITECTURE),
	"Maxime Ripard" <mripard@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>, "Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Tero Kristo" <t-kristo@ti.com>, "Nishanth Menon" <nm@ti.com>
Subject: [PATCH 07/13] dt-bindings: media: ov5640: Remove clock-lanes
Date: Fri, 17 Jul 2020 15:28:53 +0200
Message-ID: <20200717132859.237120-8-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200717132859.237120-1-jacopo+renesas@jmondi.org>

The ov5640 does not support routing the clock signal to a different
lane, and the property has value fixed to 0.

Remove the property from the bindings and update its users
accordingly.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 Documentation/devicetree/bindings/media/i2c/ov5640.yaml | 6 ------
 arch/arm/boot/dts/dra72-evm-common.dtsi                 | 1 -
 arch/arm/boot/dts/dra76-evm.dts                         | 1 -
 arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi           | 1 -
 arch/arm/boot/dts/imx6qdl-icore.dtsi                    | 1 -
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi                | 1 -
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi                  | 1 -
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi               | 1 -
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts          | 1 -
 9 files changed, 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
index 8fd54575a1db..5e1662e848bd 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
@@ -76,9 +76,6 @@ properties:
           bus-type:
             enum: [4, 5]

-          clock-lanes:
-            const: 0
-
           data-lanes:
             description: |
               Should be set to <1> or <1 2> (one or two CSI-2 lanes supported).
@@ -125,7 +122,6 @@ properties:
                 required:
                   - remote-endpoint
                   - bus-type
-                  - clock-lanes
                   - data-lanes

           - if:
@@ -134,7 +130,6 @@ properties:
                   const: 5
             then:
               properties:
-                clock-lanes: false
                 data-lanes: false
               required:
                 - remote-endpoint
@@ -182,7 +177,6 @@ examples:
                 ov5640_to_mipi_csi2: endpoint {
                     remote-endpoint = <&mipi_csi2_from_ov5640>;
                     bus-type = <4>;
-                    clock-lanes = <0>;
                     data-lanes = <1 2>;
                 };
             };
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index aba7eb55525d..b5b31dc927d4 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -288,7 +288,6 @@ port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index ddf16e65ec7f..6fcb96abc41d 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -421,7 +421,6 @@ port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index dd5765778e87..a12d80a2403e 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -275,7 +275,6 @@ port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 2b1f275b8cc4..05bd332f527b 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -214,7 +214,6 @@ port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 5752abb48e68..5eb7fbf33069 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -383,7 +383,6 @@ port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 990f4cc345da..02f78b46a8fd 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -314,7 +314,6 @@ port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 5c79ad5e7b5d..8c24fd468a22 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -628,7 +628,6 @@ camera_rear@3b {
 		port {
 			ov5640_ep: endpoint {
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 				remote-endpoint = <&csiphy0_ep>;
 			};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 33f4eceffbe5..dd6a636ba3af 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -255,7 +255,6 @@ port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
 				bus-type = <4>;
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
 		};
--
2.27.0


  parent reply index

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:28 [PATCH 00/13] dt-bindings: media: ov5640: Convert to json-schema Jacopo Mondi
2020-07-17 13:28 ` [PATCH 01/13] " Jacopo Mondi
2020-07-17 19:28   ` Laurent Pinchart
2020-07-20 16:32   ` Rob Herring
2020-07-17 13:28 ` [PATCH 02/13] arm64: dts: qcom: apq8016-sbc: Fix CSI-2 lanes routing Jacopo Mondi
2020-07-17 19:35   ` Laurent Pinchart
2020-07-22  8:14     ` Loic Poulain
2020-07-22  8:34       ` Jacopo Mondi
2020-07-17 13:28 ` [PATCH 03/13] dt-bindings: media: ov5640: Do not limit rotation Jacopo Mondi
2020-07-17 19:38   ` Laurent Pinchart
2020-07-20 19:36     ` Rob Herring
2020-07-17 13:28 ` [PATCH 04/13] dt-bindings: media: ti,cal: Remove sensor from example Jacopo Mondi
2020-07-17 19:39   ` Laurent Pinchart
2020-07-23 20:57   ` Rob Herring
2020-07-17 13:28 ` [PATCH 05/13] dt-bindings: media: ov5640: Make bus-type mandatory Jacopo Mondi
2020-07-17 15:48   ` Fabio Estevam
2020-07-17 19:48   ` Laurent Pinchart
2020-07-20 19:45   ` Rob Herring
2020-07-17 13:28 ` [PATCH 06/13] dt-bindings: media: ov5640: Require ep properties Jacopo Mondi
2020-07-17 19:50   ` Laurent Pinchart
2020-07-17 13:28 ` Jacopo Mondi [this message]
2020-07-17 20:48   ` [PATCH 07/13] dt-bindings: media: ov5640: Remove clock-lanes Laurent Pinchart
2020-07-20 19:47   ` Rob Herring
2020-07-17 13:28 ` [PATCH 08/13] dt-bindings: media: ov5640: Remove data-shift Jacopo Mondi
2020-07-17 20:57   ` Laurent Pinchart
2020-07-23 22:22     ` Sakari Ailus
2020-07-23 23:15       ` Laurent Pinchart
2020-07-25 21:18         ` Sakari Ailus
2020-07-25 21:31           ` Laurent Pinchart
2020-07-29 14:29             ` Sakari Ailus
2020-07-29 14:46               ` Laurent Pinchart
2020-07-30 16:22                 ` Sakari Ailus
2020-07-30 16:32                   ` Laurent Pinchart
2020-07-30 16:43                     ` Sakari Ailus
2020-07-17 13:28 ` [PATCH 09/13] dt-bindings: media: ov5640: Add default for synch signals Jacopo Mondi
2020-07-17 20:59   ` Laurent Pinchart
2020-07-20 19:50     ` Rob Herring
2020-07-17 13:28 ` [PATCH 10/13] dt-bindings: media: ov5640: Demote DVP required properties Jacopo Mondi
2020-07-17 21:00   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 11/13] media: i2c: ov5640: Initialize DVP polarities as default Jacopo Mondi
2020-07-17 21:02   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 12/13] MAINTAINERS: ov5640: Add bindings file Jacopo Mondi
2020-07-17 21:03   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 13/13] dt-bindings: media: ov5640: Add myself as co-maintainer Jacopo Mondi
2020-07-17 21:03   ` Laurent Pinchart
2020-07-17 19:31 ` [PATCH 00/13] dt-bindings: media: ov5640: Convert to json-schema Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717132859.237120-8-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=agross@kernel.org \
    --cc=alexandre.torgue@st.com \
    --cc=bcousson@baylibre.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mripard@kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=slongerbeam@gmail.com \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git