Re: [PATCH v2 0/6] clk: Ingenic JZ4760(B) support

[周琰杰 <zhouyanjie@wanyeetech.com>]

Hi,

A gentle ping :)

Here are some new patches that need to be based on this series.

Thanks and best regards!

于 Sun, 30 May 2021 17:49:17 +0100
Paul Cercueil <paul@crapouillou.net> 写道:

> Hi,
> 
> Here is (finally) my v2 of the JZ4760(B) patchset.
> 
> Patches 1-5 are the exact same as in v1.
> 
> Patch 6's algorithm was updated with Zhou's feedback.
> 
> Cheers,
> -Paul
> 
> Paul Cercueil (6):
>   dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
>   clk: Support bypassing dividers
>   clk: ingenic: Read bypass register only when there is one
>   clk: ingenic: Remove pll_info.no_bypass_bit
>   clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
>   clk: ingenic: Add support for the JZ4760
> 
>  .../bindings/clock/ingenic,cgu.yaml           |   4 +
>  drivers/clk/ingenic/Kconfig                   |  10 +
>  drivers/clk/ingenic/Makefile                  |   1 +
>  drivers/clk/ingenic/cgu.c                     |  92 ++--
>  drivers/clk/ingenic/cgu.h                     |  12 +-
>  drivers/clk/ingenic/jz4725b-cgu.c             |  12 +-
>  drivers/clk/ingenic/jz4740-cgu.c              |  12 +-
>  drivers/clk/ingenic/jz4760-cgu.c              | 428
> ++++++++++++++++++ drivers/clk/ingenic/jz4770-cgu.c              |
> 15 +- drivers/clk/ingenic/tcu.c                     |   2 +
>  include/dt-bindings/clock/jz4760-cgu.h        |  54 +++
>  11 files changed, 586 insertions(+), 56 deletions(-)
>  create mode 100644 drivers/clk/ingenic/jz4760-cgu.c
>  create mode 100644 include/dt-bindings/clock/jz4760-cgu.h
>