Linux-EDAC Archive on lore.kernel.org
 help / color / Atom feed
From: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
To: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bp@alien8.de" <bp@alien8.de>
Subject: [PATCH 4/8] EDAC/amd64: Initialize DIMM info for systems with more than two channels
Date: Fri, 31 May 2019 23:45:13 +0000
Message-ID: <20190531234501.32826-5-Yazen.Ghannam@amd.com> (raw)
In-Reply-To: <20190531234501.32826-1-Yazen.Ghannam@amd.com>

From: Yazen Ghannam <yazen.ghannam@amd.com>

Currently, the DIMM info for AMD Family 17h systems is initialized in
init_csrows(). This function is shared with legacy systems, and it has a
limit of two channel support.

This prevents initialization of the DIMM info for a number of ranks, so
there will be missing ranks in the EDAC sysfs.

Create a new init_csrows_df() for Family17h+ and revert init_csrows()
back to pre-Family17h support.

Loop over all channels in the new function in order to support systems
with more than two channels.

Fixes: bdcee7747f5c ("EDAC/amd64: Support more than two Unified Memory Controllers")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
 drivers/edac/amd64_edac.c | 63 ++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 14 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 125d6e2a828e..d0926b181c7c 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2837,6 +2837,46 @@ static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig)
 	return nr_pages;
 }
 
+static int init_csrows_df(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	enum edac_type edac_mode = EDAC_NONE;
+	enum dev_type dev_type = DEV_UNKNOWN;
+	struct dimm_info *dimm;
+	int empty = 1;
+	u8 umc, cs;
+
+	if (mci->edac_ctl_cap & EDAC_FLAG_S16ECD16ED) {
+		edac_mode = EDAC_S16ECD16ED;
+		dev_type = DEV_X16;
+	} else if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) {
+		edac_mode = EDAC_S4ECD4ED;
+		dev_type = DEV_X4;
+	} else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) {
+		edac_mode = EDAC_SECDED;
+	}
+
+	for_each_umc(umc) {
+		for_each_chip_select(cs, umc, pvt) {
+			if (!csrow_enabled(cs, umc, pvt))
+				continue;
+
+			empty = 0;
+			dimm = mci->csrows[cs]->channels[umc]->dimm;
+
+			edac_dbg(1, "MC node: %d, csrow: %d\n",
+					pvt->mc_node_id, cs);
+
+			dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs);
+			dimm->mtype = pvt->dram_type;
+			dimm->edac_mode = edac_mode;
+			dimm->dtype = dev_type;
+		}
+	}
+
+	return empty;
+}
+
 /*
  * Initialize the array of csrow attribute instances, based on the values
  * from pci config hardware registers.
@@ -2851,15 +2891,16 @@ static int init_csrows(struct mem_ctl_info *mci)
 	int nr_pages = 0;
 	u32 val;
 
-	if (!pvt->umc) {
-		amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
+	if (pvt->umc)
+		return init_csrows_df(mci);
+
+	amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
 
-		pvt->nbcfg = val;
+	pvt->nbcfg = val;
 
-		edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
-			 pvt->mc_node_id, val,
-			 !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
-	}
+	edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+		 pvt->mc_node_id, val,
+		 !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
 
 	/*
 	 * We iterate over DCT0 here but we look at DCT1 in parallel, if needed.
@@ -2896,13 +2937,7 @@ static int init_csrows(struct mem_ctl_info *mci)
 		edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
 
 		/* Determine DIMM ECC mode: */
-		if (pvt->umc) {
-			if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED)
-				edac_mode = EDAC_S4ECD4ED;
-			else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED)
-				edac_mode = EDAC_SECDED;
-
-		} else if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
+		if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
 			edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL)
 					? EDAC_S4ECD4ED
 					: EDAC_SECDED;
-- 
2.17.1


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-31 23:45 [PATCH 0/8] AMD64 EDAC fixes for v5.2 Ghannam, Yazen
2019-05-31 23:45 ` [PATCH 1/8] EDAC/amd64: Fix number of DIMMs and Chip Select bases/masks on Family17h Ghannam, Yazen
2019-06-13 13:58   ` Borislav Petkov
2019-06-13 21:00     ` Ghannam, Yazen
2019-06-17 13:37       ` Borislav Petkov
2019-05-31 23:45 ` [PATCH 2/8] EDAC/amd64: Support more than two controllers for chip selects handling Ghannam, Yazen
2019-06-13 14:17   ` Borislav Petkov
2019-06-13 20:58     ` Ghannam, Yazen
2019-06-13 22:22       ` Borislav Petkov
2019-06-14 14:14         ` Ghannam, Yazen
2019-05-31 23:45 ` [PATCH 3/8] EDAC/amd64: Recognize DRAM device type with EDAC_CTL_CAP Ghannam, Yazen
2019-05-31 23:45 ` [PATCH 5/8] EDAC/amd64: Find Chip Select memory size using Address Mask Ghannam, Yazen
2019-05-31 23:45 ` Ghannam, Yazen [this message]
2019-05-31 23:45 ` [PATCH 7/8] EDAC/amd64: Cache secondary Chip Select registers Ghannam, Yazen
2019-05-31 23:45 ` [PATCH 6/8] EDAC/amd64: Decode syndrome before translating address Ghannam, Yazen
2019-05-31 23:45 ` [PATCH 8/8] EDAC/amd64: Support Asymmetric Dual-Rank DIMMs Ghannam, Yazen

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190531234501.32826-5-Yazen.Ghannam@amd.com \
    --to=yazen.ghannam@amd.com \
    --cc=bp@alien8.de \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-EDAC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-edac/0 linux-edac/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-edac linux-edac/ https://lore.kernel.org/linux-edac \
		linux-edac@vger.kernel.org
	public-inbox-index linux-edac

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-edac


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git