* [PATCH v2] dt-bindings: hwmon: Add missing documentation for lm75
@ 2019-02-12 11:38 Jagan Teki
0 siblings, 0 replies; 1+ messages in thread
From: Jagan Teki @ 2019-02-12 11:38 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Mark Rutland
Cc: linux-hwmon, devicetree, linux-kernel, Jagan Teki
Add missing dt-binding documentation for lm75 hwmon sensor.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Add all compatible nodes available in lm75.
.../devicetree/bindings/hwmon/lm75.txt | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm75.txt
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
new file mode 100644
index 000000000000..12d8cf7cf592
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.txt
@@ -0,0 +1,37 @@
+*LM75 hwmon sensor.
+
+Required properties:
+- compatible: manufacturer and chip name, one of
+ "adi,adt75",
+ "dallas,ds1775",
+ "dallas,ds75",
+ "dallas,ds7505",
+ "gmt,g751",
+ "national,lm75",
+ "national,lm75a",
+ "national,lm75b",
+ "maxim,max6625",
+ "maxim,max6626",
+ "maxim,max31725",
+ "maxim,max31726",
+ "maxim,mcp980x",
+ "st,stds75",
+ "st,stlm75",
+ "microchip,tcn75",
+ "ti,tmp100",
+ "ti,tmp101",
+ "ti,tmp105",
+ "ti,tmp112",
+ "ti,tmp175",
+ "ti,tmp275",
+ "ti,tmp75",
+ "ti,tmp75c",
+
+- reg: I2C bus address of the device
+
+Example:
+
+sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply [flat|nested] 1+ messages in thread
only message in thread, back to index
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-12 11:38 [PATCH v2] dt-bindings: hwmon: Add missing documentation for lm75 Jagan Teki
Linux-Hwmon Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
public-inbox-index linux-hwmon
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon
AGPL code for this site: git clone https://public-inbox.org/ public-inbox