Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert
@ 2020-02-27  8:46 Chris Packham
  2020-02-27  8:46 ` [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding Chris Packham
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

I've picked up Logan's changes[1] and am combining them with an old series of
mine[2] to hopefully get them both over the line.

[1] - https://lore.kernel.org/linux-hwmon/20191219033213.30364-1-logan.shaw@alliedtelesis.co.nz/
[2] - https://lore.kernel.org/linux-hwmon/20181107040010.27436-1-chris.packham@alliedtelesis.co.nz/

Chris Packham (2):
  dt-bindings: hwmon: Document adt7475 pwm-active-state property
  hwmon: (adt7475) Add support for inverting pwm output

Logan Shaw (3):
  dt-bindings: hwmon: Document adt7475 binding
  dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  hwmon: (adt7475) Add attenuator bypass support

 .../devicetree/bindings/hwmon/adt7475.yaml    | 84 ++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |  8 --
 drivers/hwmon/adt7475.c                       | 95 ++++++++++++++++++-
 3 files changed, 176 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml

-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding
  2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
@ 2020-02-27  8:46 ` Chris Packham
  2020-03-03 21:00   ` Guenter Roeck
  2020-02-27  8:46 ` [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property Chris Packham
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Add binding for adi,adt7475 and variants.
Remove from trivial-devices.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    Changes in v5:
    - add review from Rob
    
    Changes in v4:
    - None
    
    Changes in v3:
    - split conversion to yaml from addition of new properties

 .../devicetree/bindings/hwmon/adt7475.yaml    | 57 +++++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |  8 ---
 2 files changed, 57 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 000000000000..2252499ea201
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+
+description: |
+  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+  PWN fan controllers.
+
+  They support monitoring and controlling up to four fans (the ADT7490 can only
+  control up to three). They support reading a single on chip temperature
+  sensor and two off chip temperature sensors (the ADT7490 additionally
+  supports measuring up to three current external temperature sensors with
+  series resistance cancellation (SRC)).
+
+  Datasheets:
+  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+  Description taken from onsemiconductors specification sheets, with minor
+  rephrasing.
+
+properties:
+  compatible:
+    enum:
+      - adi,adt7473
+      - adi,adt7475
+      - adi,adt7476
+      - adi,adt7490
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hwmon@2e {
+        compatible = "adi,adt7476";
+        reg = <0x2e>;
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 978de7d37c66..57173ec41c30 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -34,14 +34,6 @@ properties:
           - adi,adt7461
             # +/-1C TDM Extended Temp Range I.C
           - adt7461
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7473
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7475
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7476
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7490
             # Three-Axis Digital Accelerometer
           - adi,adxl345
             # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
  2020-02-27  8:46 ` [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding Chris Packham
@ 2020-02-27  8:46 ` Chris Packham
  2020-03-03 21:00   ` Guenter Roeck
  2020-02-27  8:46 ` [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property Chris Packham
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Add documentation for the bypass-attenuator-in[0-4] property.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    Changes in v5:
    - add review from Rob
    
    Changes in v4:
    - use $ref uint32 and enum
    - add 'adi' vendor prefix
    
    Changes in v3:
    - separated addition of new properties from conversion to yaml

 .../devicetree/bindings/hwmon/adt7475.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 2252499ea201..e40612ee075f 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,6 +39,17 @@ properties:
   reg:
     maxItems: 1
 
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    allOf:
+     - $ref: /schemas/types.yaml#/definitions/uint32
+     - enum: [0, 1]
+
 required:
   - compatible
   - reg
@@ -52,6 +63,8 @@ examples:
       hwmon@2e {
         compatible = "adi,adt7476";
         reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
       };
     };
 
-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property
  2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
  2020-02-27  8:46 ` [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding Chris Packham
  2020-02-27  8:46 ` [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property Chris Packham
@ 2020-02-27  8:46 ` Chris Packham
  2020-03-03  1:25   ` Rob Herring
  2020-03-03 21:01   ` Guenter Roeck
  2020-02-27  8:46 ` [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support Chris Packham
  2020-02-27  8:46 ` [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output Chris Packham
  4 siblings, 2 replies; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

Add binding information for the adi,pwm-active-state property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v5:
    - change to adi,pwm-active-state
    - uint32 array
    
    Changes in v4:
    - use $ref uint32 and enum
    - add adi vendor prefix
    
    Cahnges in v3:
    - new

 .../devicetree/bindings/hwmon/adt7475.yaml         | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index e40612ee075f..76985034ea73 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -50,6 +50,19 @@ patternProperties:
      - $ref: /schemas/types.yaml#/definitions/uint32
      - enum: [0, 1]
 
+  "^adi,pwm-active-state$":
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 3
+        maxItems: 3
+        items:
+          enum: [0, 1]
+          default: 1
+
 required:
   - compatible
   - reg
@@ -65,6 +78,7 @@ examples:
         reg = <0x2e>;
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
       };
     };
 
-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support
  2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
                   ` (2 preceding siblings ...)
  2020-02-27  8:46 ` [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property Chris Packham
@ 2020-02-27  8:46 ` Chris Packham
  2020-03-03 21:05   ` Guenter Roeck
  2020-02-27  8:46 ` [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output Chris Packham
  4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Added support for reading DTS properties to set attenuators on
device probe for the ADT7473, ADT7475, ADT7476, and ADT7490.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v5:
    - None
    
    Changes in v4:
    - use vendor prefix for new property
    
    Changes in v3:
    - move config2 to struct adt7475_data
    - set_property_bit() new helper function to set/clear bit based on dt
      property value.
    - rename to use load_attenuators()

 drivers/hwmon/adt7475.c | 61 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 58 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 01c2eeb02aa9..3649b18359dc 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -19,6 +19,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/util_macros.h>
 
 /* Indexes for the sysfs hooks */
@@ -193,6 +194,7 @@ struct adt7475_data {
 	unsigned long measure_updated;
 	bool valid;
 
+	u8 config2;
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
@@ -1458,6 +1460,55 @@ static int adt7475_update_limits(struct i2c_client *client)
 	return 0;
 }
 
+static int set_property_bit(const struct i2c_client *client, char *property,
+			  u8 *config, u8 bit_index)
+{
+	u32 prop_value = 0;
+	int ret = of_property_read_u32(client->dev.of_node, property,
+					&prop_value);
+
+	if (!ret) {
+		if (prop_value)
+			*config |= (1 << bit_index);
+		else
+			*config &= ~(1 << bit_index);
+	}
+
+	return ret;
+}
+
+static int load_attenuators(const struct i2c_client *client, int chip,
+			    struct adt7475_data *data)
+{
+	int ret;
+
+	if (chip == adt7476 || chip == adt7490) {
+		set_property_bit(client, "adi,bypass-attenuator-in0",
+				 &data->config4, 4);
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config4, 5);
+		set_property_bit(client, "adi,bypass-attenuator-in3",
+				 &data->config4, 6);
+		set_property_bit(client, "adi,bypass-attenuator-in4",
+				 &data->config4, 7);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
+						data->config4);
+		if (ret < 0)
+			return ret;
+	} else if (chip == adt7473 || chip == adt7475) {
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config2, 5);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
+						data->config2);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1472,7 +1523,7 @@ static int adt7475_probe(struct i2c_client *client,
 	struct adt7475_data *data;
 	struct device *hwmon_dev;
 	int i, ret = 0, revision, group_num = 0;
-	u8 config2, config3;
+	u8 config3;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1546,8 +1597,12 @@ static int adt7475_probe(struct i2c_client *client,
 	}
 
 	/* Voltage attenuators can be bypassed, globally or individually */
-	config2 = adt7475_read(REG_CONFIG2);
-	if (config2 & CONFIG2_ATTN) {
+	data->config2 = adt7475_read(REG_CONFIG2);
+	ret = load_attenuators(client, chip, data);
+	if (ret)
+		dev_err(&client->dev, "Error configuring attenuator bypass\n");
+
+	if (data->config2 & CONFIG2_ATTN) {
 		data->bypass_attn = (0x3 << 3) | 0x3;
 	} else {
 		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output
  2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
                   ` (3 preceding siblings ...)
  2020-02-27  8:46 ` [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support Chris Packham
@ 2020-02-27  8:46 ` Chris Packham
  2020-03-03 21:08   ` Guenter Roeck
  4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2020-02-27  8:46 UTC (permalink / raw)
  To: jdelvare, linux, robh+dt, mark.rutland
  Cc: logan.shaw, linux-hwmon, devicetree, linux-kernel, Chris Packham

Add a "adi,pwm-active-state" device-tree property to allow hardware
designs to use inverted logic on the PWM output.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v5:
    - change to adi,pwm-active-state
    - uint32 array
    
    Changes in v4:
    - use vendor prefix for new property
    
    Changes in v3:
    - New

 drivers/hwmon/adt7475.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 3649b18359dc..142a4fec688b 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -1509,6 +1509,36 @@ static int load_attenuators(const struct i2c_client *client, int chip,
 	return 0;
 }
 
+static int adt7475_set_pwm_polarity(struct i2c_client *client)
+{
+	u32 states[ADT7475_PWM_COUNT];
+	int ret, i;
+	u8 val;
+
+	ret = of_property_read_u32_array(client->dev.of_node,
+					 "adi,pwm-active-state", states,
+					 ARRAY_SIZE(states));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+		ret = adt7475_read(PWM_CONFIG_REG(i));
+		if (ret < 0)
+			return ret;
+		val = ret;
+		if (states[i])
+			val &= ~BIT(4);
+		else
+			val |= BIT(4);
+
+		ret = i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(i), val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1617,6 +1647,10 @@ static int adt7475_probe(struct i2c_client *client,
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
 		adt7475_read_pwm(client, i);
 
+	ret = adt7475_set_pwm_polarity(client);
+	if (ret && ret != -EINVAL)
+		dev_err(&client->dev, "Error configuring pwm polarity\n");
+
 	/* Start monitoring */
 	switch (chip) {
 	case adt7475:
-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property
  2020-02-27  8:46 ` [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property Chris Packham
@ 2020-03-03  1:25   ` Rob Herring
  2020-03-03 21:01   ` Guenter Roeck
  1 sibling, 0 replies; 12+ messages in thread
From: Rob Herring @ 2020-03-03  1:25 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, linux, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel, Chris Packham

On Thu, 27 Feb 2020 21:46:40 +1300, Chris Packham wrote:
> 
> Add binding information for the adi,pwm-active-state property.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v5:
>     - change to adi,pwm-active-state
>     - uint32 array
>     
>     Changes in v4:
>     - use $ref uint32 and enum
>     - add adi vendor prefix
>     
>     Cahnges in v3:
>     - new
> 
>  .../devicetree/bindings/hwmon/adt7475.yaml         | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding
  2020-02-27  8:46 ` [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding Chris Packham
@ 2020-03-03 21:00   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-03-03 21:00 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel

On Thu, Feb 27, 2020 at 09:46:38PM +1300, Chris Packham wrote:
> From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> 
> Add binding for adi,adt7475 and variants.
> Remove from trivial-devices.
> 
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v5:
>     - add review from Rob
>     
>     Changes in v4:
>     - None
>     
>     Changes in v3:
>     - split conversion to yaml from addition of new properties
> 
>  .../devicetree/bindings/hwmon/adt7475.yaml    | 57 +++++++++++++++++++
>  .../devicetree/bindings/trivial-devices.yaml  |  8 ---
>  2 files changed, 57 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> new file mode 100644
> index 000000000000..2252499ea201
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/adt7475.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADT7475 hwmon sensor
> +
> +maintainers:
> +  - Jean Delvare <jdelvare@suse.com>
> +
> +description: |
> +  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
> +  PWN fan controllers.
> +
> +  They support monitoring and controlling up to four fans (the ADT7490 can only
> +  control up to three). They support reading a single on chip temperature
> +  sensor and two off chip temperature sensors (the ADT7490 additionally
> +  supports measuring up to three current external temperature sensors with
> +  series resistance cancellation (SRC)).
> +
> +  Datasheets:
> +  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
> +  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
> +  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
> +  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
> +
> +  Description taken from onsemiconductors specification sheets, with minor
> +  rephrasing.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adt7473
> +      - adi,adt7475
> +      - adi,adt7476
> +      - adi,adt7490
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      hwmon@2e {
> +        compatible = "adi,adt7476";
> +        reg = <0x2e>;
> +      };
> +    };
> +
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 978de7d37c66..57173ec41c30 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -34,14 +34,6 @@ properties:
>            - adi,adt7461
>              # +/-1C TDM Extended Temp Range I.C
>            - adt7461
> -            # +/-1C TDM Extended Temp Range I.C
> -          - adi,adt7473
> -            # +/-1C TDM Extended Temp Range I.C
> -          - adi,adt7475
> -            # +/-1C TDM Extended Temp Range I.C
> -          - adi,adt7476
> -            # +/-1C TDM Extended Temp Range I.C
> -          - adi,adt7490
>              # Three-Axis Digital Accelerometer
>            - adi,adxl345
>              # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  2020-02-27  8:46 ` [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property Chris Packham
@ 2020-03-03 21:00   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-03-03 21:00 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel

On Thu, Feb 27, 2020 at 09:46:39PM +1300, Chris Packham wrote:
> From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> 
> Add documentation for the bypass-attenuator-in[0-4] property.
> 
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v5:
>     - add review from Rob
>     
>     Changes in v4:
>     - use $ref uint32 and enum
>     - add 'adi' vendor prefix
>     
>     Changes in v3:
>     - separated addition of new properties from conversion to yaml
> 
>  .../devicetree/bindings/hwmon/adt7475.yaml          | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> index 2252499ea201..e40612ee075f 100644
> --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> @@ -39,6 +39,17 @@ properties:
>    reg:
>      maxItems: 1
>  
> +patternProperties:
> +  "^adi,bypass-attenuator-in[0-4]$":
> +    description: |
> +      Configures bypassing the individual voltage input attenuator. If
> +      set to 1 the attenuator is bypassed if set to 0 the attenuator is
> +      not bypassed. If the property is absent then the attenuator
> +      retains it's configuration from the bios/bootloader.
> +    allOf:
> +     - $ref: /schemas/types.yaml#/definitions/uint32
> +     - enum: [0, 1]
> +
>  required:
>    - compatible
>    - reg
> @@ -52,6 +63,8 @@ examples:
>        hwmon@2e {
>          compatible = "adi,adt7476";
>          reg = <0x2e>;
> +        adi,bypass-attenuator-in0 = <1>;
> +        adi,bypass-attenuator-in1 = <0>;
>        };
>      };
>  

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property
  2020-02-27  8:46 ` [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property Chris Packham
  2020-03-03  1:25   ` Rob Herring
@ 2020-03-03 21:01   ` Guenter Roeck
  1 sibling, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-03-03 21:01 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel

On Thu, Feb 27, 2020 at 09:46:40PM +1300, Chris Packham wrote:
> Add binding information for the adi,pwm-active-state property.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v5:
>     - change to adi,pwm-active-state
>     - uint32 array
>     
>     Changes in v4:
>     - use $ref uint32 and enum
>     - add adi vendor prefix
>     
>     Cahnges in v3:
>     - new
> 
>  .../devicetree/bindings/hwmon/adt7475.yaml         | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> index e40612ee075f..76985034ea73 100644
> --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> @@ -50,6 +50,19 @@ patternProperties:
>       - $ref: /schemas/types.yaml#/definitions/uint32
>       - enum: [0, 1]
>  
> +  "^adi,pwm-active-state$":
> +    description: |
> +      Integer array, represents the active state of the pwm outputs If set to 0
> +      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
> +      uses a logic high output for 100% duty cycle.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - minItems: 3
> +        maxItems: 3
> +        items:
> +          enum: [0, 1]
> +          default: 1
> +
>  required:
>    - compatible
>    - reg
> @@ -65,6 +78,7 @@ examples:
>          reg = <0x2e>;
>          adi,bypass-attenuator-in0 = <1>;
>          adi,bypass-attenuator-in1 = <0>;
> +        adi,pwm-active-state = <1 0 1>;
>        };
>      };
>  

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support
  2020-02-27  8:46 ` [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support Chris Packham
@ 2020-03-03 21:05   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-03-03 21:05 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel

On Thu, Feb 27, 2020 at 09:46:41PM +1300, Chris Packham wrote:
> From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> 
> Added support for reading DTS properties to set attenuators on
> device probe for the ADT7473, ADT7475, ADT7476, and ADT7490.
> 
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied, with two small changes; see inline.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v5:
>     - None
>     
>     Changes in v4:
>     - use vendor prefix for new property
>     
>     Changes in v3:
>     - move config2 to struct adt7475_data
>     - set_property_bit() new helper function to set/clear bit based on dt
>       property value.
>     - rename to use load_attenuators()
> 
>  drivers/hwmon/adt7475.c | 61 +++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 58 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 01c2eeb02aa9..3649b18359dc 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -19,6 +19,7 @@
>  #include <linux/hwmon-vid.h>
>  #include <linux/err.h>
>  #include <linux/jiffies.h>
> +#include <linux/of.h>
>  #include <linux/util_macros.h>
>  
>  /* Indexes for the sysfs hooks */
> @@ -193,6 +194,7 @@ struct adt7475_data {
>  	unsigned long measure_updated;
>  	bool valid;
>  
> +	u8 config2;
>  	u8 config4;
>  	u8 config5;
>  	u8 has_voltage;
> @@ -1458,6 +1460,55 @@ static int adt7475_update_limits(struct i2c_client *client)
>  	return 0;
>  }
>  
> +static int set_property_bit(const struct i2c_client *client, char *property,
> +			  u8 *config, u8 bit_index)

Aligned continuation line with '('.

> +{
> +	u32 prop_value = 0;
> +	int ret = of_property_read_u32(client->dev.of_node, property,
> +					&prop_value);
> +
> +	if (!ret) {
> +		if (prop_value)
> +			*config |= (1 << bit_index);
> +		else
> +			*config &= ~(1 << bit_index);
> +	}
> +
> +	return ret;
> +}
> +
> +static int load_attenuators(const struct i2c_client *client, int chip,
> +			    struct adt7475_data *data)
> +{
> +	int ret;
> +
> +	if (chip == adt7476 || chip == adt7490) {
> +		set_property_bit(client, "adi,bypass-attenuator-in0",
> +				 &data->config4, 4);
> +		set_property_bit(client, "adi,bypass-attenuator-in1",
> +				 &data->config4, 5);
> +		set_property_bit(client, "adi,bypass-attenuator-in3",
> +				 &data->config4, 6);
> +		set_property_bit(client, "adi,bypass-attenuator-in4",
> +				 &data->config4, 7);
> +
> +		ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
> +						data->config4);
> +		if (ret < 0)
> +			return ret;
> +	} else if (chip == adt7473 || chip == adt7475) {
> +		set_property_bit(client, "adi,bypass-attenuator-in1",
> +				 &data->config2, 5);
> +
> +		ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
> +						data->config2);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static int adt7475_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *id)
>  {
> @@ -1472,7 +1523,7 @@ static int adt7475_probe(struct i2c_client *client,
>  	struct adt7475_data *data;
>  	struct device *hwmon_dev;
>  	int i, ret = 0, revision, group_num = 0;
> -	u8 config2, config3;
> +	u8 config3;
>  
>  	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
>  	if (data == NULL)
> @@ -1546,8 +1597,12 @@ static int adt7475_probe(struct i2c_client *client,
>  	}
>  
>  	/* Voltage attenuators can be bypassed, globally or individually */
> -	config2 = adt7475_read(REG_CONFIG2);
> -	if (config2 & CONFIG2_ATTN) {
> +	data->config2 = adt7475_read(REG_CONFIG2);
> +	ret = load_attenuators(client, chip, data);
> +	if (ret)
> +		dev_err(&client->dev, "Error configuring attenuator bypass\n");

I would expect this to be a dev_warn() or to abort and return an error.
Assuming you want the code to continue in this case, I changed the message
to dev_warn(). If that is not what you want, please let me know.

> +
> +	if (data->config2 & CONFIG2_ATTN) {
>  		data->bypass_attn = (0x3 << 3) | 0x3;
>  	} else {
>  		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output
  2020-02-27  8:46 ` [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output Chris Packham
@ 2020-03-03 21:08   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2020-03-03 21:08 UTC (permalink / raw)
  To: Chris Packham
  Cc: jdelvare, robh+dt, mark.rutland, logan.shaw, linux-hwmon,
	devicetree, linux-kernel

On Thu, Feb 27, 2020 at 09:46:42PM +1300, Chris Packham wrote:
> Add a "adi,pwm-active-state" device-tree property to allow hardware
> designs to use inverted logic on the PWM output.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied, with change described below. Please let me know if ignoring
the error is not what you wanted.

Thanks,
Guenter

> ---
> 
> Notes:
>     Changes in v5:
>     - change to adi,pwm-active-state
>     - uint32 array
>     
>     Changes in v4:
>     - use vendor prefix for new property
>     
>     Changes in v3:
>     - New
> 
>  drivers/hwmon/adt7475.c | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 3649b18359dc..142a4fec688b 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -1509,6 +1509,36 @@ static int load_attenuators(const struct i2c_client *client, int chip,
>  	return 0;
>  }
>  
> +static int adt7475_set_pwm_polarity(struct i2c_client *client)
> +{
> +	u32 states[ADT7475_PWM_COUNT];
> +	int ret, i;
> +	u8 val;
> +
> +	ret = of_property_read_u32_array(client->dev.of_node,
> +					 "adi,pwm-active-state", states,
> +					 ARRAY_SIZE(states));
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < ADT7475_PWM_COUNT; i++) {
> +		ret = adt7475_read(PWM_CONFIG_REG(i));
> +		if (ret < 0)
> +			return ret;
> +		val = ret;
> +		if (states[i])
> +			val &= ~BIT(4);
> +		else
> +			val |= BIT(4);
> +
> +		ret = i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(i), val);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static int adt7475_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *id)
>  {
> @@ -1617,6 +1647,10 @@ static int adt7475_probe(struct i2c_client *client,
>  	for (i = 0; i < ADT7475_PWM_COUNT; i++)
>  		adt7475_read_pwm(client, i);
>  
> +	ret = adt7475_set_pwm_polarity(client);
> +	if (ret && ret != -EINVAL)
> +		dev_err(&client->dev, "Error configuring pwm polarity\n");

		dev_err -> dev_warn

> +
>  	/* Start monitoring */
>  	switch (chip) {
>  	case adt7475:

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-27  8:46 [PATCH v5 0/5] hwmon: (adt7475) attenuator bypass and pwm invert Chris Packham
2020-02-27  8:46 ` [PATCH v5 1/5] dt-bindings: hwmon: Document adt7475 binding Chris Packham
2020-03-03 21:00   ` Guenter Roeck
2020-02-27  8:46 ` [PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property Chris Packham
2020-03-03 21:00   ` Guenter Roeck
2020-02-27  8:46 ` [PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property Chris Packham
2020-03-03  1:25   ` Rob Herring
2020-03-03 21:01   ` Guenter Roeck
2020-02-27  8:46 ` [PATCH v5 4/5] hwmon: (adt7475) Add attenuator bypass support Chris Packham
2020-03-03 21:05   ` Guenter Roeck
2020-02-27  8:46 ` [PATCH v5 5/5] hwmon: (adt7475) Add support for inverting pwm output Chris Packham
2020-03-03 21:08   ` Guenter Roeck

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org
	public-inbox-index linux-hwmon

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git