Linux-i3c Archive on lore.kernel.org
 help / color / Atom feed
From: Przemyslaw Gaj <pgaj@cadence.com>
To: Vitor Soares <vitor.soares@synopsys.com>
Cc: "linux-i3c@lists.infradead.org" <linux-i3c@lists.infradead.org>,
	"agolec@cadence.com" <agolec@cadence.com>,
	"rafalc@cadence.com" <rafalc@cadence.com>,
	"bbrezillon@kernel.org" <bbrezillon@kernel.org>
Subject: Re: [PATCH v4 3/6] i3c: Add support for mastership request to I3C subsystem
Date: Wed, 10 Apr 2019 07:53:40 +0100
Message-ID: <20190410065339.GB8934@global.cadence.com> (raw)
In-Reply-To: <13D59CF9CEBAF94592A12E8AE55501350A6130A6@DE02WEMBXB.internal.synopsys.com>

Hi Vitor,

The 04/09/2019 15:46, Vitor Soares wrote:
> 
> Hi Przemek,
> 
> From: Przemyslaw Gaj <pgaj@cadence.com>
> Date: Tue, Apr 09, 2019 at 16:20:30
> 
> > Hi Vitor,
> > 
> > The 04/09/2019 14:31, Vitor Soares wrote:
> > > 
> > > Hi Przemek,
> > > 
> > > From my analyses you do i3c_master_register for secondary master in follow 
> > cases:
> > > - HC has already an dynamic address and it is the owner of the bus.
> > 
> > Correct. It requests bus ownership before registration, if DA is assigned.
> > 
> > > Or 
> > > - when it receive MR event enabled
> > 
> > Actually, when MR event is enabled and secondary master is not initialized 
> > yet.
> 
> I didn't find where you do this verification, can you point me?

In the driver, cdns_i3c_sec_master_event_up(). I'm requesting mastership and
registering the master when event is enabled and master is not registered yet.

> 
> > 
> > > 
> > > Is this correct?
> > > 
> > > From: vitor <soares@synopsys.com>
> > > Date: Mon, Apr 01, 2019 at 19:41:39
> > > 
> > > > Hi Przemek,
> > > > 
> > > > > +/**
> > > > >   * i3c_master_register() - register an I3C master
> > > > >   * @master: master used to send frames on the bus
> > > > >   * @parent: the parent device (the one that provides this I3C master
> > > > >   *	    controller)
> > > > >   * @ops: the master controller operations
> > > > > - * @secondary: true if you are registering a secondary master. Will 
> > return
> > > > > - *	       -ENOTSUPP if set to true since secondary masters are not yet
> > > > > - *	       supported
> > > > > + * @secondary: true if you are registering a secondary master.
> > > > >   *
> > > > >   * This function takes care of everything for you:
> > > > >   *
> > > > > @@ -2427,10 +2672,6 @@ int i3c_master_register(struct 
> > i3c_master_controller 
> > > > *master,
> > > > >  	struct i2c_dev_boardinfo *i2cbi;
> > > > >  	int ret;
> > > > >  
> > > > > -	/* We do not support secondary masters yet. */
> > > > > -	if (secondary)
> > > > > -		return -ENOTSUPP;
> > > > > -
> > > > >  	ret = i3c_master_check_ops(ops);
> > > > >  	if (ret)
> > > > >  		return ret;
> > > 
> > > The bus mode is set before the sec master does 
> > i3c_master_add_i3c_dev_locked() and
> > > i3c_master_add_i2c_dev() and after that it isn't updated. This can cause 
> > troubles for
> > > HDR-TS modes and when you have i2c devices INDEX(2) on the bus.
> > 
> > Yes, I see this now. It may happen before HC driver updates device list. I
> > should update device list right before i3c_master_register().
> > 
> > > 
> > > > > @@ -2504,9 +2745,11 @@ int i3c_master_register(struct 
> > i3c_master_controller 
> > > > *master,
> > > > >  	 * register I3C devices dicovered during the initial DAA.
> > > > >  	 */
> > > > >  	master->init_done = true;
> > > > > -	i3c_bus_normaluse_lock(&master->bus);
> > > > > -	i3c_master_register_new_i3c_devs(master);
> > > > > -	i3c_bus_normaluse_unlock(&master->bus);
> > > > > +	i3c_master_register_new_devs(master);
> > > > > +
> > > > > +	i3c_bus_maintenance_lock(&master->bus);
> > > > > +	i3c_master_enable_mr_events(master);
> > > 
> > > Why are you enabling MR events here? As a standard function this might case 
> > issues
> > > because the master can support ENEC/DISEC commands but not multi-master 
> > typologies.
> > 
> > I enable it at the end of master registration to be sure that current master 
> > is
> > ready for bus mastership relinquish. If controller does not support secondary
> > master role it can just do nothing with it.
> 
> I think it isn't good idea to have this here because you are forcing HC driver to
> verify it. If it is to be done in subsystem side probably it is better to have a
> master/slave functionalities structure.

If multi-master topology is not supported, request_mastership() hook won't be
implemented and also you will not implement enable/disable_mr_events() hooks.
You don't have to verify it in the driver.

> 
> > 
> > > 
> > > > > +	i3c_bus_maintenance_unlock(&master->bus);
> > > > >  
> > > > >  	return 0;
> > > > >  
> > > > > @@ -2524,6 +2767,30 @@ int i3c_master_register(struct 
> > i3c_master_controller 
> > > > *master,
> > > > >  EXPORT_SYMBOL_GPL(i3c_master_register);
> > > > >  
> > > 
> > > I'm thinking if isn't better to instantiate the bus apart and them register 
> > the secondary master.
> > 
> > It looked like that before but we decided to register everything or nothing.
> 
> I see your point, but for the future, slave implementation, we can have a
> function to instantiate just the bus and another for master or slave.
> 

We can go the same way with slave, and register bus and slave at once. If this
is the case.

> > 
> > > In this way you are able to add DEFSLVS even before the HC has enable MR 
> > events like it is done
> > > with dt devices.
> > 
> > I don't get it. What do you mean "add DEFSLVS"? DEFSLVS should be received 
> > from
> > current master right after ENTDAA. Could you please explain?
> 
> So the current master receive an hot join and send the DEFSLVS, when do you
> add them to the bus? Will you go for the all process to get all dev info and so on?
> 

When current master receives an hot-join, do ENTDAA to enumerate device which
joined the bus and then sends DEFSLVS. This data is stored in secondary master
controller and if secondary master can request mastership, collects all
required informations and adds the devices. It has to collect PID, DEFSLVS does
not provide this information.

> > 
> > > 
> > > Best regards,
> > > Vitor Soares
> > 
> > -- 
> > -- 
> > Przemyslaw Gaj
> > 
> 
> Best regards,
> Vitor Soares
> 

-- 
-- 
Przemyslaw Gaj

_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-10 13:58 [PATCH v4 0/6] Add the I3C mastership request Przemyslaw Gaj
2019-03-10 13:58 ` [PATCH v4 1/6] i3c: add addr and lvr to i2c_dev_desc structure Przemyslaw Gaj
2019-03-30 14:36   ` Boris Brezillon
2019-04-01 18:17     ` vitor
2019-04-01 18:31       ` Boris Brezillon
2019-04-01 18:48         ` vitor
2019-04-01 19:10           ` Przemyslaw Gaj
2019-04-01 19:24           ` Boris Brezillon
2019-04-02 11:10             ` vitor
2019-04-02 11:22               ` Przemyslaw Gaj
2019-04-02 11:32                 ` vitor
2019-04-02 11:53                   ` Boris Brezillon
2019-04-02 11:48     ` Boris Brezillon
2019-03-10 13:58 ` [PATCH v4 2/6] i3c: export bus maintenance lock and unlock functions Przemyslaw Gaj
2019-03-10 13:58 ` [PATCH v4 3/6] i3c: Add support for mastership request to I3C subsystem Przemyslaw Gaj
2019-03-30 15:06   ` Boris Brezillon
2019-04-01 18:41   ` vitor
2019-04-01 19:18     ` Boris Brezillon
2019-04-09 14:31     ` Vitor Soares
2019-04-09 15:20       ` Przemyslaw Gaj
2019-04-09 15:46         ` Vitor Soares
2019-04-10  6:53           ` Przemyslaw Gaj [this message]
2019-04-10 10:05             ` Vitor Soares
2019-04-10 10:36               ` Boris Brezillon
2019-04-12 14:28                 ` Vitor Soares
2019-04-12 14:57                   ` Boris Brezillon
2019-04-15 12:02                     ` Vitor Soares
2019-04-15 13:08                       ` Boris Brezillon
2019-03-10 13:58 ` [PATCH v4 4/6] i3c: master: cdns: add support for mastership request to Cadence I3C master driver Przemyslaw Gaj
2019-03-30 15:44   ` Boris Brezillon
2019-04-29 10:36     ` Przemyslaw Gaj
2019-05-18  7:34       ` Boris Brezillon
2019-03-10 13:58 ` [PATCH v4 5/6] i3c: master: Add module author Przemyslaw Gaj
2019-03-10 13:58 ` [PATCH v4 6/6] MAINTAINERS: add myself as co-maintainer of i3c subsystem Przemyslaw Gaj

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190410065339.GB8934@global.cadence.com \
    --to=pgaj@cadence.com \
    --cc=agolec@cadence.com \
    --cc=bbrezillon@kernel.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=rafalc@cadence.com \
    --cc=vitor.soares@synopsys.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-i3c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i3c/0 linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ https://lore.kernel.org/linux-i3c \
		linux-i3c@lists.infradead.org linux-i3c@archiver.kernel.org
	public-inbox-index linux-i3c


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-i3c


AGPL code for this site: git clone https://public-inbox.org/ public-inbox