Linux-i3c Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/4] i3c: remove device if failed on pre_assign_dyn_addr()
@ 2019-08-29 10:19 Vitor Soares
  2019-08-29 10:19 ` [PATCH 1/4] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
                   ` (3 more replies)
  0 siblings, 4 replies; 26+ messages in thread
From: Vitor Soares @ 2019-08-29 10:19 UTC (permalink / raw)
  To: linux-kernel, devicetree, linux-i3c
  Cc: mark.rutland, Joao.Pinto, robh+dt, Vitor Soares, bbrezillon

This patch series remove the devices that fail during
pre_assign_dyn_addr() and were being sent on DEFSVLS command.
With the change above, during the i3c_master_add_i3c_dev_locked() is
necessary to check if the device has i3c_boardinfo and try to assign the
i3c_dev_boardinfo->init_dyn_addr if there no oldev. This change will
allow to describe in DT device with preferable dynamic address but without
static address.

Vitor Soares (4):
  "i3c: detach and free device if pre_assign_dyn_addr fails "
  i3c: check i3c_boardinfo during i3c_master_add_i3c_dev_locked
  update i3c bingins
  i3c: master: dw: Reattach device on first empty location of DAT

 Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++---
 drivers/i3c/master.c                          | 33 ++++++++++++++++++++++++---
 drivers/i3c/master/dw-i3c-master.c            | 16 +++++++++++++
 3 files changed, 56 insertions(+), 6 deletions(-)

-- 
2.7.4


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, back to index

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-29 10:19 [PATCH 0/4] i3c: remove device if failed on pre_assign_dyn_addr() Vitor Soares
2019-08-29 10:19 ` [PATCH 1/4] i3c: master: detach and free device if pre_assign_dyn_addr() fails Vitor Soares
2019-08-29 10:41   ` Boris Brezillon
2019-08-29 13:53     ` Vitor Soares
2019-08-29 14:35       ` Boris Brezillon
2019-08-29 15:23         ` Vitor Soares
2019-08-29 15:37           ` Boris Brezillon
2019-08-29 16:23             ` Vitor Soares
2019-08-29 10:19 ` [PATCH 2/4] i3c: master: Check if devices have i3c_dev_boardinfo on i3c_master_add_i3c_dev_locked() Vitor Soares
2019-08-29 10:44   ` Boris Brezillon
2019-08-29 14:00     ` Vitor Soares
2019-08-29 14:39       ` Boris Brezillon
2019-08-29 14:39         ` Boris Brezillon
2019-08-29 15:07           ` Vitor Soares
2019-08-29 15:24             ` Boris Brezillon
2019-08-29 15:57               ` Vitor Soares
2019-08-29 16:15                 ` Boris Brezillon
2019-08-29 16:33                   ` Vitor Soares
2019-08-29 16:37                     ` Boris Brezillon
2019-08-29 16:27   ` Boris Brezillon
2019-08-29 10:19 ` [PATCH 3/4] dt-bindings: i3c: Make 'assigned-address' valid if static address != 0 Vitor Soares
2019-08-29 10:51   ` Boris Brezillon
2019-08-29 14:06     ` Vitor Soares
2019-08-29 10:19 ` [PATCH 4/4] i3c: master: dw: reattach device on first available location of address table Vitor Soares
2019-08-29 11:15   ` Boris Brezillon
2019-08-29 14:09     ` Vitor Soares

Linux-i3c Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-i3c/0 linux-i3c/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-i3c linux-i3c/ https://lore.kernel.org/linux-i3c \
		linux-i3c@lists.infradead.org
	public-inbox-index linux-i3c

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-i3c


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git