linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
@ 2019-02-04 12:48 Ricardo Ribalda Delgado
  2019-02-04 12:48 ` [PATCH v4 2/2] iio:dac:dac7612: device tree bindings Ricardo Ribalda Delgado
  2019-02-09 16:04 ` [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Jonathan Cameron
  0 siblings, 2 replies; 4+ messages in thread
From: Ricardo Ribalda Delgado @ 2019-02-04 12:48 UTC (permalink / raw)
  To: Jonathan Cameron, linux-iio, linux-kernel; +Cc: Ricardo Ribalda Delgado

It is a driver for Texas Instruments Dual, 12-Bit Serial Input
Digital-to-Analog Converter.

Datasheet of this chip:
http://www.ti.com/lit/ds/sbas106/sbas106.pdf

Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
---
Changelog v4 by: Jonathan Cameron <jic23@kernel.org>,

dt related:
-Fix pin name
-Fix part name

-improve comments

 MAINTAINERS                  |   6 ++
 drivers/iio/dac/Kconfig      |  10 ++
 drivers/iio/dac/Makefile     |   1 +
 drivers/iio/dac/ti-dac7612.c | 184 +++++++++++++++++++++++++++++++++++
 4 files changed, 201 insertions(+)
 create mode 100644 drivers/iio/dac/ti-dac7612.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d039f66a5cef..30ba5435906b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14877,6 +14877,12 @@ F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 F:	drivers/clk/keystone/sci-clk.c
 F:	drivers/reset/reset-ti-sci.c
 
+Texas Instruments' DAC7612 DAC Driver
+M:	Ricardo Ribalda <ricardo@ribalda.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	drivers/iio/dac/ti-dac7612.c
+
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index f28daf67db6a..fbef9107acad 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -375,6 +375,16 @@ config TI_DAC7311
 
 	  If compiled as a module, it will be called ti-dac7311.
 
+config TI_DAC7612
+	tristate "Texas Instruments 12-bit 2-channel DAC driver"
+	depends on SPI_MASTER && GPIOLIB
+	help
+	  Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB
+	  The driver hand drive the load pin automatically, otherwise
+	  it needs to be toggled manually.
+
+	  If compiled as a module, it will be called ti-dac7612.
+
 config VF610_DAC
 	tristate "Vybrid vf610 DAC driver"
 	depends on OF
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index f0a37c93de8e..1369fa1d2f0e 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o
 obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
 obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
 obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
+obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o
 obj-$(CONFIG_VF610_DAC) += vf610_dac.o
diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
new file mode 100644
index 000000000000..c46805144dd4
--- /dev/null
+++ b/drivers/iio/dac/ti-dac7612.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter
+ *
+ * Copyright 2019 Qtechnology A/S
+ * 2019 Ricardo Ribalda <ricardo@ribalda.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+
+#define DAC7612_RESOLUTION 12
+#define DAC7612_ADDRESS 4
+#define DAC7612_START 5
+
+struct dac7612 {
+	struct spi_device *spi;
+	struct gpio_desc *loaddacs;
+	uint16_t cache[2];
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	uint8_t data[2] ____cacheline_aligned;
+};
+
+static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val)
+{
+	int ret;
+
+	priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS);
+	priv->data[0] |= val >> 8;
+	priv->data[1] = val & 0xff;
+
+	priv->cache[channel] = val;
+
+	ret = spi_write(priv->spi, priv->data, sizeof(priv->data));
+	if (ret)
+		return ret;
+
+	gpiod_set_value(priv->loaddacs, 1);
+	gpiod_set_value(priv->loaddacs, 0);
+
+	return 0;
+}
+
+#define dac7612_CHANNEL(chan, name) {				\
+	.type = IIO_VOLTAGE,					\
+	.channel = (chan),					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.datasheet_name = name,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec dac7612_channels[] = {
+	dac7612_CHANNEL(0, "OUTA"),
+	dac7612_CHANNEL(1, "OUTB"),
+};
+
+static int dac7612_read_raw(struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct dac7612 *priv;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		priv = iio_priv(iio_dev);
+		*val = priv->cache[chan->channel];
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int dac7612_write_raw(struct iio_dev *iio_dev,
+			     const struct iio_chan_spec *chan,
+			     int val, int val2, long mask)
+{
+	struct dac7612 *priv = iio_priv(iio_dev);
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2)
+		return -EINVAL;
+
+	if (val == priv->cache[chan->channel])
+		return 0;
+
+	mutex_lock(&iio_dev->mlock);
+	ret = dac7612_cmd_single(priv, chan->channel, val);
+	mutex_unlock(&iio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info dac7612_info = {
+	.read_raw = dac7612_read_raw,
+	.write_raw = dac7612_write_raw,
+};
+
+static int dac7612_probe(struct spi_device *spi)
+{
+	struct iio_dev *iio_dev;
+	struct dac7612 *priv;
+	int i;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	priv = iio_priv(iio_dev);
+	/*
+	 * LOADDACS pin can be controlled by the driver or externally.
+	 * When controlled by the driver, the DAC value is updated after
+	 * every write.
+	 * When the driver does not control the PIN, the user or an external
+	 * event can change the value of all DACs by pulsing down the LOADDACs
+	 * pin.
+	 */
+	priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "ti,loaddacs",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(priv->loaddacs))
+		return PTR_ERR(priv->loaddacs);
+	priv->spi = spi;
+	spi_set_drvdata(spi, iio_dev);
+	iio_dev->dev.parent = &spi->dev;
+	iio_dev->info = &dac7612_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = dac7612_channels;
+	iio_dev->num_channels = ARRAY_SIZE(priv->cache);
+	iio_dev->name = spi_get_device_id(spi)->name;
+
+	for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
+		ret = dac7612_cmd_single(priv, i, 0);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(&spi->dev, iio_dev);
+}
+
+static const struct spi_device_id dac7612_id[] = {
+	{"ti-dac7612"},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, dac7612_id);
+
+static const struct of_device_id dac7612_of_match[] = {
+	{ .compatible = "ti,dac7612" },
+	{ .compatible = "ti,dac7612u" },
+	{ .compatible = "ti,dac7612ub" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, dac7612_of_match);
+
+static struct spi_driver dac7612_driver = {
+	.driver = {
+		   .name = "ti-dac7612",
+		   .of_match_table = dac7612_of_match,
+		   },
+	.probe = dac7612_probe,
+	.id_table = dac7612_id,
+};
+module_spi_driver(dac7612_driver);
+
+MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>");
+MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH v4 2/2] iio:dac:dac7612: device tree bindings
  2019-02-04 12:48 [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Ricardo Ribalda Delgado
@ 2019-02-04 12:48 ` Ricardo Ribalda Delgado
  2019-02-09 16:03   ` Jonathan Cameron
  2019-02-09 16:04 ` [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Jonathan Cameron
  1 sibling, 1 reply; 4+ messages in thread
From: Ricardo Ribalda Delgado @ 2019-02-04 12:48 UTC (permalink / raw)
  To: Jonathan Cameron, linux-iio, linux-kernel
  Cc: Ricardo Ribalda Delgado, devicetree

Bindings for dac7612.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
---
v4 Changelog by Rob Herring <robh@kernel.org>

-Add ti, prefix to gpio
-Fix example da@1
-Fix partname

 .../bindings/iio/dac/ti,dac7612.txt           | 29 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt

diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
new file mode 100644
index 000000000000..14a66c0dcdaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -0,0 +1,29 @@
+* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
+
+The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
+12-bit monotonicity performance over the industrial temperature range.
+Is is programmable through an SPI interface.
+
+The internal DACs are loaded when the LOADDACS pin is pulled down.
+
+http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+
+Required Properties:
+- compatible: Should be one of:
+		"ti,dac7612"
+		"ti,dac7612u"
+		"ti,dac7612ub"
+- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional Properties:
+- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
+- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	dac@1 {
+		compatible = "ti,dac7612";
+		reg = <0x1>;
+		ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+	};
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 30ba5435906b..e28e5afaae16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14882,6 +14882,7 @@ M:	Ricardo Ribalda <ricardo@ribalda.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/dac/ti-dac7612.c
+F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v4 2/2] iio:dac:dac7612: device tree bindings
  2019-02-04 12:48 ` [PATCH v4 2/2] iio:dac:dac7612: device tree bindings Ricardo Ribalda Delgado
@ 2019-02-09 16:03   ` Jonathan Cameron
  0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2019-02-09 16:03 UTC (permalink / raw)
  To: Ricardo Ribalda Delgado; +Cc: linux-iio, linux-kernel, devicetree

On Mon,  4 Feb 2019 13:48:33 +0100
Ricardo Ribalda Delgado <ricardo@ribalda.com> wrote:

> Bindings for dac7612.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Simple binding so I'm happy to take with out a DT review unless someone
feels like giving one.  Seems to have answered Rob's previous comments.

Applied to the togreg branch of iio.git with the tiny tweak of dropping
the extra blank line at the end of the file.

Thanks,

Jonathan
> ---
> v4 Changelog by Rob Herring <robh@kernel.org>
> 
> -Add ti, prefix to gpio
> -Fix example da@1
> -Fix partname
> 
>  .../bindings/iio/dac/ti,dac7612.txt           | 29 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> new file mode 100644
> index 000000000000..14a66c0dcdaa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -0,0 +1,29 @@
> +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
> +
> +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
> +12-bit monotonicity performance over the industrial temperature range.
> +Is is programmable through an SPI interface.
> +
> +The internal DACs are loaded when the LOADDACS pin is pulled down.
> +
> +http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +
> +Required Properties:
> +- compatible: Should be one of:
> +		"ti,dac7612"
> +		"ti,dac7612u"
> +		"ti,dac7612ub"
> +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional Properties:
> +- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
> +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +
> +	dac@1 {
> +		compatible = "ti,dac7612";
> +		reg = <0x1>;
> +		ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
> +	};
> +
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 30ba5435906b..e28e5afaae16 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14882,6 +14882,7 @@ M:	Ricardo Ribalda <ricardo@ribalda.com>
>  L:	linux-iio@vger.kernel.org
>  S:	Supported
>  F:	drivers/iio/dac/ti-dac7612.c
> +F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
>  
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  2019-02-04 12:48 [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Ricardo Ribalda Delgado
  2019-02-04 12:48 ` [PATCH v4 2/2] iio:dac:dac7612: device tree bindings Ricardo Ribalda Delgado
@ 2019-02-09 16:04 ` Jonathan Cameron
  1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2019-02-09 16:04 UTC (permalink / raw)
  To: Ricardo Ribalda Delgado; +Cc: linux-iio, linux-kernel

On Mon,  4 Feb 2019 13:48:32 +0100
Ricardo Ribalda Delgado <ricardo@ribalda.com> wrote:

> It is a driver for Texas Instruments Dual, 12-Bit Serial Input
> Digital-to-Analog Converter.
> 
> Datasheet of this chip:
> http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> 
> Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changelog v4 by: Jonathan Cameron <jic23@kernel.org>,
> 
> dt related:
> -Fix pin name
> -Fix part name
> 
> -improve comments
> 
>  MAINTAINERS                  |   6 ++
>  drivers/iio/dac/Kconfig      |  10 ++
>  drivers/iio/dac/Makefile     |   1 +
>  drivers/iio/dac/ti-dac7612.c | 184 +++++++++++++++++++++++++++++++++++
>  4 files changed, 201 insertions(+)
>  create mode 100644 drivers/iio/dac/ti-dac7612.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d039f66a5cef..30ba5435906b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14877,6 +14877,12 @@ F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
>  F:	drivers/clk/keystone/sci-clk.c
>  F:	drivers/reset/reset-ti-sci.c
>  
> +Texas Instruments' DAC7612 DAC Driver
> +M:	Ricardo Ribalda <ricardo@ribalda.com>
> +L:	linux-iio@vger.kernel.org
> +S:	Supported
> +F:	drivers/iio/dac/ti-dac7612.c
> +
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>
>  L:	linux-media@vger.kernel.org
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index f28daf67db6a..fbef9107acad 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -375,6 +375,16 @@ config TI_DAC7311
>  
>  	  If compiled as a module, it will be called ti-dac7311.
>  
> +config TI_DAC7612
> +	tristate "Texas Instruments 12-bit 2-channel DAC driver"
> +	depends on SPI_MASTER && GPIOLIB
> +	help
> +	  Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB
> +	  The driver hand drive the load pin automatically, otherwise
> +	  it needs to be toggled manually.
> +
> +	  If compiled as a module, it will be called ti-dac7612.
> +
>  config VF610_DAC
>  	tristate "Vybrid vf610 DAC driver"
>  	depends on OF
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index f0a37c93de8e..1369fa1d2f0e 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o
>  obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
>  obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
>  obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
> +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o
>  obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
> new file mode 100644
> index 000000000000..c46805144dd4
> --- /dev/null
> +++ b/drivers/iio/dac/ti-dac7612.c
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter
> + *
> + * Copyright 2019 Qtechnology A/S
> + * 2019 Ricardo Ribalda <ricardo@ribalda.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +
> +#define DAC7612_RESOLUTION 12
> +#define DAC7612_ADDRESS 4
> +#define DAC7612_START 5
> +
> +struct dac7612 {
> +	struct spi_device *spi;
> +	struct gpio_desc *loaddacs;
> +	uint16_t cache[2];
> +
> +	/*
> +	 * DMA (thus cache coherency maintenance) requires the
> +	 * transfer buffers to live in their own cache lines.
> +	 */
> +	uint8_t data[2] ____cacheline_aligned;
> +};
> +
> +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val)
> +{
> +	int ret;
> +
> +	priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS);
> +	priv->data[0] |= val >> 8;
> +	priv->data[1] = val & 0xff;
> +
> +	priv->cache[channel] = val;
> +
> +	ret = spi_write(priv->spi, priv->data, sizeof(priv->data));
> +	if (ret)
> +		return ret;
> +
> +	gpiod_set_value(priv->loaddacs, 1);
> +	gpiod_set_value(priv->loaddacs, 0);
> +
> +	return 0;
> +}
> +
> +#define dac7612_CHANNEL(chan, name) {				\
> +	.type = IIO_VOLTAGE,					\
> +	.channel = (chan),					\
> +	.indexed = 1,						\
> +	.output = 1,						\
> +	.datasheet_name = name,					\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
> +}
> +
> +static const struct iio_chan_spec dac7612_channels[] = {
> +	dac7612_CHANNEL(0, "OUTA"),
> +	dac7612_CHANNEL(1, "OUTB"),
> +};
> +
> +static int dac7612_read_raw(struct iio_dev *iio_dev,
> +			    const struct iio_chan_spec *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct dac7612 *priv;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		priv = iio_priv(iio_dev);
> +		*val = priv->cache[chan->channel];
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1;
> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int dac7612_write_raw(struct iio_dev *iio_dev,
> +			     const struct iio_chan_spec *chan,
> +			     int val, int val2, long mask)
> +{
> +	struct dac7612 *priv = iio_priv(iio_dev);
> +	int ret;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2)
> +		return -EINVAL;
> +
> +	if (val == priv->cache[chan->channel])
> +		return 0;
> +
> +	mutex_lock(&iio_dev->mlock);
> +	ret = dac7612_cmd_single(priv, chan->channel, val);
> +	mutex_unlock(&iio_dev->mlock);
> +
> +	return ret;
> +}
> +
> +static const struct iio_info dac7612_info = {
> +	.read_raw = dac7612_read_raw,
> +	.write_raw = dac7612_write_raw,
> +};
> +
> +static int dac7612_probe(struct spi_device *spi)
> +{
> +	struct iio_dev *iio_dev;
> +	struct dac7612 *priv;
> +	int i;
> +	int ret;
> +
> +	iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv));
> +	if (!iio_dev)
> +		return -ENOMEM;
> +
> +	priv = iio_priv(iio_dev);
> +	/*
> +	 * LOADDACS pin can be controlled by the driver or externally.
> +	 * When controlled by the driver, the DAC value is updated after
> +	 * every write.
> +	 * When the driver does not control the PIN, the user or an external
> +	 * event can change the value of all DACs by pulsing down the LOADDACs
> +	 * pin.
> +	 */
> +	priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "ti,loaddacs",
> +						 GPIOD_OUT_LOW);
> +	if (IS_ERR(priv->loaddacs))
> +		return PTR_ERR(priv->loaddacs);
> +	priv->spi = spi;
> +	spi_set_drvdata(spi, iio_dev);
> +	iio_dev->dev.parent = &spi->dev;
> +	iio_dev->info = &dac7612_info;
> +	iio_dev->modes = INDIO_DIRECT_MODE;
> +	iio_dev->channels = dac7612_channels;
> +	iio_dev->num_channels = ARRAY_SIZE(priv->cache);
> +	iio_dev->name = spi_get_device_id(spi)->name;
> +
> +	for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
> +		ret = dac7612_cmd_single(priv, i, 0);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return devm_iio_device_register(&spi->dev, iio_dev);
> +}
> +
> +static const struct spi_device_id dac7612_id[] = {
> +	{"ti-dac7612"},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, dac7612_id);
> +
> +static const struct of_device_id dac7612_of_match[] = {
> +	{ .compatible = "ti,dac7612" },
> +	{ .compatible = "ti,dac7612u" },
> +	{ .compatible = "ti,dac7612ub" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, dac7612_of_match);
> +
> +static struct spi_driver dac7612_driver = {
> +	.driver = {
> +		   .name = "ti-dac7612",
> +		   .of_match_table = dac7612_of_match,
> +		   },
> +	.probe = dac7612_probe,
> +	.id_table = dac7612_id,
> +};
> +module_spi_driver(dac7612_driver);
> +
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>");
> +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver");
> +MODULE_LICENSE("GPL v2");


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-02-09 16:04 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-04 12:48 [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Ricardo Ribalda Delgado
2019-02-04 12:48 ` [PATCH v4 2/2] iio:dac:dac7612: device tree bindings Ricardo Ribalda Delgado
2019-02-09 16:03   ` Jonathan Cameron
2019-02-09 16:04 ` [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).