* [PATCH v13 0/2] iio: proximity: driver for vcnl3020 @ 2020-05-07 13:25 Ivan Mikhaylov 2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov 2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov 0 siblings, 2 replies; 6+ messages in thread From: Ivan Mikhaylov @ 2020-05-07 13:25 UTC (permalink / raw) Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko Add proximity sensor driver for Vishay vcnl3020. Only on-demand measurement is supported for now. Changes from v12: 1. forgot to change path inside yaml. Changes from v11: 1. minor changes to yaml. Changes from v10: 1. add vcnl3020_property struct for optional properties. Changes from v9: 1. minor changes. 2. pass microamps from dts, not register value. Changes from v8: 1. add vcnl3020 prefix into get_and_apply_property function. 2. add bsd license into yaml. 3. vishay,led-current-milliamp -> vishay,led-current-microamp. 4. add default value into vishay,led-current-microamp and change register values into microamps. Changes from v7: 1. forgot to add Reviewed-by tag. Changes from v6: 1. minor changes 1.1 remove VCNL_DRV_NAME 1.2 add braces in get_and_apply_property Changes from v5: 1. add get_and_apply_property function for optional parameters. 2. minor changes. Changes from v4: 1. add vdd-supply,vddio-supply,interrupts properties into yaml. 2. led-current -> vishay,led-current-milliamp in yaml. 3. add possible values enum list. 4. add bulk_read for result hi/lo registers. 5. add description of vcnl3020_data structure. 6. vcnl3020 id table is removed. 7. make "vishay,led-current-milliamp" optional in yaml and code. Changes from v3: 1. minor changes. 2. add i2c block to fix dts section in yaml. Changes from v2: 1. using regmap_read_poll_timeout instead of do-while in measurement function. 2. change struct i2client* in vcnl3020_data to struct dev* 3. enable REGMAP_I2C in Kconfig Changes from v1: 1. using regmap interface instead of i2c_smbus_* calls. 2. switch from probe to probe_new. 3. s32/int32_t -> int Ivan Mikhaylov (2): dt-bindings: proximity: provide vcnl3020 device tree binding document iio: proximity: Add driver support for vcnl3020 proximity sensor .../iio/proximity/vishay,vcnl3020.yaml | 65 +++++ drivers/iio/proximity/Kconfig | 11 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/vcnl3020.c | 258 ++++++++++++++++++ 4 files changed, 335 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml create mode 100644 drivers/iio/proximity/vcnl3020.c -- 2.21.1 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document 2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov @ 2020-05-07 13:25 ` Ivan Mikhaylov 2020-05-08 14:51 ` Jonathan Cameron 2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov 1 sibling, 1 reply; 6+ messages in thread From: Ivan Mikhaylov @ 2020-05-07 13:25 UTC (permalink / raw) Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko Mostly standard i2c driver with some additional led-current option for vcnl3020. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> --- .../iio/proximity/vishay,vcnl3020.yaml | 65 +++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml new file mode 100644 index 000000000000..408dee17cdf5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrated Proximity Sensor With Infrared Emitter + +maintainers: + - Ivan Mikhaylov <i.mikhaylov@yadro.com> + +description: | + The VCNL3020 is a fully integrated proximity sensor. Fully integrated means + that the infrared emitter is included in the package. It has 16-bit + resolution. It includes a signal processing IC and features standard I2C + communication interface. It features an interrupt function. + + Specifications about the devices can be found at: + https://www.vishay.com/docs/84150/vcnl3020.pdf + +properties: + compatible: + enum: + - vishay,vcnl3020 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + vishay,led-current-microamp: + description: + IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA, + 1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values + higher than decimal 20. The drive current for the LED used in proximity + sensing. + enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, + 180000, 190000, 200000] + default: 20000 + +required: + - compatible + - reg + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + proximity@13 { + compatible = "vishay,vcnl3020"; + reg = <0x13>; + vishay,led-current-microamp = <200000>; + }; + }; -- 2.21.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document 2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov @ 2020-05-08 14:51 ` Jonathan Cameron 2020-05-09 10:38 ` Ivan Mikhaylov 0 siblings, 1 reply; 6+ messages in thread From: Jonathan Cameron @ 2020-05-08 14:51 UTC (permalink / raw) To: Ivan Mikhaylov Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko On Thu, 7 May 2020 16:25:59 +0300 Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote: > Mostly standard i2c driver with some additional led-current option > for vcnl3020. > > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> > --- > .../iio/proximity/vishay,vcnl3020.yaml | 65 +++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > > diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > new file mode 100644 > index 000000000000..408dee17cdf5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > @@ -0,0 +1,65 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Integrated Proximity Sensor With Infrared Emitter > + > +maintainers: > + - Ivan Mikhaylov <i.mikhaylov@yadro.com> > + > +description: | > + The VCNL3020 is a fully integrated proximity sensor. Fully integrated means > + that the infrared emitter is included in the package. It has 16-bit > + resolution. It includes a signal processing IC and features standard I2C > + communication interface. It features an interrupt function. > + > + Specifications about the devices can be found at: > + https://www.vishay.com/docs/84150/vcnl3020.pdf > + > +properties: > + compatible: > + enum: > + - vishay,vcnl3020 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + vdd-supply: > + description: Regulator that provides power to the sensor > + > + vddio-supply: > + description: Regulator that provides power to the bus > + > + vishay,led-current-microamp: > + description: > + IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA, > + 1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values > + higher than decimal 20. The drive current for the LED used in proximity > + sensing. This text is really confusing. Just let the enum speak for itself and leave text as something short like "The driver current for the LED used in proximity sensing. " Units and values are clear already. > + enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, > + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, > + 180000, 190000, 200000] > + default: 20000 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + i2c { > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + proximity@13 { > + compatible = "vishay,vcnl3020"; > + reg = <0x13>; > + vishay,led-current-microamp = <200000>; > + }; > + }; ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document 2020-05-08 14:51 ` Jonathan Cameron @ 2020-05-09 10:38 ` Ivan Mikhaylov 2020-05-09 15:44 ` Jonathan Cameron 0 siblings, 1 reply; 6+ messages in thread From: Ivan Mikhaylov @ 2020-05-09 10:38 UTC (permalink / raw) To: Jonathan Cameron Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko On Fri, 2020-05-08 at 15:51 +0100, Jonathan Cameron wrote: > On Thu, 7 May 2020 16:25:59 +0300 > Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote: > > > Mostly standard i2c driver with some additional led-current option > > for vcnl3020. > > > > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> > > --- > > .../iio/proximity/vishay,vcnl3020.yaml | 65 +++++++++++++++++++ > > 1 file changed, 65 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > > b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > > new file mode 100644 > > index 000000000000..408dee17cdf5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > > @@ -0,0 +1,65 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Integrated Proximity Sensor With Infrared Emitter > > + > > +maintainers: > > + - Ivan Mikhaylov <i.mikhaylov@yadro.com> > > + > > +description: | > > + The VCNL3020 is a fully integrated proximity sensor. Fully integrated > > means > > + that the infrared emitter is included in the package. It has 16-bit > > + resolution. It includes a signal processing IC and features standard I2C > > + communication interface. It features an interrupt function. > > + > > + Specifications about the devices can be found at: > > + https://www.vishay.com/docs/84150/vcnl3020.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - vishay,vcnl3020 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + vdd-supply: > > + description: Regulator that provides power to the sensor > > + > > + vddio-supply: > > + description: Regulator that provides power to the bus > > + > > + vishay,led-current-microamp: > > + description: > > + IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 mA, > > + 1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for values > > + higher than decimal 20. The drive current for the LED used in > > proximity > > + sensing. > > This text is really confusing. Just let the enum speak for itself and leave > text as > something short like > > "The driver current for the LED used in proximity sensing. " > > Units and values are clear already. > Jonathan, just to double check, for preventing further problems with misunderstanding, is that what you want? vishay,led-current-microamp: description: The driver current for the LED used in proximity sensing. enum: [0..200000] <- just for shortening default: 20000 Thanks. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document 2020-05-09 10:38 ` Ivan Mikhaylov @ 2020-05-09 15:44 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-05-09 15:44 UTC (permalink / raw) To: Ivan Mikhaylov, Jonathan Cameron Cc: Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko On 9 May 2020 11:38:46 BST, Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote: >On Fri, 2020-05-08 at 15:51 +0100, Jonathan Cameron wrote: >> On Thu, 7 May 2020 16:25:59 +0300 >> Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote: >> >> > Mostly standard i2c driver with some additional led-current option >> > for vcnl3020. >> > >> > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> >> > --- >> > .../iio/proximity/vishay,vcnl3020.yaml | 65 >+++++++++++++++++++ >> > 1 file changed, 65 insertions(+) >> > create mode 100644 >> > >Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml >> > >> > diff --git >> > >a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml >> > >b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml >> > new file mode 100644 >> > index 000000000000..408dee17cdf5 >> > --- /dev/null >> > +++ >b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml >> > @@ -0,0 +1,65 @@ >> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> > +%YAML 1.2 >> > +--- >> > +$id: >http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# >> > +$schema: http://devicetree.org/meta-schemas/core.yaml# >> > + >> > +title: Integrated Proximity Sensor With Infrared Emitter >> > + >> > +maintainers: >> > + - Ivan Mikhaylov <i.mikhaylov@yadro.com> >> > + >> > +description: | >> > + The VCNL3020 is a fully integrated proximity sensor. Fully >integrated >> > means >> > + that the infrared emitter is included in the package. It has >16-bit >> > + resolution. It includes a signal processing IC and features >standard I2C >> > + communication interface. It features an interrupt function. >> > + >> > + Specifications about the devices can be found at: >> > + https://www.vishay.com/docs/84150/vcnl3020.pdf >> > + >> > +properties: >> > + compatible: >> > + enum: >> > + - vishay,vcnl3020 >> > + >> > + reg: >> > + maxItems: 1 >> > + >> > + interrupts: >> > + maxItems: 1 >> > + >> > + vdd-supply: >> > + description: Regulator that provides power to the sensor >> > + >> > + vddio-supply: >> > + description: Regulator that provides power to the bus >> > + >> > + vishay,led-current-microamp: >> > + description: >> > + IR LED current value with valid Range = 0 to 20d. e.g. 0 = 0 >mA, >> > + 1 = 10 mA, 20 = 200 mA. LED Current is limited to 200 mA for >values >> > + higher than decimal 20. The drive current for the LED used >in >> > proximity >> > + sensing. >> >> This text is really confusing. Just let the enum speak for itself and >leave >> text as >> something short like >> >> "The driver current for the LED used in proximity sensing. " >> >> Units and values are clear already. >> > >Jonathan, just to double check, for preventing further problems with >misunderstanding, is that what you want? > > vishay,led-current-microamp: > description: > The driver current for the LED used in proximity sensing. > > enum: [0..200000] <- just for shortening > default: 20000 > >Thanks. Yes J -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor 2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov 2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov @ 2020-05-07 13:26 ` Ivan Mikhaylov 1 sibling, 0 replies; 6+ messages in thread From: Ivan Mikhaylov @ 2020-05-07 13:26 UTC (permalink / raw) Cc: Ivan Mikhaylov, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio, linux-kernel, devicetree, Mark Rutland, Rob Herring, Andy Shevchenko Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> --- drivers/iio/proximity/Kconfig | 11 ++ drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/vcnl3020.c | 258 +++++++++++++++++++++++++++++++ 3 files changed, 270 insertions(+) create mode 100644 drivers/iio/proximity/vcnl3020.c diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index d53601447da4..b8d2b17e60ac 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -112,6 +112,17 @@ config SRF08 To compile this driver as a module, choose M here: the module will be called srf08. +config VCNL3020 + tristate "VCNL3020 proximity sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL3020 + proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl3020. + config VL53L0X_I2C tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)" depends on I2C diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 0bb5f9de13d6..8245978ced30 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -12,5 +12,6 @@ obj-$(CONFIG_RFD77402) += rfd77402.o obj-$(CONFIG_SRF04) += srf04.o obj-$(CONFIG_SRF08) += srf08.o obj-$(CONFIG_SX9500) += sx9500.o +obj-$(CONFIG_VCNL3020) += vcnl3020.o obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c new file mode 100644 index 000000000000..9ff1a164c2e6 --- /dev/null +++ b/drivers/iio/proximity/vcnl3020.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for Vishay VCNL3020 proximity sensor on i2c bus. + * Based on Vishay VCNL4000 driver code. + * + * TODO: interrupts. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/regmap.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VCNL3020_PROD_ID 0x21 + +#define VCNL_COMMAND 0x80 /* Command register */ +#define VCNL_PROD_REV 0x81 /* Product ID and Revision ID */ +#define VCNL_PROXIMITY_RATE 0x82 /* Rate of Proximity Measurement */ +#define VCNL_LED_CURRENT 0x83 /* IR LED current for proximity mode */ +#define VCNL_PS_RESULT_HI 0x87 /* Proximity result register, MSB */ +#define VCNL_PS_RESULT_LO 0x88 /* Proximity result register, LSB */ +#define VCNL_PS_ICR 0x89 /* Interrupt Control Register */ +#define VCNL_PS_LO_THR_HI 0x8a /* High byte of low threshold value */ +#define VCNL_PS_LO_THR_LO 0x8b /* Low byte of low threshold value */ +#define VCNL_PS_HI_THR_HI 0x8c /* High byte of high threshold value */ +#define VCNL_PS_HI_THR_LO 0x8d /* Low byte of high threshold value */ +#define VCNL_ISR 0x8e /* Interrupt Status Register */ +#define VCNL_PS_MOD_ADJ 0x8f /* Proximity Modulator Timing Adjustment */ + +/* Bit masks for COMMAND register */ +#define VCNL_PS_RDY BIT(5) /* proximity data ready? */ +#define VCNL_PS_OD BIT(3) /* start on-demand proximity + * measurement + */ + +#define VCNL_ON_DEMAND_TIMEOUT_US 100000 +#define VCNL_POLL_US 20000 + +/** + * struct vcnl3020_data - vcnl3020 specific data. + * @regmap: device register map. + * @dev: vcnl3020 device. + * @rev: revision id. + * @lock: lock for protecting access to device hardware registers. + */ +struct vcnl3020_data { + struct regmap *regmap; + struct device *dev; + u8 rev; + struct mutex lock; +}; + +/** + * struct vcnl3020_property - vcnl3020 property. + * @name: property name. + * @reg: i2c register offset. + * @conversion_func: conversion function. + */ +struct vcnl3020_property { + const char *name; + u32 reg; + u32 (*conversion_func)(u32 *val); +}; + +static u32 microamp_to_reg(u32 *val) +{ + /* + * An example of conversion from uA to reg val: + * 200000 uA == 200 mA == 20 + */ + return *val /= 10000; +}; + +static struct vcnl3020_property vcnl3020_led_current_property = { + .name = "vishay,led-current-microamp", + .reg = VCNL_LED_CURRENT, + .conversion_func = microamp_to_reg, +}; + +static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data, + struct vcnl3020_property prop) +{ + int rc; + u32 val; + + rc = device_property_read_u32(data->dev, prop.name, &val); + if (rc) + return 0; + + if (prop.conversion_func) + prop.conversion_func(&val); + + rc = regmap_write(data->regmap, prop.reg, val); + if (rc) { + dev_err(data->dev, "Error (%d) setting property (%s)\n", + rc, prop.name); + } + + return rc; +} + +static int vcnl3020_init(struct vcnl3020_data *data) +{ + int rc; + unsigned int reg; + + rc = regmap_read(data->regmap, VCNL_PROD_REV, ®); + if (rc) { + dev_err(data->dev, + "Error (%d) reading product revision\n", rc); + return rc; + } + + if (reg != VCNL3020_PROD_ID) { + dev_err(data->dev, + "Product id (%x) did not match vcnl3020 (%x)\n", reg, + VCNL3020_PROD_ID); + return -ENODEV; + } + + data->rev = reg; + mutex_init(&data->lock); + + return vcnl3020_get_and_apply_property(data, + vcnl3020_led_current_property); +}; + +static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val) +{ + int rc; + unsigned int reg; + __be16 res; + + mutex_lock(&data->lock); + + rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD); + if (rc) + goto err_unlock; + + /* wait for data to become ready */ + rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg, + reg & VCNL_PS_RDY, VCNL_POLL_US, + VCNL_ON_DEMAND_TIMEOUT_US); + if (rc) { + dev_err(data->dev, + "Error (%d) reading vcnl3020 command register\n", rc); + goto err_unlock; + } + + /* high & low result bytes read */ + rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res, + sizeof(res)); + if (rc) + goto err_unlock; + + *val = be16_to_cpu(res); + +err_unlock: + mutex_unlock(&data->lock); + + return rc; +} + +static const struct iio_chan_spec vcnl3020_channels[] = { + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, +}; + +static int vcnl3020_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int rc; + struct vcnl3020_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + rc = vcnl3020_measure_proximity(data, val); + if (rc) + return rc; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info vcnl3020_info = { + .read_raw = vcnl3020_read_raw, +}; + +static const struct regmap_config vcnl3020_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = VCNL_PS_MOD_ADJ, +}; + +static int vcnl3020_probe(struct i2c_client *client) +{ + struct vcnl3020_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int rc; + + regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap_init failed\n"); + return PTR_ERR(regmap); + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->regmap = regmap; + data->dev = &client->dev; + + rc = vcnl3020_init(data); + if (rc) + return rc; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &vcnl3020_info; + indio_dev->channels = vcnl3020_channels; + indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels); + indio_dev->name = "vcnl3020"; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct of_device_id vcnl3020_of_match[] = { + { + .compatible = "vishay,vcnl3020", + }, + {} +}; +MODULE_DEVICE_TABLE(of, vcnl3020_of_match); + +static struct i2c_driver vcnl3020_driver = { + .driver = { + .name = "vcnl3020", + .of_match_table = vcnl3020_of_match, + }, + .probe_new = vcnl3020_probe, +}; +module_i2c_driver(vcnl3020_driver); + +MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@yadro.com>"); +MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver"); +MODULE_LICENSE("GPL"); -- 2.21.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-10 8:37 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-07 13:25 [PATCH v13 0/2] iio: proximity: driver for vcnl3020 Ivan Mikhaylov 2020-05-07 13:25 ` [PATCH v13 1/2] dt-bindings: proximity: provide vcnl3020 device tree binding document Ivan Mikhaylov 2020-05-08 14:51 ` Jonathan Cameron 2020-05-09 10:38 ` Ivan Mikhaylov 2020-05-09 15:44 ` Jonathan Cameron 2020-05-07 13:26 ` [PATCH v13 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor Ivan Mikhaylov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).