Linux-IIO Archive on
 help / color / Atom feed
* [RFC] IIO Driver for GSoC 2020
@ 2020-03-26 17:34 Nishant Malpani
  2020-03-26 18:47 ` Bogdan, Dragos
  0 siblings, 1 reply; 2+ messages in thread
From: Nishant Malpani @ 2020-03-26 17:34 UTC (permalink / raw)
  To: linux-iio; +Cc: Dragos.Bogdan

Hello IIO,

The project proposal for GSoC 2020 under The Linux Foundation [1] must 
include a Analog Devices, Inc.'s component for which a novel driver is 
to be implemented. My search for a prospective device has culminated to 
consider ADXRS290 Gyroscope. About ADXRS290:

- Ultra-low Noise, Dual-Axis (Pitch and Roll) MEMS Gyroscope
- "Recommended for New Designs" phase
- SPI digital output
- Datasheet in [2]
- Product overview in [3]

The existence of any compatible drivers for the above component was 
looked for in Analog Device, Inc.'s page that lists all drivers [4] and 
their kernel tree [5] and the Linux Kernel Driver database (LKDDb). It 
was found to be void and ergo my decision to choose the aforementioned 

Is there any other factor I should consider before choosing a component 
to make a driver for? Do I go ahead with ADXRS290 gyroscope in my 
proposal? If yes, are there any recommendations/suggestions you'd like 
to provide for a beginner indulging in making a kernel driver for such a 

Thank you for your time.

With regards,
Nishant Malpani


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-26 17:34 [RFC] IIO Driver for GSoC 2020 Nishant Malpani
2020-03-26 18:47 ` Bogdan, Dragos

Linux-IIO Archive on

Archives are clonable:
	git clone --mirror linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ \
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone