* [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
@ 2020-03-16 6:52 Mike Looijmans
2020-03-22 17:37 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Mike Looijmans @ 2020-03-16 6:52 UTC (permalink / raw)
To: jic23, devicetree, linux-iio
Cc: linux-kernel, knaack.h, lars, pmeerw, robh+dt, mark.rutland,
Mike Looijmans
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
.../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
new file mode 100644
index 000000000000..691a47726dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
@@ -0,0 +1,23 @@
+* Bosch BMI088 IMU combining accelerometer and gyroscope
+
+https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+Required properties:
+
+ - compatible : should be "bosch,bmi088_accel"
+ - reg : the I2C address of the sensor or the SPI chip select number
+
+Optional properties:
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
+ IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bmi088_accel@1 {
+ compatible = "bosch,bmi088_accel";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <90 IRQ_TYPE_EDGE_RISING>;
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
2020-03-16 6:52 [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings Mike Looijmans
@ 2020-03-22 17:37 ` Jonathan Cameron
2020-03-23 9:56 ` Mike Looijmans
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2020-03-22 17:37 UTC (permalink / raw)
To: Mike Looijmans
Cc: devicetree, linux-iio, linux-kernel, knaack.h, lars, pmeerw,
robh+dt, mark.rutland
On Mon, 16 Mar 2020 07:52:18 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++
Sorry. All new DT bindings need to be in yaml format.
Please put this in the same series as the driver.
Thanks,
Jonathan
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> new file mode 100644
> index 000000000000..691a47726dbc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> @@ -0,0 +1,23 @@
> +* Bosch BMI088 IMU combining accelerometer and gyroscope
> +
> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +Required properties:
> +
> + - compatible : should be "bosch,bmi088_accel"
> + - reg : the I2C address of the sensor or the SPI chip select number
> +
> +Optional properties:
> +
> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
> + IRQ_TYPE_EDGE_RISING
> +
> +Example:
> +
> +bmi088_accel@1 {
> + compatible = "bosch,bmi088_accel";
> + reg = <1>;
> + spi-max-frequency = <10000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <90 IRQ_TYPE_EDGE_RISING>;
> +};
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
2020-03-22 17:37 ` Jonathan Cameron
@ 2020-03-23 9:56 ` Mike Looijmans
2020-03-23 16:41 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Mike Looijmans @ 2020-03-23 9:56 UTC (permalink / raw)
To: Jonathan Cameron
Cc: devicetree, linux-iio, linux-kernel, knaack.h, lars, pmeerw,
robh+dt, mark.rutland
On 22-03-2020 18:37, Jonathan Cameron wrote:
> On Mon, 16 Mar 2020 07:52:18 +0100
> Mike Looijmans <mike.looijmans@topic.nl> wrote:
>
>> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
>> the accelerometer part.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>> ---
>> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++
>
> Sorry. All new DT bindings need to be in yaml format.
>
> Please put this in the same series as the driver.
sooy, I noticed this too late, patches are underway in separate mails
now. Hope that isn't a blocking issue?
>
> Thanks,
>
> Jonathan
>
>> 1 file changed, 23 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
>> new file mode 100644
>> index 000000000000..691a47726dbc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
>> @@ -0,0 +1,23 @@
>> +* Bosch BMI088 IMU combining accelerometer and gyroscope
>> +
>> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
>> +
>> +Required properties:
>> +
>> + - compatible : should be "bosch,bmi088_accel"
>> + - reg : the I2C address of the sensor or the SPI chip select number
>> +
>> +Optional properties:
>> +
>> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
>> + IRQ_TYPE_EDGE_RISING
>> +
>> +Example:
>> +
>> +bmi088_accel@1 {
>> + compatible = "bosch,bmi088_accel";
>> + reg = <1>;
>> + spi-max-frequency = <10000000>;
>> + interrupt-parent = <&gpio>;
>> + interrupts = <90 IRQ_TYPE_EDGE_RISING>;
>> +};
>
--
Mike Looijmans
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
2020-03-23 9:56 ` Mike Looijmans
@ 2020-03-23 16:41 ` Jonathan Cameron
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2020-03-23 16:41 UTC (permalink / raw)
To: Mike Looijmans
Cc: Jonathan Cameron, devicetree, linux-iio, linux-kernel, knaack.h,
lars, pmeerw, robh+dt, mark.rutland
On Mon, 23 Mar 2020 10:56:41 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:
> On 22-03-2020 18:37, Jonathan Cameron wrote:
> > On Mon, 16 Mar 2020 07:52:18 +0100
> > Mike Looijmans <mike.looijmans@topic.nl> wrote:
> >
> >> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> >> the accelerometer part.
> >>
> >> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> >> ---
> >> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++
> >
> > Sorry. All new DT bindings need to be in yaml format.
> >
> > Please put this in the same series as the driver.
>
> sooy, I noticed this too late, patches are underway in separate mails
> now. Hope that isn't a blocking issue?
For next version of either pull them together.
Jonathan
>
> >
> > Thanks,
> >
> > Jonathan
> >
> >> 1 file changed, 23 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> >> new file mode 100644
> >> index 000000000000..691a47726dbc
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> >> @@ -0,0 +1,23 @@
> >> +* Bosch BMI088 IMU combining accelerometer and gyroscope
> >> +
> >> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> >> +
> >> +Required properties:
> >> +
> >> + - compatible : should be "bosch,bmi088_accel"
> >> + - reg : the I2C address of the sensor or the SPI chip select number
> >> +
> >> +Optional properties:
> >> +
> >> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
> >> + IRQ_TYPE_EDGE_RISING
> >> +
> >> +Example:
> >> +
> >> +bmi088_accel@1 {
> >> + compatible = "bosch,bmi088_accel";
> >> + reg = <1>;
> >> + spi-max-frequency = <10000000>;
> >> + interrupt-parent = <&gpio>;
> >> + interrupts = <90 IRQ_TYPE_EDGE_RISING>;
> >> +};
> >
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-23 16:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-16 6:52 [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings Mike Looijmans
2020-03-22 17:37 ` Jonathan Cameron
2020-03-23 9:56 ` Mike Looijmans
2020-03-23 16:41 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).