From: Roderick Colenbrander <roderick@gaikai.com>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org, Chris Ye <lzye@google.com>,
Roderick Colenbrander <roderick.colenbrander@sony.com>
Subject: [PATCH 09/13] HID: playstation: add DualSense lightbar support
Date: Fri, 18 Dec 2020 22:23:32 -0800 [thread overview]
Message-ID: <20201219062336.72568-10-roderick@gaikai.com> (raw)
In-Reply-To: <20201219062336.72568-1-roderick@gaikai.com>
From: Roderick Colenbrander <roderick.colenbrander@sony.com>
Expose the DualSense its RGB lightbar using the new multicolor LED
framework.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
---
drivers/hid/Kconfig | 1 +
drivers/hid/hid-playstation.c | 124 ++++++++++++++++++++++++++++++++++
2 files changed, 125 insertions(+)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e6c67aaa1a1a..c80c81916f4a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -857,6 +857,7 @@ config HID_PLAYSTATION
tristate "PlayStation HID Driver"
default !EXPERT
depends on HID
+ select LEDS_CLASS_MULTICOLOR
select POWER_SUPPLY
help
Provides support for Sony PS5 controllers including support for
diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c
index 0b62bcb28d8a..f8cf82a27d43 100644
--- a/drivers/hid/hid-playstation.c
+++ b/drivers/hid/hid-playstation.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/input/mt.h>
+#include <linux/led-class-multicolor.h>
#include <linux/module.h>
#include <linux/crc32.h>
#include <asm/unaligned.h>
@@ -77,6 +78,9 @@ struct ps_calibration_data {
/* Flags for DualSense output report. */
#define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0)
#define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1)
+#define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2)
+#define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3)
+#define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1)
/* DualSense hardware limits */
#define DS_ACC_RES_PER_G 8192
@@ -106,6 +110,13 @@ struct dualsense {
uint8_t motor_left;
uint8_t motor_right;
+ /* RGB lightbar */
+ struct led_classdev_mc *lightbar;
+ bool update_lightbar;
+ uint8_t lightbar_red;
+ uint8_t lightbar_green;
+ uint8_t lightbar_blue;
+
struct work_struct output_worker;
void *output_report_dmabuf;
uint8_t output_seq; /* Sequence number for output report. */
@@ -396,6 +407,50 @@ static struct input_dev *ps_gamepad_create(struct hid_device *hdev,
return gamepad;
}
+/* Create a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */
+static struct led_classdev_mc *ps_lightbar_create(struct ps_device *ps_dev,
+ int (*brightness_set)(struct led_classdev *, enum led_brightness))
+{
+ struct hid_device *hdev = ps_dev->hdev;
+ struct led_classdev_mc *lightbar_mc_dev;
+ struct mc_subled *mc_led_info;
+ struct led_classdev *led_cdev;
+ int ret;
+
+ lightbar_mc_dev = devm_kzalloc(&hdev->dev, sizeof(*lightbar_mc_dev), GFP_KERNEL);
+ if (!lightbar_mc_dev)
+ return ERR_PTR(-ENOMEM);
+
+ mc_led_info = devm_kzalloc(&hdev->dev, 3*sizeof(*mc_led_info), GFP_KERNEL);
+ if (!mc_led_info)
+ return ERR_PTR(-ENOMEM);
+
+ mc_led_info[0].color_index = LED_COLOR_ID_RED;
+ mc_led_info[0].channel = 0;
+ mc_led_info[1].color_index = LED_COLOR_ID_GREEN;
+ mc_led_info[1].channel = 1;
+ mc_led_info[2].color_index = LED_COLOR_ID_BLUE;
+ mc_led_info[2].channel = 2;
+
+ lightbar_mc_dev->subled_info = mc_led_info;
+ lightbar_mc_dev->num_colors = 3;
+
+ led_cdev = &lightbar_mc_dev->led_cdev;
+ led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "playstation::%pMR::rgb",
+ ps_dev->mac_address);
+ led_cdev->brightness = 255;
+ led_cdev->max_brightness = 255;
+ led_cdev->brightness_set_blocking = brightness_set;
+
+ ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev);
+ if (ret < 0) {
+ hid_err(hdev, "Cannot register multicolor LED device\n");
+ return ERR_PTR(ret);
+ }
+
+ return lightbar_mc_dev;
+}
+
static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, int accel_res,
int gyro_range, int gyro_res)
{
@@ -580,6 +635,27 @@ static int dualsense_get_mac_address(struct dualsense *ds)
return ret;
}
+static int dualsense_lightbar_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+ struct hid_device *hdev = to_hid_device(cdev->dev->parent);
+ struct dualsense *ds = hid_get_drvdata(hdev);
+ unsigned long flags;
+
+ led_mc_calc_color_components(mc_cdev, brightness);
+
+ spin_lock_irqsave(&ds->base.lock, flags);
+ ds->update_lightbar = true;
+ ds->lightbar_red = mc_cdev->subled_info[0].brightness;
+ ds->lightbar_green = mc_cdev->subled_info[1].brightness;
+ ds->lightbar_blue = mc_cdev->subled_info[2].brightness;
+ spin_unlock_irqrestore(&ds->base.lock, flags);
+
+ schedule_work(&ds->output_worker);
+ return 0;
+}
+
static void dualsense_init_output_report(struct dualsense *ds, struct dualsense_output_report *rp,
void *buf)
{
@@ -661,6 +737,15 @@ static void dualsense_output_worker(struct work_struct *work)
ds->update_rumble = false;
}
+ if (ds->update_lightbar) {
+ common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE;
+ common->lightbar_red = ds->lightbar_red;
+ common->lightbar_green = ds->lightbar_green;
+ common->lightbar_blue = ds->lightbar_blue;
+
+ ds->update_lightbar = false;
+ }
+
spin_unlock_irqrestore(&ds->base.lock, flags);
dualsense_send_output_report(ds, &report);
@@ -841,6 +926,30 @@ static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_ef
return 0;
}
+static int dualsense_reset_leds(struct dualsense *ds)
+{
+ struct dualsense_output_report report;
+ uint8_t *buf;
+
+ buf = kzalloc(sizeof(struct dualsense_output_report_bt), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ dualsense_init_output_report(ds, &report, buf);
+ /* On Bluetooth the DualSense outputs an animation on the lightbar
+ * during startup and maintains a color afterwards. We need to explicitly
+ * reconfigure the lightbar before we can do any programming later on.
+ * In USB the lightbar is not on by default, but redoing the setup there
+ * doesn't hurt.
+ */
+ report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE;
+ report.common->lightbar_setup = 2; /* Fade light out. */
+ dualsense_send_output_report(ds, &report);
+
+ kfree(buf);
+ return 0;
+}
+
static struct ps_device *dualsense_create(struct hid_device *hdev)
{
struct dualsense *ds;
@@ -908,6 +1017,21 @@ static struct ps_device *dualsense_create(struct hid_device *hdev)
if (ret < 0)
goto err;
+ /* The hardware may have control over the LEDs (e.g. in Bluetooth on startup).
+ * Reset the LEDs (lightbar, mute, player leds), so we can control them
+ * from software.
+ */
+ ret = dualsense_reset_leds(ds);
+ if (ret < 0)
+ goto err;
+
+ ds->lightbar = ps_lightbar_create((struct ps_device *)ds,
+ dualsense_lightbar_set_brightness);
+ if (IS_ERR(ds->lightbar)) {
+ ret = PTR_ERR(ds->lightbar);
+ goto err;
+ }
+
return (struct ps_device *)ds;
err:
--
2.26.2
next prev parent reply other threads:[~2020-12-19 6:25 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-19 6:23 [PATCH 00/13] HID: new driver for PS5 'DualSense' controller Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 01/13] HID: playstation: initial DualSense USB support Roderick Colenbrander
2020-12-27 16:23 ` Barnabás Pőcze
2020-12-27 23:04 ` Roderick Colenbrander
2020-12-29 19:12 ` Barnabás Pőcze
2020-12-31 0:08 ` Barnabás Pőcze
2020-12-31 1:08 ` Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 02/13] HID: playstation: use DualSense MAC address as unique identifier Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 03/13] HID: playstation: add DualSense battery support Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 04/13] HID: playstation: add DualSense touchpad support Roderick Colenbrander
2020-12-26 2:14 ` Samuel Čavoj
2020-12-26 22:27 ` Roderick Colenbrander
2020-12-29 19:49 ` Barnabás Pőcze
2020-12-29 21:44 ` Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 05/13] HID: playstation: add DualSense accelerometer and gyroscope support Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 06/13] HID: playstation: track devices in list Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 07/13] HID: playstation: add DualSense Bluetooth support Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 08/13] HID: playstation: add DualSense classic rumble support Roderick Colenbrander
2020-12-19 6:23 ` Roderick Colenbrander [this message]
2020-12-27 14:41 ` [PATCH 09/13] HID: playstation: add DualSense lightbar support Barnabás Pőcze
2020-12-28 21:26 ` Roderick Colenbrander
2020-12-29 18:59 ` Barnabás Pőcze
2020-12-29 19:54 ` Roderick Colenbrander
2020-12-29 20:22 ` Barnabás Pőcze
2020-12-19 6:23 ` [PATCH 10/13] HID: playstation: add microphone mute support for DualSense Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 11/13] HID: playstation: add DualSense player LEDs support Roderick Colenbrander
2020-12-26 19:27 ` Samuel Čavoj
2020-12-26 23:07 ` Roderick Colenbrander
2020-12-27 14:27 ` Barnabás Pőcze
2020-12-28 22:02 ` Roderick Colenbrander
2020-12-29 18:49 ` Barnabás Pőcze
2020-12-19 6:23 ` [PATCH 12/13] HID: playstation: DualSense set LEDs to default player id Roderick Colenbrander
2020-12-27 0:08 ` Samuel Čavoj
2020-12-27 23:07 ` Roderick Colenbrander
2020-12-19 6:23 ` [PATCH 13/13] HID: playstation: report DualSense hardware and firmware version Roderick Colenbrander
2020-12-27 17:06 ` Barnabás Pőcze
2020-12-27 22:21 ` Roderick Colenbrander
2020-12-27 22:27 ` Roderick Colenbrander
2020-12-27 22:37 ` Barnabás Pőcze
2020-12-28 22:45 ` Roderick Colenbrander
2020-12-29 15:10 ` Barnabás Pőcze
2020-12-19 8:38 ` [PATCH 00/13] HID: new driver for PS5 'DualSense' controller Bastien Nocera
2020-12-19 22:39 ` Roderick.Colenbrander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201219062336.72568-10-roderick@gaikai.com \
--to=roderick@gaikai.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=lzye@google.com \
--cc=roderick.colenbrander@sony.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).