linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roderick Colenbrander <roderick@gaikai.com>
To: "Samuel Čavoj" <samuel@cavoj.net>
Cc: Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	linux-input@vger.kernel.org, Chris Ye <lzye@google.com>,
	Roderick Colenbrander <roderick.colenbrander@sony.com>
Subject: Re: [PATCH 04/13] HID: playstation: add DualSense touchpad support.
Date: Sat, 26 Dec 2020 14:27:00 -0800	[thread overview]
Message-ID: <CANndSKkqfok=4_eF3tGCRksT5farjoWmNEZDc7ZWkT0BooQSnQ@mail.gmail.com> (raw)
In-Reply-To: <20201226021456.gmnqkycoeqvdhk34@fastboi.localdomain>

Hi Samuel,

Thanks for your review.


On Fri, Dec 25, 2020 at 6:14 PM Samuel Čavoj <samuel@cavoj.net> wrote:
>
> Hello,
>
> thank you for this driver. It makes me really happy to see an official
> one. Just a small thing I noticed while reading through it:
>
>
> On 18.12.2020 22:23, Roderick Colenbrander wrote:
> > @@ -311,6 +345,25 @@ static int dualsense_parse_report(struct ps_device *ps_dev, struct hid_report *r
> >       input_report_key(ds->gamepad, BTN_MODE, ds_report->buttons[2] & DS_BUTTONS2_PS_HOME);
> >       input_sync(ds->gamepad);
> >
> > +     input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD);
>
> The above line is duplicated right before the input_sync (marked). Is
> there any reason for this or is it accidental?

Good catch. It was purely accidental as the code went through many
rebases and code shuffling. So a little artifact..

>
> > +     for (i = 0; i < 2; i++) {
> > +             bool active = (ds_report->points[i].contact & 0x80) ? false : true;
> > +
> > +             input_mt_slot(ds->touchpad, i);
> > +             input_mt_report_slot_state(ds->touchpad, MT_TOOL_FINGER, active);
> > +
> > +             if (active) {
> > +                     int x = (ds_report->points[i].x_hi << 8) | ds_report->points[i].x_lo;
> > +                     int y = (ds_report->points[i].y_hi << 4) | ds_report->points[i].y_lo;
> > +
> > +                     input_report_abs(ds->touchpad, ABS_MT_POSITION_X, x);
> > +                     input_report_abs(ds->touchpad, ABS_MT_POSITION_Y, y);
> > +             }
> > +     }
> > +     input_mt_sync_frame(ds->touchpad);
> > +     input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD);
>
> Right here.

I will probably keep this one and take the other one out as this is
next to the other touchpad code.

>
> > +     input_sync(ds->touchpad);
> > +
>
> Regards,
> Samuel

Thanks,
Roderick

  reply	other threads:[~2020-12-26 22:28 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-19  6:23 [PATCH 00/13] HID: new driver for PS5 'DualSense' controller Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 01/13] HID: playstation: initial DualSense USB support Roderick Colenbrander
2020-12-27 16:23   ` Barnabás Pőcze
2020-12-27 23:04     ` Roderick Colenbrander
2020-12-29 19:12       ` Barnabás Pőcze
2020-12-31  0:08   ` Barnabás Pőcze
2020-12-31  1:08     ` Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 02/13] HID: playstation: use DualSense MAC address as unique identifier Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 03/13] HID: playstation: add DualSense battery support Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 04/13] HID: playstation: add DualSense touchpad support Roderick Colenbrander
2020-12-26  2:14   ` Samuel Čavoj
2020-12-26 22:27     ` Roderick Colenbrander [this message]
2020-12-29 19:49   ` Barnabás Pőcze
2020-12-29 21:44     ` Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 05/13] HID: playstation: add DualSense accelerometer and gyroscope support Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 06/13] HID: playstation: track devices in list Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 07/13] HID: playstation: add DualSense Bluetooth support Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 08/13] HID: playstation: add DualSense classic rumble support Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 09/13] HID: playstation: add DualSense lightbar support Roderick Colenbrander
2020-12-27 14:41   ` Barnabás Pőcze
2020-12-28 21:26     ` Roderick Colenbrander
2020-12-29 18:59       ` Barnabás Pőcze
2020-12-29 19:54         ` Roderick Colenbrander
2020-12-29 20:22           ` Barnabás Pőcze
2020-12-19  6:23 ` [PATCH 10/13] HID: playstation: add microphone mute support for DualSense Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 11/13] HID: playstation: add DualSense player LEDs support Roderick Colenbrander
2020-12-26 19:27   ` Samuel Čavoj
2020-12-26 23:07     ` Roderick Colenbrander
2020-12-27 14:27   ` Barnabás Pőcze
2020-12-28 22:02     ` Roderick Colenbrander
2020-12-29 18:49       ` Barnabás Pőcze
2020-12-19  6:23 ` [PATCH 12/13] HID: playstation: DualSense set LEDs to default player id Roderick Colenbrander
2020-12-27  0:08   ` Samuel Čavoj
2020-12-27 23:07     ` Roderick Colenbrander
2020-12-19  6:23 ` [PATCH 13/13] HID: playstation: report DualSense hardware and firmware version Roderick Colenbrander
2020-12-27 17:06   ` Barnabás Pőcze
2020-12-27 22:21     ` Roderick Colenbrander
2020-12-27 22:27       ` Roderick Colenbrander
2020-12-27 22:37         ` Barnabás Pőcze
2020-12-28 22:45           ` Roderick Colenbrander
2020-12-29 15:10             ` Barnabás Pőcze
2020-12-19  8:38 ` [PATCH 00/13] HID: new driver for PS5 'DualSense' controller Bastien Nocera
2020-12-19 22:39   ` Roderick.Colenbrander

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANndSKkqfok=4_eF3tGCRksT5farjoWmNEZDc7ZWkT0BooQSnQ@mail.gmail.com' \
    --to=roderick@gaikai.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=lzye@google.com \
    --cc=roderick.colenbrander@sony.com \
    --cc=samuel@cavoj.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).