Linux-Integrity Archive on lore.kernel.org
 help / color / Atom feed
From: Nayna Jain <nayna@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org,
	linux-integrity@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Jeremy Kerr <jk@ozlabs.org>,
	Matthew Garret <matthew.garret@nebula.com>,
	Mimi Zohar <zohar@linux.ibm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Claudio Carvalho <cclaudio@linux.ibm.com>,
	George Wilson <gcwilson@linux.ibm.com>,
	Elaine Palmer <erpalmer@us.ibm.com>,
	Eric Ricther <erichte@linux.ibm.com>,
	"Oliver O'Halloran" <oohall@gmail.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	Prakhar Srivastava <prsriva02@gmail.com>,
	Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Subject: [PATCH v9 2/8] powerpc/ima: add support to initialize ima policy rules
Date: Wed, 23 Oct 2019 22:47:11 -0500
Message-ID: <20191024034717.70552-3-nayna@linux.ibm.com> (raw)
In-Reply-To: <20191024034717.70552-1-nayna@linux.ibm.com>

PowerNV system use a Linux-based bootloader, which relies on the IMA
subsystem to enforce different secure boot modes. Since the verification
policy may differ based on the secure boot mode of the system, the
policies must be defined at runtime.

This patch implements arch-specific support to define IMA policy
rules based on the runtime secure boot mode of the system.

This patch provides arch-specific IMA policies if PPC_SECURE_BOOT
config is enabled.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
---
 arch/powerpc/Kconfig           |  1 +
 arch/powerpc/kernel/Makefile   |  2 +-
 arch/powerpc/kernel/ima_arch.c | 43 ++++++++++++++++++++++++++++++++++
 include/linux/ima.h            |  3 ++-
 4 files changed, 47 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/kernel/ima_arch.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 56ea0019b616..c795039bdc73 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -938,6 +938,7 @@ config PPC_SECURE_BOOT
 	prompt "Enable secure boot support"
 	bool
 	depends on PPC_POWERNV
+	depends on IMA_ARCH_POLICY
 	help
 	  Systems with firmware secure boot enabled need to define security
 	  policies to extend secure boot to the OS. This config allows a user
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index e2a54fa240ac..e8eb2955b7d5 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -161,7 +161,7 @@ ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),)
 obj-y				+= ucall.o
 endif
 
-obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o
+obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
diff --git a/arch/powerpc/kernel/ima_arch.c b/arch/powerpc/kernel/ima_arch.c
new file mode 100644
index 000000000000..d88913dc0da7
--- /dev/null
+++ b/arch/powerpc/kernel/ima_arch.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain
+ */
+
+#include <linux/ima.h>
+#include <asm/secure_boot.h>
+
+bool arch_ima_get_secureboot(void)
+{
+	return is_ppc_secureboot_enabled();
+}
+
+/*
+ * The "secure_rules" are enabled only on "secureboot" enabled systems.
+ * These rules verify the file signatures against known good values.
+ * The "appraise_type=imasig|modsig" option allows the known good signature
+ * to be stored as an xattr or as an appended signature.
+ *
+ * To avoid duplicate signature verification as much as possible, the IMA
+ * policy rule for module appraisal is added only if CONFIG_MODULE_SIG_FORCE
+ * is not enabled.
+ */
+static const char *const secure_rules[] = {
+	"appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig",
+#ifndef CONFIG_MODULE_SIG_FORCE
+	"appraise func=MODULE_CHECK appraise_type=imasig|modsig",
+#endif
+	NULL
+};
+
+/*
+ * Returns the relevant IMA arch-specific policies based on the system secure
+ * boot state.
+ */
+const char *const *arch_get_ima_policy(void)
+{
+	if (is_ppc_secureboot_enabled())
+		return secure_rules;
+
+	return NULL;
+}
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 1c37f17f7203..6d904754d858 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -29,7 +29,8 @@ extern void ima_kexec_cmdline(const void *buf, int size);
 extern void ima_add_kexec_buffer(struct kimage *image);
 #endif
 
-#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390)
+#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
+	|| defined(CONFIG_PPC_SECURE_BOOT)
 extern bool arch_ima_get_secureboot(void);
 extern const char * const *arch_get_ima_policy(void);
 #else
-- 
2.20.1


  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24  3:47 [PATCH v9 0/8] powerpc: Enabling IMA arch specific secure boot policies Nayna Jain
2019-10-24  3:47 ` [PATCH v9 1/8] powerpc: detect the secure boot mode of the system Nayna Jain
2019-10-24 17:26   ` Lakshmi Ramasubramanian
2019-10-25 16:49     ` Nayna Jain
2019-10-24  3:47 ` Nayna Jain [this message]
2019-10-24 17:35   ` [PATCH v9 2/8] powerpc/ima: add support to initialize ima policy rules Lakshmi Ramasubramanian
2019-10-25 17:02     ` Nayna Jain
2019-10-25 18:03       ` Lakshmi Ramasubramanian
2019-10-28 23:42         ` Michael Ellerman
2019-10-26 23:52       ` Mimi Zohar
2019-10-28 11:54         ` Mimi Zohar
2019-10-24  3:47 ` [PATCH v9 3/8] powerpc: detect the trusted boot state of the system Nayna Jain
2019-10-24 17:38   ` Lakshmi Ramasubramanian
2019-10-25 16:50     ` Nayna Jain
2019-10-24  3:47 ` [PATCH v9 4/8] powerpc/ima: define trusted boot policy Nayna Jain
2019-10-24 17:40   ` Lakshmi Ramasubramanian
2019-10-24  3:47 ` [PATCH v9 5/8] ima: make process_buffer_measurement() generic Nayna Jain
2019-10-24 15:20   ` Lakshmi Ramasubramanian
2019-10-25 17:24     ` Nayna Jain
2019-10-25 17:32       ` Lakshmi Ramasubramanian
2019-10-27  0:13         ` Mimi Zohar
2019-10-30 15:22   ` Lakshmi Ramasubramanian
2019-10-30 16:35     ` Mimi Zohar
2019-10-24  3:47 ` [PATCH v9 6/8] certs: add wrapper function to check blacklisted binary hash Nayna Jain
2019-10-24  3:47 ` [PATCH v9 7/8] ima: check against blacklisted hashes for files with modsig Nayna Jain
2019-10-24 17:48   ` Lakshmi Ramasubramanian
2019-10-25 17:36     ` Nayna Jain
2019-10-24  3:47 ` [PATCH v9 8/8] powerpc/ima: update ima arch policy to check for blacklist Nayna Jain
2019-10-28 12:10 ` [PATCH v9 0/8] powerpc: Enabling IMA arch specific secure boot policies Mimi Zohar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024034717.70552-3-nayna@linux.ibm.com \
    --to=nayna@linux.ibm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=benh@kernel.crashing.org \
    --cc=cclaudio@linux.ibm.com \
    --cc=erichte@linux.ibm.com \
    --cc=erpalmer@us.ibm.com \
    --cc=gcwilson@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jk@ozlabs.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=matthew.garret@nebula.com \
    --cc=mpe@ellerman.id.au \
    --cc=nramas@linux.microsoft.com \
    --cc=oohall@gmail.com \
    --cc=paulus@samba.org \
    --cc=prsriva02@gmail.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Integrity Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \
		linux-integrity@vger.kernel.org
	public-inbox-index linux-integrity

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git