From: Zdenek Kabelac <zkabelac@redhat.com>
To: Gionatan Danti <g.danti@assyoma.it>
Cc: LVM general discussion and development <linux-lvm@redhat.com>
Subject: Re: [linux-lvm] Snapshot behavior on classic LVM vs ThinLVM
Date: Wed, 26 Apr 2017 13:23:44 +0200 [thread overview]
Message-ID: <20ddda25-dacf-f4e2-8df4-f9bed1c62fe7@redhat.com> (raw)
In-Reply-To: <4fb6f017d9734892eff6b0ef544d99fc@assyoma.it>
Dne 26.4.2017 v 10:10 Gionatan Danti napsal(a):
>
> I'm not sure this is sufficient. In my testing, ext4 will *not* remount-ro on
> any error, rather only on erroneous metadata updates. For example, on a
> thinpool with "--errorwhenfull y", trying to overcommit data with a simple "dd
> if=/dev/zero of=/mnt/thinvol bs=1M count=1024 oflag=sync" will cause I/O
> errors (as shown by dmesg), but the filesystem is *not* immediately remounted
> read-only. Rather, after some time, a failed journal update will remount it
> read-only.
You need to use 'direct' write more - otherwise you are just witnessing issues
related with 'page-cache' flushing.
Every update of file means update of journal - so you surely can lose some
data in-flight - but every good software needs to the flush before doing next
transaction - so with correctly working transaction software no data could be
lost.
>
> XFS should behave similarly, with the exception that it will shutdown the
> entire filesystem (ie: not even reads are allowed) when metadata errors are
> detected (see note n.1).
Yep - XFS is slightly different - but it gets improved, however some new
features are not enabled by default and user needs to enabled them.
Regards
Zdenek
next prev parent reply other threads:[~2017-04-26 11:23 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-06 14:31 [linux-lvm] Snapshot behavior on classic LVM vs ThinLVM Gionatan Danti
2017-04-07 8:19 ` Mark Mielke
2017-04-07 9:12 ` Gionatan Danti
2017-04-07 13:50 ` L A Walsh
2017-04-07 16:33 ` Gionatan Danti
2017-04-13 12:59 ` Stuart Gathman
2017-04-13 13:52 ` Xen
2017-04-13 14:33 ` Zdenek Kabelac
2017-04-13 14:47 ` Xen
2017-04-13 15:29 ` Stuart Gathman
2017-04-13 15:43 ` Xen
2017-04-13 17:26 ` Stuart D. Gathman
2017-04-13 17:32 ` Stuart D. Gathman
2017-04-14 15:17 ` Xen
2017-04-14 7:27 ` Gionatan Danti
2017-04-14 7:23 ` Gionatan Danti
2017-04-14 15:23 ` Xen
2017-04-14 15:53 ` Gionatan Danti
2017-04-14 16:08 ` Stuart Gathman
2017-04-14 17:36 ` Xen
2017-04-14 18:59 ` Gionatan Danti
2017-04-14 19:20 ` Xen
2017-04-15 8:27 ` Xen
2017-04-15 23:35 ` Xen
2017-04-17 12:33 ` Xen
2017-04-15 21:22 ` Xen
2017-04-15 21:49 ` Xen
2017-04-15 21:48 ` Xen
2017-04-18 10:17 ` Zdenek Kabelac
2017-04-18 13:23 ` Gionatan Danti
2017-04-18 14:32 ` Stuart D. Gathman
2017-04-19 7:22 ` Xen
2017-04-07 22:24 ` Mark Mielke
2017-04-08 11:56 ` Gionatan Danti
2017-04-07 18:21 ` Tomas Dalebjörk
2017-04-13 10:20 ` Gionatan Danti
2017-04-13 12:41 ` Xen
2017-04-14 7:20 ` Gionatan Danti
2017-04-14 8:24 ` Zdenek Kabelac
2017-04-14 9:07 ` Gionatan Danti
2017-04-14 9:37 ` Zdenek Kabelac
2017-04-14 9:55 ` Gionatan Danti
2017-04-22 7:14 ` Gionatan Danti
2017-04-22 16:32 ` Xen
2017-04-22 20:58 ` Gionatan Danti
2017-04-22 21:17 ` Zdenek Kabelac
2017-04-23 5:29 ` Xen
2017-04-23 9:26 ` Zdenek Kabelac
2017-04-24 21:02 ` Xen
2017-04-24 21:59 ` Zdenek Kabelac
2017-04-26 7:26 ` Gionatan Danti
2017-04-26 7:42 ` Zdenek Kabelac
2017-04-26 8:10 ` Gionatan Danti
2017-04-26 11:23 ` Zdenek Kabelac [this message]
2017-04-26 13:37 ` Gionatan Danti
2017-04-26 14:33 ` Zdenek Kabelac
2017-04-26 16:37 ` Gionatan Danti
2017-04-26 18:32 ` Stuart Gathman
2017-04-26 19:24 ` Stuart Gathman
2017-05-02 11:00 ` Gionatan Danti
2017-05-12 13:02 ` Gionatan Danti
2017-05-12 13:42 ` Joe Thornber
2017-05-14 20:39 ` Gionatan Danti
2017-05-15 12:50 ` Zdenek Kabelac
2017-05-15 14:48 ` Gionatan Danti
2017-05-15 15:33 ` Zdenek Kabelac
2017-05-16 7:53 ` Gionatan Danti
2017-05-16 10:54 ` Zdenek Kabelac
2017-05-16 13:38 ` Gionatan Danti
2018-02-27 18:39 ` Xen
2018-02-28 9:26 ` Zdenek Kabelac
2018-02-28 19:07 ` Gionatan Danti
2018-02-28 21:43 ` Zdenek Kabelac
2018-03-01 7:14 ` Gionatan Danti
2018-03-01 8:31 ` Zdenek Kabelac
2018-03-01 9:43 ` Gianluca Cecchi
2018-03-01 11:10 ` Zdenek Kabelac
2018-03-01 9:52 ` Gionatan Danti
2018-03-01 11:23 ` Zdenek Kabelac
2018-03-01 12:48 ` Gionatan Danti
2018-03-01 16:00 ` Zdenek Kabelac
2018-03-01 16:26 ` Gionatan Danti
2018-03-03 18:32 ` Xen
2018-03-04 20:34 ` Zdenek Kabelac
2018-03-03 18:17 ` Xen
2018-03-04 20:53 ` Zdenek Kabelac
2018-03-05 9:42 ` Gionatan Danti
2018-03-05 10:18 ` Zdenek Kabelac
2018-03-05 14:27 ` Gionatan Danti
2018-03-03 17:52 ` Xen
2018-03-04 23:27 ` Zdenek Kabelac
2017-04-22 21:22 ` Zdenek Kabelac
2017-04-24 13:49 ` Gionatan Danti
2017-04-24 14:48 ` Zdenek Kabelac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20ddda25-dacf-f4e2-8df4-f9bed1c62fe7@redhat.com \
--to=zkabelac@redhat.com \
--cc=g.danti@assyoma.it \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).