From: Gionatan Danti <g.danti@assyoma.it>
To: LVM general discussion and development <linux-lvm@redhat.com>
Cc: Mark Mielke <mark.mielke@gmail.com>, L A Walsh <lvm@tlinx.org>
Subject: Re: [linux-lvm] Snapshot behavior on classic LVM vs ThinLVM
Date: Fri, 07 Apr 2017 18:33:47 +0200 [thread overview]
Message-ID: <dc7ab70743a92705e6be6fefab2d29d0@assyoma.it> (raw)
In-Reply-To: <58E7992A.4030000@tlinx.org>
Il 07-04-2017 15:50 L A Walsh ha scritto:
> Gionatan Danti wrote:
>> I more concerned about lenghtly snapshot activation due to a big,
>> linear CoW table that must be read completely...
> ---
> What is 'big'? Are you just worried about the IO time?
> If that's the case, much will depend on your HW. Are we talking
> using 8T hard disks concatenated into a single volume, or in a
> RAID1, or what? W/a HW-RAID10 getting over 1GB/s isn't
> difficult for a contiguous read. So how big is the CoW table
> and how fragmented is it? Even w/fragments, with enough spindles
> you could still, likely, get enough I/O Ops where I/O speed shouldn't
> be a critical bottleneck...
For the logical volume itself, I target a 8+ TB size. However, what
worries me is *not* LV size by itself (I know that LVM can be used on
volume much bigger than that), rather the snapshot CoW table. In short,
from reading this list and from first-hand testing, big snapshots (20+
GB) require lenghtly activation, due to inefficiency in how classic
metadata (ie: non thinly-provided) are layed out/used. However, I read
that this was somewhat addressed lately. Do you have any insight?
--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti@assyoma.it - info@assyoma.it
GPG public key ID: FF5F32A8
next prev parent reply other threads:[~2017-04-07 16:33 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-06 14:31 [linux-lvm] Snapshot behavior on classic LVM vs ThinLVM Gionatan Danti
2017-04-07 8:19 ` Mark Mielke
2017-04-07 9:12 ` Gionatan Danti
2017-04-07 13:50 ` L A Walsh
2017-04-07 16:33 ` Gionatan Danti [this message]
2017-04-13 12:59 ` Stuart Gathman
2017-04-13 13:52 ` Xen
2017-04-13 14:33 ` Zdenek Kabelac
2017-04-13 14:47 ` Xen
2017-04-13 15:29 ` Stuart Gathman
2017-04-13 15:43 ` Xen
2017-04-13 17:26 ` Stuart D. Gathman
2017-04-13 17:32 ` Stuart D. Gathman
2017-04-14 15:17 ` Xen
2017-04-14 7:27 ` Gionatan Danti
2017-04-14 7:23 ` Gionatan Danti
2017-04-14 15:23 ` Xen
2017-04-14 15:53 ` Gionatan Danti
2017-04-14 16:08 ` Stuart Gathman
2017-04-14 17:36 ` Xen
2017-04-14 18:59 ` Gionatan Danti
2017-04-14 19:20 ` Xen
2017-04-15 8:27 ` Xen
2017-04-15 23:35 ` Xen
2017-04-17 12:33 ` Xen
2017-04-15 21:22 ` Xen
2017-04-15 21:49 ` Xen
2017-04-15 21:48 ` Xen
2017-04-18 10:17 ` Zdenek Kabelac
2017-04-18 13:23 ` Gionatan Danti
2017-04-18 14:32 ` Stuart D. Gathman
2017-04-19 7:22 ` Xen
2017-04-07 22:24 ` Mark Mielke
2017-04-08 11:56 ` Gionatan Danti
2017-04-07 18:21 ` Tomas Dalebjörk
2017-04-13 10:20 ` Gionatan Danti
2017-04-13 12:41 ` Xen
2017-04-14 7:20 ` Gionatan Danti
2017-04-14 8:24 ` Zdenek Kabelac
2017-04-14 9:07 ` Gionatan Danti
2017-04-14 9:37 ` Zdenek Kabelac
2017-04-14 9:55 ` Gionatan Danti
2017-04-22 7:14 ` Gionatan Danti
2017-04-22 16:32 ` Xen
2017-04-22 20:58 ` Gionatan Danti
2017-04-22 21:17 ` Zdenek Kabelac
2017-04-23 5:29 ` Xen
2017-04-23 9:26 ` Zdenek Kabelac
2017-04-24 21:02 ` Xen
2017-04-24 21:59 ` Zdenek Kabelac
2017-04-26 7:26 ` Gionatan Danti
2017-04-26 7:42 ` Zdenek Kabelac
2017-04-26 8:10 ` Gionatan Danti
2017-04-26 11:23 ` Zdenek Kabelac
2017-04-26 13:37 ` Gionatan Danti
2017-04-26 14:33 ` Zdenek Kabelac
2017-04-26 16:37 ` Gionatan Danti
2017-04-26 18:32 ` Stuart Gathman
2017-04-26 19:24 ` Stuart Gathman
2017-05-02 11:00 ` Gionatan Danti
2017-05-12 13:02 ` Gionatan Danti
2017-05-12 13:42 ` Joe Thornber
2017-05-14 20:39 ` Gionatan Danti
2017-05-15 12:50 ` Zdenek Kabelac
2017-05-15 14:48 ` Gionatan Danti
2017-05-15 15:33 ` Zdenek Kabelac
2017-05-16 7:53 ` Gionatan Danti
2017-05-16 10:54 ` Zdenek Kabelac
2017-05-16 13:38 ` Gionatan Danti
2018-02-27 18:39 ` Xen
2018-02-28 9:26 ` Zdenek Kabelac
2018-02-28 19:07 ` Gionatan Danti
2018-02-28 21:43 ` Zdenek Kabelac
2018-03-01 7:14 ` Gionatan Danti
2018-03-01 8:31 ` Zdenek Kabelac
2018-03-01 9:43 ` Gianluca Cecchi
2018-03-01 11:10 ` Zdenek Kabelac
2018-03-01 9:52 ` Gionatan Danti
2018-03-01 11:23 ` Zdenek Kabelac
2018-03-01 12:48 ` Gionatan Danti
2018-03-01 16:00 ` Zdenek Kabelac
2018-03-01 16:26 ` Gionatan Danti
2018-03-03 18:32 ` Xen
2018-03-04 20:34 ` Zdenek Kabelac
2018-03-03 18:17 ` Xen
2018-03-04 20:53 ` Zdenek Kabelac
2018-03-05 9:42 ` Gionatan Danti
2018-03-05 10:18 ` Zdenek Kabelac
2018-03-05 14:27 ` Gionatan Danti
2018-03-03 17:52 ` Xen
2018-03-04 23:27 ` Zdenek Kabelac
2017-04-22 21:22 ` Zdenek Kabelac
2017-04-24 13:49 ` Gionatan Danti
2017-04-24 14:48 ` Zdenek Kabelac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc7ab70743a92705e6be6fefab2d29d0@assyoma.it \
--to=g.danti@assyoma.it \
--cc=linux-lvm@redhat.com \
--cc=lvm@tlinx.org \
--cc=mark.mielke@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).