linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brad Love <brad@nextdimension.cc>
To: linux-media@vger.kernel.org
Cc: Brad Love <brad@nextdimension.cc>
Subject: [PATCH v2 11/12] si2157: add on-demand rf strength func
Date: Wed, 27 Feb 2019 12:27:45 -0600	[thread overview]
Message-ID: <1551292066-29574-12-git-send-email-brad@nextdimension.cc> (raw)
In-Reply-To: <1551292066-29574-1-git-send-email-brad@nextdimension.cc>

Add get_rf_strength callback to get RSSI from the tuner. DVBv5
stat cache is updated. get_rf_strength is called by tuner_core
for analog tuners and is also used by some bridge drivers to
obtain RSSI directly from the tuner.

Signed-off-by: Brad Love <brad@nextdimension.cc>
---
Changes since v1:
- simplify normalization of signal strength calculation
- use clamp and add description of operation
- remove __func__ from dev_dbg macro

 drivers/media/tuners/si2157.c | 40 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 36b2ea8..5ce7562 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -735,6 +735,42 @@ static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 	return 0;
 }
 
+static int si2157_get_rf_strength(struct dvb_frontend *fe, u16 *rssi)
+{
+	struct i2c_client *client = fe->tuner_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct si2157_cmd cmd;
+	int ret;
+	int strength;
+
+	dev_dbg(&client->dev, "\n");
+
+	memcpy(cmd.args, "\x42\x00", 2);
+	cmd.wlen = 2;
+	cmd.rlen = 12;
+	ret = si2157_cmd_execute(client, &cmd);
+	if (ret)
+		goto err;
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].svalue = (s8) cmd.args[3] * 1000;
+
+	/* normalize values based on Silicon Labs reference
+	 * add 100, then anything > 80 is 100% signal
+	 */
+	strength = (s8)cmd.args[3] + 100;
+	strength = clamp_val(strength, 0, 80);
+	*rssi = (u16)(strength * 0xffff / 80);
+
+	dev_dbg(&client->dev, "strength=%d rssi=%u\n",
+		(s8)cmd.args[3], *rssi);
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed=%d\n", ret);
+	return ret;
+}
+
 static const struct dvb_tuner_ops si2157_ops = {
 	.info = {
 		.name             = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158",
@@ -748,7 +784,9 @@ static const struct dvb_tuner_ops si2157_ops = {
 	.set_analog_params = si2157_set_analog_params,
 	.get_frequency     = si2157_get_frequency,
 	.get_bandwidth     = si2157_get_bandwidth,
-	.get_if_frequency = si2157_get_if_frequency,
+	.get_if_frequency  = si2157_get_if_frequency,
+
+	.get_rf_strength   = si2157_get_rf_strength,
 };
 
 static void si2157_stat_work(struct work_struct *work)
-- 
2.7.4


  parent reply	other threads:[~2019-02-27 18:28 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-29 17:51 [PATCH 00/13] si2157: Analog tuning and optimizations Brad Love
2018-12-29 17:51 ` [PATCH 01/13] si2157: Enable tuner status flags Brad Love
2018-12-29 17:51 ` [PATCH 02/13] si2157: Check error status bit on cmd execute Brad Love
2019-01-09 18:01   ` Antti Palosaari
2019-01-15 17:28     ` Brad Love
2018-12-29 17:51 ` [PATCH 03/13] si2157: Better check for running tuner in init Brad Love
2018-12-29 17:51 ` [PATCH 04/13] si2157: Add clock and pin setup for si2141 Brad Love
2019-01-20 17:17   ` Antti Palosaari
2019-01-22 17:10     ` Brad Love
2018-12-29 17:51 ` [PATCH 05/13] cx25840: Register labeling, chip specific correction Brad Love
2018-12-29 17:51 ` [PATCH 06/13] si2157: Add analog tuning related functions Brad Love
2018-12-29 17:51 ` [PATCH 07/13] si2157: Briefly wait for tuning operation to complete Brad Love
2019-04-05 10:29   ` Sean Young
2019-04-08 18:14     ` Brad Love
2019-04-08 20:55       ` Sean Young
2019-04-08 21:37         ` Brad Love
2019-04-10 14:48           ` Brad Love
2018-12-29 17:51 ` [PATCH 08/13] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2018-12-29 17:51 ` [PATCH 09/13] cx23885: Add analog tuner to 1265_K4 Brad Love
2018-12-29 17:51 ` [PATCH 11/13] cx23885: Add i2c device analog tuner support Brad Love
2018-12-29 17:51 ` [PATCH 10/13] cx231xx: " Brad Love
2018-12-29 17:51 ` [PATCH 12/13] si2157: add on-demand rf strength func Brad Love
2019-01-20 19:09   ` Antti Palosaari
2018-12-29 17:51 ` [PATCH 13/13] lgdt3306a: Add CNR v5 stat Brad Love
2019-02-27 18:27 ` [PATCH v2 00/13] si2157: Analog tuning and optimizations Brad Love
2019-02-27 18:27   ` [PATCH v2 01/12] si2157: Enable tuner status flags Brad Love
2019-02-27 18:27   ` [PATCH v2 02/12] si2157: Check error status bit on cmd execute Brad Love
2019-02-27 18:27   ` [PATCH v2 03/12] si2157: Better check for running tuner in init Brad Love
2019-02-27 18:27   ` [PATCH v2 04/12] cx25840: Register labeling, chip specific correction Brad Love
2019-02-27 18:27   ` [PATCH v2 05/12] si2157: Add analog tuning related functions Brad Love
2019-04-05 13:24     ` Sean Young
2019-04-08 18:18       ` Brad Love
2019-02-27 18:27   ` [PATCH v2 06/12] si2157: Briefly wait for tuning operation to complete Brad Love
2019-02-27 18:27   ` [PATCH v2 07/12] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2019-02-27 18:27   ` [PATCH v2 08/12] cx23885: Add analog frontend to 1265_K4 Brad Love
2019-02-27 18:27   ` [PATCH v2 09/12] cx23885: Add i2c device analog tuner support Brad Love
2019-02-27 18:27   ` [PATCH v2 10/12] cx231xx: " Brad Love
2019-02-27 18:27   ` Brad Love [this message]
2019-02-27 18:27   ` [PATCH v2 12/12] lgdt3306a: Add CNR v5 stat Brad Love

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1551292066-29574-12-git-send-email-brad@nextdimension.cc \
    --to=brad@nextdimension.cc \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).